Used Stack Cutting Machine for sale (86,216)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 57,948 h, machine/vehicle number: CO2-332-7479-03.ncp, laser power: 4,400 W, sheet thickness aluminum (max.): 25 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The 4020 from Bystronic is in top condition! - Optimum accessibility on the entire long side - Easy and quick loading of remnant sheets, access without risk of collision -> ideal for express orders in between - Optimum design of the rotary axis, quick and easy to set up - Optional remote diagnosis - Large 170 mm Z-axis cup enables the processing of high volume sheets - Low operator effort and therefore higher productivity 1.2 The drive system - Gearless direct drive with low speed and high torque - Good acceleration values - Long service life due to low bearing load - Enclosed and protected drives 1.3 The cutting heads - Two focal lengths cover the entire material spectrum - Quick cutting head change without tools within seconds - The CLS unit integrated in the Z-axis monitors the cutting edge and prevents possible burn-through - Integrated capacitive scanning - CutControl for monitoring and controlling the cutting quality 1.4 Operation - Manual control unit for time-saving set-up and adjustment work - Simple restarting and contour catching by starting with the hand-held control unit 1.5 The ByVision control system - Adjustments can be made directly on the operating terminal - Activating, deactivating and automatically setting micro bars without programming software - Nesting of individual parts from existing nesting plans - Low process costs, less non-productive time, higher productivity - Micro welding points for holding small or long thin plates 1.6 The laser - Up to 6kW laser power (depending on the laser source selected) - Very low power consumption thanks to optimized efficiency and the latest technologies - The precise and fast control of the optical power enables very short piercing times in conjunction with maximum process reliability and the use of highly efficient cutting technologies - The OCS unit (Bylaser 4400/Bylaser 5200 ARC/ByLaser 6000) monitors the output window, the EMS-Elnhelt (ByLaser 6000) the end mirror, both prevent possible burn-through of the optical elements - High performance benefit Ijdpsudvh Uofx Affetr - Flexible layout planning thanks to separate installation Subject to prior sale! Specifications without guarantee!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, laser power: 8,000 W, year of last overhaul: 2024, Equipment: cooling unit, documentation/manual, safety light barrier, MicroStep demonstration system: Laser all-rounder MSF Pro 3001.15LtkBr Machine data Manufacturer: MicroStep Model: MSF Pro 3001.15LtkBr Year of manufacture: 2020 Technology: Laser, Drilling Condition: Demonstration machine; currently in operation Working area: 3,000 x 1,500 mm Location: Dorsten, Germany Technical equipment - Laser rotator for weld seam preparation with EX-TRABEAM laser cutting head - High-power fiber laser source nLight® Corona™ with 8.0 kW cutting power (year of manufacture 2020) - Fully automatic turret drilling spindle for drill holes up to 15 mm in diameter and threads up to M16 - Automatic shuttle table - Automatic cleaning and calibration station - MicroStep iMSNC® machine control system - MicroStep CAM software: Asper Basic® + Asper Nesting® + Asper BevelCut® - TEKA AirCube filter system with 5.5 kW (new model available on request) - Linear guides, driven on both sides in X- and Y-axis - Max. Travel speeds up to 130,000 mm/min - Positioning accuracy ± 0.03 mm The system is available immediately. A viewing of the system is possible at any time by appointment and is expressly desired. Itodpsra Dygefx Affjr Changes and errors excepted.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser hours: 6,900 h, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, power: 10 kW (13.60 HP), year of last overhaul: 2024, working range: 4,020 mm, Equipment: cooling unit, documentation/manual, safety light barrier, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • Powerful Donaldson DFPRO 6 filter system with 7.5 kW Technical specifications: Itsdpfx Aovw Tdlsffor Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Transverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Acceleration Z-axis: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% EX-TRABEAM® Pro laser cutting head Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical specifications: Drilling from/to: Ø 4 mm - Ø 30 mm Threading from/to: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic drilling tool measurement Pneumatic hold-down device Brush For removing drilling chips Donaldson® DFPRO 6 Cyclopeel filter system Fan power: 7.5 kW Flow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With witt Gas Mixer Machine has always been operated under a maintenance and support contract

Condition: used, Year of construction: 2010, Year of manufacture: 2010 Isdpfevvvnqox Affetr Plasma source Kjellberg PA-S45W Dimensions of work surface: 1,500 3,000 mm Plasma burners 2 pieces

Condition: repair required (used), functionality: limited functionality, Year of construction: 2005, operating hours: 54,057 h, Finnpower L6-BL Machine valt uit na 3-4 uur werken. Heeft een controle/revisie nodig. Vermoedelijk verliesstroom op een kabel. Itsdpev R Dwiofx Affor Bouwjaar:         2005 Laserbron:     54.057 u Machine:      66.724 u Demontage, laden en lossen is ten laste van de koper.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Polar N 78 ECO Year: 2014 Counter: only 10,694 total cuts Cutting width: 78 cm Feeding depth: 78 cm Knife speed: 45 cycles/min Equipment: 5.5-inch monochrome display Polar OptiKnife for faster knife change Polar Positioning-System DPS for highest cutting accuracy Programs Chromed air table Ijdsxiwcrjpfx Affotr Side tables Light barrier 2x extra blades

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Cutting Machine MOHR D 80 ECO (POLAR 80) Year of manufacture: 2023, Total counter: only 119,604 cuts Condition: very good. Specifications: Cutting width: 800 mm Feed depth: 800 mm Max. clamp opening: 100 mm Adjustable clamp pressure from 180 to 2700 daN Cutting height/clamp opening: 100 mm Power requirement: 4 kW Dimensions (L x W x H): 155 x 197 x 150 cm Stainless steel table with air jets, cell construction Itjdpfewp H Rbsx Affer Robust, programmable cutter MOHR (Polar) 80 ECO 80 cm, equipped with hydraulic drive and 5.5" monochrome display, designed for single-shift operation—ideal for digital printing environments. Operation via ergonomically positioned control panel with 5.5" monochrome display and additional membrane keypad. Recurring cutting sequences can be stored (memory capacity: 198 programs) and modified at any time. Cutting programs can be created manually or intuitively menu-driven using block programming.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 11,070 h, General Data Machine weight 12000 kg Measurements height 2565 mm Dimensions Machine Length 11000 mm Main Drive Number of axis 3 This 3-axis Bystronic BySprint Fiber 3015 was manufactured in 2016, designed for precision fiber laser cutting. It handles a nominal sheet size of 3000 x 1500 mm and supports a maximum workpiece weight of 890 kg. The machine dimensions are 11,000 mm in length, 6,050 mm in width, and 2,565 mm in height. If you are looking to get high-quality cutting capabilities consider the Bystronic BySprint Fiber 3015 machine we have for sale. Contact us for more information. Application Types Cutting Iedpfjx Hbk Djx Affetr

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 6390312, Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife Iodpfx Afexugv Sofotr

Condition: excellent (used), functionality: fully functional, Schon 6100B CE Bridge-Type Die Cutting Press Hydraulic press with front/rear traverse beam designed for cutting various materials from a die (leather, foam, cork, etc.) Very fast and powerful – the machine operates maintenance-free (operator only needs to manage the tooling and material). Technical specifications: - Pressing force: 50T - Working area: 100cm x 65cm - Max stroke: 150mm - Max clearance between ram and table: 177mm Machine equipped with a user-friendly, trilingual touchscreen panel (Polish, English, German) featuring: - Tool zero-point reference Isdpfsx Il Hljx Affjtr - Force adjustment - Table height adjustment after cutting - Automatic/manual operation modes - Cycle counter - Machine error diagnostics Machine in excellent technical condition after comprehensive servicing, including: - Hydraulic and mechanical systems inspection - Oil replacement - Completely redesigned and upgraded electrical system with safety barriers, safety relays, and PLC control panel Price on request. Assistance with transport organization available.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 2,200 mm, total length: 3,100 mm, total width: 2,200 mm, power: 3 kW (4.08 HP), We offer this very good Blackman and White Versatech Cutting Machine, year of construction 2017. 2.2 x 3.1mtr conveyorised bed, with on board 3kw water cooled router and drag knife, with iCut camera registration system. Can be seen fully working and tested in Leicester UK. Itodpjx Ik Dcjfx Affer Price is ex works, we can put you in touch with the engineer who will provide a seperate and direct cost to move the machine. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Philipp high-performance cross-cutting and ripping machine or double cross-cutting system for recutting untrimmed models. The system measures, cross-cuts, and trims models after a log band saw or similar. The exact scope of delivery of the mechanization is to be agreed upon. The system is still in operation and can be inspected. Disassembly must be completed approximately by the end of September 2025. Special price ex-site. workpiece length: 1,500 – 5,000 mm workpiece width: 200 – 1,000 mm Ijdpfx Afew Nnwhsfjtr workpiece height: 45 – 160 mm

Year of construction: 2014, condition: ready for operation (used), A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible. Itsdpfxex Ih D He Affjr

Condition: ready for operation (used), Year of construction: 2018, This KERF RUM 2500P plasma cutting machine was manufactured in 2018. It features a large cutting area of 15000mm x 2000mm and is equipped with two bridges, each with 275amp plasma. Full history from the manufacturer is available. Contact us for more information about this machine. Application Types Cutting Itjdpfx Asx Hbkqeffer

Condition: new, Year of construction: 2026, Brand new installation from one of the world’s largest manufacturers, Dardi International / Flying Bridge design, 3x2 m cutting area, 2-D, linear guides with ball screw drives on all three axes, Yaskawa motors with controllers. Delivery time approx. 6–8 weeks, available directly in our showroom in Elsenfeld, with the following equipment: Iedpfx Ajx Ig Sioffjtr Many machines of the same type can be inspected in advance in Benelux, Switzerland, Germany, etc. Please contact us. -- Other sizes available on request ---- Machine - 2x3m cutting area with stainless steel tank and wave-shaped replaceable steel supports - ESA PC control with WIN 11 - IGEMS 2-D CAD/CAM programming system including automatic nesting to minimize material waste - 1 cutting head, 2-D version - Handwheel - High-pressure supply via rotary union - Automatic central lubrication - High-pressure supply via profile stand and shut-off valve - Allfi® abrasive feed system 1.3 t fully automatic - Allfi® abrasive metering system 2.0, stepless adjustment without pneumatics - KEYENCE light curtains for CE compliance - IGEMS and operator training as well as on-site installation available at extra cost Price ex works Elsenfeld. We are the European distributor for Dardi International with 26 years of experience in high-pressure waterjet systems. At extra cost: - High-pressure pump BFT Ecotron 40.37+ - Aqualon High Pressure Pump AQRO S50c 37 KW / 3.8 l/min Optional: Manual tilting head available at extra cost – see pictures.

Condition: excellent (used), Year of construction: 2000, Polar Mohr 78 ES Year of manufacture: 2000 Itjdpex Ic A Rsfx Affsr Program, air table, side tables left + right 2 knives, complete documentation, tools

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Iedpfehwhfqox Affetr Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm Iedpfx Aoxu U Ddsffstr 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning table with sectional exhaust system 6,000 x 3,000 mm "MasterCut" plasma rotator with fully automatic support ACTG automatic calibration unit for the beveling aggregate Kemper exhaust system 8000 (year 10/2015) Asper Basic 2D programming software + Asper BevelCut programming for bevel cuts Other technical data: MicroStep machine control with MMI console and 24" touchscreen iMSNC module expert system iMSNC module for automatic calibration of mechanical probing iMSNC module assistant for loading CNC programs LCD operating unit on the gantry Laser pointer with automatic offset transfer USB 3.0 interface for storage device MicroStep RemoteDiagnostics remote maintenance module Grate cover in the burning table Reinforced version of the burning table Connection of fine plasma source to CNC control Control for automatic gas console Electrical and mechanical torch height sensing LED signal tower on the gantry bridge (2 colors) Tactile shutdown device for guide rails Light barrier safety (collision protection) on gantry bridge via emergency stop Smart Z Movement ACTG Calibration Report Oxy-fuel support fully automatic Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection

Condition: new, Year of construction: 2025, functionality: fully functional, HPM AUTOMATIC PAPER CUTTING (GUILLOTINE) MACHINE • TYPE : S22 • SIZE : 115 CM • YEAR : 2024 (BRAND NEW) (1 year parts and services warranty) DETAILS : 22” Large full touch LCD screen. Fully automatic paper cutting function. Program storage capacity of up to 300 programs. 90,000 motion storage capacity. Maximum trench speed 36m/min. Cutting speed: 42-45 pcs/min Trench precision 0.01mm. Fully automatic paper cutting function. Eight language options. Measurement and blade movements can be seen on the screen. Metric system options. Data transfer via USB and programming and adjustment by PC. New modern design. It has many security measures. German security photocells. German hydraulic system. Italian oil pump. Iodpsvm A Ufofx Affstr Panasonic servomotor. Siemens PLC. Italian balance valve.

Condition: ready for operation (used), Year of construction: 2020, This GEPELEKTRO Phantom CNC was manufactured in 2020. It features a large working area with table dimensions of 12,000 × 3,000 mm and is equipped with a Lincoln Electric Burny Phantom II controller. It can handle flame cutting up to 300 mm steel and plasma cutting up to 50 mm steel. The machine includes a complete extraction system and Messer OmniWin 2019 software. Contact us for more information about this machine. Itodpfx Aex E Edfeffor Application Types Cutting

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (bevel unit) with oxy-fuel torch Manufacturer: Zinser Model: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Ijdpfx Aow Rpvboffstr Runway length: 11 m Cutting table with oscillating conveyor, including extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas console incl. automatically rotating plasma bevel unit Bevel System 2015/350 1 oxy-fuel torch Filtration unit Downflow 3DFP9-SP Power: 9 kW Laser diode 161225ä

Year of construction: 2015, condition: excellent (used), functionality: fully functional, YAWA DIE-CUTTING MACHINE (STRIPPING UNIT) • TYPE : MW1050YA • SIZE : 75 x 105 cm. • YEAR : 2015 : DETAILS: AUTOMATIC DIE CUTTER WITH STRIPPING Max Sheet Size 750mm x 1050mm Min Sheet Size 370mm x 450mm Max Pressure 250 x 10(4) N (250 ton) Cardboard 157-2000g/m(2) Paper 100g/m(2) Max Speed 5,000 sheets per hour Ijdevm A R Tjpfx Affetr Very Good Condition Immediate Delivery

Year of construction: 2010, operating hours: 27,928 h, condition: ready for operation (used), This 3-axis TRUMPF TruLaser 5030 + LiftMaster + Stopa was manufactured in 2010. It features a 7000-watt CO2 resonator and handles a maximum sheet size of 3000x1500mm. The system includes a LiftMaster and a Stopa storage system with 85 pallets and a 255-ton capacity. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 machine we have for sale. Contact us for more information. Itedex E Ed Eopfx Affer Application Types Cutting

Year of construction: 1973, condition: good (used), functionality: fully functional, BOBST AUTOMATIC DIE-CUTTING MACHINE • TYPE : SP 1260 EGC • SIZE : 92 x 126 cm • YEAR : 1973 Itsdpfjvy Thvox Affor • LOCATION : TÜRKIYE DETAILS: With chases and frames In a good condition Can be seen in our warehouse in Istanbul Available immediately

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,197 h, This 3-axis TRUMPF TruLaser 2030 was manufactured in 2008. It features a TruCoax3200 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 2030 machine we have for sale. Contact us for more information. Application Types Cutting Itodpfxsx E Eb De Affsr