Used Switch Plate for sale (17,170)

Year of construction: 2021, condition: used, Alfa Laval T10 Plate Heat Exchanger Industrial Alfa Laval gasketed plate heat exchanger, suitable for efficient heat transfer in industrial process applications. The unit consists of a plate pack mounted in a heavy-duty Alfa Laval frame with inlet and outlet connections. Product details: Manufacturer: Alfa Laval Type: T10 Bledpfx Aez Dix Esmron Equipment: Gasketed plate heat exchanger Quantity available: 2 units Heavy-duty steel frame Removable plate pack Multiple process connections Industrial configuration Condition: Used industrial surplus Both heat exchangers are available individually or together. The units are currently installed and can be inspected prior to purchase. Location: The Netherlands This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for additional information, dimensions, or to make an offer.

Condition: used, Large Industrial Plate Heat Exchanger – AISI 316 Stainless Steel Plates Heavy-duty industrial plate heat exchanger equipped with a large plate pack made of AISI 316 stainless steel. Product details: Equipment: Plate heat exchanger Plate material: AISI 316 stainless steel Large industrial plate pack Heavy-duty steel frame Flanged process connections Condition: Used industrial surplus Identification/marking: 316 Bedpfoz Di D Iox Amrjln The heat exchanger is dismantled and available from stock in Rotterdam, The Netherlands. Manufacturer, exact model, capacity and other technical specifications are currently unknown. Please refer to the pictures for the configuration and condition. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for additional information or to make an offer.

Condition: used, Cast iron bed Length: 2300 mm Bjdpfxjz H Ixcs Amrsln Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein Bjdpfxeu Icpps Amrsln down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m further features: -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode Bodpfx Aoz Hd R Ijmrsln * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: excellent (used), 3-Roll Plate Bending Machine / Round Bending Machine Manufacturer: Nosstec, Sweden Type: 8266 15/40 Bodpfez Agn Djx Amreln Year of manufacture: 1998 Serial number: 3058 Working width: 1,540 mm Plate thickness: up to approx. 4 mm Rollers: 3 pieces, steel rollers Drive: motorized Operation: electric control with foot switch and mechanical hand adjustment Weight: approx. 840 kg Documentation included Very good condition, fully functional.

Condition: good (used), Year of construction: 1983, sheet width 2520 mm plate thickness 2.0 mm ST plate thickness 3.0 mm ALU distance between columns 2600 mm cutting angle 2.0 ° no. of strokes ca. 32 Hub/min weight 1480 kg range L-W-H 2892 x 1865 x 1430 mm Machine from a sheet metal shop Good condition (!!) Features: - Robust, electric-motor-driven panel shear - Shatterproof, torsion-resistant welded steel construction - Compact and well-organized machine design - Electric-motor-driven backgauge Blsdpfxsz Ek A Us Amren * With analog position display * Manual fine adjustment from the front - 1x holding-down bar (continuous) - 1x freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: Blodpfx Amouagxpjron - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Bodpfxszzvytj Amreln Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), Cast iron bed - Floor Plate Bodpfxszzvz Rj Amreln Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions Bodpoxabvqsfx Amrjln * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Year of construction: 2019, sheet width 6080 mm plate thickness 6.0 mm rear stop 1000 mm cutting angle 0.5 - 2.0 ° down holder 29 Stk no. of strokes ca. 10 Hub/min total power requirement 22.0 kW dimensions of the machine ca. 7300 x 2150 x 2750 mm weight 25500 kg Current list price: approx. 150.000 euros Features: - Electro-hydraulic, slide-guided sheet metal shear - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Electrically driven backgauge with ball screws - Manual central lubrication - Cut line illumination - Ball bearings in the table - Fold-up finger guard, 1.000 mm - Side stop with T-slots, tilting stop, and scale - 5 support arms with T-slots - Photoelectric sensors on the rear of the machine - 1 freely movable foot switch Blsdpfxezvq Eto Amron Includes optional equipment: - Pneumatic sheet metal holding device

Condition: used, Year of construction: 2022, sheet width 3100 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 mm down holder 14 Stück no. of strokes 13 Hub/min cutting angle 2.0 ° throat 350 mm back stop - adjustable 1000 (+) mm oil volume 260 ltr. engine output 22.0 kW weight 10.575 kg range L-W-H 4100 x 2400 x 2170 mm Demonstration/demo machine (!!) from our exhibition (like NEW) with very few operating hours ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces Blodpfxexab I He Amron * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds Bledou Rimmopfx Amren - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: ready for operation (used), sheet width 2025 mm plate thickness 3.0 mm distance between columns 2050 mm no. of strokes 38 Hub/min cutting angle 1.38 ° Control konv. total power requirement 4.0 kW weight of the machine ca. 1100 kg Bedpfxszzrflj Amreln dimensions of the machine ca. 2299 x 2000 x 1130 mm Current new price: approx. 20.000 euros From a maintenance workshop Special price available upon request Features: - Robust / high-performance electromechanical sheet metal shear - Manual material backgauge * Infinitely variable adjustment range * Adjustment from the rear - via handwheel * Includes mm scale - 1x side stop - 3x front support arms - 1x freely movable foot switch - rear sheet metal chute - front sheet metal removal for smaller workpieces - digital piece counter - control cabinet - mounted on the front left

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates Blodsxab Tvepfx Amrjn - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values Bljdpfozcqy Sox Amren - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: good (used), Year of construction: 2005, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition (!!) Equipment: - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system "SP 9" * in like-new condition * backgauge pre-selection positioning * digital display of actual value * electro-hydraulic cutting angle adjustment with digital display * emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear - front finger guard - 1x side gauge ... 1,000 mm Blsdpfxezr Rqne Amrsn - rear sheet metal chute - 1x movable foot pedal - operating manual

Condition: good (used), Year of construction: 2015, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge Bjdpfx Ajzd Hb Homrjln * Continuously adjustable range * Adjustment from the back via handwheel * Includes mm scale * Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute - rear safety device (light barrier) - operating instructions (machine control system) - Transport stand (homemade)

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek down holder 14 Stück work height max. 840 mm Column width 3420 mm throat 350 mm Bodpfexab Ruex Amreln Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device Blodeycxgmopfx Amron - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table Bledpfx Amszkvx Usrsn - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg Bodpfxjxabd Uj Amrjln range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale Bjdjzycpxspfx Amreln - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Year of construction: 2022, condition: used, sheet width 1550 mm plate thickness 3 mm distance between columns 1600 mm back stop - adjustable 600 mm connected load 3 kW weight of the machine ca. 1,1 t dimensions 2,06 x 2,14 x 1,21 m Bledpfjfv H Dnjx Amron Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only)