Used Suction Extraction for sale (5,810)

Condition: new, Year of construction: 2025, Suction nozzle diameter: 120 mm or 100 mm Nominal flow rate: 1900 m³/h Chip bag volume: 1 x 0.1426 m³ Filter cleaning: manual Fedjwhuufopfx Aa Eepd Motor power: 1.1 kW Machine height: 1000 x 500 x 1800 mm (L x W x H) Weight: 39 kg

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. Fodpfxjyq Nl Nj Aa Ejpd - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system Fpodpfel Dw U Dox Aa Ejd "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Fpjdpfx Aajib Dads Eod Total weight about 2400 kg

Condition: used, Year of construction: 2002, Price: On request - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Capacity [m³/h]: 35800 - Filter length [mm]: 2000 - Main fan power [kW]: 37.0 - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fsdpsypv Sasfx Aa Ejpd Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1994, radial fan, dust extraction blower, fan, extraction, dust blower -Engine power: 37 kW Fpsdpfxeb I Dp Ts Aa Ejd -Speed: 2940 rpm -Inlet connection: Ø 420 mm -Output connection: 450 x 300 mm -Fan wheel: Ø 700 mm (drawing in the pictures) -Dimensions: 1700/1300/H1080 mm -Weight: 430 kg

Condition: good (used), Year of construction: 1998, filter area: 84 m², suction capacity: 2,000 m³/h, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. Fedpfxsttkgxo Aa Espd The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. Built-in 4 Kw fan Capacity of 2000 m3/h Filtration area 84 m2 Cartridge filter cartridges - 4 pieces. Inlet diameter 200 mm Length - 1.80 m width - 1.10 m height - 1.80 m

Condition: excellent (used), Mobile extraction unit HA26 - 1000 m3/h airflow - 220 volts Fsdpoypm Dtjfx Aa Ejpd - Year of manufacture: 1985 - Margin taxation (differential taxation)

Condition: good (used), Year of construction: 2012, Complete extraction system for DMG DMU 125 P for sale Fpodpfx Aoyplx Aoa Eed

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 33639, A very well-preserved welding fume extraction unit ESTA type: SRF p 10, serial no.: 33639, year of manufacture: 1998 Fpodoyr Rprspfx Aa Eed

Condition: good (used), Used, hardly utilized Nederman exhaust extraction system for trucks and cars. Shipping not possible. Please do not send email inquiries! If you have any questions, we are happy to assist you by phone. Viewing and pickup only by prior telephone appointment. Fpodpfeyr Nnasx Aa Eod Subject to changes, prior sale, and errors.

Condition: good (used), Year of construction: 2017, Dust suction hood 250 mm Fpedoxzuxnjpfx Aa Ejd Motor output 5,5 kW Dimensions (L/W/H) 2.650 x 1.030 x 2.500 mm

Condition: not inspected (used), Year of construction: 2020, machine/vehicle number: 0110-36643, functionality: unexamined, total height: 1,500 mm, total length: 750 mm, total width: 600 mm, overall weight: 30 kg, rotational speed (max.): 2,850 rpm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Speed: 2,850 rpm MACHINE DETAILS Operating voltage: 230 – 240 V Frequency: 50 Hz Fodpfx Aasyn H Nae Eepd Rated current: 2.4 A Connected load: 550 W Dimensions & Weight Dimensions (L x W x H): 750 x 600 x 1,500 mm Weight: 30 kg External reference: Pieper – Lot 12

Condition: new, CATALOGUE NUMBER HZ0001 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels allowing for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Fedpsx Ux E Uofx Aa Ejpd Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA - extraction capacity approx. 6500m3/h - engine power 5.5kW - rotational speed 3000 rpm - voltage 400V, 50Hz - extraction nozzle 280 mm - filter surface 16.3 m2 - extraction speed 28 m/sec - number of filters 35 - negative pressure 2800 Pa - filter category G - filter material polyester - dimensions length/width/height 921x1982x2271mm - weight 350kg Net price: PLN 16,000 Net price: EUR 3,810 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: not inspected (used), functionality: unexamined, overall weight: 5 kg, tool type: SK 40, No reserve price – guaranteed sale to the highest bidder! Fjdoyn Dycjpfx Aa Espd Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Tool holder: SK40 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 400 x 300 x 70 mm Weight: 5 kg EQUIPMENT 4 items in various designs (as-new condition) External reference: Large

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, machine/vehicle number: 0500230, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Tank diameter: 540 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Connection: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 1,500 mm Weight: 200 kg Fpjdpfx Aajyn Aabo Ejd External reference: Pieper - Lot 86

Year of construction: 2012, condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, machine/vehicle number: 3820120600272, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates collection on time either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Tank diameter: 540 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 5.6 A Connected load: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 1,500 mm Fpodpfxsynz T He Aa Eod Weight: 200 kg External reference: Pieper - Lot 87

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Extraction arm with a range of 3 m Capacity 1600 m3/h Vacuum pressure 2800 Pa Fodpfstpui Ijx Aa Eopd Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, volume flow: 2,600 m³/h, suction capacity: 2,600 m³/h, noise level: 79 dB, total height: 2,200 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 200 kg, warranty duration: 12 months, Extraction system for double mitre saws or saws used in the aluminium sector, e.g. Emmegi / Elumatec / Mecal / FOM / Rapid / Pertici etc. If you are looking for a powerful and quiet extraction system, you have come to the right place. Alternatively, a pre-control unit including a switch is available for your double mitre saw, which operates via a potential-free contact. Fpsdpjwii Hxofx Aa Ejd The extraction system is perfectly suited for aluminium, PVC, and steel. Very powerful and extremely quiet extraction unit operating below 80 dB! 2600 m³ per hour extraction capacity 3 kW motor The extraction system includes a 14-metre hose with 2 outlets.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, overall weight: 990 kg, input voltage: 400 V, total width: 1,675 mm, total length: 1,619 mm, total height: 2,885 mm, volume flow: 5,000 m³/h, As new Ivat Air FTower-5.000. Fsdpfxjyrytge Aa Eepd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 670x770x1203 mm Weight 142 kg Fpjdpfx Aajvz Hi As Eed Total power requirement 1,2 kw

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Fpsdpfx Aajydql De Eod

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input current: 21 A, type of input current: DC, volume flow: 6,045 m³/h, overall weight: 1,100 kg, ALKO ECO JET 60/5 HD EXTRACTION UNIT Sawdust extraction, dust extraction, self-cleaning negative pressure filter, ALKO ECO JET Fedpfx Aasyrqnze Eepd The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Ideally suited for all types of dry dust in various technological processes. The filter bags can be exchanged according to requirements and intended use.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Exhaust System Manufacturer: Hocker Polytechnik Model: MultiStar JP5 Year: 2012 Volume: 20,000 m³ Motor: 30 kW Includes briquetting press BrikStar c-3 18 Vacuum operation Filter surface area: 121.3 m² Filter bags: 100 pieces Bag length: 2,300 mm Bag diameter: 170 mm (externally pressurized) Compressed air connection: 6.0 bar, 1" Operating pressure: 4.5 bar Compressed air consumption: approx. 216 Nl per bag row, at a pulse duration of 200 ms Fpjdpjyrpxlsfx Aa Eod Noise level - Jet operation: approx. 75 dB(A), depending on local conditions Base area, L x W: 2,540 x 2,420 mm Required space, L x W: 3,500 x 3,380 mm Connection, bottom: 2,300 x 2,300 mm (inside) Total height: 4,430 mm Weight, approx.: 1,960 kg Channel, 90° bend, 2 mm ⌀ 900 x 800 mm - 1 unit Bolted version, galvanized sheet steel, 2 mm Duct size 1: 900 x 800 mm Duct size 2: 900 x 650 mm Shape: asymmetrical 460406 Duct 2 mm, 750 mm long, 900 x 800 mm - 2 units Bolted version, galvanized sheet steel, 2 mm 1 blank cover 2 mm, 900 x 800 mm 1 piece T-piece for MS xP to BrikStar 1 piece 300 x 2,300 mm to existing briquetting press Manufacturer: Gross (approx. 1,100 x 1,100 mm / press height: 1,260 mm)

Condition: new, Year of construction: 2024, functionality: fully functional, Extraction table without rear panel/side panels Technical data: Work surface: 2,000 x 1,000 mm Working height: 850-950 mm (manual adjustment) Width: 2250 mm (including energy bar) Power strip with tool tray: Fsdsuzf Ihopfx Aa Eepd 2x 230 V socket with hinged cover, 2x compressed air couplings, mains cable and main switch Extraction nozzle Ø 160 mm, with shelf