Used Spare Parts List for sale (20,524)

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 272 mm -Holes: Ø 24 mm Chsdpfx Agewyvbwored -Dimensions: see photo technical drawing -Dimensions: 300/125/H50 mm -Weight: 8.9 kg

Condition: used, Belt Conveyor, Belt Conveyor System, MFP Conveyor Technology Machine No.: 17565 Year of Manufacture: 2018 Usable length: 3100 mm Belt width: 600 mm Belt length: approx. 6400 mm Frame profile height: 35 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 45 m/min Conveyor height: approx. 1120 mm Motor power: 140 Watts Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via potentiometer on ROFRE frequency inverter, type 897 - Reversible operation (right/left running) - Belt drive via INTERROLL drum motor - Stable sheet steel construction with closed steel plate under the conveyor belt - 1 piece height adjustable subframe HAACON with hand crank, conveyor height approx. 950 to 1150 mm - HAACON subframe mounted on steel plate, length 750 mm x width 500 mm x thickness 30 mm - 1 fixed support foot without height adjustment as transport support Chsdpfxewrihne Agrod - Fully mobile on fixed castors Overall dimensions L x W x H: 3180 x 760 x 1150 mm Weight: 250 kg Good condition

Condition: good (used), Various measurement cards & racks from NI available, see listing: To be sold completely or in parts Photos are exemplary Csdpfx Aewpgy Aegrehd NI PXI-1045 189105K-01L 2 units NI PXI-2569 100 SPST Relay Module NI PXI-6528 Isolated Digital I/O NI PXI-4072 6 1/2 digit FlexDMM NI PXI-2532 512-Crosspoint Matrix 2 units NI PXI-6251 M Series Multifunction DAQ NI PXI-8331 MXI-4 2 units NI PXI-6232 M Series Multifunction DAQ 10 units NI PXI-1031 90871D-01 Rev1.1 NI PXI-8196 Embedded Contr 191435B-712 without Expresscard NI PXI-6229 M Series Multif DAQ 191332B-11 191334A-11 NI PCI-6527 185681D-01 NI PCI-GPIB IEEE488.2 188513E-01L SCB-68 182469-01 terminal board TBX-68 83420 DAQ Termination Board 3 units SCXI-1331 184268C-01 Rev. 3.1 2 units Cable 188841B-02 SH37F-SH37M-2 10 units See also my other test and measuring equipment. We also buy.

Condition: used, Year of construction: 1909, 3D Systems ProCure 750 Used to cure 3D-printed parts in an automotive manufacturer's development department. All the lights are lit and the turntable is rotating. Chjdpfxev Upuuj Agrod

Condition: new, functionality: fully functional, DEMAG cable guide for DH P lifting mechanism Significantly below the manufacturer's list price, 25% discount Info: 20,000 DEMAG spare parts and components in stock! DEMAG parts warehouse Chodpfx Agov Uvp Eersd Also, check out my other offers.

Condition: new, Year of construction: 2025, Economical blister machine with a quick format change unit for more flexibility. Universal feeder for handling of almost all types such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes. Adjustable sealing pressure for different product requirements. The machine is additionally equipped with a film waste material trimming cutting device which allows production runs of approximately 90 minutes. Integrated camera inspection systems (pinhole detector, BASLER color camera) automatically eject defective blisters and ensure the quality of the blister packs. Two holding devices for two blister film rolls and the integrated blister film splicer increase efficiency during material changeover. The length of the final blister is adjustable by software. Including water chiller system, 1 x aluminum format set with dedicated feeder, aluminum/PVC format set with brush feeder, print mark detection unit. - Specifications: sealing principle: platen sealing; max. format area (index x width): 245 x 152 mm; max. forming depth: 12 mm; processable forming materials: Al, Al/PVC; max. speed of the machine in neutral: 20 cycles/minute; Al/Al 40 cycles/min, Al/PVC 70 cycles/min (corresponds with 57x80 mm Al/PVC blister: 280 blister/min); number of lanes: customized; max. roll diameter forming film: 600 mm; power consumption: 9.6kW; machine dimensions: 4800×740×1700mm; weight: 2200kg. Chodov Nkvcopfx Agrjd Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport Chodjwb Hxvspfx Agrod - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold Csdpfx Aswugczjgrehd 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Metal cabinet, workshop cabinet, locker cabinet Compartment locker with 20 individual lockable compartments Width: 1200 mm Depth: 520 mm Height: 1850 mm Compartment size (W x D x H): 260 x 480 x 300 mm Bottom row compartment size (W x D x H): 260 x 480 x 280 mm - Fitted with key lock, each compartment with its own key - Colour: Silver Weight: 116 kg Csdpfx Agjx N Ikpjrshd Good condition

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Lista, workbench with vise / solid construction with drawers -Worktop: 1500/700/H850 mm -Drawers/Cabinet door: lockable, without key / Layout/height see photos Codpfx Agexz Aa Tjrehd -Vice: Heuer Front, height-adjustable and rotatable -Clamping jaws: 180 x 30 mm, clamping range 235 mm -Transport dimensions: 1500/950/H1120 mm -Weight: 139 kg

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. Reversible Plate Compactor MS125 TECHNICAL DATA Model: ETP65-2 Engine: Petrol, LONCIN Engine type: G200F Power [kW/hp]: 4.8 / 6.5 Weight [kg/lbs]: 65 / 143 Vibrations per minute: 5400 Centrifugal force [kN]: 10 Codpfxsyk T Hkj Agrohd Compaction depth [cm/in]: 20 / 8 Forward travel speed [cm/s/in/s]: 40 / 16 Theoretical performance [m²/h/ft²/h]: 450 / 4800 Plate width [cm/in]: 50×36 / 20×14 Dimensions [cm/in]: 108×40×80 / 43×16×31 12-month warranty; after this period, we continue to provide all spare parts and professional service as needed. PRICE: €800 net €952 gross

Condition: used, Conveyor belt, belt conveyor, belt feeder, MTF belt conveyor Year of manufacture: approx. 2015 Usable length: 2300 mm Belt width: 320 mm Belt length: approx. 4750 mm Frame profile height: 32 mm Return roller diameter: 25 mm Belt speed: 25 m/min to 50 m/min Conveyor height: approx. 950 to 1350 mm Motor power: 0.25 kW Power supply: 230 Volt, 50 Hz Codpfxex R Eh Is Agrehd - Infinitely variable belt speed via ABB frequency inverter, type ACS150-03E-01A2-4 - Belt drive via RGM geared motor - Two-piece belt body made of aluminium profile with 8 mm slot - Belt body made of aluminium profile with stainless steel sheet cladding - 1 height-adjustable base with quick adjustment, mobile on 4 fixed castors - Conveyor belt was extended by approx. 1000 mm at some point. The lateral connecting rails are somewhat unstable Overall dimensions (L x W x H): 2350 x 500 x 900 mm Weight: 63 kg

Condition: new, PRICE: 1650 EUR Manual dough divider Ability to work in any environment Blades made of stainless steel Divide the dough completely, non-sticky Disassembling the desk Dimensions: 370×590×1160mm Dough weight: 30-180 g/pc Chsdeuuc Ahjpfx Agrsd Capacity: 36 pcs Weight: 125 kg

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Cabinet Parts Washer The MP160 Cabinet Parts Washer is a modern cleaning system designed for intensive cleaning of industrial and automotive components in a closed-loop system, using high temperature and pressure. With an operating pressure of 5–8 bar and the ability to heat the cleaning solution up to 70°C, the machine effectively removes carbon deposits, oil, grease, and other stubborn contaminants, even from hard-to-reach areas and components with complex geometries. Key Features of the MP160 Chsdpsuc Tn Ajfx Agrsd Operating pressure: 5–8 bar – ensures effective removal of stubborn contaminants from parts with complex shapes and intricate geometries. Heated cleaning solution up to 70°C – improves detergent performance and reduces cleaning time. Dual-function spray gun – allows operation with compressed air only or with a mixture of air and cleaning fluid, while also enabling efficient drying of cleaned components. User-friendly control panel – provides convenient operation with independent control of the power supply and heating system. Pressure gauge – allows continuous monitoring of operating pressure. Compact steel construction – designed for regular use in workshops, service centers, and industrial facilities. Machine Construction The MP160 is built for intensive operation in workshop and industrial environments. Its compact dimensions of 770 × 600 × 1330 mm allow convenient placement next to the workstation while providing ample space for cleaning small and medium-sized components. The 8–14 L cleaning solution tank enables economical use of detergent. Adjustable leveling feet ensure stable positioning, while the integrated pressure gauge provides constant monitoring of operating pressure. Precision and Performance The MP160 is designed for thorough cleaning of components with complex structures, including turbochargers, valves, covers, housings, and hydraulic components. Its pressurized spray system directs the cleaning solution into narrow gaps, channels, recesses, and other difficult-to-access areas. After the cleaning cycle, components can be blown dry with compressed air, helping remove residual cleaning fluid and preparing parts for assembly, inspection, remanufacturing, or other service operations. Applications The MP160 Cabinet Parts Washer is ideal for: Mechanical workshops Component remanufacturing facilities Service and repair centers Tool rooms Maintenance departments Manufacturing plants It can be used for cleaning: Turbochargers Valves and valve bodies Covers and housings Engine and transmission components Hydraulic system components Industrial machine parts Workshop tools and equipment Components made of steel, cast iron, and other materials compatible with the selected cleaning agent Standard Equipment Dual-function spray gun for cleaning fluid application and compressed air blow-off Heated cleaning solution system Control panel Operating pressure gauge Adjustable leveling feet Technical Specifications Cabinet Capacity 160 L Maximum Detergent Temperature 70°C Cleaning Solution Tank Capacity 8–14 L Operating Pressure 5–8 bar Dimensions (W × D × H) 770 × 600 × 1330 mm Weight 47 kg

Condition: good (used), Manufacture: ALLOYD Tip: 4 seec Chjdpfouhn Diex Agred Turntable

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: CD1500, CD-1500 VEGETABLE FRUIT DICING MACHINE This cutter is designed for slicing, dicing, and cutting fruits and vegetables Cedpfx Asvlwlcsgrehd like potatoes, carrots, and beets into strips, slices, or cubes. Interchangeable cutting tools allow you to select the shape and size of the cut pieces, ensuring uniform results. Additional tool sets are available for smaller or larger cuts if needed. Vegetables and fruits are fed manually into the hopper, and the cut pieces are discharged into a receiving bin.

Condition: defective spare-parts repository (used), functionality: not functional, power: 6.62 kW (9.00 HP), fuel type: gasoline, color: orange, empty load weight: 175 kg, Year of construction: 1995, Marking machine: + Hofmann + H8-1 Chodpswkf Etefx Agred + Year of manufacture 1995 + 175 kg + 9.0 HP Honda engine + Engine + Compressor OK + Spare parts carrier Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area • Longitudinal X-axis travel: 190 mm • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Codjwkpzlspfx Agrohd Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Axes • Working feed: 0 - 2 m/min • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 268 mm -Groove width: mm -Dimensions: see photo technical drawing Cedpov Sqmtsfx Agrshd -Dimensions: 285/85/H180 mm -Weight: 10.8 kg

Year of construction: 2026, condition: new, functionality: fully functional, ROTARY CUTTER RC250 The Rotary Cutter is built for fast, precise shredding in demanding kitchens and processing plants. From root vegetables to fruits, it turns raw produce into uniform filaments in seconds. A two-dimensional centrifugal cutting system keeps the thickness consistent, while the 304 stainless-steel The body ensures durability and hygiene. Separate drive and cutting chambers Chjdpfjx Sdruox Agrod reduce contamination risk and ease maintenance.

Condition: new, Year of construction: 2026, functionality: fully functional, HM-60 HORIZONTAL MIXING MACHINE This highly versatile machine is designed to excel in a wide range of applications, making it perfect for mixing various products such as salads, meat products, and even powders. With its robust and durable Chjdpfx Agsx Sxf Nered paddles, you can rely on this equipment to consistently deliver uniformly mixed ingredients, guaranteeing high-quality outcomes.

Condition: good (used), Year of construction: 1998, Plastic parts Year of manufacture approx. 2005 Codpfxox Hkq To Agrjhd 8x Caviete

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses Csdpfxoxwvruj Agrohd - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: new, Precision cycle lathe with Siemens Sinumerik 828 D control Chodpexy Rw Refx Agrsd Manufacturer: GDW Model: C 400 Z conturline with quick-change tool holder size B Condition: Brand new machine Meets the highest safety standards Standard equipment includes: - LED tube work light - Electromechanical holding brake for the main spindle, programmable or switchable via push button on the operator panel - Coolant system - Quick-change tool holder size B, incl. one turning tool holder size B - Reducing sleeve for main spindle internal taper ME 70 / MK 4 - Protective flange for spindle head DIN 55027-6 - 2 fixed center points MK 4/5 - Set of operating tools with tool bag, set of keys, grease gun - Operating manual with spare parts lists, electrical documentation in print and on CD

Condition: new, Precision cycle lathe with Siemens Sinumerik 828 D control system Brand: GDW Model: C 280 Z conturline with quick-change tool holder size B Condition: New machine Built to the highest safety standards Standard equipment includes: - LED tube light - Electromechanical holding brake for the main spindle, programmable or operable via push button on the control panel - Coolant system - Quick-change tool holder size B, including one turning tool holder size B - Reducing sleeve for main spindle internal taper ME 50 / MT 3 - Protection flange for spindle head DIN 55027-5 - 2 fixed center points MT 3 - Set of operating tools with tool bag, set of keys, grease gun - Operating manual with spare parts lists, electrical documentation in paper and CD format Codoxy Ryfspfx Agrjhd