Used St Printing Systems for sale (49,620)

Condition: used, Electronics module -Isra Vision Systems AG: PCspork v1 1 -Dimensions: 127/153/H22 mm Hodpfx Agedkzvzsmjnn -Weight: 0.13 kg

Condition: used, Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems Hnjdpfoda Nyyjx Agmen -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/500/H266 mm -Weight: 54 kg

Condition: used, Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems MAINS SUPPLY -Control comes from a marking laser Hnedpfx Agoda Ny Aomon -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/530/H220 mm -Weight: 15 kg

Condition: used, Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: HAAS LASER -Control comes from a marking laser SLS Spectron Laser Systems Hnsdpfjda Ny Eox Agmsn -Type: Handling Gretag Laser 6211 -Q-BW-Driver: 68.11.40 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 530/500/H135 mm -Weight: 14 kg

Condition: good (used), Year of construction: 2012, Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor, digital interface balancer -Manufacturer: Balance Systems Balancing Unit B6 from CNC machining center Santenberg GTC S 2 -Terminal modules: Type 9SHVM2510NL000 (2 pieces) -Dimensions: 300/275/H130 mm -Weight: 5.3 kg Hedji Sdfxepfx Agmsnn

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Hjdpsw H Naasfx Agmenn Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 21220, overall weight: 8,600 kg, total width: 4,000 mm, total height: 3,100 mm, total length: 9,400 mm, load capacity: 180 kg, The system consists of the following components: - YASKAWA Positioner V2-500D3 (Year of manufacture 2022, 466843-1-1) - LASO WP-SLK welding cell - YASKAWA GP180 industrial robot (Year of manufacture 2022, Serial no.: 6V22Y2842450001) - NIMAK multiCONTROL control cabinet with Bosch Rexroth PRC7300 (Year of manufacture 2023, Serial no.: 7261404217680) Hedpoyft Evjfx Agmenn - RSP tool changer system - NIMAK spot welding gun LRN 300-650-R54-175-150-P2U-WR (Year of manufacture 2023, Machine no.: 2212–2129 N) - NIMAK spot welding gun CRN 300-650-R54-200-P2U-WL (Year of manufacture 2023, Machine no.: 2212–2128 N) - Weld gun cleaning station TECHNICAL DETAILS Positioner control: LASO industrial PC / Siemens S7 Payload Yaskawa GP 180: 180 kg Net weight Yaskawa GP 180: 1,020 kg Yaskawa GP 180 controller: YRC1000 Yaskawa GP 180 teach pendant: +RM1 Rotary brush cleaning station: 2 pcs. 180 x 150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,400 x 4,000 x 3,100 mm Total weight: 8,600 kg Type of input power: Alternating current (AC) Input voltage: 400 V Rated power: 138 kVA at 100% duty cycle Rated voltage: 400 V / 3 Ph / 50 Hz Cooling type: Water EQUIPMENT Servo rotary axis Swivel unit Penlink rotary unit LASO industrial PC / Siemens S7 controller Integrated pneumatic, coolant, and signal feedthroughs Safety enclosure

Condition: good (used), Converter module -Type: S 909 -Number: 2x module converters available -Price: per piece -Weight: 6.3 kg Hnodpfx Aob A Hv Segmon

Condition: good (used), Letterpress printing press, foot operated Made in Germany Fully original machine. A brilliant looking exhibit to put in a company lobby. A manually added piston. Rollers Format of the pressure 35x24cm Hnjdpevac S Defx Agmon

Condition: good (used), 3D Systems Type: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-performance SLA Printer Machine has been regularly maintained Operating hours: 18,700 (as of 18.04.2023) Not operated after 18.04.2023 Note: Annual servicing carried out up to dismantling For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with the latest printhead technology and is suitable for high-precision components and industrial applications (e.g. automotive, aerospace, medical technology). Additional features: - Automatic material replenishment system and pre-assembled material supply module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Touchscreen operation on the device (Print3D Pro™) - Status/signal light module, central user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Technical Data: - Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) - Maximum build volume: approx. 650 × 750 × 550 mm - Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm Hedjxam Ifjpfx Agmenn - Weight: approx. 907 kg - Resolution: up to 0.00127 mm (laser spot size), 4000 DPI - Accuracy: ± 0.025–0.05 mm per inch - Materials: Wide range of Accura resins (tough, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phase: Single-phase - Fuse: 30 A - Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) Hnjdjnkalgjpfx Agmon We are happy to answer any further questions you may have over the phone.

Condition: used, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Incl. PC, software & technical documentation For sale is a professional battery test system, consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideally suited for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: - Manufacturer: Keysight / Scienlab - Model: SL1001A - Year of manufacture: 2020 - Voltage / Current / Power: 80 V / 600 A / 24 kW - Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m - Weight: approx. 700 kg - Function: Charging, discharging, and cycling of battery modules - Condition: Very well maintained, laboratory use only Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: - Manufacturer: Angelantoni Industrie S.r.l., Italy - Model: DM500 C 10 ESS SPEEDY BT SP - Year of manufacture: 2019 - Weight: approx. 1,225 kg - Temperature range: -70 °C ... +180 °C - Humidity range: 10 ... 98 % rH - Refrigerants: R449A + R23 - Pressure ranges (PS Hi/Lo): 28 bar / 8 bar - Wi-Fi integrated - CE certification present - Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m - Function: Temperature and humidity testing, ESS (Environmental Stress Screening) - Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A - Max. power consumption: 32.5 kW Monitoring / Sampling Unit: - Dimensions: 0.6 × 0.5 × 0.2 m - Measured variables: Cell voltages, current, temperature - Interfaces: CAN, Ethernet - Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation: - Industrial PC with control and measurement software - Enables automated test runs, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifespan analysis of battery modules (e.g., Li-ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation for temperature and humidity - Research, industrial, and university laboratories Hnedpfx Asxuqk Hogmon Important Note: "The table shown in the photos is not included in the sale." Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring/Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see image) (Specifications and data are subject to change and error!) For any further questions, we are happy to assist you by phone.

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! Hodpfxjx Da Awo Agmsnn For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), This machine was filling capsules and tablets into small tubs. The whole line is also available. Hnodpfexm S Hmox Agmen Bottles are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Hnedpfxewhvq Is Agmsn Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. Hsdpfx Agjwqcrqemonn - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Drying Centrifuge Model ERFOR® CR8 Component device for recycling washing lines ♻️ ♻️ ♻️ The machine is designed for drying plastics—both soft and hard—including: films such as LLDPE, LDPE, HDPE, PP, PVC, PS, PA, post-agricultural films, agro-fibre, shredded big bags, PP sacks, fishing nets, peat packaging, and many more. Hjdpfx Ageuql Rtomjnn Drying centrifuges Model - CR8 55/75 Motor power [kW] - 55/75 kW Film drying capacity [kg/h] - 1500/2000 Dimensions (L*W*H) (mm): 1970*2800*2060 / 2100*3150*1900 Ground material drying capacity [kg/h] - 5000 Our offer also includes: Complete plastic recycling systems DWFS® washing lines Granulation and extrusion lines For more information, please visit our website.

Condition: new, Year of construction: 2024, functionality: fully functional, The SR 8 screw compactor from Koltex is an advanced solution designed for drying film flakes and preparing them for the extrusion process. This innovative machine effectively reduces the moisture content of the material to around 5%, significantly impacting the quality of the final recycled product. Modular construction The machine can be customized to meet the individual needs and requirements of the customer, allowing it to be used to its optimum potential in a wide variety of applications. Reliability The use of renowned drive components with a high degree of efficiency reduces operating costs while extending service intervals. Hedpfxouqwzwo Agmjnn Intelligent machine operation Touch panel with intuitive interface for easy control and monitoring of the working process. Space-saving The press is designed to be compact, saving valuable space in the workplace. Capacity (LDPE film): 1500 KG/H Auger diameter: 500 mm Engine power: 45 kW Scraping power: 7.5 kW Feed size: 760x650 Overall dimensions: 6097x1833x2729 Weight: 6800 kg

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Hjdpfehg Rcxsx Agmonn

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Aseptic filler for drums Asepsystems with 2 heads 1" plug with homogenizer and sterilizer. Hedeq Rdhuopfx Agmenn

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Hnodovy Aipjpfx Agmen Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Washer for plastic cans and bags Brand: Boldt Systems Hnedowxy Hzspfx Agmen Model: W 400.4.3.1 Serial number: BW0 04 122 Year of manufacture: 2005 Steam heated Stainless steel mesh belt Belt width: (3x) 380 mm Overall dimensions: 6000 mm x 2100 mm x 2400 mm

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Hnjdpfew Inpnsx Agmen

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Hnedpexzuiaofx Agmen

Condition: used, This listing is for a Enviro Systems UVIC-750 Hnjdpfxsxzhu As Agmon