Used Slitting Cut To Length for sale (46,194)

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, TruLaser 3030 L81 – FIBER 4000W Laser on: approx. 13,300 h Machine on: approx. 26,300 h Nwodpsyxc D Aofx Ahvsd

Condition: used, machine/vehicle number: 008444, Position 1: Panel Feeding and Loading PAUL - LOGTECH-K 34 G - RC 105 Position 2: Multi-Blade Panel Saws PAUL - LOGTECH-K 34 G - RC 105 Nedpfsyxctkex Ahvowd Position 3: Panel Stacking and Offloading PAUL - LOGTECH-K 34 G - RC 105

Condition: excellent (used), Year of construction: 2014, 3 kW resonator power Nsdpfoyxc Afsx Ahvjwd

Condition: used, maximum load weight: 33,360 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 6,000 mm, loading space volume: 29 m³, total width: 2,470 mm, total height: 3,900 mm, Year of construction: 2025, Equipment: ABS, D-TEC 3-axle container chassis 20 FT ADR with VANHOOL single-chamber pressurized tank, 29 cbm First registered April 2025 Tank container built in 2006 Unladen weight 5,640 kg Steel chassis, fully spray-galvanized and painted in 2-layer RAL 9005 Fifth wheel height 1,180 mm Tires: 6 x 385/65 R 22.5 Hankook High-gloss aluminum rims All-LED lighting, round rear headlights 2 x LED work lights SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE KNORR Trailer EBS VANHOOL 20 FT tank container, V2A stainless steel Single-chamber Nedpfoyxb Hcsx Ahvowd 29,362 L volume Test pressure 2.86 bar Operating pressure 2 bar Door cover DN500 Outlet at the rear center of the stainless steel casing RENTING is the new BUYING. Rental or full-service leasing is available immediately.-----

Condition: used, Year of construction: 2003, Saw blade diameter: 350 mm, bore diameter: 30 mm, motor: 2 kW, speed: 3800 rpm. Extraction connection diameter: 95 mm. Weight: approx. 105 kg without stand. Cutting width at 90°: 430 mm, at 45°: 300 mm. Cutting height: 135 mm. Hydraulic return brake. Without stand and roller conveyors. Nwedjyw Tzijpfx Ahvsd

Condition: used, saw-blade dia. tba mm Cutting height tba mm Nsdpoyw Tlusfx Ahvjwd Motor output tba kW Control tba Optimizing cross-cut saw Paul type 17 AP for the automatic cutting to length and optimizing of solid wood according to specified lengths and error detection. The machine increases material yield and efficiency through computer-controlled cutting sequences and is ideal for sawmills and wood processing companies with series production.

Condition: used, Year of construction: 2002, total height: 1,870 mm, total length: 2,100 mm, total width: 2,720 mm, Weight: 1.600 kg Nsdsyf H H Hopfx Ahvswd - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 595001 3 16 - Main motor power [kW]: 6.5 - Voltage [V]: 400 - Current consumption [A]: 15 - Fuse [A]: 20 - Transport dimensions: 2100mm x 2720mm x 1870mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), functionality: fully functional, Year of construction: 1991, This high-performance swing beam shear RAS 83.30 with ELGO NC backgauge and pneumatic sheet support comes from first ownership. Cutting capacity: 3190 x 2.5 mm Drive power: 5.5 kW Machine weight: 2800 kg Nedpfsxmi Dpjx Ahvowd Includes pneumatic sheet support, ELGO NC backgauge, 1 left-hand side stop, and 3 additional support arms. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2002, max. wheel diameter 275 mm gear width 55 mm max. module 6 min. module 1 Control 840 C Siemens total power requirement 100 kW Njdpfx Ahjtumrpevewd weight of the machine ca. 16,7 t dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m

Condition: like new (used), Year of construction: 2008, amount 1 STK The tool shown in the illustration is a Sandvik Coromant T-Max Q-Cut head for grooving, identified more precisely by part number 570-40R 1513-09-50. Manufacturer: Sandvik Coromant Nwsdpfxjyh Rl Ne Ahvjd Type: T-Max Q-Cut head for grooving (slotting) Connection: SL head (screw-mounted) - size 40 Hand: Right-hand Maximum cutting depth: 9 mm Coolant supply: Axial concentric inlet

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 230 V, warranty duration: 24 months, DGUV certified until: 04/2028, type of input current: AC, total length: 440 mm, total width: 1,700 mm, total height: 470 mm, control voltage: 24 V, input frequency: 50 Hz, space requirement height: 470 mm, space requirement length: 440 mm, space requirement width: 1,700 mm, Cutting LEO with extended infeed conveyor Pretzel Bun Baguette - Schneider Tabletop unit made of stainless steel Knife height adjustable for average Nodpfof Epwvox Ahvewd Belt speed adjustable DGUV V3 tested Connection 230 / 240V, 50 Hz, ready to plug in Passage width / height 140/90 mm Dimensions (WxDxH) in mm: 1700 x 440 x 470 NEW machine With guarantee optional: - Mobile table for LEO - Cutting - freight costs - Shipping wooden crate VISIT our sales center with bakery equipment and many bakery machines

Condition: excellent (used), C.N.C. WORKING CENTER 4 axes (X-Y-Z-C) Nwsdpjvxhnusfx Ahvjd Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP / IMATRONIC - BIMA Fast Cut Working table with pods and rails. No. 8 Supports (rails) of length mm 1400 Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 4200 x 1600 x 60 Min. workpieces dimensions (X - Y - Z) mm 295 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 4250 x 2200 x 60 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 28 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 14,5 (S6) / Kw 7,5 (S1) N° 3 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) N° 5 Air cushion tables (for the panel parking before being processed) Vacuum system with suction cups (controlled by CN) to lift panel onto outfeed belts Workpieces Outfeed system (from Bima Cut) with system with motorized belts

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: Nsdjywwrfepfx Ahvjwd 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Peak power: Up to 6 kW Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Nwodpeywwq Uofx Ahvod Output beam diameter: 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Njdeywutyjpfx Ahvswd Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Rotor blades: 5x3 Njdpfx Ajywuriohvswd Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 6,000 W, warranty duration: 24 months, Equipment: CE marking, STOCK MACHINE - IMMEDIATELY AVAILABLE New fiber lasers from the HLB series - optimized equipment with an eye on the essentials - low acquisition costs Max Photonics resonator, Raytools auto focus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Cutting head: Raytools - Auto Focus Resonator 6KW Automatic changing table including light barriers Suction: Welldone CE certified Cypcut control with touchscreen including online programming directly on the control Sheet format 4,000mm x 2000mm Connection value max. 30kW Installation area approx. 11,000mm x 4,000mm x 2,200mm The machine is included 24 month guarantee Installation Delivery within Germany and Software/operator training offered Optional: Offline programming CAD CAM software Libellula [CUT] Connect gases, electricity, done. In our exhibition we have various laser machines from our manufacturers under power and various materials for testing. We would be happy to invite you to come and cut your drawings or material. Njdpfxeywufio Ahvswd We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 15 years, of which we have been selling their fiber lasers for around 8 years. We have already installed more than 300 fiber lasers from YAWEI. Come and see for yourself in your area. Call us and visit us!

Condition: excellent (used), Catalogue number 7940 TECHNICAL DATA - Max. saw blade diameter: 500mm - Spindle diameter: 30mm - Blade guard included - Hydraulic blade feed - Cutting height: 140mm - Main motor: 4.4kW - Table size (L/W): 570x870mm - Table height from base: 750mm - Roller tables: 2 pcs - Infeed roller table: 1170mm – Outfeed roller table: 1210mm - Sliding roller width: 600mm - Overall dimensions (without roller tables) L/W/H: 1040x820x900mm - Weight: approx. 570kg ADVANTAGES – Made in Germany – 2 roller tables – Pneumatic saw blade stroke – Used saw in perfect condition Net price: 13,900 PLN Net price: 3,300 EUR (based on exchange rate of 4.2 EUR) Nwedpfeywtr Ujx Ahvsd (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7937 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm Njdpfx Aoywtptjhvewd - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg ADVANTAGES – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 908, laser power: 3,200 W, travel distance X-axis: 1,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 600 mm, No minimum price – guaranteed sale to the highest bidder! Bids are binding and require collection within the period from 08/04/26 to 16/04/26! Nwjdpeylalvsfx Ahved TECHNICAL DETAILS X-axis travel: approx. 1500 mm Y-axis travel: approx. 4500 mm Z-axis travel: approx. 600 mm Laser power: 3.2 kW Table dimensions: 3500 x 2000 mm MACHINE DETAILS Lifting device model: TRUMPF LOADMASTER Number of suction units (lifting device): 12 Lifting device features: Light barrier system Dimensions & Weight Dimensions (L x W x H): 12000 x 7000 x 2400 mm Machine weight: 15 t EQUIPMENT Shuttle table Additional laser head Accessories Note: The laser cutting system can be transported on trucks up to 3000 mm wide and therefore does not require a special permit. External reference: 18

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Overall height: 1350 mm Width with control cabinet: 850 mm Nwedpfx Ajywr Alshvsd Depth: 1420 mm Motor power: 1.5 / 3.0 kW Disc diameter: 200 mm Cutting range up to: 40 mm

Condition: good (used), Slotting Machine RG 632/40 - Year of manufacture: approx. 1980 - Number of spindles: up to 6 milling spindles - Simultaneous machining: 6 workpieces in parallel - Control: manual (tracing stylus / template) - Max. clamping length: approx. 1,050 mm - Max. workpiece diameter: approx. 300 mm (for single machining) approx. 150 mm (when using all spindles) - Motor power per spindle: approx. 0.5 kW Nwedpfx Aoywn Aujhved - Dimensions: approx. 3,700 x 2,200 x 1,500 mm (LxWxH) - Weight: (estimated) approx. 1.5–2.5 t

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel range (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Nwodpjywkt Nefx Ahvjd Wire diameter from 0.05 mm to 0.20 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Including AGIEJOGGER handbox for convenient machine setup 15" LCD color display with integrated keyboard and mouse AGIEVISION CNC control Including AGIESETUP 3D Including AGIEDUO dual-wire system for automatic changeover between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2700 kg The machine is cleaned, factory overhauled, and thoroughly tested by our specialists. We are happy to commission the machine at your site and provide training in the control system and machine operation.

Condition: like new (used), Year of construction: 2025, Horizontal thin-cut band saw with 3 heads 300 mm working width With 3 cutting heads, to make max 4 slats in one run New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 970mm wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm Njdpfevwbg Ujx Ahvjwd * same as new *

Condition: used, Frontschnittmaschine in einem sehr guten Zustand / Front Cutting Unit in very good condition Frontschnittmaschine / Front Cutting Unit Theisen & Bonitz S 201 Njdpfx Ahsywimuovswd Baujahr / Year 2021 - Serial-No. 7237 in einem sehr guten Zustand // in very good condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test