Used Spin for sale (1,458)

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 4 [mm] Dodpfxjzzfk Io Albjwb - Travel : 24 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1580 x 1100 [mm] - Machine height : 1505 [mm] - Machine weight : 800 [kg]

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 318 mm, feed length Y-axis: 51 mm, feed length Z-axis: 584 mm, number of spindles: 2, spindle speed (max.): 4,500 rpm, spindle bore: 51 mm, Equipment: cooling unit, documentation/manual, The DS-30Y Y-axis turning center combines turning with two spindles, a Y-axis, a C-axis, and powered tooling to create a powerful “one-hit” solution for any workshop. Milling, drilling, and off-center threading can be enhanced for increased machining capabilities. It comes standard with a 12-station BMT65 turret and a synchronized C-axis for versatile 4-axis capabilities. Counter spindles support fully synchronized rotation and enable workpiece transfer during operation to reduce cycle times. Spindle | CHUCK-10"-A2-6 4.8K-20HP-A2-5-DS | CHUCK-8.3"-A2-5 LT-BMT65-12 Live Tooling 4000 rpm CONVEYOR ATP Automatic Tool Presetter PCAT Part Catcher Dwedpfx Aljzvy D Eobsb HPC High-Pressure Coolant CABCOOL NGC | 1GB, ETHERNET, WIFI, EPFDM SO, MACRO, RTAP, 8M

Condition: good (used), Year of construction: 1993, functionality: limited functionality, power: 11 kW (14.96 HP), spindle diameter: 30 mm, total length: 2,600 mm, Planed cast iron table Table length 2600 mm Motorized height and swivel adjustment Swivel range -5° to +45° Feed unit 4 speeds 3/4/6/9000 rpm Adjustment range of the milling cutter arbor 150 mm Aigner stop jaws Dwjdpfxszp I Eke Albjb The machine is in very good condition Motor brake defective Digital display defective

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Manual steel support - length mm 450 Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Special equipment built into the machine Dsdpsvcfhmofx Albewb - Center height mm 400 - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: used, Year of construction: 1981, Second-hand machine Year of manufacture: 1981 Features and technical specifications: - with dual pneumatic lifting spindle Dedpfx Alszk N Dqsbowb - Mandrel diameter: 40 mm - with a long table length: 2500 mm - with extendable frame support - with milling stop featuring Panhans metal stop jaws and fine adjustment Availability: at short notice Location: Röllbach

Condition: good (used), Year of construction: 1987, functionality: fully functional, center width: 825 mm, center height: 350 mm, spindle motor power: 7,500 W, total length: 2,800 mm, spindle speed (min.): 300 rpm, spindle speed (max.): 2,500 rpm, quill diameter: 60 mm, quill stroke: 500 mm, total height: 2,200 mm, total width: 2,000 mm, overall weight: 3,500 kg, product height (max.): 3 mm, feed force X-axis: 2,800 N, feed force Z-axis: 2,800 N, feed length X-axis: 250 mm, feed length Z-axis: 450 mm, feed rate X-axis: 6 m/min, feed rate Z-axis: 6 m/min, The machine is located in our warehouse. It is connected and can be tested at any time. Djdpfxjxfiq Ho Albowb

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 21.500 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° Dsdpfx Aezqt Umjlbswb C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Dwjdpfey Nm Erjx Albob Specification: - Equipped with 1 vertical and 2 horizontal milling motors - Pneumatic workpiece clamping with 2 horizontal clamping cylinders - 3 pneumatic spray nozzles - Milling area of the vertical motor (L x D): 365 x 230 mm - Milling area of the horizontal motors (L x H): 250 x 100 mm - Maximum profile height: 150 mm - Operation via switches and 4 hand levers

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: Automatic height and swivel adjustment of the spindle with decimal pulses Mechanical display of spindle height and electrical display of tilt adjustment Hinged hood with aluminium guides Adjustable table top opening via table slide System for quick tool change with long tables and extendable workpiece support Djdszk Nq Ropfx Albjwb Table size 2500 x 780 mm Spindle adjustment – 45° to +45° Spindle diameter 30 mm Spindle stroke 230 mm Max. table opening: 300 mm 5.5 kW motor with automatic star-delta start with clockwise and anti-clockwise rotation Speeds: 3000/4500/6000/8000/10000 rpm Electronic programming of spindle height, spindle tilt and stop position (milling stop) Extraction at top and bottom: 120 mm Dimensions 2570 x 1450 mm Weight approx. 670 kg Availability: at short notice Storage location: Röllbach

Condition: excellent (used), CATALOGUE NUMBER 8005 TECHNICAL SPECIFICATIONS - Number of spindles: 21 pcs - Distance between the outermost spindles: 640 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 870x560 mm - Height to the table surface: 900 mm Dwsdpfx Aljzr U Ecjbob - Stroke of the feed cylinder: 65 mm - Vertical/horizontal and angled drilling adjustment - Drilling head adjustment, pneumatic - Main motor: 1.5 kW - Dimensions (L/W/H): 1000x1150x1240 mm - Weight: 370 kg ADVANTAGES – 21 spindles – drill bit mounting with quick-release fittings – Vertical, horizontal, and angled drilling – Unpainted – Used drilling machine, very good condition Net price: 7900 PLN Net price: 1880 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2017, x-travel 550 mm y-travel 2.000 mm z-travel 550 mm Dsdpfx Aszwg Utjlbewb Control Siemens number of spindles 4 Stück Pneumatics 5,5 bar weight of the machine ca. ca. 28 t The machine has undergone an extensive overhaul. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Dwjdozk N Sbjpfx Albjb Features and technical specifications: - Control display on the upper control panel - Control panel can be swivelled and extended - Swivelling milling spindle - Swivel range of the milling spindle: +/- 45° - Milling spindle stroke: 150 mm - HSK80 quick-change milling spindle system - Milling arbor 30 mm - Electromechanical spindle locking mechanism - Frame support 1,340 mm at the machine table, extendable by approx. 700 mm - Table extension on the right - Table extension on the left - 2-axis positioning control for height and swivel adjustment, digital LED displays - Voltage 400 V / 50 Hz - Power socket - Automatic motor start via contactor control - 7.5 kW main motor, frequency-controlled / continuously variable speed control - Milling stop type 203 with handwheel adjustment on both sides - Centrex Type 1624 milling protection and clamping device - ZEROMASTER reference dimension setting device - Wegoma Variomatic 4N feed unit: 4-roller feed unit Variable feed speed 2–18 m/min Clockwise and anti-clockwise rotation Suitable for both horizontal and vertical use Memo-Lock system for easy swivelling and repositioning Digital height display Height adjustment from the operator’s side Generously sized locking levers Maximum reach 1,050 mm thanks to extended tube - Dimensions: 260 x 180 x 130 cm - Weight: approx. 1,100 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Dodpszyy Dtjfx Albowb Equipment and technical data:

Condition: excellent (used), CATALOG NUMBER 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs Dodpfxjzr U Dlj Albjwb - Number of vertical spindles: 1×20 pcs - Distance between the outermost spindles: 610 mm - Distance between spindles: 32 mm - Feed cylinder stroke: 60 mm - Max length of workpiece: 3400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently - Right/left drill bits, threaded mounting (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6-8 bar - Dimensions (L/W/H): 4600x1180x2200 mm - Weight: approx. 1500 kg Net price: PLN 12,900 Net price: EUR 3,070 depending on exchange rate, reference 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: used, Year of construction: 1984, Second-hand machine Year of manufacture: 2007 Features and technical specifications: - Motor 4.7/5.7 kW, pole-changing - with clockwise/anti-clockwise rotation - MK 5/30 mm milling arbor - Height adjustment via handwheel - Speeds: 3000/4500/6000/9000 rpm - Milling stop with metal jaws Mounted on a round turntable and therefore rotatable through 360° - with table extension on both sides, featuring extendable frame supports - with a roller table attached to the left-hand side Please note! The table extension was fitted at a later date! To use the roller table, it must this must be removed again! - with 4-roller feed mechanism, built in 2007 - Dimensions: 240x65x120 Dsdpjzk N R Rofx Albjwb - Weight approx. 900 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Dsdpfxsztxt Hs Albowb Key technical data: - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm - Weight: approx. 300–320 kg depending on the version - Dust extraction port: approx. 120 mm at the router fence No warranty.

Condition: used, Year of construction: 1999, total length: 1,000 mm, total width: 2,040 mm, total height: 1,710 mm, Colour: Grey Empty weight: 900 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 126-02049 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 1990 - Max. tool diameter milling head [mm]: 180 - Feeding device present: Yes - Brand: Holz-her - Number of wheels [pcs]: 3 - Number of speeds: 2 - Voltage [V]: 380 - Current consumption [A]: 12 - Power [kW]: 6.2 - Transport dimensions: 1000mm x 2040mm x 1710mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information Djdpewnigcjfx Albjwb VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - rigid milling spindle; newly bearing-mounted - with table extension with extendable frame support 2500 mm - motor 5.5 kW - speeds 3000/4500/6000/8000/10000 rpm - milling fence with 2 adjustment options: - full fence - rear outfeed jaws - extraction hoods: 2 x 120 mm - automatic motor brake - clockwise/counter-clockwise rotation - with Haffner feed unit with 4 rollers Dsdpfx Alszlbpusbowb Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 2001, total length: 1,700 mm, total width: 1,000 mm, total height: 2,100 mm, Colour: Grey Dsdpfeymlahox Albowb Price: On request - Details: - └ Description: Readout positioning does not work properly. Price AS-IS - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/143039 - Spindle diameter [mm]: 40 - Table length [mm]: 1195 - Table width [mm]: 350 - Feeding device present: Yes - Guide present: Yes - Tool key included: Yes - Spindle speed: Manual - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 20 - Transport dimensions: 1700mm x 1000mm x 2100mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, machine is unused Features and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Useful length of the spindle: 125 mm - Spindle mandrel diameter: 30 mm - Speed display: LED display on the front of the machine - Max. tool diameter (standard): 240 mm - Maximum tool diameter that can be lowered: 230 mm - Maximum tool diameter for profile milling: 240 mm - Maximum tool diameter for tenon milling: 320 mm Dodpfxjzk Nn As Albswb - Work table length: 1,200 mm - Work table width: 530 mm - Table height: 900 mm - Slide carriage length: 1,200 mm - Slide carriage width: 360 mm - Slide carriage height: 142 mm - Extraction nozzle diameter: 2 × 120 mm - Drive motor power: 5.0 kW - Mains voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: at short notice Storage location: DE-63934 Röllbach

Condition: good (used), Year of construction: 2004, Number of spindles: 8 Maximum bar feed in one station: 130 mm Maximum bar feed in two stations: 260 mm Maximum stroke of radial slide: 52 mm Adjustment of radial slide: +/- 12 mm Maximum stroke of axial slide: 72 mm Maximum stroke of tool spindles: 106 mm Adjustment of tool spindles: +/- 10 mm Speed of main spindles: 500 - 4,000 rpm Cycle time: 2 - 80 s Dodpew Rfcdjfx Albewb Number of tool positions: 18 Weight: 12,600 kg Bar loader: PIETRO CUCCHI (standard)

Condition: used, Year of construction: 1987, Second-hand machine Year of manufacture: 1987 Condition: fully overhauled Features and technical specifications: - Table dimensions 1100 x 760 mm - Motor 4.7/5.7 kW, pole-changing - with clockwise/anti-clockwise rotation - MK 5/30 mm milling arbor - Height and swivel adjustment via handwheel - Speed settings: 3000/4500/6000/9000 rpm - Swivel range of the milling spindle – 5 to +45° - Milling stop with metal jaws - mounted on a round insert plate and therefore rotatable through 360° - with table extension on both sides, featuring extendable frame supports - with 4-roller feed mechanism Weight approx. 900 kg Djdpfxszk Nzie Albowb The images show the machine in its pre-refurbishment condition Availability: approx. 4 weeks after order placement Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2011, The grinding machine is in very good condition and fully operational. Djdjyuyucspfx Albjwb

Condition: excellent (used), CATALOG NO. 7911 TECHNICAL DATA - Number of spindles: 29 pcs - Distance between outermost spindles: 900 mm - Spindle pitch: 32 mm - Table surface: 700x1220 mm - Table height: 930 mm - Pneumatic clamps: 3 pcs - Drilling vertically, horizontally, and at an angle - Vertical/horizontal operation – pneumatic table adjustment - Pneumatic lifting of drilling head - Dimensions (L/W/H): 1400/1050/1400 mm - Weight: 744 kg ADVANTAGES – Manufactured by Italian brand SCM – For 29 drills – Not repainted – Very good condition – Used drilling machine Net price: 5,900 PLN Net price: 1,400 EUR at an exchange rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations) Dwodpszwpaxjfx Albjb

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed Dwedpfx Alszt Ai Esbsb very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation