Used Soft Start for sale (7,536)

Condition: excellent (used), functionality: fully functional, soft starter Aucom IMS2 IMS520585 V5 C24 F1 E0 motor starter 132-450 kw Digital display, fully automatic setting options. IMS2xxxx-V5 Ksdpfx Aowv Idiehbonc 3 x 200 VAC ~ 525 VAC (in-line / 3-wire connection) 3 x 200 VAC ~ 440 VAC (internal delta / 6-wire connection) IMS2xxxx-xx-C24 230 VAC or 400 VAC (+ 10% / - 15%) Control inputs Start (terminals C23, C24) Active 24 VDC, 8 mA approx Mains frequency at start 50 Hz (+/- 2 Hz) or 60 Hz (+/- 2 Hz) during start > 45 Hz (50 Hz), or > 55 Hz (60 Hz supply) during run > 48 Hz (50 Hz), or > 58 Hz (60 Hz supply) Immunity IMS2xxxx-xx-xxx-xx-E0 IP00 (open chassis) echnikai leírás: Aucom IMS2 soft starters are a total motor starting solution, combining high-level functionality with flexibility and ease of use. Whether you need a simple solution to starting or stopping your motor, or a comprehensive protection system for your motor and installation, the Aucom IMS2 can be configured to suit. The Aucom IMS2 offers a choice of soft start and soft stop profiles to ensure optimum control for all load types. The unique torque control system gives more linear acceleration than standard constant current, and a special pump control function reduces water hammer. The Aucom IMS2 also incorporates advanced motor and load protection features, ensuring safer operation for your application. With extensive input/output and integration options, the Aucom IMS2 minimises installation time and costs and ensures that motors can be operated with confidence. In simple installations, set up is very quick as only one parameter needs to be set before the starter is ready to use. For advanced applications, an extensive range of functions allows you to use the Aucom IMS2 to suit nearly all motor starting and control requirements. Aucom IMS2 soft starters can be connected in in-line or inside delta configuration. Inside delta connection allows control of motors 50% larger than the standard rating, and also allows replacement of star/delta starters without changing existing motor wiring. Power connections on 302 ~ 1574 A models can be configured for any combination of top or bottom input and output, making the Aucom IMS2 ideal for integration into existing installations.

Condition: like new (used), Ue: 200–480 V AC, 3-phase, 50/60 Hz, 230 V, 5.5 kW Uc, Vs: 24 V AC/DC Application: Machine control Width: 45 mm Knsdpsy U D N Ssfx Ahbec Height: 150 mm Depth: 118 mm Weight: 459 g Condition: like new

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke, soft starter, starting choke -Manufacturer: Horstmann, soft starter -Type: ESA 1.5/400 -P motor: 1.5 kW 400V 50/60 Hz -Dimension: 135/55/H75 mm -Weight: 0.3 kg Kedpfxsqrwxpj Ahbsnc

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 -Current: 10A Knodpfxjkzpngj Ahbec -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter -Manufacturer: Alfred Imhof, soft starter size D08 -Technical data: see photo identification plate -Number: 2x soft starters available Knedeh Tadzjpfx Ahbsc -Price per piece -Dimension: 95/65/H110 mm -Weight: 1.5 kg

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, overall weight: 2,500 kg, grinding height: 200 mm, The machine is equipped with the following processing units (further details can be found in the attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 1. Sanding roller in grooved steel design 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 2. Sanding roller in grooved steel design 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 3. Sanding roller, 85 Shore TECHNICAL DETAILS Ksdpfxjz Hxnbo Ahbonc Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Motor voltage: 50/60 Hz Electrics: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Reversing function: 3 Weight: 2,500 kg EQUIPMENT Feed table with electric height adjustment 3 motors: 18.5 kW (25 HP) each with SD start sanding belt brake Touch screen control with color display Additional extraction connection Note: The machine is delivered without a power cable. The electrical connection must be provided on site.

Condition: new, New, unused ABB soft starter from the PSR series for three-phase motors. Manufacturer: ABB Type: PSR3-600-70 Product type: Soft starter Article number: 1SFA896103R7000 Series: PSR Rated operating current Ie: 3.9 A Operating voltage Ue: 208 to 600 V AC Control voltage Us: 100 to 240 V AC Frequency: 50/60 Hz Motor power at 230 V: 0.75 kW Motor power at 400 V: 1.5 kW Motor power at 500 V: 2.2 kW Circuit type: In-line connection Phase control: 2-phase Start/stop ramp: adjustable via potentiometer Start/stop ramp time: 1 to 20 s Start voltage: 40 to 70 % Output signal: RUN relay output Bypass: integrated Knedpfx Aezb Niiehbec Main circuit connections: L1, L2, L3 / T1, T2, T3 Control circuit connections: ST, A1, Run, A2 Dimensions: 45 x 140 x 114 mm Net weight: 0.4 kg Manual: available Condition: NOS (New Old Stock)

Condition: good (used), Year of construction: 2010, functionality: fully functional, overall weight: 100 kg, input voltage: 220 V, The EasyFormer RAS 12.35 is an intelligent beading machine with AutoTeach, which learns from you and thus delivers repeatably accurate beads and flanges. Three operating modes – manual, learning, and automatic – shorten your setup time and provide consistent results from single parts to series production. Using the 7" touch control panel, you can save up to 20 standard programs, including roller set, stop plate, stop position, and tube diameter. For non-rotating beads, the rollers reach their turning point with high precision, either forward or backward; the continuous or incremental feed of the upper roller delivers top results with both thin and thick sheets. With a 63 mm roller center distance, a 255 mm overhang, and a capacity of up to 1.75 mm (400 N/mm²), you can cover a wide range of applications. Two speed ranges give you full control: a fast range of 0–28 m/min up to a sheet thickness of 1.25 mm, as well as an adjustable range of 0–x m/min for sensitive or more forceful forming. You control the stepless speed with soft start using a foot switch, and the mm/inch switch simplifies international measurements. The unique UnLock safety function opens the upper roller in a flash – even in the event of an electrical overload; in addition, a mechanical release is available as an emergency backup. The sensitive adjustment of the lower shaft is carried out centrally via a lever and scale with a clamping mechanism, and new employees can quickly become productive thanks to the short training time. Technical data Kedpfxo Aavm Ue Ahbsnc Overhang 255 mm Sheet thickness max. steel 1.75 mm Total power requirement 230 V Weight 100 kg Roller center distance 63 mm Original operating manual

Year of construction: 2020, condition: used, machine/vehicle number: E22SJ20072839180, The iCombiPro is the latest combination oven from RATIONAL. The iCombiPro 20-2/1 electric model, with 20 GN 2/1 or 40 GN 1/1 trays, is also easy to operate for untrained personnel, as it achieves outstanding food quality without requiring constant monitoring. The super-fast intermediate and self-cleaning cycles keep your appliance sparkling clean. The combination oven has been completely refurbished in our in-house workshop and is therefore fully functional and free of defects. A 6-month warranty is provided on all electrical components. The iCombi Pro has only operated for 5834 operating cycles/hours! Manufacturer's recommended retail price: €37,640 net = €44,792 gross Offer price: €16,500 net = €19,635 gross Our service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional and competent advice – before and after purchase Flexible shipping or self-collection options Provision of operating instructions, connection diagrams & spare parts Complete range of accessories at attractive prices Kodpfozwu U Iex Ahbenc Condition: used, inspected, fully functional Technical data: W x D x H: 1082 x 1117 x 1872 mm Minimum door opening dimensions for transport W x H: 1200x1900mm Serial number: E22SJ20072839180 Year of manufacture: 07/2020 Max. loading quantity / tray: 5 kg Max. total loading quantity: 100 kg Weight of electric appliance: 325 kg Electrical connection conditions: Voltage 3 NAC 400 V Electrical connection value: 67.9 kW Steam operation power: 54 kW Hot air power: 66 kW Fuse rating: 100 A Water connection conditions: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Other information: Temperature range: 30°C to 300°C Senses the current cooking chamber conditions Detects the size, loading quantity and product condition and calculates the browning accordingly Learns which cooking habits are often used and implements them Determines the ideal cooking path for the desired result MyDisplay - user-adjustable, user-specific display TFT color display and touchscreen Application and operating manual can be accessed on the device display Core temperature sensor with automatic error correction in case of punctures and positioning aid Door compartment with glazed, energy-saving glass LED interior lighting Including energy consumption display Humidity control: percentage-accurate humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps Humidification adjustable in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separation system without additional grease filter Cool-down function: rapid cooling of the cooking chamber Automatic adjustment to the installation location (altitude, climate etc.) Appliance door with ventilated triple-glazed pane and pivoting inner pane Fixed wastewater connection according to SVGW permissible Splash and spray water protection IP X 5 Separate solenoid valves for soft and warm water up to +30°C Automatic start time preselection with date and time adjustable Material inside and outside made of stainless steel DIN 1.4301 WiFi module integrated Subject to changes and errors.

Condition: used, Rotating device Gunter Seibold rotating device for HTS coils – continuously variable drive (Type S05082) Description: Professional rotating device for holding and rotating HTS coils with winding cores. Developed for the uniform distribution of two-component resin during the curing process. Ideal for development, laboratory, or production environments with high-temperature superconductor coils. The winding form is electrically heated; the power supply is directly connected to the form (not included in the scope of delivery). The machine impresses with its precise control, ease of operation, and service-friendly design. Knedpfszil R Rsx Ahboc Technical features Solid machine stand: Welded square tube construction with adjusting screws and floor anchors Drive: Three-phase planetary gearbox motor (11 kW, 400 V, 50 Hz, 3 phases) Continuously variable speed (0.2 – 100 min⁻¹) Soft start & soft stop via frequency inverter (4-quadrant controller) Electromagnetic spring force brake (safe stopping in case of power failure) Rotating direction can be switched left / right Control panel: 5.7" touch panel for setting speed, direction, ramps, time, or number of revolutions Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrical system & control cabinet: Control integrated in the machine stand 400 V / 230 V power supply, 24 V DC control voltage Circuit breaker, RCD protection 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with air conditioning unit Complete grounding & static discharge of the main shaft Adjustable work area light (swivel and height adjustable) Feature / Value Max. coil diameter 1,500 mm Coil passage 1,700 mm Center height above floor 1,100 mm Max. load on turntable 500 kg Turntable Ø 600 mm, 4 T-slots (DIN 650) Speed range 0.2 – 100 min⁻¹ (continuously variable) Torque 775 – 539 Nm Operating voltage 400 V / 50 Hz Control voltage 24 V DC Connected power 11 kW Connected current 32 A Color scheme (according to RAL) Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / control cabinet: Light gray (RAL 7035 / 5010) Weight: approx. 1800-2000 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Pallet wrapping machine, stretch wrapper for pallets, special version for use with manual pallet trucks – used: Kedpfx Ajz Sfaqohbsnc Price ex works: €4,750 (net), including loading! Very robust machine! Type HAD 1500NH Year of manufacture: 2012 No. 274 with the following standard features: 2 programs (normal and cross wrapping) Photo cell (can be switched on and off) Freely selectable bottom and top wrapping Mechanical film brake Soft start of the turntable Adjustable film inclination, max. pallet height 2200mm Turntable diameter 1500mm Programmable turntable speed Safety light barrier on the open turntable Condition: very good Available: immediately Location: 91177 Thalmässing Photo is similar:

Condition: used, Year of construction: 2023, functionality: fully functional, operating hours: 1,031 h, workpiece length (max.): 2,500 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 700 mm, number of slots in tool magazine: 18, Equipment: documentation/manual, 5-AXIS MILLING PLOTTER 2531 Specifications: 2500 X 3100MM, Z-AXIS RANGE 700MM HITECO 13.5KW S6 TILTING/ROTARY HEAD SET A-AXIS RANGE: +/–120°, C-AXIS RANGE: +/–320°, ROTARY TILT T-JQX 29L0549395D ELETM QX-2 11/12 24 63F NC HSK63 FOR 5-AXIS MACHINES AIR CONDITIONING FOR THE CONTROL CABINET ACTIVE COOLING SYSTEM – CHILLER CW-6000 (FOR SPINDLES UP TO 20KW) LINEAR TOOL MAGAZINE, 18 POSITIONS, FOR 5-AXIS MACHINES ROTARY TOOL MAGAZINE, 16 POSITIONS, HSK63F AUTOMATIC CENTRAL LUBRICATION SYSTEM WITH SKF GREASE SAFETY ENCLOSURE WITH ELECTRONIC SAFETY SYSTEM (FOR 5-AXIS MACHINES OR MACHINES WITH A TILTING ELECTRO-SPINDLE) WALTER SKTG 5.5 P COMBO SCREW COMPRESSOR WITH DEW POINT DRYER REMOTE SERVICE ACCESS (REMOTE DIAGNOSTICS) CONTROL SYSTEM FOR TWO PUMPS UP TO 11KW TOTAL (PROTECTIONS + SOFT START + PRESSURE RELIEF VALVE) BUSCH MV 0312B-5.5KW VACUUM PUMP, CAPACITY 290M3/H, MAX. ULTIMATE PRESSURE 150MBAR (ABS) 2131 EXPERT MILLING PLOTTER, WORKING AREA 2100X3100MM Specifications: WORKING AREA 2100X3100MM - Z-AXIS TRAVEL RANGE 300MM, EXPERT, PRO - OMRON SERVO AC HIGH-SPEED DRIVES (COMPLETE WITH PLANETARY GEARBOXES) 1.5KW ETHERCAT - 2131 RASTER VACUUM TABLE - POROUS SUPPORT PLATE (1200 X 2500 X 12 MM) - PNEUMATICALLY CONTROLLED VACUUM SECTION, 6 PCS - CONTROL SYSTEM FOR TWO PUMPS UP TO 11KW TOTAL (PROTECTIONS + SOFT START + PRESSURE RELIEF VALVE) - BUSCH MV 0312B -5.5KW VACUUM PUMP, CAPACITY 290M3/H, MAX. ULTIMATE PRESSURE 150MBAR (ABS) - INDUSTRIAL REAL-TIME CONTROL SYSTEM (MS) OSAI OPENSMART, CYCLE TIME BELOW 2MS, UP TO 16 AXES SUPPORT, ETHERCAT COMMUNICATION WITH A SMALL CONTROL CABINET - HITECO 7.5KW S6-ATC ELECTRO-SPINDLE SET, UP TO 24,000 RPM, FAN-COOLED, TOOL MOUNTING - LINEAR TOOL MAGAZINE, 6 POSITIONS - ACTIVE OSCILLATING KNIFE – PNEUMATIC - OPTION FOR OSCILLATING KNIFE: CREASING HEAD - OPTION FOR OSCILLATING KNIFE: DISC KNIFE (INSTEAD OF THE WRITING HEAD) - PNEUMATICALLY MOVED EXTRACTION FOOT (WITH OUTLET FOR CONNECTING AN EXTRACTION SYSTEM/VACUUM CLEANER) - PREMIUM COOLING MIST, 1 PCS - BASE POSITIONING CONTROL - POSITIONING BASE 25MM, 1 PCS (MINIMUM 3 PCS) - OSAI LASER FOR POSITIONING - AUTOMATIC CENTRAL LUBRICATION SYSTEM WITH SKF GREASE - CAD/CAM VECTRIC CUT 2D PRO - SAFETY ENCLOSURE WITH ELECTRONIC SAFETY SYSTEM - HSK-F63 STARTER KIT (5 HSK-F63 TAPER HOLDERS + 18 ER32 COLLETS IN THE RANGE OF 3-20MM) Kedpfx Ahez Suyrsbonc ELECTRIC CHAMBER OVEN FOR HEAT TREATMENT, SwissTherm PKK-7500 Specifications: Chamber Dimensions: 2500x1000x3300 Maximum Temperature: 180 Voltage: 3/N/PE AC 400/230 V, 60 kW, 100A Peel3 Scanner Software: DPS Software, SolidCam 3D, Solidworks Professional, DraftSight Enterprise Schmalz Conveyor Jumbo Ergo 65kg vacuum manipulator system with a lightweight aluminum boom for ergonomic operation HP A3500 ZBOOK FURY 16 G10 Mobile Workstation, 1TB, 132GB, NVIDIA RTX

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission4, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable Kjdpsz Inavjfx Ahbjnc F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Kedpfoz Ipx Hsx Ahbsnc Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Kedpfx Aoz Ipdvehbenc Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi11, Stretch Winder Synthesi Freezer -30 IP65 TECHNICAL DETAILS Turntable / base frame / Ø 1500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm Knsdsz Iq I Aepfx Ahbec FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display Knodpjz Inapofx Ahbec F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Kjdpjz Ipwcefx Ahbsnc Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm Kedoz Ipr Hopfx Ahbonc ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Roll cutter RGS50 - Used machine - Good condition - ready for immediate use Partially refurbished: Hydraulic hoses replaced Hydraulic oil changed Safety valves retrofitted Control system refurbished Blade holder renewed Knives renewed Knife length 2500mm Max. opening 1600mm V-table design Drive power: 15kW with soft start Kodpfxez E Hnys Ahbenc Double pump with 2-stage cutting speed Two-hand operation Cable pull emergency stop on both sides Base frame and feed table available

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change Knodez Iqnvjpfx Ahbjc ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: used, DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (like new!!) Dyemansion Powershot C blasting cabinet Gentle cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0, Year of manufacture: 2021 The industry standard for simple and efficient powder removal Automated powder removal increases your production capacity With the Powershot C, a medium-sized build volume can be depowdered in just ten minutes. The time required for part cleaning and the personnel in your production can be significantly reduced. This increases your efficiency. By investing in automated powder removal with the Powershot C, up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blasting cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts contained within. This configuration guarantees efficient powder removal. High user comfort with improved ergonomics and process control Experience a new level of process control with a touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of process parameters via control panel and touchscreen. PERFORMANCE: Knsdezgr T Tspfx Ahbec Cycle time: Variable from 1 to 40 minutes, typical cycle time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5x full Stratasys H350 build volume Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space required in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: 1kW Requirements 3x400V > 1kW 50Hz 2.5A COMPRESSED AIR: Consumption Minimum: 1.4 m³/min at 2.2 bar Maximum: 1.8 m³/min at 5 bar NOISE EMISSION: Sound level < 80dB(A) Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions for you by telephone.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle Kjdjz Ir Hajpfx Ahbenc - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi07, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Knjdpfoz Iqtfjx Ahbec Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Knedpfx Ahez Iqp Tjboc Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar