Used Split for sale (674)

Condition: used, Year of construction: 2013, operating hours: 12,345 h, functionality: fully functional, machine/vehicle number: 12345678, Balfor 40 t horizontal large log splitter. Splitting chamber 3m. 2 way 4 way hydraulic adjustable splitting knife. Dual hydraulic pump. Temp controlled oil cooler. Can operate in manual or full remote control modes. Videos available on request. Complete with drawbar and axle. Lhsdpfexp Uzrjx Affer

Year of construction: 1944, condition: defective spare-parts repository (used), functionality: limited functionality, The machine was in use until recently; foams and elastomers up to 90° Shore can be split with it. It handles thicknesses up to 50mm (44mm) and widths of 200mm. New band knives are available. Must be operated on 32A 3P 400V without RCD. As it no longer meets safety requirements, it is sold as defective. Ledpfx Ajxnin Rjffjhr We look forward to receiving your offer.

Condition: new, - Motor power 15kW - Control SPS supported, with two-hand safety circuit - cutting force 50to - idle speed ca.22,3 mm/sec Lsdpfxjfbx Nbo Affehr - Splitting table straight design - cutting channel: - max. length ca.3000mm - max. opening ca.1250mm - machine weight ca.4,8to goods to order price and further information on request

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. Lodpfsv Dvhyex Affjhr The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1250 SC L 112, cutting speed: 30,000 mm/min, number of straightening rollers: 3, - 5 pairs of slitting knives – fully automatic positioning - Cross-cutting by means of a guillotine shear - Sheet width: 250 – 1250 mm Lodpfxsxl U Uwe Affshr - Sheet thickness, steel: 0.4 – 1.25 mm (400N/mm²) - Sheet thickness, stainless steel: 0.4 – 0.9 mm (550N/mm²) - Sheet thickness, aluminium: 0.5 – 1.50 mm (AlMg3) - Min. strip width: 60 mm / 15 mm from sheet edge - Straightening unit: 3-roll, progressive, 180° swivel - Power supply: 3PH 400–488 V AC/N/PE - Compressed air supply: 25 l/min at 6 bar (short-term) Total run time: Length: 19,415 m Cuts: 6,852 -> Values may slightly change as the machine is still in use.

Condition: used, Splitter wedge for frame saw Rollers electrically driven Available mid-October Location: Austria, near Leoben Ljdpfjxd Ub Usx Affjhr

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, overall weight: 5,000 kg, cutting force: 40 t, input voltage: 400 V, number of blades: 1, power: 18.5 kW (25.15 HP), roll length: 2,600 mm, roll diameter: 1,500 mm, noise level: 85 dB, Roll Slitting Machine BOA HRSM 40T 1500 x 2600. This machine is perfectly suited for cutting large rolls of paper/cardboard or even plastic into pieces. The machine is sold in a refurbished condition. It is currently being overhauled and will be provided with a new coat of paint. The machine is supplied with an infeed conveyor and outfeed table. The transport belt is 3,000 mm long and 2,000 mm wide. Technical specifications roll slitter: Maximum roll diameter: 1,500 mm Ljdpfx Aexbddaeffehr Maximum roll width: 2,600 mm Cutting force: 40 tons Drive: 18.5 kW Cutting speed: approx. 4.5 cm/sec The machine can be inspected at our facility in Almelo.

Condition: good (used), Year of construction: 2009, machine/vehicle number: K08258, Compact splitting system with decoiler Loading prism Pressure arm AH 1500/5000 kg Clamping range 480 - 550 mm with 3 sheet tables with 4 overflow tables with 2 underframes with 2 stairs with guillotine shears for cutting to length Film holder with brake with 5 pairs of blades color: blue Ljdpfjuqbq Aex Affshr Total power requirement: 3 x 400 V Coil weight: 5000 kg straightening rollers: 7 Number of knives: 5 pairs Top straightening rollers: 3 Bottom straightening rollers: 4 Speed: 35 m/min Capacity: 1500x1.5 mm, 2.5 m aluminum, 1.0 mm VA Dimensions: 11541 x 5300 x 1770 mm Weight: 9100 kg Machine is repaired, checked and cleaned by a specialist and is then fully functional. Test run will be carried out.

Condition: new, Year of construction: 2025, Engine power 7,5kW - Cutting force 30to Cutting channel designed for - max. roll length 1500mm - max. roll diameter 850mm - machine weight approx. 3500kg - tank capacity approx.110liter - hand guard in the area of the control panel and opposite to it -knife lock Lhjdpfjgl Adzex Affsr -splitter table straight execution -documentation 2-fold German ( 1x text form, 1x CD ) -color RAL 5012 - light blue protective grid/knife bar RAL 1028 melon yellow machine in stock and immediately available Price and further info on request

Condition: new, Year of construction: 2024, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges. Lhedpjv Dvfrjfx Affer

Year of construction: 2004, condition: good (used), Line for cutting and splitting firewood PINOSA Brand - PINOSA Italy Model - EPC 3300 Construction year - 2004. The condition is excellent, the machine is in operation and it is possible to test it. Lhsdpslwpgbjfx Affer Cutting with a circular saw from Vidia material. Fully automated with the possibility of cutting only, as well as cutting and splitting. Max cutting diameter 40cm. Max log length 4m. Pressure force 35 tons. Electric motor power - 2x22 kW.

Condition: new, Year of construction: 2025, PROFESSIONAL 8 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 450 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. Device description Lsdporidpaefx Affohr Device equipped with side tables to facilitate feeding of material for splitting. Fail-safe and powerful motor for 230V power supply. The log splitter ensures safe operation in accordance with EU standards, among others thanks to the double handle. The angled wedge helps the wedge sink into the material. Adjustable bayonet allows you to set the return of the wedge to any height. LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Engine 3 kW (4.1 HP) / 230 V Pressure 8 T Wood length range 250 - 520 mm Wood diameter range 80 - 450 mm Feed rate of the wedge 0.025 - 0.04 m / s Wedge return speed 0,15 m / s Maximum hydraulic pressure 265 BAR Capacity of the hydraulic tank 3.3l External dimensions 1070 x 800 x 1500 mm Weight 98 kg

Condition: new, The TITAN 43/20 CD+E firewood processor with joystick control cuts logs with a maximum diameter of ø 43 cm using a harvester bar and splits them with a splitting force of 20 tons. This is a combination machine (electric and PTO connection). Demonstration and inspection by appointment possible – the machine is currently in stock and available immediately. Warehouse clearance – special price – interim sale reserved. Lhjdpfxstrmg Hj Affsr

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. Lodpeupiapofx Affehr - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, Klanke Supercut roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 3000mm Lhsdpfx Aen I Rgpoffsr Cutting channel opening: 1200mm Motor power: 15kW Cutting force: 50to Order goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: new, Year of construction: 2024, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Maximum log diameter 500 mm Lhjdpfxov Dvkzj Affer Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: good (used), Line for cutting and splitting firewood PINOSA Lodpfx Afsuzxkvefehr Brand - PINOSA Italy Model - EPC 3300 Construction year - 2004. The condition is excellent, the machine is in operation and it is possible to test it. Cutting with a circular saw from Vidia material. Fully automated with the possibility of cutting only, as well as cutting and splitting. Max cutting diameter 40cm. Max log length 4m. Pressure force 35 tons. Electric motor power - 2x22 kW.

Condition: new, Year of construction: 2025, Yanigav Log Splitter FB90 • Weight: 1080 kg • Force: 32 t Lodpfx Aor D Nhmoffjhr • Drive: Hydraulic pump • Log length: up to 115 cm • Log diameter: 30-80 cm • Wedge length: 45 cm

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger Ledpjuph Uxjfx Affjhr - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, Klanke roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Blade protection -Emergency stop rip cord -Siemens SPS Lhedpfon Hyxlox Affer Technical data: Blade length: 1500mm Cutting channel opening: 1200mm Motor power: 7,5kW Cutting force: 30to Ordered goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: new, Year of construction: 2025, - Motor power: 7.5 kW - Cutting force: 25 tons Cutting channel designed for: - max. roll length: 1,500 mm - max. roll diameter: 800 mm - Machine weight: approx. 3,000 kg Lhodstvmw Depfx Affsr - Tank capacity: approx. 110 liters - Hand protection grille at the operator control panel and opposite side - Splitting table, straight design - Documentation: 2 copies in German (1x text format, 1x CD) - Color: RAL 5012 – light blue Protection grille/knife beam: RAL 1028 melon yellow Machine in stock – immediately available Price and further information on request

Condition: new, - Motor power 7.5 kW - Cutting force 25 tons Cutting channel designed for: - Max. roll length 1500 mm - Max. roll diameter 800 mm - Machine weight approx. 3000 kg - Tank capacity approx. 110 liters - Hand guard grille in the control panel area and opposite - Straight version of splitting table - Documentation in German (2x: 1x in text form, 1x on CD) - Colour scheme RAL 5012 – light blue Protective grille/knife beam RAL 1028 melon yellow Machine in stock – immediately available Price and further information upon request. Lsdpfx Afjd Tfzdjfehr

Condition: new, Roll splitter for shredding waste rolls of paper and film - motor power 9kW - PLC-based control, two-hand safety circuit D2h9jg7 - Cutting force 35to Lhsdpfxstvgzbo Affer - Splitting table straight version - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm - Machine weight approx. 4 tons -Color RAL 5012 - light blue - Hand protection grille in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Stock item - immediately available

Condition: new, Year of construction: 2025, Motor power 7.5 kW - Cutting force 30 t Cutting channel designed for - max. roll length 1500 mm - max. roll diameter 1250 mm - Machine weight approx. 3800 kg - Tank capacity approx. 110 litres - Hand protection guard in the area of the control panel and opposite - Knife locking mechanism Lhsdpfxoltmi Sj Affsr - Splitting table, straight design - Documentation supplied twice in German (1x printed, 1x USB) - Colour: RAL 5012 - light blue Protective guard/knife beam RAL 1028 melon yellow Machine in stock – immediately available Price and further information on request

Condition: new, - Motor power 9kW - PLC-based control, two-hand safety circuit - Cutting force 35to - Splitting table straight design - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm Lhodpfx Aod Hf Tdoffjr - Machine weight approx. 4 tons - Hand guard in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Stock item - immediately available Price and further information on request