Used Spot Welder for sale (1,776)

Condition: used, Citoarc M303C Mig Welder, 300 Amp Max, In Built Wire Feed. S/No. H-03-157379 Hedpfjy Amlrex Ai Nonk Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Table size 2600*1800mm Hnodpfxorl Irke Ai Nsk maximum daylight 2200 mm clamping force 300T table size 2600*1800mm max day light 2200mm clamping force 300T

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m Hnedpfxextqv Tj Ai Nek - Serial-No.: 18310126 - 2

Condition: excellent (used), Year of construction: 2001, pressure 100 t table length 2000 mm table width 1580 mm voltage 400 V max. table loading capacity 10.000 / 20.000 kg Hnodpfxoucgqwo Ai Nok total power requirement 18 kW weight of the machine ca. 22 t dimensions of the machine ca. 5,65 x 2,95 x 5,85 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm d upper table no swiveling 10t / swiveling 6t d lower table 22t

Condition: used, total width: 800 mm, total height: 1,600 mm, total length: 1,200 mm, Empty weight: 500 kg - Documentation available: No - CE certificate present: No - Serial number: 4234 - Configuration: Pneumatic - Power [A]: 450 - Power [kVa]: 50 - Transport dimensions: 1200mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Hjdpfx Aewyktnji Njnk

Condition: good (used), Max. welding power 20 kVA Short circuit power 25 kVA Nominal power at 50 % ED 10 kVA Throat 500 mm Max. Secondary short circuit current 10 KA Connected load 15 kVA Dimensions W x D x H 400 x 1100 x 1150 mm Weight 200 kg Accessories / Special features: - Water cooling by external connection - Adjustable current time 0 - 10 - Adjustable electrode force by adjusting the spring - Mechanical foot switch Note / Reference value: With a max. secondary short-circuit current of 10 KA, a max. sheet thickness (normal sheet) of 2.5 mm can be welded. Hnodpfx Asfi Tl Hji Njk Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, hose package length: 4,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Cjays Tig 200E ACDC – Gas-cooled TIG ACDC 3 Months Warranty Specifications: 5-200 AMP 230 Volt 2/4 Step Pulse / Pulse Frequency Pre gas / Post gas Start current / End current Up slope / Down slope AC Balans Elektrode option Including: SR17 Welding torch, ground cable with clamp, gas cable, and manual. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Hodpfeyzpc Dsx Ai Nenk Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 1973, pressure 40 t distance between columns 1150 mm stroke 1100 mm distance table/ram, max. stroke up, adjustment up 1035 mm table surface area 900 x 1280 mm table height over floor 630 mm ram surface 1000 x 1200 mm side window 705 mm power capacity 5,5 kW weight 9,0 t Dimensions (WxDxH) 2,35 x 3,8 x 3,55 m Hsdpfeyx Inmex Ai Njnk with swivelling ram, movable table, ejector in table

Condition: used, Year of construction: 1979, pressure 40 t distance between columns 620 mm stroke 975 mm distance table/ram, max. stroke up, adjustment up 940 mm table surface area 590 x 1000 mm table height over floor 770 mm ram surface 590 x 1000 mm side window 470 mm max. tool weight 2,5 t max. capacity of swivelling ram plate 1,5 t Speed down 0 - 50 mm/s Speed up 0 - 34 mm/s Hnedpfx Aisyx Ingo Nek Working speed 0 - 10 mm/s oil volume 150 l power requirement 9,5 kW weight 3,2 t dimensions (WxDxH) 2,0 x 2,4 x 3,0 m with swivelling ram, movable table, ejector in table

Condition: used, Year of construction: 1987, pressure 400 t table length 2500 mm table width 2000 mm Distance between columns 2000 mm Stroke 2600 mm Distance table/ram, stroke up 2500 mm Table surface area 2000 x 2500 mm Table height above floor 1120 mm Ram surface 2000 x 2500 mm Side window 1500 mm max. capacity of swivelling ram plate 20 t Oil volume 1000 l Power capacity 48,0 kW Weight 85,0 t Hnjdpfjvuumiex Ai Nsk Dimensions (WxDxH) 8,6 x 5,3 x 8,2 m with swivelling ram, movable table, inclining table, ejector in table stored in dismantled condition - Video at seller's site before dismantling available

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 7903P, type of input current: three-phase, Equipment: type plate available, Spot welding tongs with built-in thyristor-controlled timer, with current regulation, with compensation, 6 kVA, water-cooled Hjdoxqf Hzjpfx Ai Nonk

Condition: used, MIG / MAG Pulse Shielded Gas Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Item No.: 4.075 Serial No. Year of manufacture: approx. 2000 Output: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 50 V Open-circuit voltage: approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding processes: MIG/MAG/TIG (program and manual operation) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Separate 4-roller wire feeder FRONIUS Type VR 152 with approx. 1.5 m interconnection hose package - 4 m hose package with new central connection Hnedpfx Aijyxy Tbe Njk - External Fronius water cooling unit Type FK 71 - New welding gas pressure regulator - Welding machine equipped with 1.2 mm welding wire Dimensions (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration Also suitable for TIG and stick welding. Additional equipment for TIG and stick welding not included.

Condition: used, MIG MAG welding machine, shielding gas welder CLOOS type GLC 357 N MIG MAG welding power source Serial no. 576 Year of manufacture approx. 1985 Rated output 350 Amp. Output 350 Amp. - 80% duty cycle 310 Amp. - 100% duty cycle Continuously adjustable output range Connection hose package: 4.5 meters Power supply: 380 Volt, 50 Hz, 32 Amp plug - 2-stroke and 4-stroke welding function - External wire feeder type CK 72 ZK with 2-roller drive and 4.5 meter hose package - 3 meter hose package with central connection and CLOOS hand torch - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirements (L x W x H): 1250 x 600 x 1100 mm Weight: 260 kg Hjdpfxohubg To Ai Nsnk Machine tested – fully functional

Condition: used, Spot welding pliers with DALEX RS 17 control unit and balancer Spot welding pliers DALEX Type A 3139 Serial number: 98G 69757 Year of manufacture: 1998 Rated power at 50% duty cycle: 8 kVA Hsdpfx Aijyxrhdj Nonk Maximum welding power: 22.4 kVA Open-circuit voltage: 2.9 Volts Maximum electrode force: 200 daN Maximum short-circuit current: 9.5 kA Cooling water flow: 1.5 l/min Power supply: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Spot electrode diameter: 6/12.5 mm Electrode gap: max. 230 mm - Pliers with water cooling (without cooling unit) - cooling water requirement 1.5 l/min. - Suspension device: DALEX balancer Type D4-21 Weight of welding pliers: 15.5 kg Welding controller DALEX RS 17 LS 5-phase synchronous welding controller with 2 welding programs PAS no.: 0413-410 Serial no.: 41341000278 Year of manufacture: 2006 Operating modes: Single (EP) / Series (SP) Pre-hold time, post-hold time, hold-open time, and pause time: each adjustable 1 – 99 cycles Current time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 Skt. Impulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter setting via arrow keys - with solenoid valve control - Current adjustment via phase angle control - Welding control unit in steel switch cabinet for wall mounting Total weight: approx. 30 kg Very good condition

Condition: excellent (used), Year of construction: 2013, PRATTO equipment for zinc coated welded meshes Hnodpoyxn Rnsfx Ai Nek Technical data for the machine : STARWELD PE is a high-performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets • 2 pay-off for feeding the cross wire • 36 pay-off for feeding the line wire • Fence dimensions between 1 and 3 m (2 types can be made simultaneous, example 1 m with 2 m, 1.5 m with 1.5 m, 1.2 m with 1.8 m) • Range of wire diameter 1.2 – 3 mm • Working speed (strokes/min) Up to 130 • Automatic stacking of rolls • ⁠PLC management

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A Hnedswf Rg Sopfx Ai Nok --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC Hnedpfowf Rgrex Ai Njk --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed Hsdpfx Aswf Rg Esi Nenk with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 Hodpjwf Rgxefx Ai Nenk --> Cooling type: F --> Protection class: IP 23

Condition: not inspected (used), Year of construction: 1991, functionality: unexamined, machine/vehicle number: 14098/91, short-circuit current: 1,200 A, overall weight: 3,000 kg, total width: 2,400 mm, total height: 2,700 mm, total length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! Hsdoyk Up Tjpfx Ai Nsnk Placing a bid obligates the buyer to collect the machine within the period from 08.04.26 to 16.04.26! MACHINE DETAILS Electrical data Electrode force: 26,550 N Operating voltage: 380 V Connected load: 474 kVA Rated power: 3 x 50 kVA Rated current: 228 A Secondary voltage: 3.5 - 6.3 V Secondary rated current: 17,400 A Short-circuit current: 1,200 A Secondary short-circuit current: 92,000 A Mains frequency: 50 Hz Dimensions & weight Dimensions (L x W x H): 2,500 x 2,400 x 2,700 mm Weight: 3,000 kg External reference: 15

Condition: as good as new (ex-display), Year of construction: 2022, Machines are in stock and ready for demonstration purposes. Gladly also on Saturdays! We offer a laser welding machine for manual operation. This technology is very new and often lacks expertise, infrastructure and after-sales service in the sale of these machines. However, these are exactly our strengths and this is what we put a lot of emphasis on. Decades of experience in the welding trade are the perfect basis for us to advise you perfectly. We do not only deliver a machine but support you by demonstrations, feasibility tests, parameter optimization ... Everything that makes a competent partner. Technical data: ===== Laser source: fiber laser Output power: 1500 Watt Power range: 10 - 100% Wavelength: 1080nm Output operation: continuous / modulated modulation frequency: up to 50kHz adjustable axial run-out: 0.1 - 5mm central focus distance: standard 120mm (150mm optional) cooling: integrated water cooling Hedpsi Elxyofx Ai Njnk heating time: 1 minute working humidity:

Condition: used, Year of construction: 1975, machine/vehicle number: 12138/4, nominal capacity: 20 kVA throat: 250 - 600 mm spark plug air gap: 270 mm welding capacity steel: ca. 2,5 + 2,5, max. 3,5 - 1,5 mm electrical connection: 380 V kW space needed: 470 x 1170 x 1300 mm Hodpfx Asb Nvimei Nenk weight: 210 kg

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW Hsdpfx Aez H Dyei Njnk space needed: 700 x 1420 x 2000 mm weight: 750 kg

Year of construction: 1973, condition: good (used), machine/vehicle number: 699, pressure power: 40 t table size: 670 x 470 mm Hnjdey Dpbopfx Ai Njk tappet area: 670 x 470 mm passage between columns: 620/470 mm max. mounting height: 740 mm pressure speed: 20 mm/s rapid move: 50 mm ejector power: 3 t electrical connection: 380 V, 9,5 kW space needed: 2200 x 1875 x 3000 mm weight: 2400 kg

Condition: used, machine/vehicle number: 4229, nominal capacity: 12,5 kVA throat: 350 - 500 mm spark plug air gap: 120 mm Hnodpfx Aiebh Nxro Nek welding capacity steel: 8 mm electrical connection: 380 V kW space needed: 400 x 1000 x 1150 mm weight: ca. 190 kg