Used Soil Treatment Plant for sale (3,983)

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Ncedpexx Tigofx Ad Njl Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: good (used), Year of construction: 2020, operating hours: 881 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding funnel with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Nsdpfxjvnmmze Ad Nscl Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the roller Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Ncedpfxoxx N T Ij Ad Nol Delivery date to be arranged

Condition: good (used), Year of construction: 2020, operating hours: 590 h, functionality: unexamined, Equipment: Methor chain basic package Ncsdpfxjvnq Rko Ad Nel Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min 24 V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, Year of construction: 2021, operating hours: 200 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Ncsdsvnq Trepfx Ad Nsl Crushing system size L (8 teeth) Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning Njdpjxx N Dgjfx Ad Nscl - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: good (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, Equipment: Methor "hook lift" basic package - 24 V electric control - maintenance-friendly engine compartment with LED light Njdpfxjvrw Tmo Ad Necl - folding hopper with position sensor and automatic control - hydraulically reversible fan wheel - acoustic start-up warning - paintwork: RAL 2011 deep orange Additional equipment: Hook lift in accordance with DIN 30722-1 (Germany) Crushing system size L (8 teeth) Three-phase motor 200 kW-EUROPA + electric pump Radio system hook lift large Rear conveyor 6.9 m Frame for overband magnet Overband magnet Additional hydraulic connection 70 l/min

Condition: ready for operation (used), Emulsion Treatment System, Knoll 320 s-1/200, FKA/950, Used Machine Manufacturer: Knoll Type: FKA/950 Chip Conveyor: 320 s-1/200 Year: 2015 Key Features: High-quality German industrial technology Robust and reliable design Efficient filtration for cooling and lubricating fluids Ideal solution for central or local filtration systems Application Areas: Mechanical engineering Metalworking Fluid management for CNC machines and production lines Ncsdpswmmvrjfx Ad Nel Cleaning of cooling and lubricating emulsions

Year of construction: 2004, condition: good (used), ATMOSPHERIC HEAT TREATMENT LINE (NITROGEN/METHANOL) comprising 3 high-temperature furnaces, 2 tempering furnaces at 450 °C, 1 industrial washer, 1 automatic loader, electrical cabinets, and a storage magazine. Ncodeyc Sm Tjpfx Ad Njl

Condition: used, Year of construction: 2007, Overview The machine was built in 2007 by Spanish company Seppelec. The machine is still assembled but not in use since the factory closed the production. Before decommissioning, the machine was intensively maintained and tested with phosphorescent material.   Techn. Details Capacity: 13,500 l/ h Pressure to prevent degassing: 7 bar Temperature while pasteurizing: 85°C Machine documentation Heat exchanger plate | SPX Flow | H17 | 2013 Control: Siemens S7-300 Cpu 314 2dp Communication port type: Profibus Ncjdpfx Aoq T Ak Hjd Nsl

Condition: used, Year of construction: 2008, 2008 | Wirtgen Wr 2400 | Used Soil Stabilizer 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 79000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 21 inspection points 18 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine was operational, and all functions worked during the inspection. However, the sprayers did not operate as there was no water in the reservoir. The Mercedes engine is in good working condition. The machine has been heavily used, which is visible in certain areas. The deck is getting thin, and there is a significant weld on the main boom. There is a lot of concrete buildup inside the machine, including on the computer, dashboard, and other components. Lubrication is in good condition. There is considerable rust on the cab, and the cab shifting mechanism is not functioning because the cab is out of its rolling rail. The machine requires a thorough cleaning. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38549 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Nsdpfx Adoycy Das Nscl We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 200 kW (271.92 HP), Boost your waste wood processing efficiency with this Komptech CRAMBO 5200 E direct, a robust industrial shredder renowned for its high throughput and reliability. Manufactured in 2016 and in used condition, this model features a powerful electric drive, delivering consistent performance with low operating costs and noise levels. The integrated Multistar 2-SE star screen ensures precise material separation, complemented by a swivel conveyor and overband magnet for enhanced sorting and metal removal. Complete with control cabinets, this shredder is ideal for operations seeking advanced processing capabilities and maximum productivity. Don’t miss the opportunity to upgrade your plant with this proven solution from Komptech. Ncjdpfxexv Acqj Ad Nel

Year of construction: 2021, condition: good (used), Motor output 7,5 kW Ncedpfx Adsxzuxbs Nol Overall size ca. (L x B x H) 1.935 x 6 mm Weight ca. 447 kg Receiver 500 L Max. pressure 13 bar

Condition: excellent (used), Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, Bosch CHP Complete System (1 Set) – CHP CE 140 N (Year 2016) including Cabero Heat Exchanger/Dry Cooler (Year 2017) For sale is 1 complete, homogenous CHP unit consisting of 1× Bosch CHP Module CE 140 N (gas-powered CHP) including the corresponding peripherals as well as 1× Cabero heat exchanger/dry cooler. The unit is operational and in very good condition. Sale only as a complete package. 1) CHP / CHP Module Manufacturer: Bosch KWK Systeme GmbH Model: CHP CE 140 N Year of manufacture: 2016 Engine: MAN 2867 E 218 (gas-powered Otto engine) Performance data (CE 140 NA / typical as per datasheet series): Electrical output (nominal, 90/70°C): 70 – 140 kWel Thermal output (nominal, 90/70°C): 106 – 212 kWth Gas input: 192 – 384 kW Modulation range: 50 – 100 % Net efficiency: electrical 36.5 %, thermal 55.2 %, total 91.7 % Power supply: 400 V / 50 Hz, 3-phase Own energy consumption (electrical): 2,500 W Max. operating pressure (heating circuit): 6 bar Acoustics / emissions (CE series): Module noise level: 71 dB(A) NOx (dry, 5% O₂): ≤ 0.250 g/Nm³ CO (dry, 5% O₂): ≤ 0.300 g/Nm³ Dimensions (CE 140 NA – indicative values): Width W ≈ 1,160 mm Length L ≈ 3,850 mm Required room height min. ≈ 2,900 mm Wall clearance A > 900 mm 2) Cabero Heat Exchanger / Dry Cooler (1 unit) Manufacturer: Cabero Designation / Item No.: GCDD099MB-2X7-64-S D (EB) EC AXI A Version / Standard: PED / DIN EN 14276-2:2011 Year of manufacture: 2017 Heating surface: 2,742.65 m² Medium: Ethylene glycol 34% / Water 66% Fluid Group: 2 Max. allowable pressure (PS): 12 bar Test pressure (PT): 17.16 bar Nedpfsycl Absx Ad Necl Permitted temperature range (TS): −40 / +60 °C Volume: 439.5 L Pressure test date: 03./04.07.2017

Condition: used, Year of construction: 2021, MARINI-ERMONT TSM17 asphalt plant drum tube: Drum thickness: 10mm, Cone thickness: 12mm, Large end diameter: 2,100mm, Drum diameter: 1,700mm, Length approx. 11,000mm, 2 bearing rings, Radiation-proof blades in A42CP steel, Curtain blades: HARDOX 400, Recycling ring, Burner face, 4 gear motors IE3 standard + rollers. The tube was commissioned in January 2022 and decommissioned in November 2023. Nedpfxoxf T Ucj Ad Nscl

Condition: used, Year of construction: 2000, Storage location: Nattheim Ncsdpfxsvwdmwe Ad Nel

Condition: good (used), functionality: fully functional, Hard rock splitting plant - essentially consisting of: Feed hopper SVEDALA H-36 cone crusher Dosing hopper SANDVIK H-200 cone crusher plant, with pre-screening machine Dosing hopper with discharge belt 2 x double deck screening plants approx. 1,700 x 3,000 mm and approx. 1,200 x 3,500 mm various conveyor and stockpiling belts Complete electrical installation with control cabinet in container Ncsdjufih Djpfx Ad Nsl

Year of construction: 2022, operating hours: 200 h, condition: like new (used), functionality: fully functional, The AirBasic is a portable machine for separating light and heavy components of various bulk materials. The machine is in as-new condition and has seen very little use. Operating instructions and data sheets are available as PDF files. Nodpfx Adsyddazs Nscl

Condition: new, Year of construction: 2022, operating hours: 1 h, machine/vehicle number: 268955558, GREMAC e1 trommel screen Tandem chassis / axles 2x kg ( permissible total weight) kg empty weight without aggregate Overrun brake Vehicle lighting according to StVzO TÜV acceptance Drum length: mm Diameter: mm 4,0 kW electric drive speed adjustable with frequency converter driving screw adjustable cleaning brush hopper with conveyor belt rubber belt with chevron profile 0,75 kW electric drive speed adjustable with frequency converter Fine grain collecting belt Movable suspension Rubber belt in smooth design 1,5 kW electric drive Speed adjustable with frequency converter Fine grain belt Movable suspension Rubber belt with chevron profile 2,2 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Over-grain stockpile conveyor Movable suspension Rubber belt with chevron profile 1,5 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Control system PLC Siemens Logo Control panel with buttons and potentiometers 400V load circuit 24V control circuit Main switch Ceekon 16A socket EMERGENCY OFF relay Without generator Cladding Hot galvanized frame parts painted drum cladding powder coated in RAL7005 and 5018 Further information Ncodpjl Hbcfjfx Ad Njl Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: used, Year of construction: 2008, operating hours: 2,146 h, * Wirtgen W 35 DC asphalt milling machine * Year of manufacture: 2008 Nodpoyc Rkwofx Ad Njcl * Operating hours: 2,146 h * Hydraulic conveyor belt * Milling width: 35 cm * Weight: 4,550 kg * Power: 42.5 kW * More photos and videos available via WhatsApp * Information provided without guarantee; subject to prior sale.

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Nodpfx Aowcwbqsd Necl

Condition: used, color: orange, Warranty: 24 months Productivity: 100 tph Polygon can produce mobile or fixed asphalt plants with capacities of 60-240 tons/ h quality asphalt plant are produced with experienced staff. Polygon batch Mix Asphalt Plants Advantages Optimum price, high performance Precision weighing and high quality blend High efficiency rotary dryer and burner Easy Maintenance 7-24 after sale support Possibility of asphalt mixing plant spare parts at reasonable prices Operator friendly asphalt plant automation system Easy assembly and disassembly possibility Products suitable for different asphalt production (mastic asphalt, colored asphalt, recycling​ Aggregates are typically moved from the stockpiles to the cold feed bin using a front-end loader. Cold feed bins are used to dosage the different aggregates used in the mix to the drying drum. Our Advantages; Thanks to its functional design, it facilitates transportation and installation. Attachments have bolted design. Thanks to its high strength silo casing and twisted body undergoes no change in shape under load. Thanks to the frequency-controlled dosing bands, each material can be supplied in any desired rate. The flame size of the dryer burner can be controlled automatically with the measurement sensor (optional)​ Polygon asphalt plant mixer provides long wear parts life and homogeneous blend. Features; Heavy duty group high quality reducer. Heat and abrasion resistant inner liners Ncodpfx Aox D A N Tsd Nsl Long life arms and paddles Double-valved discharge system Discharge valve with external resistance heating Polygon-asphalt plant filter system separates the gas and dust generated during asphalt production. The decomposed filler dust can be used in mixture if desired. Features; Input and output temperature measurement Clean air valve to protect bags from burns Nomex filter bags with vertical casette Dust-proof design Easy bag changing Reverse air flow bag cleaning system Insulation suitable for climate conditions and heat transfer ​The dust collection system includes supporting feet for easy installation and implementation. The filter dust collection system is perfectly tailored to the mixing plant capacity. The vertical layout-of the filter bags guarantees maximum utilisation of the surface area with efficient filter function. Polygon dryer creates a maximum heat transfer surface thanks to its special wing design. With minimum fuel consumption, it allows the removal of humidity of aggregate and heat it up to the desired temperature. Our Advantages; Dryer rollers and rings are manufactured from long-life forged steel. Easily interchangeable bolt-type compensation springs that distributes body load evenly Suitable for stainless steel insulation coating and heat transfer, rockwool covered body With soft starter support, operation without problem under load Automatically adjustable burner according to humidity and amount of aggregate (optional The drum tube, which is made of a thick-walled, solid steel construc- tion, achieves maximum efficiency, very low exhaust gas temperatures and prevents temperature losses during the...

Condition: used, Polygonmach stationary hot mix asphalt plant refers to an asphalt plant that is fixed in one location and produces hot mix asphalt continuously. It is not portable and is typically used for large-scale asphalt production projects. Capacity vary from 60-400 tph. The functions of Polygonmach stationary asphalt plant includes: Nsdpfx Adox D A D Re Necl Aggregate Storage and Handling: The plant has storage bins or silos to store various sizes of aggregates. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or a dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Asphalt Binder Storage and Heating: The plant has storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce the hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Storage and Loadout: The hot mix asphalt is stored in silos or storage bins until it is ready for loadout onto trucks for transportation to the construction site. Usage areas for Polygonmach stationary asphalt plants include road construction, highway projects, airport runways, parking lots, and other large-scale asphalt paving applications. The operation of Polygonmach stationary asphalt plant typically involves the following steps: Aggregates are stored in the designated bins/silos of the plant. The aggregates are fed into the drying drum, where they are heated and dried. The heated aggregates are then transported to the mixing unit. Options: stationary, continuous Capacity: Max.: 400 t/h(245 lb/s)Min.: 60 t/h(37 lb/s)

Condition: used, Polygonmach stationary hot mix asphalt plant refers to an asphalt plant that is fixed in one location and produces hot mix asphalt continuously. It is not portable and is typically used for large-scale asphalt production projects. Capacity vary from 60-400 tph. The functions of Polygonmach stationary asphalt plant includes: Aggregate Storage and Handling: The plant has storage bins or silos to store various sizes of aggregates. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or a dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Nodpfx Adsx D A Ebj Nscl Asphalt Binder Storage and Heating: The plant has storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce the hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Storage and Loadout: The hot mix asphalt is stored in silos or storage bins until it is ready for loadout onto trucks for transportation to the construction site. Usage areas for Polygonmach stationary asphalt plants include road construction, highway projects, airport runways, parking lots, and other large-scale asphalt paving applications. The operation of Polygonmach stationary asphalt plant typically involves the following steps: Aggregates are stored in the designated bins/silos of the plant. The aggregates are fed into the drying drum, where they are heated and dried. The heated aggregates are then transported to the mixing unit. Options: stationary, continuous Capacity: Max.: 400 t/h(245 lb/s)Min.: 60 t/h(37 lb/s)

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm • Swinging hammers • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) • Capable of reducing waste wood and used timber up to a diameter of 30 cm • Number of axles: 2 tandem/dual axles • Brake system: Air brakes • Towing eye: 40 mm • Total weight: 8,960 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. Ncodpfx Adexu Dipj Njl - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions.