Used Spotting Ruler for sale (1,698)

Condition: used, plate size: 755 x 373 mm plate thickness: 115 mm Lhsdpfx Ajb Npd Ueffer

Condition: used, Year of construction: 2005, functionality: fully functional, PERFORMANCE AND DESIGN: Pressing Capacity: 26-100 T (adjustable) Maximum Return Force: 45 T Table Dimensions: 1,600 x 1,300 mm Maximum Table Load Capacity: 12,000 kg Distance – Ram to Lower Table (Max.): 1,700 mm Frame Type: 4-column Overall Dimensions approx. (W x D x H): 4,900 x 2,800 x 5,500 mm Total Weight approx.: 17,000 kg T-slots and drillings to DIN 650 – 22 mm HYDRAULIC UNIT: Hydraulic Pump (Brand: REXROTH): SYDFE2x/071R-PPA.. Motor Power: 15 kW Max. Operating Pressure: 200 bar Pressure Accuracy during Pressing Stroke: +/- 5 bar Oil Tank Volume: 475 L Hydraulic Oil Specification: HLP 36 ELECTRICAL SYSTEM ACCESSORIES ELECTRICAL CONNECTION: - Main Supply: 400V AC - Control Voltage: 24V DC Ljdpfx Afoxd Tv Dofehr - Frequency: 50 Hz - Hydraulic Main Motor Connection: 15 kW - Total Connected Load approx.: 21 kW FEATURES • 180° foldable ram plate up to 7.5 tons (tilted) • Ram ejector 5.6 tons, 160 mm stroke • Stroke extension by 300 mm • Increased speed DOCUMENTATION • Hydraulic diagram • Electrical diagram • Technical drawing • Data sheet FUNCTIONS AND DESCRIPTIONS CONTROL OF THE PRESS: The press is operated via the operator panel. • Raise/lower the ram plate • Tilt the ram plate • Extend/retract the table • Operate the ejector • Set press force The control system is Siemens Simatic S7-634.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Ledpfx Aodzp Tcsffohr Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: good (used), Marking ruler, planing ruler, test ruler, straightening ruler, straightening beam, clamping plate, marking-spotting plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, precision measuring table -Inking ruler: 145 x 1515 mm -Dimensions: 145/1515/H265 mm -Weight: 99 kg Lhsdpfx Ajw H Nu Dsffsr

Condition: used, Year of construction: 1980, pressure 40 t table length 670 mm table width 570 mm Ljdot Hxczjpfx Affohr total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 1985, pressure 200 t table length 1500 mm table width 1200 mm Distance between columns 1250 mm Stroke 1150 mm Table surface area 1200 x 1500 mm Distance table/ram, stroke up 1475 mm Table height above floor 638 mm Ram surface 1200 x 1500 mm Weight 16,0 t Dimensions (WxDxH) 2,2 x 4,52 x 4,6 m with pivoting ram, moving and tiltable table, ejector in table, ram interlocking via toothed bar, injection unit in ram Ledpfxevuul Eo Affshr

Condition: good (used), Length: 1000 mm Lodpfjf D Sp Ssx Affshr Width: 600 mm Plate height including ribbing: 135 mm Plate edge height: 35 mm Weight: 152 kg

Condition: used, Year of construction: 1998, Performance and Design Pressing Capacity: 26–100 t (adjustable) Return Force: 45 t Table: 1,600 × 1,300 mm Max. Table Load: 5,000 kg Distance Ram – Table (max.): 950 mm Frame Type: 4-column Overall Dimensions (W×D×H): approx. 3,400 × 4,200 × 3,700 mm Total Weight: approx. 8,500 kg T-slots/Bores: DIN 650, 22 mm Hydraulics Pump: Rexroth SYDFE11x71RN0030CAM Motor Power: 7.5 kW Max. Operating Pressure: 200 bar Press Stroke Pressure Accuracy: ± 5 bar Tank Volume: 215 l Hydraulic Oil: HLP 36 Electrics Main Supply: 400 V AC Control Voltage: 24 V DC Frequency: 50 Hz Main Motor Connection: 7.5 kW Total Connected Load: approx. 10 kW Features 180° tiltable ram plate (up to 3 t) Ejector in table (3.5 t, 130 mm) Oil ports for core pull Lhodpfjxd Tiqox Affjr Digital measuring system Material feeding (injection molding) via ram plate possible Speed increase possible Documentation Hydraulic schematic Electrical schematic Technical drawing Data sheet (used spotting press, 100t press, Reis hydraulic press, 4-column press, toolmaking press, forming press, injection molding press, used machine, industrial machine, hydraulic press, tool testing press) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all aspects of the national Brazilian safety guideline NR 12, which builds on these standards. Our key strength is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly affordable prices. We use components from leading European manufacturers for the hydraulics of our presses.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, table width: 980 mm, table length: 750 mm, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS Max. clamping force: 300 kN Max. load capacity of the lower plate: 4,000 kg Max. load capacity of the upper plate: 1,200 kg Swivel angle: 360° Table data Table dimensions: 980 x 750 mm Passage: 1,090 x 920 mm MACHINE DETAILS Lsdpjvxtikefx Affehr Machine weight: 3,900 kg Dimensions: 2,200 x 1,900 x 2,300 mm EQUIPMENT Energy storage (impact trigger) Special wax injection unit User-friendly control panel with graphics

Condition: good (used), Hommel Dura measuring plate / control plate made of natural hard stone Hommel Dura measuring plate made of hard stone (granite plate) length: 3000 mm width: 1000 mm thickness: 300 mm 1 x T-slot Lhjdok Shcujpfx Affor More measuring plates in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: used, steel ruler -Manufacturer: Hoffmann, precision steel ruler, stainless steel, length 2000 mm Lhodpouz H T Ssfx Affor .: 461400 2000 -Dimension 2040/30/1 mm -Weight: 0.5 kg

Condition: used, Year of construction: 1987, pressure 4000 kN table length 2500 mm table width 2000 mm dayligth 2500 mm stroke 2600 mm Lhsdpfxjvxwi Us Affor tank capacity 1000 l total power requirement 56 kVA weight of the machine ca. 85 t dimensions of the machine ca. 9,2 x 3,1 x 8,2 m integrated wax-injection unit with 0-5 bar

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Type: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Upper table rotation 180 degrees Lhsdpfxjwpkv Io Affsr Specifications Metric US Standard Capacity 30000 Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed 480 mm/min. Return speed 2100 - 3000 mm/min. Dimensions (approximate) Length 6150 mm Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.

Year of construction: 2019, condition: refurbished (used), machine/vehicle number: DF0137, pressure:120 t table length:600 mm table width:600 mm stroke max.:400 mm dimensions:1070 x 2340 x 2800 mm weight:4,2 t pre-running speed:10 mm/sec :26 mm/sec :200 l Oil cooling (electric):1,5 kW (max) Lsdpfeffamtjx Affshr table height:875 mm Working height from to:500 mm diameter of piston:230 mm total power requirement:15 kW pump capacity:24 Lt./sec Pressure power:300 bar :76 mm :650 mm capacity of ejector in table:20 t :150 mm Recommended oil:46er

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t Lhodpsiulkqsfx Affsr - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: used, Year of construction: 1995, pressure 80 t table length 1.200 mm table width 1.000 mm 250 mm 1.200 mm Ljdpfx Asvbwitoffjhr max. table load 7.000 kg distance between columns 1.100 mm voltage 400 V weight of the machine ca. 11,0 t dimensions of the machine ca. 4,40 x 2,58 x 3,66 m - Serial No.: 760/12312 Dimensions of upper and lower plate: 1.200×1.000 mm. Press upper plate is tilting by 150° Lower plate tilting by ±70° at front/back side The press is equipped with: - 2 energy accumulators in order to better gauge the adjustment of the mould halves - an automatic wax injection unit to check quality of pre-production mouldings - hydraulic ejection unit on lower plate

Condition: excellent (used), Year of construction: 2022, clearance between the columns: 2,130 mm, overall weight: 56,000 kg, retraction force: 55 t, clamping force: 2,000 kN, MIL263 straight version for floor installation few operating hours Siemens S7-1500 / Multipanel TP1200 diagnostic system 2 pcs. Sitema safety catch lower pull-out table; upper machine table tiltable by 180 degrees rotary table with 5 positions electronic parallelism control separate hydraulic unit on trolley for core pulls 4+4, standard version pump 8 liters/min, 2.2 kW Lhjdpowu Upiofx Affsr

Condition: used, Year of construction: 1980, pressure:24 t Lsdpfoufufbox Affshr table length:1060 mm table width:650 mm Smallest opening:165 dimensions of the machine ca.:1300 x 700 x 1500 mm This Millutensil die spotting / tryout press has a capacity of 24 tons, this machine you can use for die en mould spotting press. This kind of machines are used for splitting, adjusting, maintenance and try-out operations on dies and moulds. This machine is produces by Millutensil s.r.l. in Italien.

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Lhodoulwzmjpfx Affjr Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 1991, Millutensil spotting press BV25/PM - Adjustable ejection force (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Lhjdpeum Ry Esfx Affer Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0309, pressure:200 t table length:2500 mm table width:2000 mm stroke max.:2050 mm dimensions:ca. 9200 x 4700 x 5800 mm draw back pressure:25 t Approx. weight (w/o operational materials):50 t column diameter:210 mm table speed:25 mm/sec table extendable:2000 mm table speed:30 mm/sec table load:15 t power capacity:20 kW work speed:1 - 10 mm/sec. pre-running speed:10 mm/sec :25 mm/sec :10 mm/sec. Oil Tank Capacity:400 l Oil cooling (electric):1,5 kW (max) Podestal height:650 mm Table Height:800 mm Ram Height:850 mm Control System by Siemens:S7 1200 Monitor:WEG 12 Zoll :10200 ? Maintenance Balcony:5000 ? :4.000,-- ? :1.000,-- ? :18000 ? :1.500,-- ? :12000 ? Upper Tool Folding:170 Grad Lsdjfxyi Dspfx Affehr Swivel table:75 Grad Table tiltable:75 Grad Ajecters with 60T in the pestle centre:12000 ? Blessed plate folding by 180 degrees:14000 ?

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Lhsdpforr Ui Rjx Affjr Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg

Condition: as good as new (ex-display), Year of construction: 2015, pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück Lhjdpfx Afeffamqefsr stroke length max.:1200 mm daylight dimension : table/slide up:1200 mm table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

Condition: new, machine/vehicle number: DF0261 - Rev.00, pressure:63 t table length:1200 mm Lhsdpfefhcc Sex Affsr table width:1000 mm stroke max.:1050 mm dimensions:ca. 3350 x 1800 x 4700 mm draw back pressure:6 t Approx. weight (w/o operational materials):10 t column diameter:120 mm Fold-down upper tool:180 Grad Swivable Table:75 Grad table speed:25 mm/sec Table tilting:75 Grad table extendable:1100 mm table load:5 t Engine Output:10 kW Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max) Monitor:(WEG) 12 Zoll

Condition: new, machine/vehicle number: DF0177, pressure:315 t table length:2500 mm table width:1800 mm stroke max.:800 mm dimensions:3910 x 4905 x 4169 mm weight:36 t column diameter:220 mm power capacity:25 kW work speed:1 - 10 mm/sec. :1 - 25 mm/sec :450 l :entfällt ? :entfällt ? :entfällt ? :entfällt ? :enthalten ? :entfällt ? :entfällt ? :entfällt ? :entfällt ? Ledofxyhiepfx Affjhr