Used Stapling Heads for sale (9,773)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Itsdpsxppwnsfx Afien

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE DISTANCE BETWEEN CENTRES: 210 - 1290 mm MAX TURNING LENGTH: 1090 mm MAX TURNING DIAMETER: 245 mm BAR CAPACITY: 65 mm SPINDLE: 11-15 kW; 221,5 Nm COUNTER SPINDLE: 6000 rpm; 7,5 - 11 kW HEAD: HSK A63 ; 3,7 - 5,5 kW X1-AXIS TRAVEL: 455 mm X2-AXIS TRAVEL: 222,5 mm Y1-AXIS TRAVEL: ± 70 mm Y2-AXIS TRAVEL: +20 -50 mm Z1-AXIS TRAVEL: 1090 mm Z2-AXIS TRAVEL: 1005 mm B-AXIS TRAVEL: 1080 mm RAPID FEEDS X-Y-Z: 16 - 6-16 - 40 m/min Iodpfxexppnms Afietn DRIVEN TURRET HEAD: 12 + 12 POS; 6000 rpm; 3,7 - 7,5 kW CONTROL UNIT: FANUC 31i-A BAR FEEDER: LNS Mod. Hydrobar Sprint S3 WEIGHT: 16000 Kg OVERALL DIMENSIONS: 5551 x 2925 x 2755 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PIECE CONVEYOR

Condition: excellent (used), Year of construction: 2022, axis stroke (X,Y,Z) 1800 x 900 mm Number of spindle head vertical 1 St. Number of spindles head horizontal 0 St. Dust suction hood 100 mm Number of milling agregates 1 St. Itedpfxsvnwcgs Afisn working dimensions 1800 x 900 mm Year 2022 total power requirement 2,8 kw Dimensions (L/W/H) 2400 x 1400 x 1900 mm Motor output 2,2 kW Capacity 100 m³/h kg/h

Year of construction: 2019, condition: ready for operation (used), Main Drive Number of axis 2 This PEMA Column & Boom HD 4x4 Twin SAW was manufactured in 2019. It features a PEMA control panel with touch screen and WeldControl 100 for precise beam welding. The machine includes twin SAW heads, motorized traveling carriages, and a comprehensive wire feeding system. Ideal for longitudinal-shaped workpieces with a working range of 4m vertically and horizontally. Consider the opportunity to buy this PEMA Column & Boom HD 4x4 Twin SAW laser welding machine. Contact us for more information about this machine. Application Types Iedpfx Afsxpkpfeiotn Welding

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Condition: Function tested Equipment and technical data: Milling unit: 6 kW, water-cooled Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Tool changer: 6-position, lateral Drilling head: 9 vertical drilling spindles, 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Groove saw in X direction Control: Twin CAM 32 Iodpfx Afexpla Seijtn Vacuum pump: 100 cbm/h Incl. vacuum suction cups Travels: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Installation dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Location: Emsland

Condition: new, Clamp length , mm Clamp width , mm 0 , Nm Painting aid for painting the sash and glazing bead frame at the same time RU-LH painting aid for glazing bead frames for processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. At the 4 corners 1 bracket is placed on each of the glazing bead frames. The positioning is done diagonally and in such a way that Itodpsxpi Efofx Afien the brackets protrude approx. 35 mm from the wood, When pressed into the sash frame, a clamping. The glazing bead frame is ready for painting Positioned at a distance of approx. 20 mm in front of the sash. After drying or before installing the sash the glazing bead frame is flush with the sash pressed and only removed again before glazing. The clamps can then be pulled out again by hand become. Stand frame with support table vertical 85°, adjustable in inclination. 2 pieces compensation frames for different glazing bead thicknesses, operation via foot valve. Price on request plus packaging and shipping Option with extra charge: Package of brackets 26 x 50 mm, 4,300 pieces each EUR 74.00 You can find recordings of the painting aid at the end of the video below! (technical information according to manufacturer - no guarantee!)

Condition: excellent (used), functionality: fully functional, workpiece weight (max.): 300 kg, grinding length: 1,500 mm, grinding diameter: 400 mm, TOS BHU 40/1500 Cylindrical Grinding machine, grinding diameter 400 mm, grinding length 1500 mm, very good technical and visual condition. Technical specifications: Grinding diameter: 400 mm Grinding length: 1500 mm Maximum workpiece weight: 300 kg Grinding wheel size: 600 × 150 mm Longitudinal table travel (X-axis): 1–1790 mm Rotating grinding head: ±45° Rotating table: ±5° Spindle taper: Morse 5 Maximum spindle speed: 1240 rpm Iodpfx Afexphdmjietn Total connected power: 22 kVA Machine weight: approx. 6 t

Condition: ready for operation (used), Year of construction: 2011, - USED - TWIN-SPINDLE HEAD 3-AXIS VERTICAL MACHINING CENTRE WITH ROTOPALLET X-AXIS TRAVEL: 520 mm Y-AXIS TRAVEL: 360 mm Z-AXIS TRAVEL: 360 mm DISTANCE SPINDLE NOSE-TABLE: 200-560 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 36 - 10500 rpm; 30 - 35 kW; HSK A63 PALLET: N.2 MAX ADMITTED LOAD: 450 Kg TOOL MAGAZINE: 21X2 POS MAX TOOL DIAMETER: 88 (125) mm Iodpfx Asi Hmm Sofietn MAX TOOL LENGHT: 250 mm CONTROL UNIT: FANUC 31i A5 WEIGHT: 5300 Kg OVERALL DIMENSIONS: 3200 x 3250 x 3245 mm ACCESSORIES: SWARF CONVEYOR ; HIGH PRESSURE COOLANT PUMP ; PAPER FILTER ; TOOL SETTER NOTE: WITH No 1 4th AXIS TABLE

Condition: used, functionality: fully functional, x-axis travel: 400 mm y-axis travel: 220 mm z-axis travel: 400 mm Speed range: 40 - 2000 rpm Speed steps: 18 Internal taper: SK40 Spindle head movement automatic/manual: 190 / 200 mm Itjdpfxsxphn Ee Afion Clamping surface (table): 730 x 240 mm Table longitudinal travel automatic/manual: 390 / 400 mm Table vertical travel automatic/manual: 390 / 400 mm Feed range: 8 - 400 mm/min Rapid traverse: 1200 mm/min Electronic digital display SONY Rotary table Sheet steel cabinet with 5 drawers and various machine accessories, e.g. various spare parts, tool holders, milling cutters, exchangeable table

Year of construction: 2021, operating hours: 280 h, condition: ready for operation (used), Control Unit Brand FANUC Main Drive Spindle speed range 5000 rpm Spindle motor power 11/22 kW Tool taper A2-6 Number of axis 4 Movement X-Axis Movement 165/195 mm Y-Axis Movement +- 50 mm Z-Axis Movement 700/720 mm Turret Number of turrets 2 Tools Number of index 2x12 Media Chip conveyor Yes Internal cooling Yes Additional Equipment USB interface Three-colour signal light 1 set of soft jaws CHIP CONVEYOR HS with lateral ejection Transformer incl. cable Manual compressed air gun Bar feeder interface // Bar loader interface Parts catcher main spindle Parts unloader: Parts unloading system for the counter spindle incl. parts conveyor belt Workpiece ejector / Workpiece drm: 230 mm / Workpiece X: 673 mm Itodpfjxpkn Uex Afijn This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information. Application Types Turning

Condition: repair required (used), Type: DA 260F /2 Machine No.: 007 233 /01 Year of manufacture: 1990 Technical data: Itjdpjxpgrcsfx Afion Centre distance: 2000 mm Centre height: 260 mm Spindle bore: 71 mm Drive power: 7.5 kW Current condition: - Machine bed is in good condition - Frequency converter does not work – the machine keeps shutting down; it simply stops. - Feed mechanism in the headstock needs to be repaired.

Year of construction: 1997, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD Itedoh Stzkepfx Afisn LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1200 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 15 m/min TABLE SIZE: 5000 x 2000 mm SPINDLE: 4000 rpm; 27 kW; 1200 Nm HEAD: A/B AXIS AUTOMATIC ; A 2,5°- B 2,5° ; ISO 50 ; 4000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: SELCA S3045 WEIGHT: 25500 Kg ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: EXTENSION 400mm -ISO50 -6.500rpm; AUTOMATIC HEAD EXCHANGE; PERIMETER GUARDING

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control: SIEMENS 840D Solution Line (electrical overhaul 2017) x-travel: 7.000 mm y-travel: 2.100 mm z-travel: 1.500 mm z-travel vertical: 1.200 mm Universal milling head (orthogonal design) Swivel range of milling head holder: 340 °Grad Swivel range of milling head: 180 °Grad Mounting cone for tools with steep taper: SK50 spindle truning speed range: 22 - 2.240 U/min Feed rate x,y and z-axis: 2 - 12.000 mm/min Rapid traverse rate x,y, and z-axis: 12.000 mm/min Drive power 100% ED / 60 % ED: 31,5 / 39 kW Clamping plate dimensions of clamping plate: 6.000 x 1.500 x 300 mm Number of T-slots: 6 T-slot distance: 250 mm max. load: 10 t/m² Equipped with: NC dividing head PEISELER AWU 650 with vertical faceplate, diameter 650 mm automatic universal milling head, orthogonal, (Completely refurbished 2017, rarely used since then) SIEMENS electronic handwheel 3 support tables various prism support blocks MAYFRAN hinged belt conveyor Coolant system with paper belt filter Work platform moving in the X direction, protective cover with viewing window The machine is in exceptionally good condition and can be viewed while under power. In 2017, a new SIEMENS 840D Solution line control system was installed, all drive motors and the control cabinet were replaced at the same time. Iodpexphm Uefx Afietn

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,900 h, Control Unit Brand HEIDENHAIN Model TNC530 Main Drive Number of axis 3 Movement X-Axis Movement 2500 mm Y-Axis Movement 1000 mm Z-Axis Movement 1000 mm Table Table load 6000 kg Ijdoxpkubepfx Afietn This 3-axis ANAYAK Performer 2500 was manufactured in 2007. It features a Heidenhain TNC530 control unit, a versatile EMENA-VAR-3 milling head, and a robust table size of 2700 x 850 mm. Capable of handling a table load up to 6 tons, with traverse paths of 2500 mm in X, 1000 mm in Y, and 1100 mm in Z. If you are looking to get high-quality milling capabilities consider the ANAYAK Performer 2500 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2018, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 420 mm MAX TURNING LENGTH: 291 mm MAX TURNING DIAMETER: 320 mm SPINDLE: 3200 rpm; 7,5-11 kW X-AXIS TRAVEL: 190 mm Z-AXIS TRAVEL: 350 mm Itedpoq Ilbwofx Afisn RAPID FEEDS X-Z: 24 - 30 m/min TURRET HEAD: 12 POS CONTROL UNIT: FANUC 0i-TF WEIGHT: 3500 Kg OVERALL DIMENSIONS: 2214 x 2220 x 2713 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: WITH 16-POSITIONS GANTRY-TYPE LOADING SYSTEM

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 Isdpfx Afoxphlwoijtn spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm

Year of construction: 2002, condition: ready for operation (used), - USED - 5-AXIS CNC LATHE MAX TURNING LENGTH: 760 mm MAX TURNING DIAMETER: 330 mm BAR CAPACITY: 65 mm SPINDLE: 4500 rpm; 11-15 kW; ASA A2-6 ; 210 mm COUNTER SPINDLE: 6000 rpm; 5,5-7,5 kW; 169 mm X-AXIS TRAVEL: 250 mm Y-AXIS TRAVEL: ± 50 mm Z-AXIS TRAVEL: 830 mm B-AXIS TRAVEL: 830 mm RAPID FEEDS X-Y-Z: 24 - 7,5 - 20 m/min DRIVEN TURRET HEAD: 12 POS; 6000 rpm CONTROL UNIT: FANUC 18i-T WEIGHT: 5350 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2060 mm ACCESSORIES: SWARF CONVEYOR ; Itjdpfx Aommlprsfijn TOOL SETTER NOTE: PART CATCHER WITH BELT; AUTOMATIC DOOR OPENING SYSTEM

Condition: excellent (used), machine/vehicle number: 77WSX22305E5A-135, BENZ - MONO WSX 05 - 90° angle head Mounting: HSK-A100 Collet: ER25-A (clamping range: 0.5–16 mm) Max. torque: 30 Nm Max. speed: 8,000 min⁻¹ Transmission ratio: 1:1 Angle head: 360° adjustable Weight: approx. 8 kg Itedpfx Afoxphlqeion The angle head was used on a MAG HÜLLER HILLE - NBH6+ but can also be adapted or fitted to other machines.

Year of construction: 1995, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 530 mm MAX TURNING LENGTH: 500 mm MAX TURNING DIAMETER: 340 mm BAR CAPACITY: 62 mm SPINDLE: 3800 rpm; 11-15 kW; ASA A2-6" X-AXIS TRAVEL: 260 mm Z-AXIS TRAVEL: 520 mm RAPID FEEDS X-Z: 15 - 20 m/min Itsdpfxsiidpyo Afien TURRET HEAD: 12 POS CONTROL UNIT: OKUMA OVERALL DIMENSIONS: 2815 x 2815 x 1745 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Year of construction: 2014, operating hours: 8,674 h, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 1750 mm MAX ROTATING DIAMETER: 820 mm MAX TURNING DIAMETER: 730 mm BAR CAPACITY: 115 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA 2-11 ; 510 mm X-AXIS TRAVEL: 365+25 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 15 - 12 m/min TURRET HEAD: 10 POS CONTROL UNIT: FANUC 0i-TD WEIGHT: 12800 Kg OVERALL DIMENSIONS: 6200 x 2500 x 2500 mm ACCESSORIES: ROTATING TAILSTOCK ; SWARF CONVEYOR ; ETHERNET PORT ; RS 232 SERIAL PORT ; PCMCIA SERIAL PORT ; Iodeq H Tr Tepfx Afistn USB PORT

Year of construction: 2011, condition: ready for operation (used), - USED - 7-AXIS SLIDING HEADSTOCK LATHE WITH BAR FEEDER MAX TURNING LENGTH: 250 mm BAR CAPACITY: 38 mm SPINDLE: 6000 rpm; 11 kW COUNTER SPINDLE: 7000 rpm; 5,5 kW Iedpfx Afsxppnteiotn DRIVEN TURRET HEAD: 4 POS; 4000 rpm TURRET HEAD: 12+5+5 CONTROL UNIT: FANUC 0i TD BAR FEEDER: IEMCA mod. BOSS 545E/32LL WEIGHT: 4600 Kg OVERALL DIMENSIONS: 2770 x 1345 x 1970 mm ACCESSORIES: SWARF CONVEYOR ; PIECE CONVEYOR

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS HORIZONTAL MACHINING CENTRE WITH MULTI-PALLET SYSTEM X-AXIS TRAVEL: 2000 mm Y-AXIS TRAVEL: 1600 mm Z-AXIS TRAVEL: 1800 mm SPINDLE: 4000 rpm; 37 kW; 794 Nm; BIG PLUS ISO 50 PALLET: N.4 ; 1000X1000 mm MAX ADMITTED LOAD: 3000 Kg MAX MACHINABLE PIECE DIMENSIONS: ø 1550 mm HIGH PRESSURE COOLANT: 30 Bar TOOL MAGAZINE: CHAIN-TYPE ; 306 POS MAX TOOL WEIGHT: 35 Kg Itodpei En Azofx Afisn HEAD: AUTOMATIC 1° ROTARY HEAD CONTROL UNIT: SIEMENS 840 D ACCESSORIES: SWARF CONVEYOR ; LINEAR SCALES ; RENISHAW TOUCH PROBE

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 1200 mm Ijdpfx Afoh Hfrneietn Z-AXIS TRAVEL: 1250 mm SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE

Condition: ready for operation (used), - USED - BRIDGE-TYPE MILLING MACHINE WITH MOBILE TABLE AND MOBILE CROSS BEAM LONGITUDINAL TRAVEL: 9000 mm TRANSVERSAL TRAVEL: 2950 mm VERTICAL TRAVEL: 1250+2200 mm RAPID FEEDS L-T-V: 3 - 3 - 2 m/min Itjdpfxoh Stzgs Afien TABLE SIZE: 2800 x 8000 (5000+3000) mm MAX ADMITTED LOAD: 64000 Kg SPINDLE: 20 - 600 rpm; 100 kW; 13000 Nm; ISO 60 DISTANCE BETWEEN UPRIGHTS: 3200 mm DISTANCE SPINDLE NOSE-TABLE: 2806 mm OVERALL DIMENSIONS: 21000 x 7800 x 6650 mm ACCESSORIES: GEAR BOX NOTE: No 1 90° HEAD; No 1 REDUCED 90° HEAD; No 1 VERTICAL EXTENSION; No1 TILTING HEAD; 3-STEPS GEAR BOX

Year of construction: 2016, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 6000 mm TRANSVERSAL TRAVEL: 1500 mm Itedpfx Asxpkxtefion VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min SPINDLE: 1180 Nm; 42 kW; 337- 5000 rpm WORKTABLE: 300 x 2500 x 7000 mm HEAD: ISO 50 ; MILLESIMAL POSITIONING ; A/B AXIS AUTOMATIC TOOL MAGAZINE: 12 POS; PICK-UP CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 20 Bar NOTE: AUTOMATIC HEAD CHANGE; COMPRESSED AIR INSIDE THE TOOL; RTCP; AUTOCAL SOFTWARE FOR AUTOMATIC CALIBRATION