Used Suction Belt for sale (10,765)

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 56 mm -Transport width: 335 mm -Shaft: recording M8 -Quantity: 17x transport rollers available -Price per piece -Total dimensions: Ø 56 x 345 mm Duodpfxjphupme Aiwot -Weight: 2.6kg/piece

Condition: good (used), V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley SPA 180-4 -V-belt width: 13 mm -Receiver: Taper bushing 2517-55 (Ø 55 can be changed) Duodpfx Aiopid Dkswot Quantity: 1 piece available -Dimensions: Ø 185 x 65 mm -Weight: 7.6 kg

Condition: used, Manufacturer: Kuderer Maschinenbau GmbH Duedpfx Aey N Nw Reiwot Model: AZ-2 Year: 1992 Belt Grinder Overall dimensions: 1000 x 440 x 1080 mm Belt size: 150 x 1440 mm Power: 1.5 kW Extractor Overall dimensions: 560 x 560 x 690 mm

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 867721275, The HOBART PREMAX FTPi 2-S-AN-R-DS6 (Premium specification) is a high-performance industrial flight-type dishwasher designed for maximum capacity and efficiency in large-scale catering operations (e.g., commercial kitchens, canteens, catering services). Djdoy N N Icspfx Aiwjut Hobart dishwashers make use of various energy-efficient technologies, primarily employing heat pump technology (HP) for drying and energy savings. Heat Pump for Drying: Certain Hobart models feature heat pump technology that heats the drying zone and enhances energy efficiency. Waste Water Heat Recovery: Waste water heat recovery utilizes the energy from hot wastewater (60 °C) to preheat the incoming freshwater to up to 40 °C before it enters the boiler. Drying & Energy: By using heat pumps (HP), energy from the surrounding environment is used to heat the drying air, which significantly reduces energy consumption. Advantages: These technologies result in lower operating costs and improved energy efficiency. Thanks to its extensive equipment, this machine has a power rating of just 27.8 kW—a remarkable figure for a unit of this class. This guarantees continuous, long-term savings in operating costs. The unit was dismantled by Hobart factory service. The system comes from a renowned industrial operation in the elevator construction sector, and became available due to the reconstruction of the entire industrial complex. Projected availability: kW 23 Commissioning will also be carried out by factory service (subject to cost participation), which ensures warranty coverage. You will receive a fully refurbished, fully functional flight-type dishwasher, with commissioning and introduction service provided directly by Hobart factory service. Highlights of the PREMAX FTPi Series SENSOTRONIC Wash Intelligence: The machine automatically adjusts consumption (water, chemicals, energy) based on soil level and dishware volume. LOW-CHEM Detergent Saving System: Lowers detergent consumption by up to 80% by using a dedicated pre-wash zone and water regeneration. CLIMATE-PLUS Energy Saving System: The integrated heat recovery system lowers energy costs. Automated Processes: Includes a tray and cutlery lifting magnet for efficient washing. Model Designation Breakdown: FTPi: PREMAX flight-type dishwasher (Intelligent) 2: Number of wash zones (two) S: SENSOTRONIC (wash intelligence) A: Automatic Operation N: Standard entry zone R: Work direction right-to-left DS6: Below are the key technical specifications and features of this particular model, based on manufacturer information: Technical data: • Capacity: Designed for high plate throughput (over 5,000 plates/h in S configuration) • Water consumption: Approx. 130 – 160 l/h (depending on setting/load) • Orientation: R (right-to-left operation: entry right, exit left) • Machine type: Flight-type dishwasher • Model: Premax FTPi 2-S-AN-R-DS6, FHP • Heating: Electric • Voltage: 400 V • Mains: 3-PE • Protection: 3 x 50 A • Power: 27.8 kW • Serial No.: 867721275 • Year of manufacture: 2019 • Wash zones: S Prewash/Wash/Rinse/S Drying • Overall length: 685 cm • Discharge: 100 cm • Conveyor width: 44 cm • Conveyor height: 61.2 cm • Height: 190 cm • Height with door open: 215 cm • Width: 68 cm • Exhaust: Climate TE-PRO Subject to changes and errors.

Condition: excellent (used), CATALOG NUMBER 6582 TECHNICAL DATA - Maximum workpiece width: 920mm - Maximum workpiece height: 150mm 2 units: 1) Grooved rubber calibration roller 11kW 2) Grooved rubber calibration roller + belt air blowing 7.5kW From above: - 2 rubber feeder rollers - Unit - 2 rubber feeder rollers - Unit - 2 rubber feeder rollers From below: Dsdpfx Ajy N A E Usiweut - 3 rubber feeder rollers - Conveyor belt - Pneumatic belt oscillation - Electric table elevation - Stepless feed speed adjustment - Working pressure: 8-10 bar - Pneumatic brake - Extraction nozzle diameter: 2 x 160mm - Overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - Weight: approx. 1305kg – Made in Germany – 2 units – Used sander, very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller Dusdpfey N A A Hsx Aiwst – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: new, galvanized sheet metal dust collection trays fold down side and rear walls - optional rear wall with suction function Duodpoh Ucqtofx Aiwet Working area 2500 x 800 mm Working height 930 mm incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow 5400 m3/h Number of filter cartridges # 4 DM filter cartridges 320 mm Length filter cartridge 600 mm Total filter area 34.8 m2 Noise level 78 dBA Compressed air 5-7 bar Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! Dujdpfx Aiexqggcjwst • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min Dusdpfx Aisudxchewst 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar Dujdpfxjtwzyfo Aiwet 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! Dusdpfx Aioitvkuowet IMMEDIATELY AVAILABLE

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Dueded E Ixzjpfx Aiwot Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Sanding belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Duedpfshtuvrjx Aiwjt Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" skew-grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (on/off) for automatic engagement/disengagement of the sanding roller sanding pad unit - Activation of segments via electronic control, which synchronizes their operation with feed speed and manages the number of active segments based on the workpiece geometry, allowing selection of more or fewer segments to the left or right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4” display with ‘eye S’ software integration NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top CE Incl. special grinding shoe Duedjv D H Sispfx Aiwjt Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Belt sander LANGZAUNER Type LZG Sanding table dimensions approx.: 2500 x 800 mm Sanding belt dimensions approx.: 6800 x 150 mm Motor power approx. 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of the sanding belt Sanding belt cover on top Light bar for the work area CE Incl. special sanding pad Incl. extraction fan NEW GRAPHITE CLOTH Note used machines: Djdpfeuxnyuex Aiwout - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Catalogue number 7975 TECHNICAL DATA - Infeed width: 450 mm - Infeed height: 250 mm - Shaft width: 530 mm - Knife length: 530 mm - Number of knives: 2 pcs - Sieve dimensions: 50x50 mm - 2 toothed feed rollers from below - Lower feed roller motor approx. 2.2 kW - Toothed feed roller from above - Upper feed roller motor approx. 2.2 kW - Conveyor belt - Conveyor belt length: 6500 mm - Conveyor belt width: 400 mm - Main motor 37 kW - Conveyor motor 0.37 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 2400x1300x1100 mm - Conveyor overall dimensions (L/W/H): 6600x610x550 mm - Weight approx. 2500 kg Dodpjy Nym Aefx Aiwsut – German manufacture – Autoreverse (adjustable) – protects the machine from blockage and damage in case of overload – With 6500 mm conveyor – Used shredder, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on 4.2 EUR rate (Prices may change with significant currency fluctuations)

Condition: used, OTT MEGAtronic 11 Lacquer Wide-Belt Calibration and Fine Sanding Machine 1st sanding unit: calibration roller, diameter 150 mm, 90° Shore 2nd sanding unit: electronically controlled, segmented membrane sanding pad Working width: 1100 mm MEGA – Lacquer sanding package Feed speed steplessly adjustable: 3–15 m/min Motor power, 1st sanding unit: 11 kW Motor power, 2nd sanding unit: 11 kW, with 2nd belt speed of 4.5 m/sec Additional special equipment: Vacuum table Vacuum generator 3 kW Abrasive belt oscillation Rigid sanding shoe for solid wood and frame sanding Machine is WORKSHOP-OVERHAULED, in TOP CONDITION, from a crafts business Djdpfxey Nl Sko Aiwsut Available from stock in Lieboch

Condition: ready for operation (used), Year of construction: 2017, conveyor belt length: 3,100 mm, conveyor belt width: 445 mm, Belt dimensions: 3100 × 445 mm Belt speed: 3.6 m/min Dsdpfoy Nk Nzjx Aiwsut

Condition: used, Year of construction: 2020, conveyor belt length: 3,100 mm, conveyor belt width: 445 mm, Belt dimensions: 3100 × 445 mm Duodpey Nk Iwjfx Aiwjt Belt speed: 3.6 m/min

Condition: ready for operation (used), Year of construction: 2018, conveyor belt length: 3,100 mm, conveyor belt width: 445 mm, Belt dimensions: 3100 × 445 mm Dsdpfx Ajy Nk D Esiweut Belt speed: 3.6 m/min

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, conveyor belt length: 2,500 mm, conveyor belt width: 415 mm, Belt dimensions: 2500 × 415 mm Belt speed: 3.6 m/min Dujdpfx Aoy Nk Aujiwet

Condition: good (used), Year of construction: 2019, conveyor belt length: 3,100 mm, conveyor belt width: 445 mm, Belt dimensions: 3100 × 445 mm Belt speed: 3.6 m/min Duedjy Nkxvepfx Aiwst

Condition: used, Year of construction: 1994, Max. pass-through height: 160 mm Abrasive belt length 1st unit: 1900 mm Max. working width: 1350 mm Dujdpfx Aoy Naq Usiwet Number of belts: 2 1st unit: - Calibration roller, steel design - Steel, grooved Abrasive belt width 1st unit: 1350 mm 2nd unit: Combined sanding unit Design of 2nd unit: Roller/shoe Control: Manual control panel Elec./pneu. belt oscillation: pneumatic Infeed height: fixed (upper part moves) Table lift: electro-motorized Table display: mechanical numeric display Working or infeed table height: 900 mm Location: Nattheim

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Equipment and technical specifications: - Usable WORKING WIDTH mm: 950 - SANDING BELT LENGTH mm: 670/970 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATING ROLLER mm: 150 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER HP: 10 - BELT SPEED m/s: 18 - FEED MOTOR POWER HP: 0.75 - Variable speed feed conveyor with infinitely adjustable speed, m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Swiveling ROLLER for belt tensioning - 2 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER TABLES each with 2 rollers at infeed and outfeed Dedpfsy I Eqwex Aiwout - 1 EXTRACTION CONNECTION with 160 mm diameter - AUTOMATIC TABLE POSITIONING BASIC MACHINE ACCORDING TO CE STANDARD PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system The machine model with this system has been running non-stop since 2008 without lateral belt drift! Including special equipment: 11 kW motor Pneumatic sanding pad incl. feed-synchronized control Location: Flörsheim Availability: short notice

Condition: used, Year of construction: 2004, functionality: fully functional, Wide belt sander CB ST 970 R+R – after comprehensive overhaul Dodpoy Rh E Aofx Aiwsut Specification: • Condition – used, after comprehensive overhaul, calibration, and replacement of conveyor belt with a new one • Manufacturer – CB • Model – ST 970 R+R • Working width – 970 mm • 2 sanding units: - 1 calibration roller with hard rubber – diameter 150 mm - 2 finish sanding roller with soft rubber – diameter 150 mm • Main motor power: 9.2 kW • 2 feed speeds for the conveyor • Electronic thickness gauge for the workpiece • Photocell-controlled oscillation • New conveyor • Emergency stop • Complete set of documentation from the manufacturer (in Italian) • Weight: 1,170 kg • Year of manufacture: 2004 • Overall dimensions: 130 x 160 x 195 cm (L x W x H) Additional information: • Machine is in very good technical condition, ready for immediate use • The pictures shown reflect the actual condition of the item for sale • Facility to connect and test the machine on site • Free machine operation training (at company headquarters) • The price in the listing does not include VAT or transport costs Financing and transport: • We organize transport via MDD fleet, courier companies, or third-party carriers • Financial support available through leasing or lease loans