Used Stand Pipe Valve for sale (16,170)

Year of construction: 2008, condition: good (used), Manufacturer: WORTELBOER HOLLAND Type: PBM 24 Year of construction: 2008 Clamping area 215 - 620 mm Rotation area 170 - 620 mm Stroke 290 mm Max. wall thicknesses 1 cycle 40 mm Rotation speed 25, 38, 50 min TRB Roller conveyor 7000 mm with V Type Gedpfx Aorr Ungenkjub Construction in height adjustable Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 3200 mm width 2200 mm height 1700 mm weight 12000 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2014, Technical Description: Cutting Height: Vertical: 2,150 mm, Horizontal: 50–2,000 mm Cutting Length: 4,300 mm Cutting Depth: 80 mm (with clamps: 55 mm) Saw Blade Protrusion Behind Workpiece: approx. 15 mm Saw Blade: Diameter 303 mm, Bore 30 mm, Z=60 Alternate Top Bevel Saw Blade Rotation: 4,200 rpm Motor Power: 4 kW (5.5 HP) Required Air Pressure: 6 bar Gjdpfxsy Rphxe Ankoub Material Support Rollers: 20 ball-bearing rollers + 2 infeed/outfeed rollers Panel Locking for horizontal cuts via pneumatic workpiece clamping system, controlled by a switch on the operator panel. Middle Support: 3 support elements for 3 m support, foldable individually by hand. Dimension Readout for: - Horizontal Cuts: by digital readout with zero reset (for strip cutting from top to bottom), by scale from 0–2,100 mm, and by strip stop from 75–730 mm - Vertical Cuts: by electronic digital display and scale from 0–1,300 mm Extraction Nozzles: 100 mm for the saw unit and 120 mm for the rear extraction ducts, positioned on the right side of the machine frame. Equipment Features: - ADVANCE clamping system, consisting of 2 pneumatic clamping jaws motor-driven on ball screw along vertical axes. The clamping jaws can be positioned to the upper edge of the panel via joystick. The jaws automatically detect and stop at the panel’s upper edge using a contact switch. After reaching, the jaws close and secure the panel. They support panels up to max. 150 kg. The jaws can lift the panel for lower edge trimming, then relocate it with the trimmed edge resting on the lower support (also detected by contact switch). The jaws can then be raised again or continue holding the panel during horizontal cutting to relieve the cut. This prevents the panel from dropping onto the saw blade after the horizontal cut! Standard distance between clamps is approx. 1,800 mm. Position: right side of the machine (other positions available at extra cost). Minimum strip height with Advance jaws: 400 mm. - Electropneumatic scoring system for chip-free saw cuts by double cutting with the main blade (no scoring width adjustment needed – always ready to use – user-friendly) - Torsion-resistant, freestanding machine frame. - Round rod guide for vertical and horizontal travel. - Pneumatically retractable slatted panel prevents contact between saw blade and rear wall slats (strip). A sensor detects slat position; the grid recoils pneumatically if the saw would hit a slat. - Extraction nozzle on the saw head for dust collection in front of the workpiece. - Extraction nozzles for 3 vertical extraction ducts for dust generated behind the workpiece. - Fine-adjustable flip stop for vertical cuts, guided on a 30 mm round bar. - Extension stop (eliminating the need to lift heavy panels from the lower rollers onto the middle support). - Fine adjustment for horizontal cuts via handwheel. - Foldable strip cutting stop with ball bearing sensor along upper panel edge, adjustable from 75–730 mm.

Condition: used, Pneumatic valves from GEA, Alfa Laval, and APV (10 pallets). Approximately 150–170 pieces. Two pallets with Alfa Laval valve control heads. One pallet with unused valves. Gsdpfx Aeyk Hlyenkeub

Condition: ready for operation (used), Deutronic DX 3000 / 3-CAN-60-DIV built-in power supply Condition: 1 Serial number: 92037202009 / Input: 400-500 V~ / 45-65Hz Output: 0-60 VDC 0-50 A, used, in good condition, 100% functional, scope of delivery as per photos Gusdpjy Rcktsfx Ankob

Condition: ready for operation (used), Siemens 6SC6000-0NA00 FGB control E Stand K SN HO.44745-BIL 36, used, minor signs of wear, 100% functional, scope of delivery as per photos Gujdpfx Anexagynjkjb

Condition: ready for operation (used), Deutronic DX 3000 / 3-CAN-60-DIV built-in power supply, condition: 1, serial number: 9122080016 / input: 400-500 V~ / 45-65Hz, output: 0-60 VDC, 0-50 A, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Gedpfx Asy Rckmonkeub

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, lifting height: 2,424 mm, fuel type: electric, mast type: simplex, construction height: 1,740 mm, drive type: Elektro, Stand-on forklift Mast type: Standard Gjdpfxsy Skafo Ankjub Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 24V Scale,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,067 h, load capacity: 1,400 kg, lifting height: 4,716 mm, free lift: 979 mm, fuel type: electric, mast type: triplex, construction height: 2,065 mm, drive type: Elektro, Pedestrian stacker Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Guodpfjy Si Uzex Ankob Battery Volt: 24V

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,708 h, load capacity: 1,400 kg, lifting height: 5,316 mm, free lift: 1,179 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, drive type: Elektro, Pedestrian stacker Gedey Si Uuspfx Ankoub Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V Initial stroke,

Condition: used, mileage: 177,016 km, power: 110 kW (149.56 HP), first registration: 03/2021, fuel type: diesel, empty load weight: 2,163 kg, maximum load weight: 837 kg, overall weight: 3,000 kg, wheelbase: 3,400 mm, next inspection (TÜV): 03/2027, fuel: diesel, fuel consumption (urban): 8.6 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.8 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 6, total length: 5,500 mm, loading space length: 2,150 mm, loading space width: 1,910 mm, Year of construction: 2021, construction height: 200 mm, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, electronic stability program (ESP), onboard computer, parking heater, soot filter, traction control, Special Equipment: Godpfx Ajy Ap Hrenkjub Audio navigation system Discover Media Streaming & Internet (touchscreen, USB), Light & Vision package, Comfort Package Plus, convex exterior mirrors on large brackets, Chassis: reinforced front axle load and stabilizers, 16", cruise control system (including speed limiter), illuminated glove compartment, heated rear window, fuel tank: 80 liters, multifunction display Plus, emergency call system, smoker package, tire pressure monitoring system, spare wheel with regular tires, heated windshield washer jets and washer fluid level indicator, front and rear mud flaps, driver and passenger seats heated in cab, side wall cladding (plywood), permitted gross vehicle weight 3.00 t, additional water heater with programmable auxiliary heater function. Further Equipment: Passenger airbag deactivatable, driver and passenger airbags, traction control (ASR), drive type: all-wheel drive, electrically adjustable and heated exterior mirrors, rubber flooring in cab, on-board tools, ASR deactivation switch, twin headlights, driver assistance system: brake assist (HBA), driver assistance system: multi-collision brake, laminated windshield, 2 foldable remote keys, lockable glove compartment, interior pollen filter, body/superstructure: standard double cab flatbed, headlight range adjustment, engine 2.0 L - 110 kW TDI, digital radio reception (DAB+), wheelbase 3400 mm, low emission according to Euro 6d-TEMP, cab seats: co-driver double bench with lockable storage compartment under the seat, cab seats: adjustable driver's seat, loading area: 1st row 3-seater bench (fixed), steel rims 6.5x16, engine stop/start system, lashing rings in load compartment, driver's side seat belt warning system, heat-insulating glazing, central locking with remote control and internal operation. Equipment details were determined using a VIN query; technical inaccuracies may occur.

Condition: used, Year of construction: 1998, Max. cutting width: 5300 mm; max. cutting height: 2200 mm; saw blade diameter: 300 mm; max. processing thickness: 80 mm; saw blade bore: 30 mm; lower support: fixed rollers; material support: closed wooden support; saw head tilting: manual; extraction: external extraction; saw beam locking: manual; approximate weight: 1500 kg; dimensions: 6300 x 1500 x 2900 mm; motor power: 5.5 kW. Storage location: Supplier Gujdpoy N Thtefx Ankeb

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Guodpfxof Epzns Ankeb Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev Guedpfxjy Sf Aze Ankjb • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: new, Year of construction: 2025, machine/vehicle number: CAT0DE88CN7C00926, fuel type: diesel, motor manufacturer: Caterpillar C4.4, General information Field of application: Construction Weights Empty weight: 1.141 kg Functional Generator capacity: 88 kVA Dimensions of cargo space: 229 x 113 x 148 cm CE mark: yes Other information Fuel consumption: 15.2 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 149 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery Guedpfjx Ib A Nex Ankjb - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2024, machine/vehicle number: CATDE715TXRZ00289, fuel type: diesel, motor manufacturer: Caterpillar C15, General information Field of application: Construction Weights Empty weight: 4.832 kg Functional Generator capacity: 715 kVA Dimensions of cargo space: 499 x 187 x 229 cm CE mark: yes Other information Fuel consumption: 108.1 Liter / Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 910 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy Gujdjxvk H Rjpfx Ankob - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: CAT0DE65CN7300532, fuel type: diesel, power: 52 kW (70.70 HP), motor manufacturer: Caterpillar C3.3, General information Field of application: Construction Weights Empty weight: 992 kg Functional Generator capacity: 65 kVA Dimensions of cargo space: 230 x 96 x 140 cm CE mark: yes Other information Fuel consumption: 11.3 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 103 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank Gusdeukm Ruepfx Anksb

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE550TRZ500433, fuel type: diesel, motor manufacturer: Caterpillar C13, General information Field of application: Construction Weights Empty weight: 3.886 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 477 x 163 x 236 cm CE mark: yes Other information Fuel consumption: 80.8 Liter / Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage II / Tier II Delivery terms: EXW Water tank volume: 721 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = Gujdpfx Asxvk Hwonksb - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE500JRZ400165, fuel type: diesel, motor manufacturer: Caterpillar C13, General information Field of application: Construction Weights Empty weight: 2.924 kg Functional Generator capacity: 500 kVA Dimensions of cargo space: 310 x 134 x 217 cm CE mark: yes Other information Fuel consumption: 72.7 Liter / Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage II / Tier II Delivery terms: EXW Water tank volume: 721 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank Godpfx Ajxvk Hksnkeub

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE450ERZE00231, fuel type: diesel, motor manufacturer: Caterpillar C13, General information Field of application: Construction Weights Empty weight: 3.754 kg Functional Generator capacity: 450 kVA Dimensions of cargo space: 477 x 163 x 236 cm CE mark: yes Other information Fuel consumption: 69 Liter / Hour at 75% Load Generator: Caterpillar A2955L41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 721 l Additional information Please contact Team DPX for more information = Additional options and accessories = Godewnwfyopfx Anksub - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE220CN7500245, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 1.933 kg Functional Generator capacity: 220 kVA Dimensions of cargo space: 332 x 113 x 167 cm CE mark: yes Other information Fuel consumption: 37.8 Liter per Hour at 75% Load Generator: Caterpillar A2637L41 Frequency: 50 Guedjx Nutwjpfx Ankeb Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 325 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Caterpillar DE220GC Generator Set specifically designed for stand-by duty.

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE150PN7F00113, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 1.902 kg Gujdpfxsx Nutkj Ankjb Functional Generator capacity: 150 kVA Dimensions of cargo space: 334 x 117 x 175 cm CE mark: yes Other information Fuel consumption: 24.8 Liter per Hour at 75% Load Generator: Caterpillar A2625L41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 325 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Caterpillar DE150GC Generator Set specifically designed for stand-by duty.

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE200TN7400697, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Guodpfsxq Uqcsx Anksb Empty weight: 1.931 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 335 x 117 x 175 cm CE mark: yes Other information Fuel consumption: 34.2 Liter per Hour at 75% Load Generator: Caterpillar A2635L41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 325 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE165EN7G00668, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 1.926 kg Functional Generator capacity: 165 kVA Dimensions of cargo space: 334 x 117 x 175 cm CE mark: yes Other information Fuel consumption: 27.2 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Gjdpfx Anowrwk Dekjub Water tank volume: 325 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE110VN7E00802, fuel type: diesel, motor manufacturer: Caterpillar C4.4, General information Field of application: Construction Weights Empty weight: 1.213 kg Functional Generator capacity: 110 kVA Dimensions of cargo space: 276 x 103 x 158 cm CE mark: yes Other information Fuel consumption: 18.4 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Gjdpfx Anev Sxzrekjub Water tank volume: 166 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Year of construction: 2004, condition: good (used), Support stand, assembly stand, steel stand, welding table, assembly table, work stand, heavy-duty support stand, mobile stand, support stand, trestle stand, support stands -Auxiliary stand: Steel stand with spring-loaded chassis -Height: 1910 mm -Load capacity: 15 tons distributed load -Number: 2 axle stands available Gjdsy N Dczopfx Ankeub -Price: for 2 pieces -Dimensions: 1310/1915/H1910 mm/piece -Weight: 263 kg/piece