Used Stud Welding for sale (5,827)

Condition: good (used), Year of construction: 2005, Offer 26140 Technical data: - Maximum load capacity with horizontal table: 350 kg - Maximum load capacity in all tilted positions: 300 kg - Diameter of the rotary table: 400 mm - Through-hole / hollow shaft: 125 mm - Rotary table can be manually swiveled left and right: 0 - 90° Kjdpfx Ahezfhvze Ejlu - Rotational speed, continuously adjustable: approx. 0.15 - 5.0 rpm - Right-hand and left-hand rotation - Electric foot switch - Welding current transmission: approx. 350 A - Power supply: 400 V - Table height in horizontal position: approx. 900 mm - Space required: approx. W 1150 x H 900 x D 800 mm - Weight: approx. 290 kg - Chuck size: 300 mm

Condition: used, 1 used welding machine Manufacturer: Fronius Model: Synergic 3400 G/W/E Suitable for welding steel, stainless steel, and aluminium using the MIG/MAG process. Technical specifications: Max. welding current: 340 A Wire diameter: 0.8/1.0/1.2 mm possible Connection voltage: 380 volts Duty cycle (ED) 35% at 340 A Digital display Ksdeyl Id Topfx Ah Eolu Dimensions (L x W x H): 890 x 460 x 945 mm Total weight: 139 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Kawasaki RA006L Robot with E-Controller Year of manufacture: 2022 Ksdpfx Aheympvto Eelu Control unit: FE1 E-Controller Max. payload: 6 kg Max. working range: approx. 1650 mm Standard configuration consists of: • Robot kinematics • Controller (10 m cable to robot kinematics) • Teach pendant (10 m cable to controller) Interfaces: • RS232 • 2x Ethernet (individually configurable) • 2x USB • 32 digital inputs / 32 digital outputs (freely assignable) • User interface on robot upper arm R-Series 12E / 8A / 2x air (10 mm) (The signals from the user interface are available in addition to the 32 inputs and 32 outputs.)

Condition: good (used), 1 MIG/MAG welding machine Manufacturer: Merkle Model: MobiMIG 320 K Technical specifications: Input voltage: 3 x 400 V Adjustment range: 25 - 320 amps Duty cycle: 40% at 300 amps, 60% at 270 amps, 100% at 240 amps Current adjustment: stepless Cooling: Inverter cooled by integrated fan; Torch: gas-cooled Design: portable assembly unit Wire feed mechanism: 4-roll drive DV 26 Fuse protection: 16 amps Kledpfxsxpf N To Ah Eju Dimensions: 600 x 300 x 565 mm

Condition: good (used), Year of construction: 2015, 1 used shielding gas welding machine Daihen /OTC M 380-S Year of manufacture 2015 Current range 30-380A Welding power at 100% duty cycle 270A Welding wire 0.8-1.6 mm Wire feed 0.1-22 m/min With 4-roller wire feeder with encoder control Klsdpfx Ahoxnqnxe Esu

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 with separate wire feed case Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Kljdpfxsy Ia Hmo Ah Eeu Weldable wires, steel [Ø in mm]: 0.6 - 1.6 Weldable wires, stainless steel [Ø in mm]: 0.8 - 1.2 Weldable wires, aluminium [Ø in mm]: 1 - 1.6 Weldable wires, CuSi [Ø in mm]: 0.8 - 1.2 Voltage adjustment: Continuous MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø in mm]: 1.5 - 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Process-independent data Open circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Mains: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Line protection 3~ (50/60 Hz) [A]: 32 Positive mains tolerance 3~ (50/60 Hz) [%]: 15 Negative mains tolerance 3~ (50/60 Hz) [%]: 15 Mains plug: CEE 32 Standards and approvals Protection class: IP32S Insulating material class: F Standard: EN 60974-01 Marking/Certification: CE, S Cooling type: Gas-cooled, water-cooled Cooling Nominal cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Dimensions wire feeder case (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: used, Year of construction: 2011, 1 used welding machine Manufacturer: Merkle Type: MobiARC 280 cel Year of manufacture: 2011 Technical data: Welding inverter Merkle MobiARC 280 cel+ - with accessories Primary winding: Mains voltage: 400 V, Mains frequency: 50/60 Hz, Power consumption: 8.3/5.5 | 9.7/8.3 kW, Current consumption: 12/8 | 14/12 A, Klsdpsh Nvfnofx Ah Eou Maximum current: 21/16 A, cos φ: 0.98, SMAW welding: Electrode diameter: 1.5-6.0 mm Open circuit voltage: 96 / 90 V Welding voltage: 20.6-31.20 V Welding current: 15-280 A, current at 60 %: 250 / 260 A GTAW welding: Open circuit voltage: 96 / 90 V, welding voltage: 10-21.2 V, Welding current: 5-280 A, current at 60 %: 250 / 270 A, Insulation class: H, Protection class: IP23, Operating modes: SMAW, GTAW (DC), Cooling: AF, Overall dimensions: 485x200x435 mm Weight: 17.5 kg

Condition: good (used), *DESCRIPTION* Professional ARO AROMASTER II welding set, year 1997. Medium-frequency spot welding unit, 1000Hz, delivered complete with its 2 original tools. ARO Château-du-Loir brand = a global reference in resistance welding. Robust equipment, spare parts always available. *LOT COMPOSITION* 1. *AROMASTER II Generator* Code ZU182000 - No. 9713221A523 - Year 1997 400V Three-phase 50Hz - 20.7 kVA at 100% / 29.3 kVA max Integrated water cooling - NF A 82-020 standard 2. *ARO YB200450 X-Gun* Klodpezczw Iefx Ah Eju No. 9712211B669 - Year 1997 Water-cooled - 450mm copper arms - Force ∼300 daN 3. *ARO YB200550 Dent Puller Gun* No. 9712211B640 - Year 1997 For welding pull studs Ø2.5mm *TECHNICAL SPECIFICATIONS* Brand: ARO - Made in France Technology: Medium frequency 1000 Hz Power supply: 400V Three-phase 32A minimum Welding current: ~10,000 A Weldable thicknesses: Steel 0.6 to 2.0 + 2.0 mm Control: Digital - Time/intensity adjustment Cooling: Water - Integrated unit Generator weight: Approximately 110 kg - On castors *CONDITION & WARRANTY* Set in good overall working condition. Tested in the Gortina workshop: cycles with gun and puller OK, pneumatic pressure OK, no water leaks, thyristors OK. Original ARO yellow paint. Cables and wiring in good condition. *ADVANTAGES* 1. *2-in-1 Set*: Spot welding + inertia dent pulling. One generator only. 2. *ARO Reliability*: Industrial construction. National after-sales service. 3. *Economy*: Equivalent new cost 2026 > €15,000 (excluding VAT). 4. *Ready for use*: Generator + gun + puller, original 1997. *APPLICATIONS* Traditional automotive bodywork, vehicles before 2010, vans, 4x4s, restoration of old vehicles. Dent pulling without paint. Training centers.

Condition: good (used), Year of construction: 2000, *TECHNICAL SPECIFICATIONS* Make / Model ARO MC30CSC Year 2000 Serial No. 0001122B122 Type Fixed spot welding machine with swan neck Power Supply 400V Three-phase 50Hz - 50A Power 21 kVA at 100% / 78 kVA max Max. Welding Current 19,000 A Clamping Force 358 daN 358 kg Swan Neck Depth 550 mm Arm Spacing 174 to 489 mm Cooling Water 5 L/min - 6 bar Control ARO Micro 2X16 III digital Multi-parameter programs Weight 270 kg Standards CE - NF A 82-020 - Made in France *SUPPLIED EQUIPMENT* - Complete machine on chassis - 1 pair of mounted, water-cooled copper arms - Micro 2X16 III digital control with key - ARO operating manual *CONDITION* Machine in excellent working condition. Tested and inspected in the workshop: welding cycles OK, pressure build-up OK, no water leaks, thyristors OK. Original yellow ARO paint. Ready for production. Kedpfxszczwhe Ah Eolu *ADVANTAGES* 1. *Power*: 78 kVA for welding steel up to 3+3 mm and stainless steel 2+2 mm. 2. *ARO Reliability*: Leading brand, spare parts always available. 3. *Modern Control*: Micro 2X16 for precise adjustment of time/intensity/force. 4. *Versatile*: 550mm swan neck for large parts. *APPLICATIONS* Manufacturing of grids, baskets, metal frames, assembly of industrial sheet metal, locksmithing, industrial bodywork.

Year of construction: 2020, condition: ready for operation (used), A handheld fiber laser welding machine Sitolaser with a Reycus laser source is available. Laser power: 1000W, cooling: water, welding capacity steel/copper/aluminum: 4mm/2mm/2mm, min. sheet thickness: 0.2mm, wavelength: 1080nm. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1200mm, weight: approx. 250kg. Including various copper nozzles, spare lenses and heavy-duty casters for mobility. The item is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Klsdezfaaropfx Ah Esu

Condition: used, Year of construction: 2006, Welding power 25 kVA Pressing force 120 daN Ksdpowfqucofx Ah Eolu Arm reach 160 mm Cylinder stroke 45 mm

Condition: used, Year of construction: 2002, Welding power 25 kVA Pressing force 120 daN Arm reach 160 mm Ksdpfewfqtfox Ah Eslu Cylinder stroke 45 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Welding cell with TIG welding robot Equipment: Rotary welding table – with two interchangeable frames KUKA KR6 R1820 industrial robot arm Year of manufacture: 2018 Serial number: 425602 Weight: 168 kg Max. payload: 6 kg Reach: 1820 mm KUKA KR C4 Smallsize-2 control system Year of manufacture: 2018 Serial number: 380929 Weight: 123 kg Klodpfx Aoxm Tuleh Esu Dinse DIX TIG 350 AC/DC WIG welding machine Serial number: 19840519 TEKA Caremaster BIA welding fume extraction systems (2 units) Volume flow: 2200 m³/h Connection parameters: 400 V / 50 Hz / 2.5 A Power: 1.1 kW Weight: 125 kg/unit Year of manufacture: 2008 6-part steel cabinet Equipped with additional accessories

Condition: used, functionality: fully functional, The Selco NEOMIG 242 is a classic, extremely robust MIG/MAG welding machine from the Italian premium manufacturer Selco (which was acquired by voestalpine Böhler Welding several years ago). Unlike modern, fully digital inverter machines, this is a stepped, electromechanical transformer system. This means that it is considerably heavier and larger than a modern compact inverter, but it is considered practically indestructible in metalworking shops and workshops, with an enormous service life and a very stable arc. Technical data at a glance Feature Value / Specification Welding process MIG/MAG (gas-shielded welding) Kjdpfszd S Ryox Ah Ejlu Connection voltage 400 V (3-phase / three-phase) Welding current range 30 – 240 A Duty cycle 30% at 240 A60% at 170 A100% at 131 A Voltage levels Multi-stage, manually adjustable Wire feed Integrated, mechanical roller feed Max. power consumption approx. 8.3 kW Cooling Typically gas-cooled (standard hose package) Important features & practical advantages Classic transformer technology: Since no sensitive electronics are installed in the power unit, the NEOMIG 242 tolerates dust, metal grinding dirt and moisture much better than modern inverters. It also operates absolutely reliably under harsh conditions in the workshop or on-site. Excellent welding properties: Selco was known in the industry for its perfectly matched copper transformers and chokes. The system provides a very spatter-free, smooth and even arc in steel, stainless steel and also in thinner aluminum applications. Intuitive operation without unnecessary features: No complicated digital menus. You select the appropriate welding level, adjust the wire speed on the potentiometer and can start immediately. Using toggle switches, modes such as 2-cycle / 4-cycle (for long seams) as well as spot and interval welding can also be activated. Used market assessment: Since this series is no longer produced new, it is a real insider tip on the used market for workshops and ambitious DIY enthusiasts. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total height: 1,400 mm, total width: 620 mm, total length: 1,100 mm, ground cable length: 4,000 mm, overall weight: 44 kg, type of cooling: water, hose package length: 10,000 mm, welding power (max.): 23 kVA, welding current at 60% duty cycle: 420 A, welding current at 100% duty cycle: 360 A, welding current (min.): 10 A, welding current (max.): 500 A, Equipment: documentation/manual, type plate available, Complete set – Fronius TransSteel 5000 MIG/MAG welding system including wire feeder, including new welding torch, and NEW accessories! For sale is a powerful and fully equipped MIG/MAG welding system from the premium manufacturer Fronius. Klsdpfx Aevphv Tjh Esu Technical data: Brand: Fronius Model: TransSteel 5000 MAG Year of manufacture: 2017 Condition: Used, fully functional Welding current: 10 – 500 A Duty cycle (10 min/40°C): 500 A (40%) / 360 A (100%) Mains voltage: 380V / 400V / 460V (3 phases, +/- 10%) Protection class: IP 23 Transport dimensions (overall): approx. L 1100 mm x W 620 mm x H 1400 mm Location: Graz Equipment & scope of delivery (ready-to-weld complete package): Wire feeder: VR 5000 Yard 4R/W/FSC Synergic (including gas test/wire inlet & mounting arm) Cooling: Water cooling unit FK 5000 (including water flow protection, thermosensor & water filter kit) Intermediate hose package: 10 m / 70 mm² (for maximum reach) Chassis: 4-wheel chassis "Pick up 5000 TST" for high mobility Connections: 5 m primary cable including 32A CEE plug New accessories: NEW: New Fronius MTW 500i /FSC/UD torch (4.5m, 45°, LED lighting) NEW: BK Universal Ø1.2/G/W/5m initial equipment NEW: New 5-liter coolant FCL10 NEW: Ground cable 70mm² 4m EC/BY Interested? Contact us to arrange a viewing or to receive a quote.

Condition: excellent (used), Complete PVC Line – Automatic Double Head Welding Machine URBAN AKS 3900 + Automatic PVC Corner Cleaning Machine URBAN SV 305 – Year 2006 Professional URBAN production line composed of Automatic Double Head Welding Machine AKS 3900 and Automatic Corner Cleaning Machine SV 305, ideal for the production of PVC windows and doors. --> Automatic Double Head Welding Machine – URBAN AKS 3900 Year: 2006 Automatic 2-head welding machine – URBAN AKS 3900 Professional automatic welding machine designed for high-precision welding of PVC profiles with angle processing from 30° to 180°. The machine guarantees precise welds with weld bead limitation and excellent operational reliability. Thanks to the automatic head positioning system and fully adjustable working parameters, it allows fast and efficient production cycles. Main features No. 2 automatic welding heads Angular welding from 30° to 180° Automatic head positioning system Electronic temperature adjustment Welding time and pressure control Two-hand safety control system Adjustable profile supports Independent thermostatic controllers Controlled heating elements CE-compliant safety devices User manual available Working capacity Profile height: 30 – 130 mm Maximum profile width: 140 mm Useful welding length: 440 – 2500 mm Production capacity: approx. 200 welds / 8 hours Technical data Installed power: 3 kW Power supply: 230/400 V – 50/60 Hz Kledpfsy R Tvyex Ah Eou Operating pressure: 8 bar Air consumption: approx. 36 l/cycle Weight: approx. 550 kg Noise level: 67 dB(A) --> Automatic PVC Corner Cleaning Machine – URBAN SV 305 Year: 2006 Automatic PVC Corner Cleaning Machine – URBAN SV 305 Automatic machine designed for cleaning and finishing welding seams on PVC windows, doors and profiles. The URBAN SV 305 allows complete processing of welded profiles, including cleaning of surfaces, external corners, internal grooves and gasket slots, also on acrylic-coated profiles. Thanks to the automatic profile recognition system and intuitive SPS control, the machine ensures high precision and easy operation. Main operations Cleaning of upper and lower welding seams External corner milling with carbide cutters Cleaning of upper and lower internal grooves Processing of internal and external gaskets Drilling of gasket grooves Inclined chamfers Equipment Tool turret for 3 cutter units Cleaning knives Adjustable milling unit Upper and lower drilling unit Adjustable pneumatic system SPS operator control panel Soft-start system and electronic motor brake User manual available Working capacity Profile height: 30 – 150 mm Profile width: 40 – 145 mm Minimum window dimension: approx. 210 mm Technical data Spindle/milling speed: 2800 rpm Installed power: 1.7 / 2 kW Power supply: 230/400 V – 50/60 Hz Operating pressure: 7 – 8 bar Machine weight: approx. 530 – 550 kg Noise level: 78 dB(A) Fully working line, ideal for PVC window and door manufacturers looking for a complete, reliable and ready-to-use production solution.

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: 8100404, Our showroom demonstration model is for sale. It comes without electrode holder and ground clamp. New cables are available upon request for an additional charge. Welding Power Easy-Stick 410 SET Adjustment range: 30 – 400 A Duty cycle at maximum current at 40°C: 60% Duty cycle at 100% duty cycle at 40°C: 310 A Fuse protection: 32 A Line voltage: 3 x 400 V Line voltage tolerance: -10 – +15% Line frequency: 50/60 Hz Open circuit voltage: 66 V Power consumption: 13 kVA Standard: EN 60974-10 Protection class: IP 21 Insulation class: H Marking: CE, S Operating temperature: -10 – +40 °C Weight: 24 kg Length x width x height: 618 x 330 x 441 mm Kedsv T Tx Ispfx Ah Eolu

Condition: good (used), Wire electrode, welding wire, welding wire, flux-cored wire Ksdpfxjzcv Rps Ah Eelu -Welding wire: flux-cored wire, drum with unwinding device -Wire: Aluminum Ø 2.4 mm -Roller: Ø630 x 460 mm -Transport dimensions: 680/640/H690 mm -Weight: 238 kg

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 390701, For sale: a two-head welding machine, URBAN model AKS 3900. The machine is in perfect working order. It was used in a single-shift production environment. Kledpfx Ahozd Ra Ts Eou Year of manufacture: 2021. Purchase invoice date: 2022.

Condition: good (used), Versch Demmler welding table, also available individually with numerous accessories. 1 piece, 2000x4000 mm 3 pieces, 2000x1000 mm Thickness: 200 mm, hole spacing: 100 mm Kedpfxoy Hf Ndo Ah Eslu Table extensions: 1500 x 200 mm, 3 pieces Table extensions: 1000 x 200 mm, 2 pieces

Condition: used, functionality: fully functional, Spot Welding Machine Fab. Dalex Type SF 8 Technical Data Manufacturer: Dalex Type: SF 8 Rated power at 50% duty cycle: 8 kVA Kodpfxsx Ic T Ao Ah Ejlu Rated primary voltage: 380 V / 50 Hz Max. welding power: 23.7 kVA Max. short-circuit current: 8.8 kA Cooling water flow rate: 4 l/min Electrode force: 17 to 390 daN Open circuit voltage: 2 to 3.2 V Stages: 4 Throat depth: 235 mm Dimensions: L 750 x W 350 x H 1100 mm Weight: 77.5 kg All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Condition: good (used), Welded frame, used Kodpfsy At A Dex Ah Ejlu Manufacturer: CREA-SWISS Technical Data Brand: CREA-SWISS Max. frame size: 3,000 x 2,400 mm Min. frame size: 470 x 610 mm Profile height: up to 115 mm Height tolerance compensation: from -1 mm to +1 mm Dimensions: L 3.6 x W 1.5 x H 2.0 m Weight: 280 kg Advantages - Single-operator device: set external dimensions, insert profiles, adjust height differences, and weld completely on both sides, all by one person - Precise adjustment for accurate frame construction - Rotatable around the longitudinal axis - Fully welded in a single clamping - Fine adjustment of miter edges - Mobile workstation on castors - Suitable for all types of frames (steel windows, fire doors, or angle steel frames) All information provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2011, Spot welding machine CEMSA ROF 450-1.0x2.4 -MF Kedpfx Ahsynivps Eolu

Condition: used, Year of construction: 2000, functionality: fully functional, Compact resistance butt welding machine from IDEAL-Werk (C.+E. Jungeblodt GmbH, Lippstadt, Germany) for joining band saw blades quickly and reliably. The BAS 050-11 is the entry-level workhorse of the BAS series — ideal for workshops, saw doctors, and sawmills that weld narrower carbon and bi-metal blades and need a dependable, low-footprint machine. Built to the usual IDEAL standard: solid German engineering, simple operation, and the kind of longevity that keeps these machines in daily service decades after they leave the factory. Technical Specifications Type: BAS 050-11 Year of manufacture: 2000 Rated output at 50% ED: 4.5 kVA Kljdpfxszcqn Ns Ah Eeu Connected load: 4.5 kVA Open-circuit (welding) voltage: 2.6 / 4.4 V Max. upsetting force: 2.2 kN Primary voltage: 415 V Frequency: 50–60 Hz Fuse protection: 16 A CE marked — Made in Germany Resistance butt welding for clean, strong blade joints Two-stage welding voltage (2.6 / 4.4 V) for flexibility across blade types Compact and robust — built for continuous shop use Steel strip: 6-50 mm Bandsaw for wood: 6-50 mm Metal bandsaw, bimetallic and tungsten alloys: 6-32 mm Hoop knife: 6-30 mm Stainless steel bandsaw: 6-30 mm

Condition: used, SURFACING AND JIG BORING MACHINE DUAP ZS 80/1400 • Maximum piece length: 1500 mm • Minimum piece length: 70 mm • Maximum piece diameter: 80 mm Kodpozcprmefx Ah Eslu • Minimum piece diameter: 10 mm