Used Sla 3D Printer for sale (4,400)

Condition: used, Year of construction: 2022, total length: 400 mm, total height: 450 mm, total width: 400 mm, overall weight: 20 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Dimensions & Weight Itjdpezwn Tkefx Ahbjn Dimensions (L x W x H): 400 x 400 x 450 mm Weight: approx. 20 kg The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The technical data provided is based on the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: used, machine/vehicle number: FPR4012012202007256, Year of construction: 2022, total length: 800 mm, total height: 450 mm, total width: 600 mm, overall weight: 30 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Onyx filament: 800 cm3 Fiberglass filament: 50 cm3 MACHINE DETAILS Dimensions & Weight Transport dimensions: approx. 800 × 600 × 450 mm Transport weight: approx. 30 kg EQUIPMENT Markforged EIGER Software Cloud Online Version Markforged EIGER Software Desktop Online Version Early access to new features 3 × FFF quick-change nozzle 3 × CFF quick-change nozzle Markforged Drybox for material storage The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. This fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction. Itodpfx Ahszwn Tdeben

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: K00219, overall weight: 601 kg, construction height: 406 mm, construction width: 355 mm, Submitting a bid obligates the bidder to collect the item by 14.01.2026! TECHNICAL DETAILS Build volume: 406 mm x 355 mm x 406 mm Layer thicknesses: 0.127 mm, 0.178 mm, 0.254 mm, 0.330 mm Volume cassettes for build and support material: 1,510 cm³ / 3,020 cm³ Achievable accuracy: ± 0.127 mm or ± 0.0015 mm/mm Z accuracy: −0.000 / +layer height MACHINE DETAILS System dimensions: 1,295 mm x 902 mm x 1,984 mm Weight: 601 kg Input voltage: 420 V Supply voltage: 208 V AC Phases: 3 Frequency: 50/60 Hz Current consumption: 18 A Itodpfxex Hwgns Ahbon Network connection: 10/100 Base-T Protocol: Ethernet Standards: CE, cTUVus, RCM, EAC, FCC Part B EQUIPMENT Insight™ Software Control Center™ Software GrabCAD Print compatibility SCA 1200HT support material cleaner Compatible with iSQUARED materials: ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085, ULTEM 1010 Note: One of four cassettes requires servicing.

Condition: refurbished (used), For Sale: Refurbished EOS M100 – Ready to Use This fully inspected and refurbished EOS M100 is in excellent condition! This setup is ready to use and ideal for expanding or starting a DMLS production line. Specifications: • Technology: DMLS (Direct Metal Laser Sintering) • Material Type: Metal • Compatible Materials: On Request • Build Volume: 100 x 100 x 95 mm • Laser Type: Yb-fiber laser; 1 x 200 W Consumables Featured We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 is designed to perform at or above OEM powder levels, while significantly reducing costs. By switching to our materials, you will reduce your production costs without compromising on quality. Included Services: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options to fit your needs, for long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality remanufactured EOS SLS and DMLS machines with comprehensive support services. We are the only provider to offer end-to-end solutions for used EOS equipment, with unmatched expertise and reliability. What we offer: • Expert maintenance: Installation, maintenance, repairs and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS systems. • Unmatched support: From transportation to maintenance plans, we have it all covered. Itjdewt Dhrepfx Ahbon Trust IM3D for top performance, superior materials and the expertise to keep your SLS and DMLS production running smoothly. Please feel free to contact us for more information or questions!

Condition: excellent (used), functionality: fully functional, Very nice AMT PostPro SFX vapor polisher. Comes with parameters for TPU and PA12. Includes all extra accessories like the rack underneath. Itodpfxjy Dglus Ahben Additionally, this system comes with custom-developed recipes to run third-party consumables, saving approximately 70%!

Condition: like new (used), functionality: fully functional, Year of construction: 2015, total length: 1,290 mm, total height: 1,980 mm, total width: 900 mm, type of input current: three-phase, overall weight: 658 kg, input voltage: 240 V, input current: 40 A, temperature: 160 °C, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, positioning accuracy: 0.127 mm, electrical fuse: 40 A, repeat accuracy: 0.05 mm, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, space requirement length: 2,000 mm, space requirement height: 2,200 mm, noise level: 65 dB, space requirement width: 1,500 mm, High-performance industrial 3D printer based on FDM technology, designed for functional prototyping and low-volume production using certified engineering thermoplastics. The Stratasys Fortus 450mc is a proven platform for companies requiring repeatability, dimensional stability, and material traceability, making it suitable for automotive, aerospace, industrial equipment, and advanced R&D environments. The system is configured with dual extrusion heads in open material mode, enabling advanced process flexibility and compatibility with a broader range of FDM-grade thermoplastics, subject to parameter optimization and the thermal constraints of the platform. Key Features: - Heated build chamber (up to ~180°C) for superior layer adhesion and reduced warping - Industrial-grade repeatability for functional and end-use parts - Large build volume: 406 × 355 × 406 mm - Dual extrusion system (model + soluble support) - Closed material system for process stability and consistency - Compatible with Insight software for advanced process control Supported Materials: 🔹 Standard & Functional Polymers ABS-M30 → robust functional prototyping ASA → UV-resistant outdoor applications ABS-ESD7 → electrostatic dissipative components 🔹 High-Performance Polymers PC (Polycarbonate) → high impact resistance PC-ABS → balance between toughness and processability 🔹 Advanced Engineering Materials Nylon 12 (PA12) → wear resistance and fatigue durability Nylon 12CF (carbon fiber reinforced) → increased stiffness and dimensional stability 🔹 Aerospace-Grade Thermoplastics Itedpfxsy Ug Eco Ahbjn ULTEM 9085 → FST compliant (flame, smoke, toxicity) ULTEM 1010 → maximum thermal resistance and mechanical strength

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, construction height: 200 mm, construction width: 270 mm, working length: 330 mm, Equipment: CE marking, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Build volume: 330 mm x 270 mm x 200 mm Layer height: from 50 µm Precision X, Y: 150 µm MACHINE DETAILS Technology: FFF + CFR (Continuous Fiber Reinforcement) Iedexu E Srepfx Ahbotn Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon fiber, Glass fiber, Kevlar, HSHT Operating hours: 2,262 h EQUIPMENT Eiger software (cloud and local) Connections: Ethernet, Wi-Fi, USB Material dry box for safe storage Continuous fiber reinforcement: carbon fiber, glass fiber, Kevlar Enclosed build area for optimal thermal stability High-resolution optical encoders Prepared for Blacksmith (automatic dimensional calibration) Certificates: CE, FCC, UL, UKCA

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 200 h, total length: 2,128 mm, total width: 1,294 mm, input voltage: 400 V, warranty duration: 6 months, input current: 32 A, laser power: 100 W, tank capacity: 32 l, volume flow: 20 m³/h, Polyamide laser sintering system including two interchangeable containers and unpacking station. The machine can be inspected and tested at any time at the BIBUS Austria demonstration center. Furthermore, the system features a quick-change mechanism between recoating blade and coater roller – the system is always up to date with the latest technology due to continuous upgrades. Itodpsqwkypefx Ahbsn

Condition: reconditioned (used), For Sale: EOS M400 – High-Performance Metal 3D Printer This EOS M400, is a cutting-edge metal additive manufacturing system located at the customer’s site. It is equipped with a 1kW laser, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 1kW • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1 • Aluminum alloys: AlF357_1, AlSiMg_1 • Copper alloys: CuCrZr_1, Cu_1 • Stainless steels: GP1_1, PH1_1 • Tool steels: MS1_1, SP2_1 • Titanium alloys: Ti64_1, Ti64ELI_1, Ti64Grade23_1, TiGrade5_1, TiCP_1 • Custom gas options: CustomAr, CustomN2 • Cobalt chrome: MP1_1 Why Choose the EOS M400? Ijdpfxevq Sm Ej Ahbjtn • Large build volume for industrial-scale production. • High laser power for enhanced speed and precision. • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled ex-EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Condition: reconditioned (used), For Sale: EOS M400-4 – High-Performance Metal 3D Printer This EOS M400-4 is a state-of-the-art metal additive manufacturing system located at the customer’s site. It is equipped with 4 (four) 400W lasers, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 4 x 400W • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1, K500 • Aluminum alloys: Al2139 AM, AlSi10Mg, Constellium CP1 • Case Hardening Steel: CaseHardeningSteel 20MnCr5 • Stainless steels: 17-4PH, CX, 316L, PH1 • Tool steels: MS1 • Titanium alloys: Ti64 (grade 23, grade 5), TiCP (grade 2) Why Choose the EOS M400-4? • Large build volume for industrial-scale production. • High throughput for speed and precision. • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality, refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. Itjdpfxozk Ekgj Ahbsn What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled former EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Condition: reconditioned (used), For Sale: EOS P100 – Ready for Immediate Use KNOW WHAT YOU BUY! Fully revised and with warranty! This EOS P100 has been fully inspected and revised, making it ready for immediate use in your production environment. Included in the package: • 2 build frames • Set of hoppers Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Build volume: 200 x 250 x 330 mm • Laser type: Synrad 48-3, 30W CO2 laser • Minimum wall thickness: 0.4 mm Consumables Highlight We offer a wide range of plug-and-play materials, fully tested and optimized for use with EOS machines. Our Inframotion PA12 delivers top performance and provides significant cost savings compared to OEM powders, without compromising on quality. Choose our exclusive materials to drastically reduce your operational costs. Included Services: • Transport & Installation: Safe delivery in original EOS packaging and professional installation included. • Warranty & Maintenance Plans: Flexible options tailored to your specific needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we distinguish ourselves through extensive expertise and unique services. What we offer: • Expert maintenance: Installation, servicing, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS machines. • Complete support: From transport to maintenance plans, we handle it all. Trust IM3D for reliable machines, superior materials, and the expertise to optimize your SLS production. Ijdpsrm Tdwefx Ahbjtn Feel free to contact us for more information or inquiries!

Condition: used, 3DGENCE Type: Industry F420 Year of manufacture: 2021 Technical data: Working volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with a cleaning system Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with an automatic exchange system Itedpfxjzg Tzle Ahbon Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Weight: approx. 350 kg Condition: used Scope of supply: (See images) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2026, Technical data: Control system: Multiaxis real-time interpolator with active trajectory prediction, LAN communication, EtherCat protocol, sampling time under 1ms, correction map, RTCP, remote service access. Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1200 mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes equipped with helical, hardened and ground racks, precision class 6; Z axis with ball screw, precision class 5. Linear bearings: Bosch Rexroth 35 Travel speed: X, Y axes up to 45 m/min; C, A axes up to 6000 degrees/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: Dual-sided master/slave configuration with gantry angle correction Itodpjtz Sgisfx Ahbjn Electrospindle: 8 kW to 36 kW Print heads: - G.12 with throughput up to 12 kg/h - G.20 with throughput up to 20 kg/h - G.50 with throughput up to 50 kg/h - G.200 with throughput up to 200 kg/h Maximum spindle speed: 24,000 rpm (options for 6,000, 40,000, or 50,000 rpm) Construction: Welded, ribbed, stress-relieved, and precision machined steel frame Table type: Vacuum, hybrid, steel T-slot, aluminum T-slot, aluminum vacuum with M16 or M18 holes Optional features: - Tool cooling - Linear or rotary tool magazine - Rotary axis on the table - Laser scanner - Positioning bases - Oscillating unit - 5-axis software package Granulate 3D printers can process a wide range of thermoplastics, such as PLA, ABS, PETG, polyamides, or polypropylene. #ploter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Condition: new, functionality: fully functional, machine/vehicle number: 1325, Year of construction: 2026, Robust, efficient, and user-friendly 3D printer for producing components from resin, rubber, PLA, ABS, PET-G, and other plastics. Operates on three axes (X, Y, Z), enabling the creation of precise, three-dimensional details. 3D Printer 1325 3D Printer STANDARD EQUIPMENT INCLUDES: - Complete control system - Print head - Dryer and granulate feeder - Software TECHNICAL DATA: - Output from 8 kg/h - Interchangeable nozzles ⌀ 3–12 mm - Air-cooled print head - Compact print head dimensions Iedexfq Dbjpfx Ahbstn - Motor power 1.5 kW

Condition: new, SLS Materials for Industrial & Compact SLS 3D Printers High-performance SLS powders for professional additive manufacturing – compatible with a wide range of industrial and compact SLS 3D printers, including EOS, Formlabs, Sinterit, Sintratec, Nexa3D, and Raise3D systems. Our SLS powders undergo extensive in-house testing to ensure reliable processing, excellent mechanical properties, and consistent print quality across multiple machine platforms. Designed for both industrial production and compact SLS systems, IM3D materials deliver professional performance without restricting you to a specific ecosystem. Available Materials PA12 Balance – €45/kg Cost-effective, all-purpose PA12 powder with excellent refresh behavior and reliable mechanical properties. PA12 Performance – €49/kg Enhanced PA12 material with improved elongation at break and increased impact resistance for demanding functional applications. PA12 Glass Filled (PA12-GF) – €44/kg Stiff, dimensionally stable PA12 material reinforced for tooling and engineering parts. TPU88A – €45/kg Flexible SLS material with excellent elasticity, durability, and impact resistance. Machine Compatibility Compatible with a broad range of SLS systems, including: EOS / EOSINT: P100, P110, P350, P360, P380, P385, P390, P395, P396, P450, P500, P700, P730, P760, P770 Formlabs: Fuse 1, Fuse 1+ Sinterit: Lisa, Lisa Pro, Lisa X, Suzy Sintratec: Kit, S1, S2, S3 Nexa3D: QLS230, QLS236, QLS260 XYZ Systems: MfgPro230 xS, MfgPro236 xS Raise3D: RMS220 SLS4All Innova MK1 Loopzizo K-100 More compatibility information: im3d.shop/printer-compatibility OEM Material Alternatives We offer alternatives and/or drop-in replacements for materials from Formlabs, Sinterit, Sintratec, and Raise3D, including: Formlabs PA11, PA12, PA12 Tough, PA12-GF, TPU90A Sinterit Flexa Performance, PA11 Onyx, PA11.5, PA12 Eco, PA12 Industrial, PA12 Smooth Sintratec PA12, PA12-GF, TPU88A Raise3D PA Next, PA Next GB, PA11, PA12, PA12 GB, TPU86A, TPU90A OEM comparison overview: im3d.shop/compare/oem Why Choose IM3D SLS Materials? Broad compatibility across industrial and compact SLS systems Itedpfx Ahjy Til Asbjn Excellent refresh rates and low cost per part Stable processing and consistent print quality Industrial-grade performance without vendor lock-in In-house tested and production validated Technical onboarding and support available Fast shipping from the Netherlands

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 4a99688d-3381-4979-8e5b-43, Year of construction: 2022, operating hours: 164 h, empty load weight: 530 kg, construction height: 525 mm, construction width: 400 mm, Equipment: CE marking, Submitting a bid obligates you to collect the item by the deadline of 28/02/2026! Hardly used demonstration machine! TECHNICAL DETAILS Build volume (single nozzle): 525 × 400 × 400 mm Build volume (multi-nozzle): 500 × 400 × 400 mm Build chamber volume: 84 l Layer height: min. 50 µm, max. 250 µm Accuracy: ±125 µm or ±0.0015 mm per mm Process: Fused Filament Fabrication, Continuous Fiber Reinforcement MACHINE DETAILS Isdpox Ttifsfx Ahbetn Temperature control: up to 200 °C Extrusion system: Direct-drive print head with two nozzles Materials Thermoplastics: Vega™, ULTEM™ 9085 filament, Onyx®, Onyx FR Continuous fibers: Carbon Fiber, Fiberglass, Aramid Fiber (Kevlar®), High Temperature Carbon Fiber, Carbon Fiber FR Dimensions & Weight Machine dimensions: 1,325 × 900 × 1,925 mm Weight: 530 kg Print head weight: 3 kg Operating hours: 164 h EQUIPMENT Eiger software Direct-drive print head with three nozzles Compatible with various thermoplastic and fiber materials Ethernet port IEC/UL/CSA 62368-1 certification CE mark EU Machinery Directive compliance

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during the liquidation of a company. Flowpack machine ITALDIBIPACK Dibiflow 500 – Year of manufacture 2021 – Very good condition For sale is a high-quality flowpack packaging machine from the manufacturer ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in very good, well-maintained condition and is ideal for the efficient packaging of a wide variety of products in tubular bags. Technical data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Connection: 400V – 3Ph + T + N – 50/60 Hz Ijdoxw S Ixepfx Ahbotn Power: 4.3 kW Weight: approx. 500 kg Equipment & Features Robust construction High-quality sensors for product and film detection Adjustable guide rails for different product widths Clean, modern control and drive technology Ideal for food, non-food, industrial products and more CE marking Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors and the entire mechanics are in very good condition (see pictures). Price Negotiable – €13,000 + €4,000 printer

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 28.22.0079, Year of construction: 2022, operating hours: 6,700 h, overall weight: 1,870 kg, laser power: 700 W, operating pressure: 8 bar, inner dimension height: 365 mm, inner dimension length: 280 mm, No minimum price – guaranteed sale to the highest bidder! The system has been serviced annually by SLM Solutions. Service reports and machine assessment are available upon request. The system includes the “SLM280 2.0 complete material change kit incl. PSM100” and a second set of filter housings, minimizing the effort required to switch between two materials. TECHNICAL DETAILS Laser power: up to 700 W Materials: suitable for all common materials in the SLM process Temperature range: 20–25 °C Relative humidity: max. 60 % Floor unevenness: max. 5 mm/m² Floor load capacity: min. 2,200 kN/m² Floor surface: antistatic, solvent-resistant, impermeable to liquids, smooth Processing area and process data Build volume (L x W x H): 280 x 280 x 365 mm Actual build rate: up to 113 cm³/h Variable layer thickness: 20–90 µm Minimum feature size: 150 µm Beam focus diameter: 80–115 µm Scanning speed: max. 10 m/s Laser type: IPG fiber laser Ijdpoy Rn A Isfx Ahbstn Single laser 700 watts Media supply Operating pressure argon: 7–8 bar Operating pressure nitrogen: 7–8 bar Operating pressure compressed air: 7–8 bar Operating pressure cooling water: 4 bar Compressed air quality: ISO 8573-1:2010 [1:4:1] Volume flow rate primary circuit: 1.4 m³/h Cooling water inlet temperature min.: 18 °C Cooling water inlet temperature max.: 20 °C Cooling medium: Coolflux MACHINE DETAILS Control system: SLM MCS Electrical connection values Connection: CEE 3/N/PE Voltage: 400 ±10 % V Frequency: 50/60 Hz Current draw: max. 40 A Connected load: 3.5–5.5 kW Heating power: 1,200 W Cooling power: 4.6 / 5.8 kW Largest motor: 7.5 kW Dimensions & weight Dimensions (L x W x H): 2,600 x 1,200 x 2,700 mm Shipping weight: 1,870 kg Operating hours: approx. 6,700 h EQUIPMENT Cooling is provided by “Cooling unit HRS050 L/W” Sieving station PSM100 V3 Handling device BPH280 and bottle lift (facilitates handling of powder containers and removal of substrate plates after printing) SLM280 2.0 complete material change kit incl. PSM100 Powder containers Substrate plates (1.2709 & AlSi10Mg) Additional filter housings Filter elements The system is currently still in operation and can be inspected by appointment. After the auction, the system will be disassembled by the machine manufacturer, loaded onto the company premises, and handed over to the buyer.

Condition: new, Year of construction: 2026, Technical data Control system: multi-axis real-time interpolator with active trajectory prediction. Communication via LAN, EtherCat, sampling time below 1 ms, correction map, RTCP, remote service access. Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1200 mm Drive system: Servo drives with EtherCat protocol, X and Y axes with hardened, ground helical racks, accuracy class 6; Z axis with ball screw, accuracy class 5. Linear guidance: Trapezoidal rails Travel speed: X, Y up to 45 m/min; C, A up to 6000 degrees/min Itedpfev Ramgsx Ahbon Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: Dual-sided master/slave with gantry angle correction Print heads: G.12 with output up to 12 kg/h G.20 with output up to 20 kg/h G.50 with output up to 50 kg/h G.200 with output up to 200 kg/h Construction: welded steel, ribbed, stress-relieved, precision machined We have extensive experience with a variety of materials, including: • Basic materials: PE, PP, ABS, PLA, PA, PC, PET, etc. • Advanced materials: PPS, PEEK, PEKK, etc. • Reinforced materials: carbon fiber, glass fiber, natural fibers.

Condition: new, Sample configuration: 2x 12m worktable 20kW Raycus fiber laser source Boci BLT461T+AB rotary axis FSCUT 9200 system Itedpfxjwxvl Ts Ahbsn HL-20000 water chiller Yaskawa servomotor Optional: air compressor

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts Itedpfew H Naaex Ahben

Condition: used, Inkjet printer for marking labels Isdpfx Ahszg I Nkebstn Additional title: Continuous inkjet printer; year of manufacture appr. 2010 - 2017 Capacity filling line appr.: 12000 bo/h Length: 440 mm Width: 395 mm Height: 470 mm Material: housing from stainless steel 1.4401 (AISI 316) Features: Print head with hose, controller with touchscreen

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, FAM CHD-3D | Meat Dicing Machine Manufacturer: FAM n.v. Model/Type: CHD-3D Serial number: 6238 Year of manufacture: 2005 Power supply: 400 V, 3 phases, 50 Hz Power: 7.5 kW Blade spacing: 4 mm and 20 mm Dimensions: 1350 x 1700 x 1900 mm Machine weight: 475 kg Rotational speeds: Iedpfozhgvrjx Ahbstn Impeller wheel (drum) max. 150 rpm, Circular blade shaft max. 850 rpm, Chopping blade shaft max. 1800 rpm Control enclosure: Rittal Type: AE 1008 Cabinet serial number: 127088 The professional industrial dicing machine FAM CHD-3D is an extremely efficient and versatile three-dimensional slicing machine, designed for continuous operation in the demanding conditions of the food industry. The machine is ideal for large meat processing plants. Its special design allows for the processing of even very large products without the need for pre-cutting, which significantly shortens the entire process time. The machine's operating mechanism is based on an advanced, three-stage cutting system. The product fed into the rotating drum (impeller wheel) is stabilized and first cut into slices by centrifugal force, then divided into strips by a system of circular blades, and finally, a precise shaft with chopping blades performs the final cut into perfect cubes. This technology guarantees perfect geometry and consistent slicing, minimizing waste and the formation of "ragged" edges. The entire construction of the machine is made of high-quality stainless steel, ensuring maximum resistance to aggressive cleaning agents and moisture. The heart of the drive is a powerful 7.5 kW motor, which easily handles hard raw materials, guaranteeing a performance level of up to 3000 kg/h (depending on the type and size of the raw material). This is a reliable investment for companies aiming to automate production lines and raise quality standards.

Condition: good (used), Year of construction: 2012, Gerber conversion software Easy-to-use software package with touch screen operation SPC Plus software Measurement: insufficient, excessive, or missing solder paste bridging paste deformations Itjdjx H Ryuspfx Ahben volume, height XY positions shadow-free measurement via dual-path projections 4 MPix high-speed camera, 20µm XY resolution, 0.37µm Z resolution approx. 60cm²/sec inspection speed Z-axis tracking SPC-Plus software package Max. PCB size: 510x510mm automatic width adjustment SMEMA interface Transport height 950 +/- 50mm QR code recognition 2D detection of bridges and smearing

Condition: excellent (used), Year of construction: 2015, 3D CNC image processing measuring machine with touch-trigger probe Measuring range (X × Y × Z): 300 x 200 x 200 mm Scale resolution: 0.1 µm Max. table load: 20 kg Image measurement accuracy: EUX,MPE/EUY,MPE = (1.5+3L/1000) µm Itodpfx Aoxztl Tohbjn EUZ,MPE = (1.5+4L/1000) µm EUXY,MPE = (2+4L/1000) µm L: measuring length in mm Optics: programmable zoom changer 1x-2x-6x Illumination: Transmitted light: white LED Coaxial light: white LED PRL: white LED