Used Steel for sale (17,682)

Condition: good (used), Used stainless steel reactor with magnetic stirrer Item number: 10461 Last application: Cosmetics Volume: approx. 80 liters Type: Standing on 3 legs Material (in contact with media): 1.4404 stainless steel Design: Single-walled Bottom: Conical bottom Top: Arched Operating pressure according to nameplate: -1 / +3 bar Operating temperature: 95°C Dimensions of the container: Outer diameter: 610 mm Height of legs: 1730 mm Distance from drain to bottom: 1620 mm Overall height: 2450 mm Overall width: 760 mm Overall length: 610 mm Materials: Inside: 1.4404 / AISI316 Outside parts: 1.4301 / AISI304 Tsdpefcixrefx Amrjc Equipment: Magnetic stirrer Load cells Outlet: DN50 mm Manhole: 200 mm Spray head Various connections Various accessories

Condition: good (used), Used stainless steel container / transport container / IBC Last application: Chemicals Item number: 10315 Tank cleaned! Volume: 500 liters Type: Standing in a galvanized stacking frame Material (media-contact): 1.4301 / AISI304 Design: Single-walled Bottom: Curved Top: Curved Operating pressure according to nameplate: +0.2 bar Container dimensions: Overall width: 1200 mm Tedpfx Amod I S Uljrjc Overall length: 1000 mm Overall height: 1000 mm Materials: Inside: 1.4301 / AISI 304 External parts: Galvanized steel Features: Nameplate: Yes Discharge diameter: 50 mm Discharge type: DN50 Discharge valve: Yes

Condition: good (used), Used, insulated stainless steel tank with agitator and double jacket Last use: Food Article number: 10340 Volume: Approx. 6300L Type: Standing on three legs Material (in contact with media): 1.4301 / AISI304 Design: Insulated with double jacket at the bottom Bottom: Flat bottom Top: Domed Operating pressure according to nameplate: ATM Tank dimensions: Tank diameter: 2030mm Cylindrical height: 2000mm Distance from outlet to bottom: 330mm Height of legs: 390mm Overall height: 2940mm Overall width: 2050mm Materials: Tjdpfx Aed Nap Romroc Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Domed lid Ø 490mm Outlet diameter: 40mm Slow-speed agitator Cylinder insulated Bottom with double jacket

Condition: good (used), Used stainless steel tank with insulation Item number: 10267 Last known use: Unknown Volume: approx. 1500 L Operating pressure: ATM Type: Suspended on supports Material (in contact with medium): 1.4301 / AISI304 Design: Single-walled with insulation Tank dimensions: Overall height: approx. 2450 mm Overall width: approx. 1250 mm Materials: Tedped Eaa Nofx Amrjc Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Features: Domed lid on the top Insulation Various nozzles Suspended on supports

Condition: not inspected (used), Used stainless steel tank with double jacket Tank has been cleaned! Article number: 10229 Last use: Foodstuffs Volume: Approx. 450L Type: Standing on 3 legs Material (in contact with medium): 1.4301 / AISI304 Design: With double jacket Bottom: Dished bottom Tank dimensions: Tank diameter: 1000mm Tedpfx Aodyuqpomrjc Cylindrical height: 500mm Overall height: 1380mm Height of legs: 450mm Distance from outlet to bottom: 240mm Overall width: 1110mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Dome lid Ø 400mm with sight glass on the top Various nozzles Double jacket

Condition: good (used), Used stainless steel transport/storage container Last use: Foodstuffs Todpfod Rnkyjx Amrsc Article number: 10369 6 units Volume: 1000 L Type: Standing on four legs with forklift tunnel Material (in contact with the medium): 1.4301 / AISI304 Design: Single-walled Bottom: Curved Top: Curved Operating pressure according to nameplate: +1.0 / -0.15 bar Container dimensions: Manhole: 390 mm Outer diameter: 1000 mm Inner diameter: 980 mm Cylindrical height: 1010 mm Distance from outlet to bottom: 200 mm Total height: 1830 mm Total width: 1000 mm Total length: 1000 mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Nameplate: yes Outlet: DN50 DIN11851 Outlet valve: Disc valve

Condition: good (used), Used pressure vessel with double jacket Article number: 10409 Last application: Cosmetics Volume: 662 liters Type: Standing on 4 rollers Material (in contact with media): 1.4404 / AISI316L Design: With double jacket Bottom: Arched Top: Arched Operating pressure according to nameplate: +3 bar Test pressure according to nameplate: +6 bar Max. operating temperature: +145°C Vessel dimensions: Outer diameter: 1150 mm Cylindrical height: 800 mm Height of legs: 1170 mm Distance from outlet to bottom: 800 mm Tjdpfed R Hg Asx Amrec Overall height: 2500 mm Overall width: 1360 mm Materials: Inside: 1.4404 / AISI316L Exterior parts: 1.4301 / AISI304 Equipment: Nameplate: yes Outlet: DN 32 mm Double jacket Top completely removable Various connections

Condition: like new (used), Used heatable/coolable stainless steel container Type: STOC3300TPRW Item number: 10844 Volume: Approx. 3300 liters Type: Upright design on three height-adjustable feet Design: Single-walled with thermoplate Material (wetted parts): 1.4301 stainless steel (AISI304) Surface: Satin-finished outside, BA (IIId) inside Internal weld seams: Pickled, passivated and brushed Max. Operating pressure: Atmospheric Max. Operating pressure thermoplate: 1.8 bar Max. Operating temperature: 95°C Top plate: 15° conical bottom Bottom: conical bottom 15° with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2430mm Equipment: 1x Ø 500mm manhole cover with swivel bracket on the top, EPDM seal 1x ladder bracket 1x thermoplate on cylinder H=900mm on cylinder 1x agitator flange connection IEC250 3x spherical caps / height-adjustable feet with foot plates 1x vent valve DN50 stainless steel unpressurized on the top plate Todpfxsuy Ribo Amroc 1x DN50 DIN11851 spigot outlet in the center of the underbody 1x DN50 DIN11851 spigot on the top shelf with blind cap 1x DN65 DIN11851 spigot on the top shelf with blind cap 1x type plate

Condition: good (used), Conveyor belt, belt conveyor, conveyor belt, belt conveyor, conveyor belt Tedpfx Amsdahcvsroc -Body: made of stainless steel -1x conveyor belt speed: 16 m/min -1x conveyor belt speed: 8 m/min -Drive: 0.55 kW -Transport belt: with carrier -Belt width: 695 mm -Length: 4500 mm -Number: 2x conveyor belts available -Price: per piece -Transport dimensions: 4550/1000/H1630 mm -Weight: 450 kg

Condition: used, Type: 229R200 Winkelstahl: 150x12 / 200x100x12 mm T-Stahl: 120 mm U-Stahl-Flansch: 200 mm Flachstahl: 140x20 / 200x14 mm I-Normalprofil bis: 200 mm Gesamtleistungsbedarf: 7,5 kW Maschinengewicht: ca. 4,1 t Raumbedarf: ca. 1,2 x 1,8 x 2,2 m Tedpfs Dv Nkox Amrjc Profilstahlschere mit - Messertaegertrommel fuer 4 Messerpaare - schnellem Messerwechsel

Condition: used, tank capacity: 600 l, Used stainless steel tank with insulation and heating coil Last known use: Unknown Tedpfxjy Uwyqs Amrsc Item number: 10270 Volume: approx. 600 L Operating pressure: ATM Type: Standing on legs Material (in contact with media): 1.4301 / AISI304 Design: Single-walled with insulation Tank dimensions: Overall height: approx. 2140 mm Overall width: approx. 1220 mm Leg height: 1040 mm Cylindrical height: 850 mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Features: Domed lid on the top Insulation Various nozzles Heating coil on the side of the tank

Condition: used, Used Stainless Steel Millchem Dissolver type FMG25HD. Driven by a 22/15kW, 380V, 1500/750 rpm motor. Stainless Steel Turbine has a diameter of approximately 300mm. Supplied with (1) stainless steel tank with a capacity of approximately 1300 litres measuring 1180mm diameter x 1240mm. Tsdpjzd Urgsfx Amroc

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 12/1992, loading space length: 12,600 mm, loading space width: 2,500 mm, loading space height: 990 mm, total length: 13,200 mm, total width: 2,500 mm, total height: 990 mm, suspension: steel, tire size: 275/75R17,5, wheelbase: 8,500 mm, color: blue, Year of construction: 1992, = Additional Options and Accessories = - LEAF SPRING SUSPENSION - Toolbox = Notes = HEAVY DUTY TRAILER ETC 0027-01, 2-AXLE STEPDECK MACHINE TRANSPORT TRAILER WITH RAMPS AND STEEL SUSPENSION!! TRAILER AXLES!! DRUM BRAKES!! STEEL SUSPENSION!! 8 TIRES!! OPEN BODY SIZE: LENGTH x WIDTH 12.60 x 2.50 x 0.99 M!! 2-SECTION RAMPS!! STEEL FLOOR!! MORE TRAILERS (ALL TYPES) IN STOCK FOR SALE (> 75 TRUCKS/TRAILERS IN STOCK!!) SHIPMENT, TRANSIT REGISTRATION, LOADING, STACKING, OR TRANSPORT? NO PROBLEM FOR US BECAUSE WE ARE A "ONE-STOP-SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! (/) YOU CAN ALSO VISIT OUR WEBSITE: ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Axle Configuration Tire Size: 275/75R17.5 Axle Brand: KASSBOHRER Brakes: Drum Brakes Suspension: Leaf Spring Suspension Rear Axle 1: Twin tires; Max. axle load: 9000 kg; Tire tread depth left inside: 20%; Tire tread depth left outside: 20%; Tire tread depth right inside: 20%; Tire tread depth right outside: 20% Rear Axle 2: Twin tires; Max. axle load: 9000 kg; Tire tread depth left inside: 40%; Tire tread depth left outside: 40%; Tire tread depth right inside: 40%; Tire tread depth right outside: 40% Weights Unladen weight: 6,600 kg Payload: 29,400 kg GVW: 36,000 kg Functional Tjdpfozu Tg Djx Amrsc Body Brand: TRAILOR ETC 0027-01 Loading platform height: 99 cm Condition Technical condition: good Optical condition: average Further Information Please contact the Sales Department for further information.

Condition: excellent (used), ROSSI & CATELLI OLIMPIC TC XX/ASD Aseptic Multitubular Sterilizer – Stainless Steel ROSSI & CATELLI OLIMPIC TC XX/ASD aseptic multitubular sterilizer, designed for the continuous thermal treatment of liquid, semi-liquid, and viscous food products in aseptic processing lines. The system uses tubular/multitubular heat exchange technology to heat and subsequently cool the product indirectly and in a controlled manner. It is designed for processes where sterilization conditions must be achieved before proceeding to storage or aseptic filling. Its extensive configuration of stainless steel tubular sections provides a large heat exchange surface area and allows the different phases of the process to be integrated into a single unit. MAIN FEATURES -Manufacturer: ROSSI & CATELLI -Series: OLIMPIC -Model: TC XX/ASD -Type: Aseptic multitubular sterilizer -Tubular/multitubular heat exchange technology -Continuous thermal treatment -Indirect product heating -Heating and cooling sections -Thermal holding tubes -Stainless steel construction -Multiple heat exchange modules -Sanitary connections Tjdpfx Aozw E D Tjmroc -Self-supporting industrial structure -Designed for aseptic processes -Integrable into complete aseptic processing and filling lines PROCESS The ROSSI & CATELLI OLIMPIC TC XX/ASD is designed to continuously perform the different stages necessary for the thermal treatment of the product. The product circulates through the multitubular system, where it can pass through different phases of preheating, heating, sterilization, thermal holding, and cooling, depending on the configuration and parameters established for each process. Indirect exchange allows for controlled product temperature while keeping it separate from the heat transfer fluid. It can be integrated with: -Product preparation tanks -Sanitary pumps -Homogenizers -Deaerators -CIP systems -Aseptic tanks -Aseptic fillers -Complete UHT/aseptic processing lines APPLICATIONS Especially suitable for the juice, processed fruits and vegetables, tomato, sauces, purees, concentrates, and other liquid or viscous food products that require continuous thermal treatment. Depending on its configuration, it can be used for fruit juices, purees, and pulps, concentrates, tomato products, sauces, and other pumpable products intended for aseptic processing. The combination of ROSSI & CATELLI technology, the OLIMPIC system, and multitubular configuration provides an industrial solution for continuous sterilization and aseptic production processes. Machine available for inspection. Additional technical information, dimensions, photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars Tedsztwx Uepfx Amrec agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: good (used), total height: 350 mm, overall weight: 5,000 kg, total width: 1,500 mm, table height: 350 mm, total length: 4,200 mm, Used steel clamping table Tsdpouzaafsfx Amrjc 4200 x 1500 x 350 mm Weight approx. 5000 kg

Condition: used, - Flat bottom tank with 2% slope - Brand : ALFA LAVAL - Total capacity : 30200 liters - Material : 316 L stainless steel - Interior finish : Cold rolled - Exterior finish : Cold rolled - Temperature controlled ROOF - Conical - 1 off-center chimney at the front Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 - 1 connection for level sensor BOTTOM - 2% sloped plate with drain - 1 total drain valve with plug DIMENSIONS Tjdow Ngqtepfx Amroc - Diameter : 2800 mm - Total height : 6000 mm - Ferrule height : 4800 mm - Conical upper dome : 500 mm - Chimney : 300 mm

Condition: used, Stainless steel (V2A) agitated tank, upright design Technical Data / Dimensions Available units: 2 Volume: approx. 86,000 liters Tank type: agitated tank Condition: used Suitable for food: yes Design: upright Inner diameter: approx. 3,600 mm Outer diameter: approx. 3,650 mm Cylindrical height: approx. 9,500 mm Total height: approx. 11,000 mm Specific gravity of medium: 1.05 t/m³ Operating pressure: non-pressurized Material / Specifications Inner shell material: V2A (1.4301) Internal welds ground smooth Equipment Support structure: profiled feet Number: 6 Mounting: fixed Feet adjustable in height Bottom design: torispherical bottom Top/bottom: torispherical head Top: 1 x agitator flange 1 x level measurement port 2 x lifting lugs 1 x threaded nozzle DN 65 for CIP 1 x vent nozzle DN 400 (without cover) 2 x ladder hooks Shell: 1 x manway (340 x 440) with cover 1 x clear drain nozzle 1 x threaded nozzle DN 65 1 x nameplate 1 x ladder hook 1 x sampling valve Various cable ducts to vessel top Bottom: 1 x residue outlet (approx. DN 50) with outlet pipe (cut off) 1 x nozzle for level measurement Agitator Agitator present Tsdow Ibi Ijpfx Amrec Type of agitator: beam agitator Number: 1 Mounted: from above Number of agitator levels: 3 Bottom bearing for agitator shaft present Documentation Sketch

Year of construction: 1999, condition: used, functionality: fully functional, 2 x 173 m³ storage silos made of stainless steel (material 1.4301) (formerly plastic granulate silo) Technical data / Dimensions Available quantity: 2 Volume: approx. 172,000 liters Container type: Silo Condition: used Design: vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 20,000 mm Weight: approx. 9,000 kg Specific weight of the medium: 0.6 tons/m³ Operating pressure: non-pressurized Ground clearance: approx. 500 mm Material / Properties Todpfx Aoxvtvusmrsc Material of inner lining: Stainless steel Notes: Material: 1.4301 Support structure: Base ring / base flange Type of bottom: Conical bottom Slope: approx. 15% Type of bottom (lower part): Cone Cone angle: 60 degrees Top: 1 x roof edge railing, height: approx. 1,200 mm 1 x walkway with platform 2 x crane eyes 1 x manhole DN 600 1 x connection flange for level measurement 1 x welded-in nozzle for full level indicator 1 x flange DN 100 (filling) 1 x vent with cap Shell: 1 x operating room door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100 ending in a TW connection 1 x welded-in adapter for empty level indicator Bottom: The silos end at the bottom in a 60° cone with an emergency shut-off valve and a mounted extraction spout (see photos). A three-section ladder with back protection and rest platforms is available as an option.

Condition: used, mileage: 397 km, power: 88 kW (119.65 HP), first registration: 03/2025, fuel type: diesel, empty load weight: 3,425 kg, maximum load weight: 75 kg, overall weight: 3,500 kg, tire size: 205/70 15C, tire condition: 100 %, axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2025, operating hours: 397 h, front tire size: 205/70 15C, rear tire size: 205/70 15C, Equipment: ABS, central locking, cruise control, electronic stability program (ESP), hydraulics, immobilizer system, sliding door, soot filter, truck registration, Reference number for inquiries: 81099 Isuzu, M 21 Tedpfxeyrbrdj Amroc * Year of manufacture: 2025 * ABS, Anti-lock Braking System * ESP * Electric window lifts * Particulate filter * Power steering * Immobilizer * Central locking * Additional hydraulics * Electric windows and mirrors * Central locking via remote control * AdBlue tank * Cruise control * Transmission type: Manual gearbox * Suspension: Leaf spring * Gross vehicle weight: 3,500 kg * Curb weight: 3,425 kg * Payload: 75 kg * Max. permissible total weight: 3,500 kg * Tire condition (front axle): 100% -- 100% - Tire size: 205/70 R15C * Tire condition (rear axle): 100%|100% -- 100%|100% - Tire size: 205/70 R15C * Tire sizes: 205/70 R15C * Oil & Steel Snake 24 aerial platform * 3 seats * Basket and ground controls * Working height: 23.5 m * Platform height: 21.5 m * Platform capacity: 250 kg * Lateral outreach: 13.0 m * Work basket: 1400 x 700 x 1100 mm * Slewing range: 400° * Basket rotation: +/- 90° * Stabilizers: H-style – Max. total weight: 3,490 kg Disclaimer: Specifications are subject to change, prior sale, and errors excepted More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Application for all (export) documents * Ordering export / customs license plates * Vehicle preparation (e.g., new tarpaulins, lettering, painting, etc.) * Professional loading and load securing * TÜV inspections and registration services * Delivery/transport of commercial vehicles Ask our trained specialist staff – we are happy to advise you.

Condition: excellent (used), axle configuration: 2 axles, first registration: 04/1999, suspension: steel, color: white, Year of construction: 1996, Axle brand: ROR Brakes: Drum brakes Suspension: Leaf spring suspension Rear axle 1: Fitted with dual tires Rear axle 2: Fitted with dual tires Technical condition: very good Visual condition: very good Tjdpfx Amozgg D Toroc Please contact Thierry Leemans for further information.

Condition: ready for operation (used), Rema-4-Station Grinding Machine -Angle adjustable -Tilt adjustable -Oscillating -Cooling system -Work light Dimensions: L x W x H 1.5 x 1.5 x 1.5 meters / Weight 450 kg Errors and omissions excepted. Tsdpoztdzpofx Amrjc

Condition: used, axle configuration: 3 axles, first registration: 08/2026, color: other, Year of construction: 1998, Empty weight: 5.380 kg Axle 1: left 12mm right 12 mm Tjdpfxszw Eq Ho Amrsc Axle 2: left12 mm right 12 mm Axle 3: left 16 mm right 16mm We have the possibility to stack trailers!

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Todpodzc Rxjfx Amrec Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: good (used), mileage: 653,000 km, power: 170 kW (231.14 HP), first registration: 07/1995, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 4,050 mm, fuel: diesel, fuel tank capacity: 300 l, color: orange, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro2, suspension: steel, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 1995, Equipment: ABS, differential lock, = Additional Options and Accessories = - 6-speed manual transmission - Heated exterior mirrors - Leaf spring suspension - Comfort driver's seat - Differential lock - Speed limiter - Hydraulic system - Radio/CD player - Rotating beacon - Power take-off (PTO) - Power take-off (PTO) = Notes = GOOD CONDITION M.A.N. 17.232F (F90 / 6-CYLINDER ENGINE) 4x2 FULL STEEL CHASSIS WITH CONTAINER SYSTEM & MANUAL GEARBOX!! 230HP, EURO 2, 6 CYLINDER ENGINE (MECHANICAL PUMP & INJECTORS)!! 6-SPEED MANUAL GEARBOX!! FULL STEEL SUSPENSION!! LOCKING DIFFERENTIAL!! P.T.O.!! HYDRAULIC KIT!! ETC.!! CONTAINER BODY!! SIZE CONTAINER SYSTEM; LENGTH x WIDTH x HEIGHT Approx.: 4.70 m x 2.50 m!! TRUCK IS IN GOOD WORKING CONDITION, READY FOR THE JOB!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 6x6 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE AN "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! (/) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 6,587 cc Transmission Transmission: ZF 6-SPEED MANUAL, 6 gears, manual gearbox Axle Configuration Tsdpfx Aozu R Rgemroc Tire size: 315/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Max. axle load: 7100 kg; Steered; Tire tread left: 40%; Tire tread right: 40% Rear axle: Double tires; Differential lock; Max. axle load: 11500 kg; Tire tread left inner: 20%; Tire tread left outer: 20%; Tire tread right inner: 20%; Tire tread right outer: 20%; Reduction: single reduction Weights Unladen weight: 8,180 kg Payload: 8,820 kg GVW: 17,000 kg Functional Body brand: MEILLER CONTAINER BODY Loading platform height: 100 cm Condition Technical condition: very good Optical condition: very good Further information Please contact the Sales Department for further information.