Used Spinner for sale (91)

Condition: ready for operation (used), A CNC horizontal machining center by Spinner is offered, equipped with a twin spindle and two dual tool changers. Travel X/Y/Z: 1000mm/850mm/850mm, distance from spindle center to pallet front face: 100-950mm, distance from spindle nose to table surface: 150-1100mm, rapid traverse X/Y/Z: 32m/min, pallet size: 2×630×630mm, max. pallet load: 1000kg, distance to table: 360mm, table top height above floor: 993mm, door opening: 1200mm, table threads: M16, tool interface 1/2: SK40/SK50, max. speed 1/2: 10000rpm/6000rpm, power S1 1/2: 22kW/22kW, power S3 1/2: 26kW/26kW, max. torque S1 1/2: 139Nm/556Nm, max. torque S3 1/2: 164Nm/656Nm, tool stations 1/2: 60/40, max. tool diameter 1/2: 80mm/115mm, max. tool weight 1/2: 8kg/20kg, control: Fanuc 0i. Machine dimensions X/Y/Z: 5970mm/3470mm/3362mm, weight: approx. 23000kg. Documentation available. Inspection by appointment possible. Bdedozipgcjpfx Amroh

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, total height: 2,500 mm, total width: 1,800 mm, table load: 250 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, product length (max.): 2,400 mm, This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details. • Condition: Operational; reportedly very low usage • Control: To be confirmed • Power supply: 3 x 400 V / 50 Hz • Total power: 20 kVA • Compressed air: 6 bar • Table: 650 x 410 mm; 3 T-slots (14 mm) • Rapid traverse: 48 m/min • Tool magazine: 24 positions; max tool Ø 77 mm (125 mm with adjacent pocket free); max tool length 200 mm; tool change time 1.3 s • Coolant system: 250 L • Spindle hours: Unknown (reported very low) Additional equipment • New 4th axis (included, never installed, unused, still in box) Bodpfxsykt T De Amrjdh • Complete tooling set included (as shown in the pictures) • Tool cabinet (as shown in the pictures) Technical Specification Taper Size SK 40

Year of construction: 2005, condition: ready for operation (used), A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement. Bsdpfx Amox I Rpxorjdh

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1119, travel distance X-axis: 1,100 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Spindle speed, max.: 8,000 rpm Rapid traverse rate, X/Y/Z-axis: 18 / 18 / 15 m/min Table area: 1,200 × 600 mm Bdjdezpw Egspfx Amrjh Workpiece weight, max.: 1,000 kg Spindle connection: ISO 40 Number of tool changer positions: 24 MACHINE DETAILS Control system: Siemens 840D SL ShopMill Coolant pressure through the spindle: 20 bar Connection power: 400 V, 50/60 Hz Current: 50 A Dimensions & Weight Footprint: approx. 3,000 × 2,350 mm Machine weight: approx. 8,000 kg EQUIPMENT ShopMill Preparation for 4th axis

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, spindle speed (max.): 7,000 rpm, spindle bore: 42 mm, controller model: Siemens 840 D - SL, counter spindle speed (max.): 7,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Bar diameter: 42 mm Travel X-axis 1/2/3: 180 mm Travel Y-axis 1/3: ±45 mm Travel Z-axis 1/2/3: 704 / 620 / 704 mm Main spindle Speed: 7,000 rpm Drive power: 22 kW / 16.5 kW Spindle torque: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Counter spindle Speed: 7,000 rpm Drive power: 19 kW / 16.5 kW Spindle torque: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Tool turret Number of turrets: 2 + 1 pos Number of tool stations: 3 x 12 pos Number of live tool stations: 3 x 12 pos Rotational speed of driven tools: 8,000 rpm Power: 11.4 kW / 2.3 kW Torque: 26 Nm / 14 Nm Tool holder: VDI 25 Bdedpfeyxmnxex Amrjh Rapid traverse (X / Y / Z): 30 m/min Acceleration: 0.5 g MACHINE DETAILS Control: Siemens 840 D - SL Total power requirement: 60 kW Dimensions & Weight Space requirement: approx. 8.2 x 3.3 x 2.5 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Knoll chip conveyor High-pressure coolant (14 bar) Parts catcher Counter spindle Interface for bar feeder Spinner Barload BL 0146 bar loading magazine C-axis: 2x 0.001° Hydraulic unit Hainbuch collet chuck Y-axis: 2x ±45 mm Various tool holders Various collets Tool measuring arm

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,013 h, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, table length: 1,100 mm, table width: 560 mm, controller model: 840d SL ShopMill Operate, rotational speed (max.): 12,000 rpm, operating hours of spindle: 203 h, For sale is a machining center of the brand Spinner and the type P3-620 The machine has an internal 2 compartment pallet changer, which makes it possible to set up during the work process. Particularly noteworthy are the 203 spindle hours and the very good condition of the machine Technical data: Year of construction: 2011 Bjdpfet Sftwsx Amrodh Control: Siemens 840d-SL ShopMill Operate Spindle speed: 12,000 1/min Spindle holder: SK 40 Table dimensions: 1,100*560 mm Travel X 620 mm Travel Y: 520 mm Z travel: 460 mm Tool changer: 32 pockets (chain) Tool changer head: double arm Pallet changer: 2-fold (180 °) Machine lighting, Chip conveyor in the milling area, Chip conveyor scraper belt with coolant device Belt filter system with IKZ 40 bar Hydraulic oil cooling system, Rotary feed-through in the table On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 8,000 rpm, spindle nose: BT-40, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with pallet changer on moving column (ROTOPALLET) with spindle line and spindle motor fully refurbished as new. CNC SIEMENS 840D. Tool magazine with 40 positions. Chip conveyor. High-pressure pump through the spindle. Spindle cooler. Remote electronic handwheel. Bjdpfxoydhyxe Amredh

Condition: used, Year of construction: 2008, turning diameter 310 mm turning length 600 mm control Sinumerik 810 D PL Siemens turning diameter over bed 425 mm turning speed range - main spindle 500 - 4.500 min/-1 max. Torque 280 Nm power capacity - main spindel 16,5 kW Spindle diameter 100 mm C-Axis 360 ° Bjdjtqmqhopfx Amrsdh chucking diameter 210-52 mm spindle bearing diameter 120 mm clamping cylinder 65 mm Bar feed max. 65 / (52) mm spindle nose A8 DIN 55026 x-axis 230 mm z-axis 740 mm rapid traverse X-axis 15 m/min rapid traverse Z-axis 24 m/min tool positions turret 12 pos. driven statition 12 pos. tool taper VDI 30 DIN 69880 Spindle speed driven tools 6.000 min -1 power capacity - driven tools 3,7 kW max. Torque 9,5 Nm dia. of quill MK 4 80 mm quill stroke 120 mm tailstock adjustment 475 mm tension force 500 daN weight of the machine ca. 4,2 t dimensions of the machine ca. 3,7 x 2,2 x 1,8 m CNC - Turning- and Milling Center SPINNER - TC 65 MC - Turret completely overhauld

Condition: ready for operation (used), Year of construction: 2000, operating hours: 27,218 h, spindle speed (max.): 3,600 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 930 mm, overall weight: 2,300 kg, controller manufacturer: HEIDENHAIN, controller model: TNC 410/426, positioning accuracy: 0.003 mm, swivel angle C-axis (max.): 360 °, number of axes: 3, This 3-axis SPINNER MT 500/1000 AT was manufactured in 2000. It features an X-axis travel of 210 mm, and Z-axis travel of 930 mm. The machine includes a robust table size of 520 x 900 mm with a load capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MT 500/1000 AT machine we have for sale. Contact us for further details. • Machine/Mechanic MT500-1000 • Travel X-axis: 210 mm • Travel Z-axis (Multifix holder + manual chuck): 930 mm • Travel Z-axis (Multifix holder + hydr. chuck): 930 mm • Travel Z-axis (Turret + manual chuck): 930 mm • Travel Z-axis (Turret + hydr. chuck): 930 mm • Travel C-axis: 360 degrees • Spindle clearance 45 mm with hydraulic chuck: 3600 rpm • Spindle clearance 57 mm with manual chuck: 3600 rpm • Tool system Haase quick-change holder: 1 tool unit • Tool system Turret VDI 30: 12 tool units • Ball screw pitch in X: 5 mm • Ball screw pitch in Z: 10 mm • Rapid traverse X: 15000 mm/min • Rapid traverse Z: 20000 mm/min • Feed rate X + Z: 0-4000 mm/min • Feed force X-axis: 1382 daN • Feed force Z-axis: 609 daN Bdodpfx Aoyxrndemreh • Tensile force hollow clamping cylinder: 145 daN/bar • Manual chuck Ø 200mm: 3 jaws • Hydraulic chuck Ø 210mm: 3 jaws • Coolant tank volume: 75 l • Coolant pump flow rate: 30 l/min • Coolant pump pressure: 1.4 bar • Max. positioning scatter: 3 µm • Max. backlash: 2 µm • Positioning uncertainty: 2 µm • Max. circularity error on workpiece:

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AB0702, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, controller model: FANUC 21 iMB, table load: 500 kg, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 530 mm Table clamping surface: 800 x 500 mm Bdsdpfx Aeya E Thomreh Spindle speeds: 60 - 8,000 rpm Spindle taper: SK 40 Spindle taper standard: DIN 69871 A Maximum table load: 500 kg Rapid traverse X/Y/Z-axis: 30 m/min Tool changer: 30 positions Tool diameter with full magazine: 80 mm Tool diameter with 2 free positions: 120 mm Maximum tool length: 250 mm Maximum tool weight: 7 kg MACHINE DETAILS Control: FANUC 21 iMB Total power requirement: 30 kVA Dimensions & Weight Machine dimensions (L x W x H): 2.4 x 2.2 x 2.46 m Machine weight: 4.5 t EQUIPMENT NC rotary axis with tailstock, manufacturer MECA-DIVIMEK (Spain), DCH 160 C 2 machine vices Coolant system

Condition: excellent (used), Year of construction: 2001, operating hours: 4,500 h, functionality: unexamined, machine/vehicle number: 090119, Manufacturing origin CE - Germany Voltage 400V Netweight 7500 kg Custom position 8458.91 20 Dimensions 2,9 x 2,3 x 2,3 m. 29731 hrs - work 4500h rs TECHNICAL DATA AXES Maximum travel X-axis 400 mm Bdsdpfx Amoht Hg Djrjh Maximum travel Y-axis 300 mm Maximum travel Z1-axis 475 mm Maximum travel Z2-axis 475 mm Relative positions B-axis 0,0001 – 360° Relative Position C1/C2-axis 0,0001 – 360° WORKPIECE Maximum cubic dimensions 80x80x80 mm Maximum weight 5 kg TURRET Number of stations 24 Number of controlled stations 18 Number of steady stations 6 Maximum tool attachment (round) Ø 20 mm Maximum tool attachment (square) 16x16 mm (20x20) Maximum trajectory of turret above tool’s point 500 mm Rotation speed of live tools 1-9000 min-1 SPINDLE Maximum rotation speed 6000 min-1 Maximum bars diameter Ø 42 mm Maximum forced chuck clamping 140 mm BARS MACHINING Maximum bar length for bar’s feed 1000 mm Maximum piece size for the bar taker Ø42 x Long.100 mm Maximum diameter of taker’s collets 42 mm Pulling and pressure force of clamping cylinder 20000N FEEDS X-axis advance force abt.895 daN Y-axis advance force abt.895 daN Z1-axis advance force abt.895 daN Z2-axis advance force abt.895 daN Fast moves axes X/Y/Z 20 m/min Motor’s torque of tool control 2,4 Nm Spindle S1 / Spindle S2 70Nm COOLING (values only as indication) Capacity of pump submerged inside chips conveyor 10 l/min for abt. 4,5 bar 80 l/min 3,2 bar 150 l/min 0,7 bar Capacity of overpressure pump inside conveyor 10 l/min 13,2 bar 50 l/min 9 bar 90 l/min 1 bar Lubricating coolant volume inside conveyor abt.134 L. Coolant volume inside cooling aggregate 45 L. NUMERIC CONTROL Siemens 840D MACHINING PRECISION Resolution axes X/Y/Z 0,1 µm Resolution axe B 0,0001° Resolution axe C 0,0001° Positioning precision 5 µm Repeatability 0,6 µm Maximum error on workpiece’s concentricity 0,5 µm ELECTRIC Spindle 1 / Spindle 2 (at 100%) 11 kW Spindle 1 / Spindle 2 (at 40 %) 15 kW Advance motors axes X/Y/Z1/Z2 1,3 kW Axis B 1,3 kW Tool control 2,3 kW Hydraulic pump 7,5 kW Hydraulic back movement 0,75 kW Cooling aggregate fan 1 / 2 0,18 kW Circulation pump of cooling aggregate 1,1 kW Compressor of cooling aggregate 2,2 kW Chips ejector 0,25 kW Emulsion pump 1 1,1 kW Emulsion pump 2 2,2 kW Operation tension 400 V Network frequency 50Hz (60option) Control tension 24V DC Absorbed power 35 kW Nominal current 63A Connecting réseau TM / TT / IT PNEUMATIC Maximum operation pressure 10 bar Normal operation pressure 6 bar Minimal operation pressure 5 bar Air output env. 150 L/min Valves tension 24V DC Oil-mist lubrication tank capacity 12 L Quality level 2 selon Pneurop6611 NOISE LEVEL Normal use 78—80 dB errors and omissions excepted-data given without obligation Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 live tool holders ER25 6 live tool holders ER20

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: AV0572, SPINNER TC800 with X=360mm, Z=900mm travel in a 45-degree inclined bed design with hardened and ground guide rails WITH driven tools WITH Y-axis Bodpfx Ajrbhd Nemrsdh POWER TURRET - WITH driven tool stations all tool stations can be driven on turret disks with a pitch circle or on the inner pitch circle designed as a servo turret Tool holder on the turret, System BMT65 Number of tool stations in the turret: 12 SPINDLE 1 in a version up to 3,400 rpm - 85mm As an integrated motor spindle, with water cooling in modern synchronous technology with a hydraulic collet chuck, bar capacity 85mm, speed range 0-3,400 rpm, Pmax 80 kW / 930Nm Spindle nose DIN55026/A8 FOOT SWITCH TAILSTOCK in the program, movable by connecting to the Z-axis, hydraulically clamped to the bed. With an additional integrated hydraulic quill and bearing for a fixed center. FOOT SWITCH DIRECT MEASURING SYSTEM in the X-axis Control system SIEMENS 840DE with the following basic scope: - SPINNER - SPIOS 24" touch operating panel for I4.0 applications - Operating panel with adjustable height, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point offsets - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL-WHEEL on the operating panel, integrating the following functions into a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the sequence -> all important functions of the setup mode integrated into one control element - SHOPTURN - 4-axis machining with a rotary axis - 3D SIMULATION of the finished part - REMNANT MATERIAL DETECTION - DXF reader CHIP CONVEYOR as a hinged belt conveyor, discharging to the right, incl. integrated coolant tank and conveying pump. HIGH-PRESSURE PUMP 15 bar CARTRIDGE FINE FILTER MEASURING PROBE for tool measurement in the working area incl. quick-change coupling STANDARD DOCUMENTATION in German consisting of a machine manual and CNC manuals is delivered in digital form on the control system. STANDARD PAINTING two-tone in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN system (5-conductor) Notes: The price includes warranty services only within Germany. In the case of new and demo machines, the pictures are not necessarily of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are only included in the scope of supply as listed in the technical description. Please ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: like new (used), Year of construction: 2024, Max. turning diameter: 400 mm Turning length: 650 mm Swing diameter: 600 mm X-axis travel: 275 mm Z-axis travel: 700 mm Bar capacity: 85 mm Main spindle: 3,400 rpm at 85 mm bore* Spindle nose: A8 / DIN A8 Chuck Driven tools: MC = Milling/driven tools Control system: Siemens 16-station BMT45 turret, axial - all stations driven Chip conveyor in the tailstock Bedjz E Dcnspfx Amredh High-pressure pump, 15 bar Siemens Sinumerik One Measuring probe for tool measurement in the work area Direct measuring system in the X-axis Automatic door system

Year of construction: 2002, condition: excellent (used), machine/vehicle number: ACO 122, table mounting size: 600 x 1300 mm movements x/y/z: 810/580/560 mm spindle taper: SK 40 ISA spindle turning speed range: 8000 rpm number of tool positions: 40 pieces carriages: 24000 mm/min spindle drive: 25 kW electrical connection: 380/400 V kW space needed: 3200 x 2500 x 2900 mm weight: 9000 kg Bsdpfoftt Sfex Amrsdh

Year of construction: 2001, condition: excellent (used), Control SIEMENS Swing over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 rpm Bsdpfx Amjlawakeredh tailstock multifix Accesories

Condition: used, Year of construction: 1997, x-travel 650 mm y-travel 500 mm z-travel 530 mm control Siemens type 840D Shopmil table surface area . mm size of pallet 800x500 mm workpiece weight . kg Tool changer 24 Fach spindle taper ISO SK 40 turning speeds 60-8000 U/min feed 30 m/min weight of the machine ca. 5 t dimensions of the machine ca. 4000x5000x3000 mm Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Bdodpezdcbkefx Amrjh Your Markus Hirsch Team