Used Straight Edge for sale (4,866)

Condition: used, Used approximately 8,100 litre stainless steel vertical storage vessel. Internal approximately 1750mm diameter x approximately 3000mm straight side. Has welded dished top and bottom heads. Mounted on (4) legs. Specifications: Capacity: 8,100 L Pjdjzn Nr Njpfx Amyjpw

Year of construction: 1995, condition: like new (used), Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW Ppodekth N Nepfx Amyjw conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, table length: 1,500 mm, table width: 130 mm, overall weight: 450 kg, grinding height: 200 mm, input frequency: 50 Hz, - Used machine - Year of manufacture: 1998 - Condition: well-maintained, CE marking TECHNICAL SPECIFICATIONS: - Dimensions of the sanding belt: 2300 x 200 mm - Dimensions of the grinding surface: 800 x 230 mm - Belt speed: 8 / 12 m/s - Dimensions of the work table: 1500 x 130 mm - Dimensions of the tilting work table: 150 x 130 mm Podpfxjzinlwj Amyepw - Tilting angle of the work table: 0 – 45 º - Working height: 870 mm - Diameter of the drive roller: Ø 140 mm - Diameter of the guide roller: Ø 90 mm - Motor power (2 speeds): 3 kW - Motor power for oscillation: 0.22 kW - Diameter of the dust extraction nozzle: Ø 160 mm - Overall dimensions: 1500 x 900 x 1600 mm - Weight: 450 kg

Condition: used, Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding height: 150 mm, input frequency: 50 Hz, - Year of manufacture: 2006 - In stock - After technical inspection - CE certified TECHNICAL SPECIFICATIONS: - Working height: 150 mm - Sanding belt dimensions: 150 x 2150 mm - Two sanding belt speeds - Table dimensions: 22 x 144 cm - Both tables adjustable at an angle within the range of 0-30 degrees - Motor power: 3.5 kW / 4.5 HP Ppedezinpcopfx Amyew - Pneumatic belt tensioning and oscillation - Adjustable platen for sanding veneer on one side and a "back" of 15x75 cm on the other - Attachment, protractor for angle sanding - Additional table for profile sanding - Dust extraction port: diameter 140 mm - Overall dimensions: 144 x 71 x 130 cm (length x width x height) - Weight: approx. 450 kg

Condition: used, TECHNICAL SPECIFICATIONS: – Length of feed rollers: 7800 mm – Roller width: 1430 mm – Roller diameter: 110 mm – Destacking system – Stacker width: 1540 mm – Package depth: 1430 mm – Package height: 1830 mm – Element collection with chains: 1600 mm x 1600 mm Ppedpfx Amsymd I Deysw – Return of crossbars via belt conveyor: 3000 mm – Crossbar stacking up to 1370 mm at lifting height 1700 mm – Total length: 12 m

Condition: used, functionality: fully functional, De Stefani MVT edge grinder 1 grinding unit Maximum workpiece height: 100mm Grinding unit motor: 2.5 kW Self-sharpening grinding unit Manual adjustment of the grinding unit Manual adjustment of the grinding unit angle Grinding unit with oscillation Feed speed adjustable via a variator Feed motor power: 0.74 kW Ppjdpoznu D Rofx Amyew

Condition: good (used), Code: 0458 Brand: ARTECH BIESSE GROUP Model: SINGLE 89-N - CE Standard Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Technical data: Working height up to 120 mm Edge thickness 0,4 - 3 mm Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Pjdoznu Dwjpfx Amyepw Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Weight kg 350

Condition: used, machine/vehicle number: 008689, X axis working area: 6735 mm Y axis working area: 1650 mm Ppodpfxjznuxbs Amyjw Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 65 mm Total number of drilling spindles: 30 Total number of tool changer positions: 22

Condition: used, functionality: fully functional, On offer: SAMCO Unilev 150 edge sander – double-sided, working height 150 mm. Ppsdpozqan Tofx Amyow The machine is used, has undergone technical inspection, is fully functional, and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its double-sided design, which allows for the use of both sides of the sanding belt. The adjustable platen, two belt speed ranges, and tilting worktable enable sanding of straight edges, angled components, veneered components, and internal curves. Specifications: • Manufacturer: SAMCO • Model: Unilev 150 • Working height: 150 mm • Sanding belt dimensions: 150 × 2150 mm • Sanding belt speed: 2 ranges • Number of worktables: 2 • Worktable dimensions: 220 × 1440 mm • One worktable adjustable at an angle from 0–30° • Motor power: 3.5/4.5 HP • Pneumatic belt tensioning and oscillation • Adjustable platen for precise sanding, including veneered components • Fixed opposing belt pressure surface: 150 × 750 mm • Attachment with protractor for angled sanding • Additional table with roller for sanding internal curves • Dust extraction port: Ø140 mm • Weight: approximately 450 kg • Overall dimensions: 144 × 72 × 133 cm (L × W × H) Applications: • Sanding straight edges of solid wood components • Sanding edges of glued components and boards • Precise sanding of veneered components • Sanding edges at an angle • Sanding curves and internal profiles • Preparing edges for painting, oiling, or further processing Additional information: • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-Community supply with a VAT rate of 0%; 23% VAT must be added for domestic sales Financing and transport: • We arrange transport using our MDD fleet or through external carriers • We assist in obtaining leasing or hire purchase financing • The delivery cost depends on the destination and the method of machine transport MDD maszyny do drewna is a company specializing in the sale and service of used woodworking machines. We offer professional advice, technical inspections, repairs, and machine preparation for operation. We support customers both before and during the machine's subsequent use. We regularly update our offer. If you are looking for a machine that we do not currently have, we can help you find and import it. We offer machines from manufacturers such as: SCM, SAC, Martin, Hofmann, Casadei, Kuper, Osama, Altendorf, Casolin, Sicar, Omga, Maggi Junior, Brandt, Felder, Weinig, Olimpia, Impianti, Italpresse, Orma, Manni, Kolmag, Centauro, Meber, Ogam, Cosmec, Unilev, Volpato, Safo, Atlas Copco, Samco, Fini, ABAC, Stema, Stromab, Omec, Bottene, Prodeco, and many others. Contact us for more information, to arrange a machine demonstration, and to find out the transport costs. MDD maszyny do drewna – sales and service of machines for the woodworking industry.

Condition: used, Year of construction: 2008, Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Pedpjznn Upjfx Amyspw Weight of machine approx.: 10 ton

Condition: new, Catalog number: HZ014 – preliminary milling Pedpfx Asza Emhsmyspw – edge trimming – new machine, in stock – CE certificate – professional TECHNICAL DATA panel thickness 8-45mm edge thickness 0.4 mm – 3 mm min panel width 90mm min panel length 170mm feed speed 9m/min pre-milling 12000 rpm front/rear milling 12000 rpm top/bottom milling 12000 rpm edge trimming 12000 rpm polishing 3000 rpm feed motor power 1.13kW glue tank heating power 1.315kW pre-milling power 1.5kW pre-heating power 0.4kW glue spindle power 0.25kW front/rear milling power 0.22kW top/bottom milling power 2×0.37kW edge trimming power 0.37kW polishing motor 0.12 kW and 0.18 kW motor 6.16kW working height of the table 960mm extended support width 560mm extraction connection 3x125mm dimensions L/W/H 3731x720x1636mm weight 915kg The Holzing G-MAX 480 edge banding machine with pre-milling, saw cutting, top-bottom milling, edge trimming, radius scraping, and polishing ensures a high-quality final result on the workpiece. The veneer can be in rolls up to 3 mm thick and in strips up to 4 mm thick. The machine also has a glue tank with a capacity of 1.2 kg. Net price: 99000 PLN Net price: 23571 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: new, Year of construction: 2025, with hinged veneer edge grinding device, for the adjustment of the chip removal oscillating sanding belt Aggregate swivels up to 45 motor power: 2,2kW belt size: 3000 x 200mm table size: 930x350mm weight: ca.360kg roller: 120mm Central connection for suction 140mm Included: Ppsdpfx Aspl Ugajmyew - Miter fence - undercarriage - Grinding shoe rotatable - can be used from 3 sides - contact roller 65mm - exchangeable - extendable table extension - feed console - CEE socket for feed unit

Condition: as good as new (ex-display), Year of construction: 2023, 0,4 - 5 mm Workingpiece thickness from to 10 - 60 mm Feed speed 12 m/min. Psdpfx Asxh Spkjmyspw

Condition: new, Year of construction: 2013, 0,4 - 15 mm Workingpiece thickness from to 10 - 60 mm Ppedsx Dng Ropfx Amysw Feed speed 18 m/min.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 02/96088A, total length: 7,500 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 7,500 kg, Edge grinding machine with 10 programmable profiles, including rounded edges Pre-cutter 10 end faces 4 chamfers 2 water jets Calibration support Belt feed direction from left to right Ppedpfx Aozpy Drjmysw

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Total length 3700 mm Feed speed 8 m/min. Pjdjzmy N Nopfx Amyepw Weight 900 kg

Condition: good (used), Code: 0449 Brand: DE STEFANI Model: MV 1 Automatic single-head edge sander for wooden edges and profiles, solid wood, veneered and various Sander for profiles and rebates with interchangeable pad, tiltable -15° to +90° 2-speed motor rpm 710/1420 – Hp 1,3 – 2,5 Working height mm 100 Automatic feed with variable speed Adjustable inlet guide Compressed air 6 atm Exhaust outlet diameter 100 mm Overall dimensions mm 2100 x 1600 x 1350 h Ppedpfx Aszmyp Aomyow Weight kg 950

Condition: used, Year of construction: 1997, incl. 3-roller feed motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/s, height-adjustable grinding table, table size: 1000 x 350 mm, continuously adjustable pivoting grinding unit from 0 - 45°, angle scale and mechanical lock, fold-up veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central dust extraction connection: 140 mm diameter, sanding belt: 3000 x 150 mm. Location: Nattheim Podpey Dd Igefx Amyepw

Condition: used, Year of construction: 1994, Belt height: 150 mm Belt length: 2280 to 2290 mm Belt speed: 22 m/s Two-sided sanding with oscillation Drive mechanism Veneer sanding mechanism End-face sanding / radius sanding with a small support table Surface sanding with a tilting table Belt direction: right/left Ppsdozd Hngspfx Amysw Location: Nattheim

Condition: used, Year of construction: 2001, Dematic roller curve right or left with straight section 90°-600-540 IR795 RA1643 Make: Dematic Running direction: 90° right running/ left running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Podpfek Abf Rox Amyepw Inner radius (IR): 797 mm length: 1790 mm + 525 mm with straight section, straight piece can be dismantled 3x 300-500V Height frame: 132 mm Height including motor: 275 mm Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2005, Rolling curve 90° straight piece 830 mm Make: Transnorm Type: TS 2712 Year of construction: 2005 Project: N124592 Conveyor angle: 90° Width: 600 mm Outer width: 665 mm Inner radius: 800 mm Ppsdjk Aa Nujpfx Amyow Division of roles: straight piece 85 mm Curve 100 mm Speed.: 0.5 m/sec Optional: 3 supports Shipping weight: 120 kg on euro pallet Transport dimensions: L x W x H = 2800 x 700 x 500 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Pjdok Aa Iwspfx Amyopw Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 working days Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1206 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Usable width (NUB): 390 mm, transfer point 350 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: including lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Ppedpfok Aa I Nex Amyew Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2006, Transnorm roller curve 2 x 90Â ° 670-600 IR816 + straight unit 900-670-600 RA1219 The Transnorm wheel curves with straight gear are from 2006 and in a good (used) condition. It has a central engine of the SEW brand. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 2x90Â ° + straight frame Built: 2006 Condition: good (used) Engine: fully functional Angle: 90Â ° Inner radius (IR): 816 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 600 mm Conveyor length straight section: 900 mm Pjdsk Aa Nispfx Amyopw Motor Type: SEW three-phase motor Engine power: kW 0.55 S1 Hz 50 A 3.05 / 1.75 Funding speed: 0.7 m/sec Drive: Center drive Weight: 360 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports 70,00â ?¬ per piece Price: â ?¬ 3240,00 plus VAT from central warehouse Dr. Sonntag KG 97076 WÃ ¼ rzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Schulz roller curve conveyor left with straight section 90°-450-390 IR795 +1875-450-390 Pedsk Aa Itepfx Amyspw Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik