Used Stainless Steel Round Bar for sale (38,787)

Condition: good (used), Double Sink Stainless steel Dimensions - 1800mm Long x 600mm Deep x 880mm High With bottom storage shelf Fpjdpfevz Dxzox Afion

Condition: good (used), functionality: fully functional, Used stainless steel auger for sale. This auger was used for dipping diced potato in a preservative before packing but not limited to this. Fpsdpfxjvkxime Afisn

Condition: used, Used Stainless Services Ltd approximately 1,370 litre 316L stainless steel vertical storage tank. Unit measures approximately 1200mm diameter x 770mm straight side. Unit has welded dished top and welded cone bottom heads. Internal rated 2.5 bar design pressure at 150 deg.c. Unit mounted on (4) legs. Specifications: Capacity: 361.9 gal Diameter: 3.94' Height: 2.53' Type Of Heads: welded dished top and welded cone bottom Vertical/Horizontal: vertical Type of stainless: 316L Fedpjxmt Avsfx Afiopn Legs/Lugs: 4

Condition: used, Winkworth PV1000 Jacketed Stainless Steel Tank Capacity 1000 Lts Complete with Winkworth mixer and ancillary equipment Fpjdjwq Sdispfx Afijn

Condition: used, Used Alfa Laval 316L stainless steel 3-effect plate evaporator system. Designed evaporation capacity approximately 28,000kg/hr. 1st & 2nd evaporator effects with rising film evaporators (AlfaVap Plate) model AlfaVAP 650-FL) utilising MVR (Mechanical Vapor Recompressor). 3rd effect (Finisher) with forced circulation (AlfaFlash MX25-MFMS) utilizing hot water as a heating medium. System includes (6) plate heat exchangers, (3) cyclone separator vessels, vacuum pump, various circulation pumps, instrumentation, valves and framework. Fpsdpfx Ajw T Rhwjfijn

Condition: used, Used Winkworth model ZX500-6 stainless steel jacketed z-blade mixer / extruder. Approximate working capacity 500 litre with total capacity 778 litre (product dependent). 304 stainless steel chamber measures approximately 1,090mm long x 956mm wide x 735mm deep. Unit has vacuum rated domed hood/lid. 304 stainless steel external jacket. Each Z-blade driven by 30kw motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Fpjdpexmuq Iefx Afien

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Fedpfsxmuqusx Afiepn Specifications: Power: 11 kW

Condition: used, Used Becomix model RW30CD stainless steel process vessel. Approximate 2-25 litre working capacity (product dependant). Unit has clamped dished top head and welded conical bottom head. Internal rated 29psi (2 bar) maximum allowable working pressure at 273 deg.f. (133 deg.c.) and 15psi (FV) maximum allowable external working pressure at 41 / 273 deg.f. (5 / 133 deg.c.) Minimum design metal temperature 41 deg.f. (5 deg.c.) at 29psi (2 bar). External stainless steel jacket rated 58 psi (4 bar) maximum allowable working pressure at 41 Deg.F. (5 deg.c.) to 306 deg.f. (152 deg.c.) Unit has top mounted agitator with electric drive/gearbox and bottom entry homogenizer with electric drive. Unit mounted in a stainless steel mobile frame. Click on the link below to see a video of the machine running. Fodpexmuqnsfx Afiepn

Condition: used, Used SPX Flow Technology APV model R15-18.56 stainless steel homogenizer. Has three piece valve housing. Maximum capacity 400 l/h with maximum pressure 800 bar. Mounted on stainless steel mobile skid. Unit includes process control skid. Fjdpfx Aexmuqhsfiepn

Condition: used, Used Brogtec (CH) model MH-8 stainless steel homogenizing mixer. Mixer has total volume of mixing chamber 10 l and working volume about 8 l. Tank is rising and lowering manually. Has bottom discharge outlet and possibility to discharge by manual tilt. Working pressure range - mixing chamber from vacuum till 29 PSI (2 bar). Heating jacket up to 43 PSI (3 bar). Working temperature range - mixing chamber from 32 - 250 F (-1 to 120 C). Heating jacket - from 89 - 250 F (31 - 120 C). Mixer is equipped with anchor with wall scrappers type agitator, vertical ribbon agitator and hi-speed homogenizing mill. Anchor and ribbon agitators are driven by gearbox and el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotation of vertical ribbon agitator is about 124 rpm, working rotation of anchor agitator - up to 62 rpm. Hi-speed homogenizing mill is belt driven by el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotations from 2755 up to 5379 rpm. Mixer is equipped with local vaccum pump and heating device by GMK type teco 60. Machine has local control panel. Fpedpfxjxmt N Ae Afijn

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Fjdpsxmt Hzjfx Afijpn

Condition: used, Used Winkworth model PV3000 approximately 3,000 litre stainless steel vertical mixing vessel. Unit has a welded flat top and welded conical bottom. Unit measures approximately 1650mm diameter x 1800mm straight side. Unit has a top entry stainless steel offset (3) deck 3-blade pitched agitator driven by a 3kW Lightnin motor with gearbox. Unit is mounted on (3) legs. Specifications: Capacity: 793.7 gal Diameter: 5.41' Height: 5.9' Fpsdpjxmt Husfx Afijn Type Of Heads: welded flat top and welded conical bottom Vertical/Horizontal: vertical Type of stainless: stainless steel Legs/Lugs: 3

Condition: used, Used Breddo model LORWW 100 US gallon (378 litre) capacity stainless steel vertical jacketed mixing vessel/Likwifier. Has approximately 1200mm diameter X 470mm deep tank with welded cone bottom and flat open top with hinged lids. Has approximately 250mm diameter bottom entry general purpose impeller belt driven by 30 hp 415 volt 3/50 1500 rpm motor with Allen-Bradley Powerflex 70 inverter drive. Also includes baffle bar. External jacket rated 125 psi (8.6 bar) working pressure at -20/+400 degf (-29/204 degc). Mounted on stainless steel mobile base with diaphragm pump local controls. Fpsdpfx Afexmt Hnsion Specifications: Capacity: 100 gal Diameter: 3.94' Height: 1.54' Vertical/Horizontal: Vertical Type of stainless: Stainless Steel Legs/Lugs: Mounted on stainless steel mobile base

Condition: used, Reportedly unused PalPharma Handling approximately 2,100 litre working capacity 316L stainless steel IBC. Unit measures 1,000mm long x 1,200mm wide x 1,500mm straight side with a 900mm conical bottom height. Unit includes top charge and bottom discharge valves. Dimensions: 39.3701 x 47.244 x 94.488 Fsdpfx Aoxmt Hhjfiopn

Condition: used, Used Bibby approximately 300 litre capacity 316 stainless steel vertical mixing vessel. Unit has welded dished top and bottom heads. Internal rated 3.48 bar/full vacuum design pressure at 100 deg.c. Unit has top entry off-site stainless steel agitator driven by Lightnin model LS25A air operated drive. Unit is mounted on (4) stainless steel legs. Fsdsxmt E Depfx Afijpn Specifications: Capacity: 79.2 gal Type Of Heads: Welded dished top and bottom heads Vertical/Horizontal: Vertical Type of stainless: 316 Legs/Lugs: 4

Condition: used, Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximarely 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve. Specifications: Capacity: 14.1 ft³ Fodexmt Ekepfx Afiepn Material of construction: 316 stainless steel Width: 22.83" Horsepower: 7.4 hp Length: 66.14" Jacket: No

Condition: used, Used Matcon approximately 1,000 litre stainless steel IBC. Unit measures approximately 1,000mm long x 1,000mm wide x 500mm deep with a 500mm deep conical bottom. Unit mounted on forkliftable base. Includes internal discharge cone. Fodexmt Edspfx Afijpn Specifications: Material Grade: stainless steel Dimensions: 1000mm x 1000mm x 500mm

Condition: used, Used Moeschle approximately 4,900 litre total capacity 304 stainless steel vertical storage vessel. Unit measures approximately 1,000mm straight side x 2,200mm diameter. Unit has welded dished top and bottom heads. Unit mounted on (3) legs. Specifications: Capacity: 1,295 gal Diameter: 7.22' Height: 3.28' Type Of Heads: welded dished top and bottom Vertical/Horizontal: vertical Fpsdpjxmt D Tofx Afion Type of stainless: 304 Legs/Lugs: 3

Condition: used, Used approximately 42,000 litre capacity 304L stainless steel vertical storage vessel. Unit measures approximately 2,900mm diameter x 6,400mm straight side. Unit has welded flat bottom and welded conical top heads. Unit includes internal access ladder fixed to side wall. Specifications: Capacity: 11,103 gal Fpedpfx Ajw T Rchofien Diameter: 9.5' Height: 20.9' Type Of Heads: welded conical top Vertical/Horizontal: vertical Type of stainless: 304L

Condition: used, Comprehensively tested, used Kemutec 316 stainless steel ribbon blender. Manufacturer: Kemutec Material: 316 Stainless Steel Capacity: Approximately 50 Litre Capacity Mixing Trough: Approximately 540mm x 320mm x 400mm Discharge Type: Manual Plug Valve Type Of Mixer: Single Interrupted Ribbon Motor: 2.3 kW Also includes: Local controls, stainless steel hinged lid with clamps and perspex cover and stainless steel mobile frame. Fodpsxmt D Hjfx Afiepn Click on the link below to see a video of the machine running. Specifications: Capacity: 1.8 ft³ Material of construction: 316 Stainless Steel Horsepower: 3.1 hp Dimensions: 21.26 x 12.60 x 15.75

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Fpodpexmt Dmsfx Afien Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2016 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: used, Comprehensively tested, used Winkworth reportedly model GU660 stainless steel ribbon blender. Fpjdpsxmt Daefx Afisn Manufacturer: Winkworth Material: Stainless steel Capacity: 660 litre (product dependent) Mixing trough: 1,750mm long x 700mm wide x 790mm deep Discharge Type: air operated discharge value Type Of Blades: single interupted ribbon Motor: 7.5kw, 1450rpm, 415volt, 3/50 motor through Opperman type HTM7 gearbox rated 38.2/1 reduction rated, 37rpm output. Also includes: Hinged lid with clamps. -Control panel with castell key interlock. -Mild steel mobile base. A video of this mixer is available below. Specifications: Capacity: 23.3 ft³ Material of construction: Stainless steel Width: 27.56" Horsepower: 10 hp Length: 68.9" Dimensions: 68.90in x 27.56in x 31.10in

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Fsdpoxmt A Nefx Afispn Click on the link below to see a video of the machine running.

Condition: used, Used Becomix type MV-2000 stainless steel premix vacuum processing vessel. Approximately 2,000 litre capacity. Has welded dished top and welded dished bottom heads. Internal rated 2 bar / full vacuum design pressure at 134 deg.c. External jacket rated 4 bar design pressure at 152 deg.c. Unit has bottom entry agitator driven by a 5.5kW 980 RPM 3/415V 50Hz electric motor. Unit is mounted on stainless steel legs. Click on the link below to see a video of the machine running. Specifications: Capacity: 528 gal Material of construction: stainless steel Type Of Heads: welded dished top and welded dished bottom Internal Pressure: 29 PSI Jacket Pressure: 58 PSI Fedpsxmt A Aefx Afiepn Internal Temperature: 273°F Type of stainless: stainless steel Legs/Lugs: Yes

Condition: used, Used Sielmann approximately 25,000 litre 304 stainless steel vertical storage vessel. Unit measures approximately 2,600mm diameter x 4,700mm straight side. Unit has welded dished top and bottom heads. Unit includes stainless steel internal heating coil. Unit is mounted on 4 legs. Specifications: Capacity: 6,604.3 gal Diameter: 8.53' Height: 15.42' Type Of Heads: welded dished top and bottom Fpedpfxoxmt Apj Afisn Vertical/Horizontal: vertical Type of stainless: 304 Legs/Lugs: 4 legs