Used Straight And Cut Machine for sale (88,605)

Condition: reconditioned (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25/699, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, Equipment: emergency stop, A virtually as-new, original Meyer Burger TS23 cut-off machine with the special hydraulic "Zürbeli table" and the large 27-1/6" clamping system is being offered. Additionally, our current DS1 displacement measuring device with HMI is installed. The machine is in truly impeccable condition, fresh from the workshop, having received a complete inspection, maintenance, testing, and service. Codpfx Ajxy Ra Seb Tshf The machine is complete, with original documentation available. The photos are taken by us and are up to date. For further information or to arrange details, please contact us. The machine is available directly from our stock. Prior sale reserved at all times. TIP: We continuously stock further Meyer Burger machines and spare parts – please also visit our website! Feel free to contact us, we will be happy to advise you!

Condition: new, Hiwell cut-28 2020 Brand new 2020 model Hiwell portioning machine, contact us for a demo. For years Hiwell has been developing a portion-cutter with the Cut-28II as a result. Very accurate fixed weight or fixed size portion cutting with the accuracy and consistency of it’s European rivals. This machine is capable of portioning meat, fish and poultry up to a thickness of 50mm and 240mm wide. With a portioning accuracy range higher than ᐳ98%, capable of making 1000 cuts per minute. Comes with a strong modular belt that will last long. Controlled by SIEMENS electrical parts, with CE approved safety protection. Chjdpfxsfg U Hfj Ab Tjf HACCP standard easy operation, low maintenance cost. General information Model CUT28-IV Belt width 254mm Belt speed 5~20m/min Weight error ≤2% Cutting speed 1000 cuts/min Max. product height 50mm Max. product length 650mm Max. product width 240mm Input/Output height 1050±50mm Power 7.55kW Overall dimension 2512×1200×1680mm

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF AgieCharmilles CUT E 600 – Used Wire EDM Machine, Year of Manufacture 2019 The GF AgieCharmilles CUT E 600 from 2019 is a high-precision and reliable used wire EDM machine, setting new standards in productivity, precision, and operating comfort through Swiss engineering and state-of-the-art technology. It is designed to meet the highest demands in tool and mold making, medical technology, and precision manufacturing. Main Features & Benefits ✅ Large Working Area and Robust Construction Traverse paths (X/Y/Z): 600 x 400 x 350 mm Traverse paths (U/V): ± 50 mm Max. workpiece size: 1030 x 800 x 350 mm Max. workpiece weight: 1,000 kg T-shaped design with a lowerable door for easy loading even of heavy workpieces ✅ Maximum Precision and Repeatability Glass scales on all axes for long-term accuracy without recalibration Contour accuracy up to ± 2 µm, surface roughness up to Ra 0.12 µm Thermally stable construction for consistently precise results ✅ State-of-the-Art Digital Generator (IPG) Up to 18% faster processing compared to previous models Anti-electrolysis technology for improved surface quality and increased service life Automatic power adjustment (POWER-EXPERT) to prevent wire breakage Chedjxwk Anepfx Ab Tof TAPER-EXPERT for taper cuts up to 30° over 77 mm height ✅ Intelligent Control – AC CUT HMI with 19” Touchscreen Windows-based control system with intuitive user interface 3D graphics, DXF import, and real-time process monitoring PART-EXPERT and WIRE-EXPERT for optimal cutting conditions and precise results Remote control included as standard ✅ High Productivity and User Friendliness Automatic threading and re-threading, even for hard wires Large 25-kg wire spool for extended operation times Energy-saving ECONOWATT system reduces idle power consumption to < 1 kW Compact footprint (approx. 4 m²) for optimal integration into any workshop Ideal For: ✔ Tool and mold making ✔ Precision components from steel, carbide, or copper alloys ✔ Series production and small batch manufacturing with high quality standards 📌 Our used 2019 machine undergoes professional cleaning, servicing, and thorough testing prior to sale to ensure maximum quality and reliability. 📩 Contact us for a customized offer or a demonstration!

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 5 mm to 300 mm Minimum workpiece length: 250 mm Units: 2 1. Saw cutting unit Random System: Saw cut appearance 2. Brush: Tynex, diameter 210 mm Height adjustment: electric Height display: digital Feed speed: 4 - 14 m/min Motor power saw unit: 1.1 kW Motor power brush: 4 kW Motor power feed: 0.37 kW Machine length: 1400 mm Machine width: 1500 mm Csdpfeupy Spsx Ab Tjhf Machine height: 1600 mm Weight: 700 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 59,480 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 600 mm, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, No reserve price – guaranteed sale to the highest bidder! Cedpfx Asxv Slhjb Tohf Predecessor model of the well-known TruLaser Cell series TECHNICAL DETAILS Category: 5-axis 3D laser cutting system Condition: Fully serviced (twice annually by Trumpf UK) Last service: January 2019 New vacuum pump installed: 28/05/2019 Working Area X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 600 mm B-axis (rotational axis): +100° C-axis (rotational axis): n x 360° Laser Source Model: TRUMPF TLF 3200 Turbo Laser power: 3.2 kW Pilot laser: Present (for programming support) Control & Software CNC control: Siemens 840D with 3.5" floppy disk drive Network connectivity: Available (including analog modem for remote maintenance) Software: ToPs 100 with nesting module & IGES translator + ToPs 800 with fixture design & 3D IGES translator MACHINE DETAILS Beam on: 14,922 h Laser on: 59,480 h Dimensions: 3.0 x 1.5 x 0.6 m EQUIPMENT - Logbook function for laser power monitoring - Power supply cabinets - Closed-loop water cooling with air circuit - 5” high-pressure cutting optics - Setup device - Class 1 laser safety housing with manual sliding door - Extraction unit with particle filter (2,000 m³/h) - Stationary worktable

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, type of cooling: air, welding current (min.): 30 A, welding current (max.): 60 A, Note: This is a Trade-in For sale Schweißring Plasmacut 65P Cjdpfxjxr U Rlo Ab Tohf 30-60 AMP 400 Volt Refurbished, serviced, and tested Including Plasma torch, earth work cable with clampo, and air hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: reconditioned (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 3/22, type of input current: three-phase, input voltage: 400 V, Equipment: emergency stop, Offered here is a Meyer Burger Cutting Machine TS23 featuring a current retrofit, CE certification, and state-of-the-art technology! The machine is equipped with a hydraulic table, the large 27-1/6" clamping system, and removal handling. The deflection measuring device is integrated into the retrofit and HMI. This unit has just been newly refurbished, is in impeccable condition and fresh from the workshop, fully overhauled with new electrical systems, controls, cabling, hoses, etc., and has received comprehensive servicing. The machine is complete and comes with the original documentation. The images were taken by us and are up to date. Please contact us for further information and coordination. The machine is available directly from our stock. Prior sale reserved at all times. TIP: Codpfxsxy Ni Sj Ab Tshf We continuously have additional Meyer Burger machines and spare parts in stock – feel free to visit our website! Get in touch with us, we are happy to advise you!

Year of construction: 2024, condition: ready for operation (used), This EXPERT cut Expert ecocam 2 was manufactured in 2024. It features a high positioning speed of 90 m/min and can handle cutting heights up to 100 mm. The machine operates on a PC-based NC software and supports various tool options including electric oscillating knives and driven circular knives. Ideal for cutting leather, textiles, and foams. For more information about this machine, please reach out to us. Application Types Other Machine Tools Chodpoxrwmvsfx Ab Tef

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,340 mm, total length: 2,600 mm, total width: 2,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, overall weight: 3,300 kg, warranty duration: 6 months, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium Control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Maximum taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Manual tank door (accessible from one side) Chedpsxwktmefx Ab Tef Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of the complete unit: 2600 x 2600 x 2340 mm Total weight of the unit: 3,300 kg The machine will be cleaned, fully overhauled, and functionally tested by us after the order is received. You will receive a 6-month warranty on the machine. We are happy to offer you commissioning of the machine.

Condition: excellent (used), Grinding diameter capacity ~80 mm (Type 2H) Type 2HA variant ~120 mm Maximum in-feed grinding length ~200 mm Maximum through-feed grinding length ~300 mm (with normal guides) Grinding wheel diameter 400 mm Grinding wheel width 200 mm Grinding wheel bore 203.2 mm (8") Driving wheel diameter 254 mm Driving wheel width 200 mm Driving wheel bore 127 mm Main drive motor 11 – 22 kW Driving wheel motor ~1.1 kW Driving wheel speed ~10 – 200 rpm (continuously variable) Machine weight ~3,000 kg Cjdpfx Ajxrvgzob Tohf Footprint / Dimensions ~2,400 × 1,550 mm Voltage 380 V / 50 Hz / 3-phase Extras & Features Hydraulic dressing and trueing devices for both grinding wheel and driving wheel Variable speed drive on the regulating/driving wheel Base flange, support bridge, shims, and additional accessories included in many units The “2HA” variant extends capacity to 120 mm diameter parts. We have two of these machines available.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Path Travel path X-axis: 600 mm Travel path Y-axis: 400 mm Csdjxu Uzcopfx Ab Tohf Travel path Z-axis: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Total weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of input current: three-phase current EQUIPMENT 16 kg spools Note: Dismantling and loading can be carried out by the seller at an additional charge.

Condition: used, Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods Chsdpoit Ev Tefx Ab Tsf +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: like new (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Precision wire EDM machine Mitsubishi MV2400R (year 2018) in excellent technical condition, currently in continuous operation, fully functional and ready for work – very low hours (2,700 spindle hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control system: Mitsubishi M700 series Axis travel: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1,050 × 800 × 295 mm Max. workpiece weight: 1,500 kg Table size: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 μm Complete power supply and cooling system – fully operational Chsdpfxoxu Hvls Ab Tjf Machine dimensions: 2,687 × 3,030 × 2,150 mm Weight: approx. 3,500 kg Equipment and accessories: Original upper and lower wire guides Automatic Wire Threading (AWT) Filtration tank with ion-exchange resin Full set of locating fixtures and base devices (in a case) Wire vertical alignment tool Original documentation and operation manuals Additional equipment purchased for over PLN 40,000: Angular cutting wire guides – upper and lower, 30° Processor battery Precision vise for workpiece clamping Pressure gauge 0–600 PSI – 2 pcs MV power contactor (259320) – 2 pcs CF card with software EDM wire 0.25 mm – 3 new spools 2 sets of new filters Machine transport and handling system Machine condition: Well-maintained, serviced regularly, ready for immediate operation. Complete filtration and cooling systems included. We can assist with transportation, installation, commissioning of the machine, and provide operator training – we have EXPERIENCE. Price negotiable. VAT invoice issued.

Condition: like new (used), functionality: fully functional, Very nice rotary creasing and perforation machine. Brand: Bacciottini, model Rol 70. Vacuum and air non-stop feeding table with Rietchle pump. Handles paper from 80 up to 600 grams, max format 700 mm. Solid construction, made in Italy. Csdpfx Abjxt N Nls Tshf Of course, you are welcome to test this machine with us. We can arrange transport and packaging for you and load it into a truck or container. Ask for a price including transport (location: the Netherlands).

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel (X/Y/Z): 220 x 160 x 100 mm Travel (U/V): +/- 40 mm Chsdpfxexq Akwo Ab Tjf Max. taper: 3° at 80 mm height Wire diameter: 0.07 mm to 0.20 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handbox for convenient machine setup 15" LCD color screen with lift-up keyboard and mouse AGIEVISION control Includes AGIESETUP 3D Includes AGIEDUO twin-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg The machine is cleaned, completely overhauled, and thoroughly tested by our specialists. We are happy to set up the machine at your location and provide thorough training on both operation and control.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Specifications Travels (X / Y / Z): 350 × 250 × 256 mm U / V Axis Travels: ± 70 mm Max. Workpiece Dimensions (LxWxH): approx. 750 × 550 × 250 mm Max. Workpiece Weight: approx. 450 kg Table Size: 620 × 400 mm Chsdpfext Hz Sox Ab Tef Wire Diameter: 0.15 – 0.33 mm (commonly 0.25 mm) Max. Taper Cutting Angle: ± 30° at 100 mm height Positioning Accuracy: ± 2 µm Psw N Hjxdubzjl Icsrb Wire Threading System: Fully automatic, fast, reliable Generator: Intelligent GF AC Cut, real-time spark control Surface Finish: up to Ra 0.1–0.2 μm (after finishing cuts) Control System: AgieVision (ergonomic, touch display, 3D graphics) Dielectric: Deionized water Machine Dimensions (LxWxH): approx. 2200 × 2200 × 2200 mm Machine Weight: approx. 3500–4000 kg

Year of construction: 2023, condition: new, Cut to length machines FORSTNER COMPACT functions: - straightening (rolls diameters 70 mm) Csdpfx Asiy N I Ieb Tohf - slitting (max 7 slitting knives) - cutting (guillotine or roller shear) Available coil width - 1250 or 1500 mm

Condition: excellent (used), Year of construction: 2021, operating hours: 537 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 650 mm, travel distance Z-axis: 200 mm, total height: 2,215 mm, total length: 2,820 mm, total width: 1,700 mm, wire diameter (max.): 0.2 mm, workpiece height (max.): 510 mm, workpiece width (max.): 510 mm, workpiece length (max.): 510 mm, type of input current: three-phase, overall weight: 3,220 kg, empty load weight: 3,320 kg, feed length X-axis: 650 mm, feed length Z-axis: 200 mm, feed rate X-axis: 240 m/min, feed rate Z-axis: 240 m/min, table load: 500 kg, input voltage: 400 V, working range: 510 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, tank capacity: 930 l, cutting speed: 240 mm/min, travel speed (max.): 240 mm/min, input frequency: 50 Hz, input current: 11 A, Equipment: documentation/manual, 2021 Agie Charmilles CUT AM 500 Wire EDM Machine Discover premium Swiss precision with this 2021 Agie Charmilles CUT AM 500 CNC Wire EDM Machine This high-performance wire EDM machine has only 537 erosion hours and comes from a medical device manufacturing environment, ensuring meticulous maintenance and minimal wear. Ideal for high-precision applications in medical, aerospace, automotive, and mold-making industries. Machine Overview Chedpsxtfwxefx Ab Tjf Make/Model: Agie Charmilles CUT AM 500 Machine Type: CNC Wire EDM Machine Year: 2021 Control System: GF Control Erosion Hours: 537 hrs Condition: Very Good – ready for immediate operation Technical Specifications Work Area Max. part dimensions: 510 x 510 x 510 mm Max. part weight (base + parts): 500 kg Dielectric level (min/max): 250–305 mm Performance Max. machining speed: 240 mm²/min Surface roughness (Ra):

Condition: used, Serial number: 10641xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21529 Description: We have a Topcon fc 5000 and hiper sr w/charging, case and pole for sale. Cedpfxexm Tfko Ab Tohf GPS has a top network and service agreement that can be transferred upon sale, according to the owner. Everything works as it should. Ready for delivery

Condition: excellent (used), Year of construction: 2022, Aeoon Full DTG Printing Solution for Sale Included Equipment: - Aeoon Kyo Printer (8 printheads) - Aeoon Compact Printer (8 printheads) - Aeoon PTB Pretreatment Line - 6 m conveyor dryer (two lines) - 3 m conveyor dryer (one line) - RIP software - T-Mini automatic folding device Cedpfx Aboxd U H Re Tohf Aeoon Compact: - 8 printheads - Color configuration: CMYK + White - Uses water-based ink - Integrated humidification system - Two printing axes - Automatic cleaning system - Maximum printing resolution: 2400 dpi - Maximum print area: 1200 x 800 mm Aeoon Kyo: - 8 printheads - Color configuration: CMYK + White - Uses water-based ink - Integrated projection system - Integrated humidification system - Three printing axes - Automatic cleaning system - Maximum printing resolution: 2400 dpi - Maximum print area: 2000 x 980 mm Aeoon PTB Pretreatment Line: - Printing area: 1000 x 3000 mm - 13 nozzles - Speed: 10 m/min - Automatic cleaning system Conveyor Dryers: - Two belt system - Belt width: 700 mm - Belt length: 6000 mm - Feeder length: 1200 mm - Stacker length: 1200 mm - Dryer height: 100 mm - Temperature up to 200°C T-Mini Folding Device: - Fully automatic T-shirt folding - Memory for up to 6 programs - Integrated packaging module

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Cjdexlptujpfx Ab Tshf Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Year of construction: 2023, condition: as good as new (ex-display), PY-1200 is an ideal and professional machine in die-cutting，creasing，embossing and full-stripping various PE coated paper, normal paper, corrugating paper and plastic material. It applies to paper cup,paper box,medical package,wine package,food package and other environmental protection products. Chsdsxnkdgepfx Ab Tef Cut Precision ~ 0.10mm Production Capacity 150-210 times/min Max cutting size 120x64 cm Maximum pressure 350 tons Total power 14.5 kw Total weight 8400 kg overall dimensions 4.2x2.3x1.85 m

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm breedte/dikte: 500/25 mm Chodpjwlkw Defx Ab Tjf hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Hydraulisch ponsen VPO 1000 cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Hydraulische teller VNI 1/36 1 codeerschijf 36 tekens tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 37 kW - 250 bar

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation Chedpsuuz Iisfx Ab Tjf - Clamping bar set

Condition: used, Year of construction: 2004, operating hours: 19,000 h, Serial number: 873xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20699 Specifications: - 2004 model - Approx. 19,000 hours - 17,750 kg - Machine width: 253 cm - Support legs - Shear - Tires (see pictures) - Broken boom - Extra hydraulics - Small leaks in hoses - Trailer hitch - Door lock does not work - Broken front window - Air conditioning - Lights - Ready for delivery Description: Csdewqwrrepfx Ab Tehf We have a 2004 Volvo EW160B wheeled machine with support legs and shear for sale. Small leaks in hoses occur, and the door to the cab does not lock. There are also tires of different dimensions. Otherwise, the machine starts and all functions function as they should, according to the owner. Faults and defects occur and some additional costs must therefore be expected. Ready for delivery Hours: 19000 Own weight: 17750 Total Weight: 17750 Width: 253 Model: EW160B hjulmaskin m/ støtte bein og skjær