Used Star Sb 16 for sale (96)

Condition: used, Year of construction: 2003, operating hours: 86,000 h, machine/vehicle number: IntNr231169, STAR CNC Swiss-type lathe SB 16, Year 2003 CNC control: FANUC 18i-TB Technical Data - Number of axes: 6 - Number of spindles: 2 Dedpfx Asz Irttsl Aeku MAIN SPINDLE - Max. bar diameter: 16 mm - Z-axis stroke: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - C-axis minimum resolution: 0.001 SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 8,000 rpm - C-axis minimum resolution: 0.001 Bar feeder: FMB Minimag 3200/A Bar diameter: 2–16 mm Bar length: 3,200 mm Kraft & Bauer fire suppression system Mayfran chip conveyor Operating manual included The machine can be powered up and inspected by appointment. Technical data and specifications subject to change and prior sale; errors excepted!

Condition: used, Year of construction: 2020, Star SB-20R Type G CNC Sliding Head Lathe with Fanuc Series Oi-TF CNC Control, 5 Axis Machine, Twin Spindle Collet Chucks, 16 Tool Positions, up to 7 Turning Tool Positions, 4 Sleeve Tool Positions, 5 Driven Tool Positions, (5 Spindle Cross Drilling Unit ER11/16 0M151), 20mm Max Work Piece Diameter, Main Spindle Speed 10,000rpm, Sub Spindle Speed 9000rpm, Fire Trace Automatic Fire Suppressant System, Parts Catcher & Conveyor. S/No. 7009 (0374) (2020), 1750kg with FMB Micromag 20 6 meter Barfeed. Country of Origin: Japan Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dksdsz Armxopfx Al Asu

Condition: good (used), Year of construction: 1997, functionality: fully functional, 1 x CNC long-turn lathe Star SA 12/16 Year of manufacture: 1997 Control system: Fanuc 18 i-T with loading magazine Dkedpfoz Hccisx Al Asu Iemca CH 220/32 Year of manufacture: 1998 Technical data: Spindle bore: 16 mm Spindle travel: 140 mm Main spindle speed: 500 - 12,000 rpm Counter spindle speed: 500 - 8,000 rpm Speed: driven tools: 0 - 4,000 rpm (remaining data see photos) Approximately 6 months ago, the counter spindle was fitted with new bearings. The machine can be inspected while in operation and under power.

Condition: used, Year of construction: 2000, operating hours: 43,000 h, machine/vehicle number: IntNr231493, STAR SA 16-12 CNC sliding headstock lathe, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 43,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 Dodpfxjz Iruwe Al Asku SUB SPINDLE - Maximum bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to prior sale. Technical data and specifications subject to change and correction.

Condition: used, STAR SR-16 R is a CNC automatic lathe / CNC Swiss type lathe offering high precision, accuracy and reliable performance. Capacities: 7 axes, 2 spindles, max turning length 205 mm, spindle bore 16 mm, max drilling Ø10 mm; travels X1 16 mm, X2 40 mm, Y1 89 mm, Z1 205 mm, Z2 80 mm, C‑axis spindle resolution 0.01°. Specs: main spindle up to 12,000 rpm, back spindle up to 8,000 rpm, driven tool speeds 8,000 rpm, rapid traverse 20 m/min; supply 3x400 V 50 Hz, total power 6 kVA; weight ~2200 kg, footprint 2207×1080×1700 mm. Accessories: LNS SUPER HYDROBAR bar feeder, ELBARON oil‑mist extractor, transformer. Achieves tight tolerances; suited for automotive, watchmaking, machine tools, aerospace and medical sectors Dkodpfjz Dvz Tex Al Asu

Condition: used, Year of construction: 1996, turning diameter over bed Ø16 mm mm Dodpeztfw Esfx Al Aeku weight of the machine ca. 2,3 t dimensions of the machine ca. 2045 x 900 x 1685 m

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 119, spindle motor power: 5 W, turning length: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 99 rpm, turning diameter: 16 mm, overall weight: 2,300 kg, type of input current: three-phase, bar passage: 16 mm, total width: 1,340 mm, total length: 1,850 mm, total height: 1,685 mm, input voltage: 380 V, number of driven tool stations in tool turret 1: 6, number of driven tool stations in tool turret 2: 6, Equipment: documentation/manual, rotational speed infinitely variable, I am offering my lathe for sale, complete with the accessories shown in the pictures. It includes a bar feeder and a chip conveyor. Dsdpfx Aljy Udcfo Asku The machine is controlled by a Yasnac CNC system. The machine has two turrets, allowing for multi-axis and multi-group control.

Condition: used, Year of construction: 2015, operating hours: 16,432 h, functionality: fully functional, 𝗦𝘁𝗮𝗿 𝗦𝗥20 𝗝 𝘁𝘆𝗽𝗲 𝗖 Year 2015 Production hours : 16432 h Oil tank Iemca bar loader Fanuc command 31i Model B Parts belt conveyor Fanuc command 31i Model B Dkjdszmw Dkjpfx Al Aeu

Condition: used, STAR SB-20R type N is a CNC automatic lathe (CNC Swiss type) engineered for high-precision work with superior accuracy and reliability. Capacities: max turning Ø 20 mm, max drilling Ø 10 mm, max threading Ø 8 M; total 5 axes, C-axis resolution 0.001°. Specs: spindle stepless 500–10000 t/min, rapid traverse 35 m/min, spindle motor 2.2/3.7 kW, total power 3.7 kVA, 50 Hz 3x 400 V, weight ≈1800 kg, dimensions L2070 × W1770 × H1760 mm. Accessories: C axis, workpiece conveyor, chip conveyor, coolant system, RS232 and USB interfaces. Achieves tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace and medical sectors. Dkjdpfjyxnztsx Al Asu

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: BI-183/600, total length: 3,866 mm, total height: 2,841 mm, overall weight: 2,000 kg, input voltage: 400 V, track width: 600 mm, type of input current: three-phase, power: 16 kW (21.75 HP), construction width: 1,500 mm, input frequency: 50 Hz, For sale: Inject Star BI-183/600-C COOL industrial brine injector with integrated cooling, manufactured in 2009. This machine is designed for injecting brine and marinade into meat and poultry products and is suitable for professional use within the meat processing food industry. The COOL version features a cooling system, allowing the brine/marinade to be kept at a controlled temperature during the production process. This is a significant advantage for product temperature, process control, and food safety. Technical specifications: Manufacturer: Inject Star Type: BI-183/600-C COOL Machine: Brine injector Dedpozxf Dijfx Al Ajku Version: with cooling / COOL system Year of manufacture: 2009 Connection power: 16 kW Electrical connection: 3 × 400 V / 50 Hz Minimum air pressure: 6 bar Maximum air pressure: 10 bar Machine number: BI1836-123 Stainless steel industrial version CE-marked Suitable for injecting beef, chicken, poultry, and other meat products with brine, marinade, or similar liquids. The machine can be inspected by appointment. Additional information, photos, and technical details are available upon request. English version for MachineSeeker: Inject Star BI-183/600-C COOL industrial brine injector with integrated cooling system, year 2009. The machine is designed for injecting brine and marinades into meat and poultry products and is suitable for professional use in the meat processing industry. The COOL version is equipped with an integrated cooling system, allowing the brine or marinade to be kept at a controlled low temperature during production.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Travel : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] Dedezk Rrvepfx Al Aeku - Spindle power : 1 [kW] GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 4.6 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.070 x 1.177 [mm] - Machine height : 1.760 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of hours under power : 42640 [h] - Number of working hours : 23491 [h] - Number of spindle hours : 12535 [h] EQUIPMENT - CNC : Fanuc Oi-TD - 3 colors status lamp - Rotating guide bush - Ejection of workpiece - Parts catcher - Parts conveying strip - Coolant tank - Bar loader : IEMCA SMART 320 / 32 LL - Electric transformer

Condition: used, Year of construction: 2001, STAR sliding headstock automatic lathe S16-R, year of manufacture from 2001. Sliding headstock lathe SA16-R, Ø16mm with FMB Minimag magazine. Sub spindle. Parts conveyor belt. Coolant system has only operated with oil. No chip conveyor. Dedpfx Ajxmurrel Aoku

Condition: ready for operation (used), Bar Capacity: 0.63" (16 mm) Spindle Speed: 10,000 RPM Max. Headstock Stroke in one chucking: 12" (305 mm) Dodpfx Alsw Rfcqe Asku Max. Drilling Diameter: 5/16" (8 mm) Max. Milling Diameter: 2/5" (10 mm) Max. Slotting Capacity: 1.5 mm x 4 mm Spindle Indexing: 15 degrees Main Spindle Motor: 2.2 kW / 3.7 kW Power Driven Attachment Motor: 0.4 kW Number of Tools: 9 Number of Live/Rotary Tools: 2 Rotary Tool Speeds: 350 – 5,000 RPM Max. Chucking Diameter: 5/8" (16 mm) Max. Length for Front Ejection: 5" (127 mm) Max. Drilling Diameter: 1/4" (6.5 mm) Number of Tools: 3 Sub-spindle Speed: 400 – 6,000 RPM Sub-spindle Motor: 1.5 kW Dimensions: 81" x 46" x 67" (2,057 mm x 1,168 mm x 1,702 mm) Weight: 5,100 lbs (2,313 kg) Options: Fanuc Bar Feeder IEMCA MINI BOSS 325r Live Tooling (not working) Sub Spindle

Condition: good (used), Year of construction: 2000, functionality: fully functional, Controller Fanuc 18i-T NC controlled axes 6 Original Japan With barfeeder FMB mini turbo 2-16 / 3200 A For 3 m bars Max. turning dia 16 mm Max. drilling capacity 7 mm Max. tapping capacity M6 Rapid feed in X/Y/Z/ZB = 20/20/20 m/min Rapid feed in A = 78,5 m/min Feedrate in X/Y/Z/ZB = 10/10/10 m/min Feedrate A = 10 m/min Main spindle speed 500 - 12000 rpm Main spindle power 100/40% ED/Power 2,2 kW Outer tool places 6 Driven tool places 3 Rear side operation Max. turning dia D16 mm Max. part length 85 mm Sub spindle speed 500 - 8000 rpm Sub spindle power 0,55 kW Max. drilling capacity 4 mm Max. tapping capacity M3 Weight 1700 kgs Dimensions LxWxH = 2163 x 770 x 1650 mm Features, accessories - FMB Mini Turbo barfeeder 3 meter - C axis on both spindles Djdpoxvbbfsfx Al Aeku - Low volt lamp - Hydraulic unit - Coolant unit (run with oil) - Central lubrication - Door interlock - Ready part conveyor The lathe was removed from production recently. Good condition.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 12000 [rpm] - C axis indexing precision : 1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] Dkodpszkb Etefx Al Aju - Spindle speeds : 8000 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 3 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of working hours : 73252 [h] - Number of spindle hours : 50900 [h] EQUIPMENT - CNC : Fanuc 18iT - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Bar loader : IEMCA CH 220/32L - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer - Number of turning tool holders : 3

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: 000716, turning length: 130 mm, spindle speed (max.): 8,000 rpm, overall weight: 1,300 kg, bar passage: 16 mm, type 510 j - equipped with Iemca MiniBoss 325/37 new in 1996 - tool eye - accessories - Fanuc 18-TB Control Dsdjwrdxbopfx Al Asku

Condition: used, Tumbler Inject Star Magnum 2600 COOL with Lifter Dksdpfx Aljzu Dcve Aju

Condition: used, Year of construction: 2011, STAR ECAS-20 — CNC SWISS-TYPE AUTOMATIC LATHE MACHINE IDENTIFICATION — VERIFIED FROM NAMEPLATE Manufacturer: Star Micronics Co., Ltd., Japan Model: ECAS-20 Type: 570 Manufacturing date: March 2011 Serial number: 0509 Lot number: 047 Supply voltage: AC 200 V, three-phase Frequency: 50/60 Hz Rated apparent power: 8.0 kVA Machine weight: 3,500 kg CE marking: Present MODEL SPECIFICATIONS — MANUFACTURER DATA Configuration: 10 axes; independent front/back machining; simultaneous two-tool turning Control system: Star Motion Control System Maximum machining diameter: 20 mm Headstock stroke: 205 mm MAIN AND SUB-SPINDLES Maximum speed: 10,000 rpm each Motor output each: 2.2 kW continuous / 3.7 kW for 30 minutes C-axis indexing: 0.01° each Sub-spindle chucking diameter: 20 mm Front-ejection length: 80 mm Workpiece projection: 30 mm TOOLING Turning positions: 4 front, 2 rear Tool shank: 12 mm; optional 16 mm Sleeve-holder positions: 4; optional 2 rear-end stationary tools Stationary drilling: Ø10 mm Tapping/die-cutting: M8 × 1.25 Optional driven positions: 3 front, 3 rear Driven-tool speed: 8,000 rpm Dodpfx Aljz D Ezvs Ajku Driven-tool motor: 0.75 kW Driven drilling: Ø8 mm Driven tapping: M6 × 1.0 Milling: Ø10 mm Slotting: 1.5 mm wide × 4 mm deep BACKWORKING Tool positions: 4 Drilling, stationary/driven: Ø10/Ø8 mm Tapping, stationary/driven: M8 × 1.25 / M6 × 1.0 CAPACITY AND DIMENSIONS Coolant tank: 120 litres Machine dimensions (W × D × H): 2,588 × 1,150 × 1,765 mm Overall installation dimensions with peripherals: Unconfirmed EQUIPMENT VISIBLE IN PHOTOGRAPHS Bar-feeding equipment with pendant control Fire-suppression cylinder and automatic CO₂ warning label CNC operator panel

Condition: used, Year of construction: 2022, functionality: fully functional, For sale, starting from our location in 45888 Gelsenkirchen, are two Inject Star P-60 residual meat recovery systems, including bone crushers and accessories. These systems are used, manufactured in 2019 and 2022, and come from a business liquidation. Dksdoz Iz Tcopfx Al Aou Currently, both systems are still operational and can be inspected on-site by appointment. Disassembly, loading, and transport are the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Main spindle Dodpoycp Nlsfx Al Asku Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h EQUIPMENT FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500.

Condition: good (used), Year of construction: 2013, operating hours: 33,100 h, functionality: fully functional, Equipment: documentation/manual, CNC long-turn lathe Manufacturer: STAR Type: SR-32J Year of manufacture: 2013 Djdpfx Ajz Ipryel Aoku FANUC 32i control system Rear-end machining Synchronous spindle Powered tools C-axis Parts conveyor Chip conveyor Oil mist extraction system Tool monitoring Bar loader magazine FMB TURBO 3-36

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, STAR SR20J II TYPE A Year 2023 Fanuc CNC Control 32i model B 20mm Maximum Bar Capacity Y-Axis & C-Axis Capability Live Tooling ALPPS TOOL CO ASR X-20ASII BARFEEDER LNS Swarf Conveyor Very Low Hours Brass-Only Production Since New Selection of Tooling & Consumables Included Dsdpfx Ajzqdukol Ajku Machine available near end september 2026

Year of construction: 2019, condition: used, For sale: a partial injection molding cell consisting of a hydraulic press, a linear Cartesian robot, and a perimeter safety fence. This system is ideal for those seeking a ready-to-use package for molding and automatically unloading parts. The package includes only the 3 items listed below: 1. HYDRAULIC INJECTION MOLDING MACHINE Brand and Model: ARBURG ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN (200 tons) Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Machine weight: approximately 6,500 kg 2. LINEAR CARTESIAN ROBOT Dkedpfxozw H Dbo Al Aju Brand and Model: STAR AUTOMATION XW-1000VI 2V Year of manufacture: 2019 Configuration: 3 servo-assisted linear axes (brushless motors), space-saving telescopic vertical arm. Included: Control cabinet, original operating keyboard (remote control) for programming, and manuals. 3. PERIMETER SAFETY FENCE Manufacturer: Star Automation Europe Features: Modular structure with a metal mesh to protect the work area. Access door equipped with safety microswitches and an interlocked electric lock. Included: External control panel for access requests and emergency chain reset.

Year of construction: 2006, condition: excellent (used), STAR ECAS 32 T CNC automatic lathe - Very good condition - Many accessories available - Detailed photo gallery included in PDF catalog TECHNICAL DATA Max. Machining Diameter: 32 mm Max. Headstock Stroke: 350 mm Tool Post: First Turret: 10 stations Second Turret: 10 stations Number of turning tools: Max. 2 tools / station Tool shank: 16 mm Sleeve Holder: Number of tools: Max. 3 tools / station Max. Drilling Capacity: 23 mm Max. Tapping Capacity: M12 X P1.75 Max. Die Cutting Capacity: M12 X P1.75 Power Driven Att. Number of Tools: Max. 2 tools / 1 station Dkedpfx Asl R Ix Sol Aju Max. Drilling Capacity: 10 mm Max. Tapping Capacity: M8 X P1.25 Max. Milling Capacity: 12 mm Max. Slotting Capacity: 2 mm X 10 mm Main Spindle min. indexing degree: 0.01° Main Spindle Speed: 7`000 rpm Power Driven Att. Spindle Speed: 5`700 rpm Coolant Tank Capacity: 230 l Dimensions: 3175 x 1745 x 1860 mm Center Height: 1084 mm Weight: 5`700 kg Power Consumption: 8.0 KVA No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: DA710219, overall weight: 430 kg, load capacity: 10 kg, For sale is a linear Cartesian robot for injection molding machines, manufactured by Star Automation Europe in 2019. The sale includes only the robot itself (mechanical arm and remote control), without the surrounding enclosure, hoppers, or conveyor belts. It is ideal for pick-and-place operations, part extraction, and assisted placement. Technical Specifications: Brand: STAR AUTOMATION EUROPE S.p.A. Model: XW-1000VI 2V Dkodpszw Hy Ajfx Al Aeu Product Code: DA710219 Year of Manufacture: 2019 Certification: Original CE marking Compatibility: Optimized for injection molding machines ranging from approximately 150 to 250 tons (originally used on an Arburg 520). Included in the offer: - Cartesian robot body with 3 linear axes. - Original operating panel (remote control) for cycle programming. - Original user manual and electrical diagrams for the robot. Machine Condition: Used, in excellent mechanical and electronic condition, carefully disassembled.