Used Spring Machine for sale (71,025)

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 66.0 kg range L-W-H 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw Gkedpfx Aoxabtijk Ueb - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Godpfxjxabkzs Ak Uskb Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Power Supply: 220V / 380V Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts Gjdpfx Aszkkayek Uskb are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 Gjdexaarqopfx Ak Ujkb - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass Gkjdpfjwwz Dljx Ak Ujb

Condition: good (used), Year of construction: 1988, functionality: fully functional, 1 x Drill bit grinding machine Godpfsz Agdxox Ak Uekb Wedevag WL 2 Year of manufacture: 1988 with integrated dust extraction DCE Type: ADT 12 Technical data: Working range: 2.5 - 20 mm Grinding wheel dimensions: 203 x 10 x 32 mm Point angle: 60 to 180° Rotational speed: 2,800 rpm Accessories: 13 x Clamping head 1 x Operating manual in German The machine can be inspected while powered on.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Gkjdpfx Aouc Sifek Uob Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Condition: used, Year of construction: 1997, functionality: fully functional, stack height: 1,000 mm, working width: 1,020 mm, For sale is a very well-maintained FK 102 S model from 1997, featuring pneumatic side guides, a dust removal calender, electronic overlap control, a film cutting device, an Achilles separator, and a Gemser stacker. Gksdpfxjz Ai Dno Ak Ueb The machine is suitable for both wet and thermal lamination. Minimum format: 250 x 360 mm Maximum format: 1020 x 1240 mm Material weight: 100-450 g/m²

Condition: repair required (used), Year of construction: 2008, operating hours: 29,835 h, functionality: not functional, machine/vehicle number: 2337752, Equipment: chip conveyor, The CNC machine is exhibiting the following error: program execution with two tool changes. Up to that point, it ran without any problems. Then, at one point, the second tool change was not performed; instead, the error message "tool changer home position missing" appeared. The auxiliary function and rescue function are not working. Instead, the following error messages appear: "tool holder not open," "tool holder not closed," "tool changer home position missing." After switching on and starting up, the spindle cannot rotate (without compressed air, it can be moved slightly, but it is very difficult to move). After consulting with DMG Mori, it is possible that the pneumatic cylinder used to hold the tool holder is defective, or the spindle itself. Here are the key specifications: Gksdpfx Akszx A Tbs Ujb DMG DMC 835 V, manufactured in 2007 Main spindle: 10,000 rpm, SK 40 tool holder Working area: X 835 mm, Y 510 mm, Z 510 mm Magazine capacity: 20 tools Work table: Clamping area 1000 x 560 mm Distance between T-slots: 100 mm Load capacity (center): 800 kg (approx.) Table height from the floor: 720 mm Equipped with Heidenhain 530 Operating hours: Control on: 29,835 / Machine on: 28,258 / Program execution: 10,067 / Tool changer: 1,066 In addition, we also have a chip conveyor, as well as various tool holders and milling tools (some of which are new or like new).

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: Gkedpfx Aksyzh Uls Uob *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Gjdpfsd Amgksx Ak Uokb Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Year of construction: 2014, condition: excellent (used), Gainsborough Vertical Form & Seal Bagging Machine Continuous VVF Bagging Machine Complete with Markem-Inage SmartDate X40 Coder Godpfx Akouct Ivs Uokb In Excellent Condition Has had very little use

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Godpfoz Agzdex Ak Uekb Collets Toolholders Additional accessories

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Godoz Agzqepfx Ak Uskb Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. * Compressed-air cutting capability. * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. Gkedpfxszu Nm He Ak Usb * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. * High-power-density linear motors provide high acceleration and dynamics. * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TZ-JRT-30B-2800, Automatic log-cutting machine for toilet paper and hand towel cutting Fully automatic operation with advanced PLC control, LCD touchscreen, and servo motor. The machine is designed to minimize manual intervention, reduce labour requirements, and improve operator safety. The main operating parameters are set directly via the touchscreen PLC. The machine can be integrated with a converting and rewinding line for more efficient production. Designed for long-term industrial operation. Major components are imported, with the remaining components sourced from quality Chinese manufacturers. Technical Specifications Cutting diameter: 130–250 mm, adjustable via PLC Cutting length:50–380 mm, adjustable via PLC Maximum log length: 2,750 mm, adjustable via PLC Log lengths: Adjustable via PLC Cutting speed: Manually adjusted according to log diameter, thickness and cutting length Maximum stable operation speed: Up to 20 cuts/min for logs below 210 mm diameter and cutting lengths of 50–220 mm For cutting lengths above 220 mm: Automatic speed adjustment to approximately 10 cuts/min Automatic blade sharpening Automatic log loading/pick-up table Log storage rack with automatic feeding Automatic waste/reject removal via mechanical pusher (if using the push hand) Electrical connection: 3 × 400 V, 40 A Compressed air: 0.6 MPa Machine dimensions: 3,500 × 2,500 × 2,000 mm Weight: Approximately 3,000 kg (2 parts, cutter and the mechanical pusher) Country of manufacture: China Machine Condition The machine has been in operation at the factory and has been running without any major issues. Installation year 2020, running conditions about 7hrs /one shift. The following maintenance/repairs have been carried out: * Upper drive bearings replaced (2025) * Lower drive bearings replaced (2026) * Drive belts replaced (2026) * Damaged motion-control wiring repaired/replaced (2026) * Every 3-month inspection * Every 6-month lubrication of moving parts The machine is currently dismantled and stored in a dry warehouse. It can be inspected in its dismantled condition. Spare Parts Included Band saw blades: 4,400 × 70 × 0.65 mm price €105/pc, 9 unused blades, 1 sharpened and ready-to-work condition blade, 1 sharpened and ready-to-work blade (width narrow, still can cut most of the articles) Diamond grinding wheels: €80/pc, 1 spare New dust collector/vacuum system: €1,100 - purchased new but never installed (2-way suction and 1-way blown-in, with collection bin, direct attachment to the cutter) Gkodpfezxnmysx Ak Ujb Other Information * Made in China - technical support within 24 hrs, spare parts in about 2 weeks. * Automatic operation * PLC + LCD touchscreen control (screen has original protection film still attached) * Servo-driven system * Suitable for toilet paper and hand towel logs * Suitable for integration into a converting/rewinding production line * Machine dismantled for storage Export outside the Baltic States Inspection possible by prior arrangement. Videos: youtu.be/8-xRCmvARYM youtube.com/shorts/vU4EunMEQt4 youtube.com/shorts/wwuV2Gp30AY youtube.com/shorts/WZjjokJjgZY

Condition: good (used), 1 x Powder Packing Machine/Powder Depositor Gkodpsyt H Aqefx Ak Uob Model: AF-PP5 Range of pack: 1-1.5kg With weigher

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call. Gkjdpfx Aksyr Utno Ujb

Condition: excellent (used), Year of construction: 2021, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 220247, total length: 18,000 mm, total width: 4,000 mm, total height: 3,000 mm, input frequency: 50 Hz, input voltage: 400 V, pressure: 7 bar, The HE 500 is a double-edging line – L-shaped – consisting of 2 grinding machines connected at an angle. The first machine is designed for processing wider sheets of glass, while the second is for narrower sheets. At the inlet of the second machine, there is a centering device that corrects the position of the glass. Technical specifications of HE500: Minimum working size – 400x200, Working thickness – 3 – 25, Oscillating spindle – 1+1, Diamond spindles for grinding flat edges – 2+2 Diamond spindles for grinding bottom bevels – 1+1 Polishing spindles for bottom bevels – 1+1 Diamond spindles for grinding top bevels – 1+1 Polishing spindles for top bevels – 1+1 Polishing spindles for flat edges – 3+3 Spindles for rounding corners – 1+1 Engraving spindle – 2+2 Empty positions – 0 Total power of the XE line installation (kW) – 120 Conveyor belts, motorization: Belts driven by 4 brushless motors Mobile bridge movement Ball bearing guides, controlled by two brushless motors Summary: Gksdpfx Aezznuiek Ueb Bavelloni HE500L Double Edging Line – 1 set. TT5130 feeding table – 1 piece. Horizontal washing machine 2800 – 1 piece.

Condition: new, Year of construction: 2024, Holzkraft Edge Sander Type: KSO 200 F with Veneer Sanding Attachment Sanding unit can be swiveled up to 45° via a lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for better sanding results Oscillation can be switched on/off as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire width of the sanding belt Height-adjustable auxiliary table with dust extraction for sanding radii The spring-loaded belt tension automatically compensates for belt length differences. With double dust extraction Extendable roller table extension With rubber-coated sanding roller Veneer edge sanding attachment with contact shoe with fine adjustment, relief rollers and guide rails With grooved infeed guide for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding is possible Gkedpfxjlht H Nj Ak Usb Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection for dust extraction Dust extraction nozzle diameter 140 / 100 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Power of drive motor 3.0 kW Connection voltage 400 V Sanding unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2023, machine/vehicle number: 142597-100, overall weight: 3,000 kg, This Wittmann Battenfeld injection molding machine, type: SmartPower 60/210 Unilog B8, will be auctioned off online in our industrial auction / machine auction due to the business closure of Blochwitz Formenbau & Kunststofftechnik – including CNC machining centers, injection molding machines, machine vices, tool holders, and much more. Gedszy H Irepfx Ak Uokb You can find this and many other items on our platform.

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Gkedpjwwzudsfx Ak Usb Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: used, Year of construction: 2015, machine/vehicle number: 136666-100, overall weight: 4,600 kg, This Wittmann Battenfeld injection molding machine, type: SmartPower 120/525 Unilog B6P, will be auctioned online as part of our industrial auction / machine auction – business liquidation of Blochwitz Formenbau & Kunststofftechnik – including CNC machining centers, injection molding machines, machine vises, tool holders, and much more. You will find this and many other items on our platform. Gksdpfx Akezy H Ede Usb

Condition: refurbished (used), ROLLFORMING MACHINE PRODUCING SQUARE PROFILES WITH 5 TONES OF TOOLS MADE IN ITALY Gkedpfsfgl Aqex Ak Uob

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation Gkjdszzrmpspfx Ak Ujb - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620