Used Swivel Spindle for sale (14,789)

Condition: good (used), Cup wheel diameter: 175 mm Table clamping surface: 150 x 250 mm Max. installation height without/with magnetic chuck: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Psdjyvfq Eepfx Ahvegi Required space approx.: 800 x 600 x 1600 mm Weight approx.: 200 kg

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg Pjdor Ig H Tjpfx Ahvogi - immediately available -

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press by Hiller & Lutz Year of manufacture: 1980 Fully functional In good used condition Technical details: The Hiller & Lutz HP71 is a classic, robust manual spindle press (also referred to as an arch press), widely used in metalworking shops, workshops, and industrial environments for straightening, bending, pressing-in, or punching operations. Here are the standard technical specifications for this model (values may vary slightly depending on year of manufacture): - Press force: approx. 20 to 25 tons (the "71" model number typically refers to frame size/width; actual force depends on spindle pitch and flywheel diameter) - Spindle diameter: approx. 70 – 80 mm - Stroke: approx. 200 – 300 mm (depending on spindle length) - Throat depth: approx. 250 – 300 mm (distance from spindle center to frame) - Table size: approx. 500 x 400 mm - Maximum opening height: approx. 400 – 500 mm (with spindle fully extended) - Flywheel diameter: approx. 1,000 – 1,200 mm Machine features: - Design: Heavy-duty C-frame made of cast iron for high rigidity Pgsdpfx Ahowxyn Eevsi - Drive: Manual operation via large flywheel; energy is generated through the wheel’s inertia during operation - Table: Usually features a central through-hole and T-slots for tool mounting - Weight: Net weight typically ranges from 700 kg to 950 kg, ensuring stable setup (usually requires bolting to the foundation) Machine dimensions (main body): - Height: approx. 1,800 mm to 2,100 mm (depending on spindle position) - Width (frame): approx. 500 – 600 mm - Depth (base): approx. 800 – 1,000 mm Additional note: Dimensions depend on whether only the machine body or the total required space including flywheel overhang is considered.

Condition: used, Technical details: lifting capacity: 1,0 t Arm length: 3500 mm height lower edge cantilever arm: 3900 mm cantilever arm length from center column: 3750 mm Pgsdpfxou Nxnke Ahvji lifting height max. hook position: 4000 mm column diameter: 400 mm total power requirement: 0,76 kW dimensions L x W x H: aufgebaut: 4,2 x 0,84 x 4,25 m Column-mounted slewing crane with small foot flange octagonal 750 x 750 x 21mm - operation floor-operated pendant control - slewing electric/motor driven - jib LxWxH: 4100 x 125 x 300mm The crane is equipped with a new electric chain hoist STAR LIFTKET 1,0 to with electric trolley. Type 1000/2-4/1 Design 1000/2-4/1; lifting height 4.0m, lifting speed 4/1 m/min. Function: electric driving on carrier, up and down, as well as swiveling. without clamping plate! *

Condition: new, Year of construction: 2024, functionality: fully functional, FIVE STAR THM-460 Horizontal dual-head milling machine with indexing axis Psdpfx Ahjvi I Nmovjgi Ideal machine for milling and chamfering P-plates for toolmaking from 4 sides in one clamping. Basic technical equipment: Control system - FANUC 0i-MF - User-friendly touch screen, 10.4" color display - Dialog-supported data input Machining capacities - Workpiece length min./max.: 20 - 460 mm - Workpiece width min./max.: 20 - 460 mm - Workpiece height min./max.: 12 - 150 mm (opt. 180 mm) - Workpiece corner chamfer Cmax.: 10 mm Travel paths - X-axis (machine table): 620 mm - Y/Z-axis (infeed axis/headstock): 330 mm / 330 mm Drive power of the axes - X-axis motor: 2.5 kW - Y/Z-axis motor: 1.4 kW - B-axis motor: 1.4 kW Speeds - Rapid traverse X (machine table): 15 m/min - Rapid traverse Y (infeed axis): 10 m/min - Rapid traverse Z (headstock): 10 m/min - Manual feed: 0 - 1,500 mm/min - Automatic feed: 0 - 5,000 mm/min Main spindles - Two horizontally opposed milling spindles, designed for heavy-duty cutting - Drive type: Belt drive - Speed range: 100 to 1,000 min-1 each - Drive power: 11 kW each - Spindle interface: 2" / Ø50.8 mm each - Oil-cooled with separate spindle oil cooler (optional) Tools (standard) - Cutter head: Ø160 mm (opt. Ø200 mm) Note: Tools not included in the standard scope of delivery! Rotary axis (B-axis) - Indexing: (standard 5° pitch) - Indexing angle: 0°, 45°, 90°, 135° and 180° (for 2-sided machining) - Table size: Ø320 mm - Max. Max. load: 320 kg Workpiece alignment - 90° stop for easy positioning of the workpieces by the operator - Automatic measuring unit for detecting the workpiece position Guides - X-axis: Linear roller guide - Y-axis: Flat guide, TURCITE-B coated - Z-axis: Flat guide, TURCITE-B coated - 2 chip spirals (left and right) in the machine - Automatic spiral chip conveyor Miscellaneous - Central lubrication oil / air - Switch cabinet with heat exchanger - Machine sheet metal partial cladding - Support work table - Hand tool box - LED work light - 3-color warning light - CE declaration of conformity according to European directives Machine dimensions and weight - Machine size: 2,800 x 3,410 x 2,200 mm - Machine weight: approx. 7,500 kg Spindles - Power-Up spindle motor 15kW - Spindle interface 1-7/8" each, suitable for face cutter head Ø200 mm arbor diameter: Ø47.625 mm tools - Face cutter head Ø200 mm, MAROX-Tools Taiwan Type: SE545R/L0810, DC200 Rotary axis (B-axis) - Indexing axis, 5° increments, standard option Indexing angle: 0°, 45°, 90°, 135° Table size: Ø320 mm Max. Load capacity: 320 kg Compressed air, coolant and chip management - Chip compressed air nozzle, 1 piece each, external to the spindles, standard option (metal compressed air articulated tube) - Coolant system with separate cooling lubricant tank and low-pressure pump, as well as paper filter, tank capacity: 600 liters Filter capacity: 80 l/min. - Chip spirals (left and right) in the machine, standard option - Automatic hinged belt chip conveyor

Condition: excellent (used), Vema tilting spindle moulder Type: TFMSR-4 Spindle tilt: up to 45 degrees Spindle diameter: 40 mm Spindle length: 130 mm Spindle rotates left and right Pgedpfxeywwx So Ahvoi Univer power feed with 3 rollers Aigner Intergrall fence

Condition: used, MASTERWOOD MULTI-SPINDLE DRILLING MACHINE, 21 spindles, left/right spindles, Psdpfx Ahjywwwhovsgi quick-change clamping system, spindle pitch 32mm, vertical or horizontal drilling, 3 pneumatic clamps, power supply 380V, The machine is fully functional and ready for work.

Condition: used, total length: 1,200 mm, total width: 1,000 mm, total height: 1,700 mm, Empty weight: 500 kg Price: On request - Documentation available: No - CE certificate present: No - Main motor power [kW]: 4 - Spindle diameter [mm]: 30 - Table length [mm]: 940 - Table width [mm]: 800 - Max. tool diameter milling head [mm]: 200 - Feeding device present: Yes - Brand: Mec - Type: 4v - Number of wheels [pcs]: 3 - Number of speeds: 2 - Guide present: Yes - Tools (milling heads) included: Yes - Min. spindle speed [rpm]: 3000 - Max. spindle speed [rpm]: 8000 - Spindle speed control: Incremental - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 4.5 - Transport dimensions: 1200mm x 1000mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Pedpfx Aoyu Sd Nehvjgi Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1973, Centre height: 150 mm Centre distance: 760 mm Max. turning diameter over bed/cross slide: 300/165 mm Spindle bore: 32 mm Spindle mount, short taper per DIN 55027: Size 5 Quill taper of tailstock: MT 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 inch threads: 75 - 2.5 TPI Podpfxsyu R Nks Ahvjgi 19 module threads: 0.1 - 1.75 module 19 diametral pitch threads: 70 - 4 DP Electric drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Required space: 1800 x 770 x 1300 mm

Condition: good (used), Centre height: 125 mm Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Pjdpfxeyu R H Ne Ahvjgi Required space: Approx. weight: 500 kg

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 080005, • Turning diameter over slide: 1920 mm • Axis height: 1300 mm • Center distance: 2000 to 30000 mm • Maximum workpiece weight: 10–40 tons • Bed width: 2119 mm • Spindle speed: 1–500 rpm • Gear ratios: 4 • Spindle end: A2-15 • Spindle motor: 30/37 kW (optionally up to 60/75 kW) • Spindle bore: 230 mm (can be extended up to 610 mm) Podpfx Ahowab Rdjvjgi • Turret type: servo, 4 or 10 positions • Tool cross-section: 50/40 mm • X-axis travel: 1200 mm • Z-axis travel: 2000 to 30000 mm • X-axis ball screw: 63 mm x P10 • Ball screw in Z axis: 63 mm x P10 (over 5 m: 80 mm x P10) • Tailstock quill diameter: 235 mm (possible up to 360 mm) • Tailstock quill extension: 250 mm (possible up to 300 mm) • Tailstock quill taper: MT #7 • Rapid traverse: 7 m/min

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). Pgedsywtxbjpfx Ahvoi We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: used, Technical details: lifting capacity: 1,25 t lift: 4000 mm span width: 3000 mm pivoting angle: ca. 300 Grad total column height: 4020 mm stroke speeds: 8/2 m/min travel of hook: 4000 mm column diameter: 160 mm weight: 164 Kg dimensions L x W x H: liegend 4,2 x 3,5 x 0,2 m Column-mounted slewing crane with small foot flange octagonal 750 x 750 x 21mm - operation floor-operated pendant control - slewing electric/motor driven - jib LxWxH: 4100 x 125 x 300mm The crane is equipped with a new electric chain hoist STAR LIFTKET 1,0 to with electric trolley. Type 1000/2-4/1 Design 1000/2-4/1; lifting height 4.0m, lifting speed 4/1 m/min. Function: electric driving on carrier, up and down, as well as swiveling. without clamping plate! Pgodpfx Aheyuyiasvji *

Condition: used, Year of construction: 2010, 2010 machine, little used, requires inspection and maintenance. Pgsdpfxeywhmyo Ahvoi

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 1,800 mm, turning diameter: 2,000 mm, turning length: 8,000 mm, total length: 12,000 mm, overall weight: 29,500 kg, Machine can be inspected under power Pjdpfx Ahswv S D Hovsgi

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, 5-SPINDLE MOULDER WEINIG MOD. UNIMAT 500- USED - Composition: 1st lower horizontal spindle Pgodjywflyepfx Ahvji 2nd right vert. 3rd left vert. 4th upper horizontal spindle 5th lower horizontal spindle - Complete with MEMORY SYSTEM - Width 230 mm - PTO drive - Short workpiece device - Ribbed table - Year 2002 - CE standards

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: AA2/001942, SECOND-HAND 6 SPINDLES MOULDER SCM MOD. SUPERSET NTPL - CE RULES Pgjdpoywfkvofx Ahvsi - 1. Horizontal bottom 11 kw - 2. Vertical right 7.5 kw - 3. Vertical left 7.5 kw - 4. Horizontal top 11 kw - 5. Horizontal top 7.5 kw - 6. Horizontal bottom 7.5 kw - Label AA2/001942 - Year 2012

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 04/2027, overall weight: 500 kg, total width: 810 mm, total length: 1,250 mm, input frequency: 50 Hz, electrical fuse: 16 A, Dough Kneader DHM 220 with Swivel Arm Includes 1 bowl trolley Bowl and kneading arm made of stainless steel With flour dust cover Approx. dimensions: 810 x 1250 x 1350 mm (W x D x H) Connection: 400V, 16A CEE plug Used machine Pgodjyunk Sspfx Ahvei Options: Delivery service Maintenance contract Service package Training & commissioning We have many more dough kneaders in stock for you!

Condition: ready for operation (used), ROTOX copy milling machine, single-spindle Podpoyv D Epsfx Ahvogi

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 25 h, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, pivoting range: 45 °, actuation type: electric, table length: 1,300 mm, year of last overhaul: 2025, Equipment: CE marking, rotational speed infinitely variable, We are offering this as-new Format4 profil 45 Z x-motion tilting spindle moulder, year of manufacture 2025. Format4 Profil 45 Z X-Motion - 3 x 400 V, 50 Hz, 7.35 kW - CEE socket for additional devices 400 V Pgjdpfx Aoyv Awqohvji - Tenoning and slotting table 1300mm anodised - Extension table 1100mm - External spindle lock - Speed monitoring for slotting cutters - Quick clamping of fence - Crosscut fence 2600mm - Aigner integral fence - Spindle diameter 30mm Year of manufacture: 2025 Available from June. If you have any questions or need further information, please feel free to write us a message or give us a call.

Condition: good (used), Year of construction: 1978, WACO HM200 UNIVERSAL, Planer-Moulder 10 spindle machine Year 9/1979 S/N 31469.708 Pgjdpsiz Tzxjfx Ahvei Hydraulic feeded powerful spindle moulder. Feeding speed 0-50m/ min counter bearings on all horizontal spindles. 1. / 5. / 8./10. spindles equipped with jointer Infeeding table 200 cm Technical describtion: working capacity 200x100mm (width x hight) Spindle configuration: 1. Spindle Bottom 7,5Kw (10Hp) 2. Spindle Right 7,5kw (10HP) 3. Spindle Left kw (15HP) 4. Spindle Top, 7,5kW 5. Spindle Top, 7,5 kW 6. Spindle Right 7,5kw (10HP) 7. Spindle Left kw (15HP) 8. Spindle Top, 7,5 kW 9. Spindel Bottom, 7,5 kW 10.Spindle Bottom 10 kW Bottom spindle max tool diameter 160mm, work length 210mm Side spindles (right / left) max tool diameter 200mm, work length 110mm Top spindles max tool diameter 225mm, work length 210mm Spindle diameter 45mm Pneumatic pressure rolls ?? L x W x H = Weight 10 t

Condition: used, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Psdeyabc Ejpfx Ahvogi Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg

Condition: excellent (used), pressing force: 16 t, Spindle Press Manufacturer: Neher Model: SPP-16/70 Weight: 650 kg Pressing force: 16,000 kg Max. stroke: 250 mm Column gap: 500 mm Table size: 780x400 mm Clamping plate dimensions: 480x300 mm For pressing in components or testing tools. Pgjdpfeyknf Uox Ahvei

Condition: excellent (used), Year of construction: 1994, Tilting Spindle Moulder Manufacturer: Martin Model: T25 Year of manufacture: 1994 Pgedpfx Ahoyvrnrevji Tilting range: -5° to +45° Height and angle adjustment: Electric Spindle diameter: 2 spindles, 30 mm / 40 mm Power: 5/6 kW Speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 1,500 kg

Condition: excellent (used), CATALOG NUMBER: 6857 TECHNICAL DATA - Spindle diameter: 30mm - Spindle height: 140mm - Interchangeable spindle - Height adjustable (up/down) - Guide fence - 4 spindle speeds + right/left rotation: 3000, 4500, 6000, 9000 RPM - Table size with extension: 1970x990mm - Motor: 5.2kW - Extraction port diameter: 1x80mm, 1x120mm - Dimensions (L/W/H): 1920x1050x1130mm - Weight: 550kg ADVANTAGES – German manufacture – Used milling machine Pedoytf Rgspfx Ahvsgi – Very good condition Net price: 11,900 PLN Net price: 2,830 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of major exchange rate fluctuations the price may change)