Used Sla 3D Printer for sale (5,954)

Condition: like new (used), functionality: fully functional, machine/vehicle number: SG78V34003, Year of construction: 2017, For sale is a very well-maintained HP MJF 4200 machine including Processing Station, 3x fully loaded Build Units, and various accessories (filters, etc.). The offer includes approximately 70 kg of new material and approximately 70 kg of used material as well as 3 new print heads and 5 liters of Fusing Agent. Only PA12 has been printed on this machine. There is an active HP service contract. Collection must be organized by the buyer or by HP. The machine is operational and ready for use in production and can be inspected in 88483 Burgrieden. Isdsxhdn Sjpfx Adnoa

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,486 h, total length: 1,840 mm, total height: 2,100 mm, total width: 1,270 mm, type of input current: three-phase, overall weight: 1,443 kg, input voltage: 400 V, input current: 32 A, Polyamide based SLS powder raw material. Max printing volume 34x34x60cm H. Loaded parameters : PA2200, Alumide, PA3200GF, PA2241FR. Recoater spring boxes changed at 1.000 wkg hrs. Recoater ( Red III ) changed at 1.200 wkg hrs. 2 printing boxes included. Iedexxgr Iopfx Adnea Screw compressor, generator, sand blasting machines included. Inquire for further details.

Year of construction: 2025, condition: new, new PMH filament line extruder 30 mm - 28 l/d Iedpfx Asch Sfqjdnea with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) with puller with filament accumulator (option) with winder and traverse guide MADE in GERMANY

Condition: new, Year of construction: 2024, Clearance sale of 3 new units – original packaging – immediately available! Isdpfxet A N Aqj Adnsa

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,075 h, total length: 483 mm, total height: 914 mm, total width: 564 mm, overall weight: 48 kg, For sale is an X7 3D printer from Markforged. The printer was used exclusively in a clean environment and is fully functional. Furthermore, the extruder and the print head were replaced recently, upgrading the printer to a Gen2 model. This also enables turbo printing. Iedpfx Aowhduusdnsa

Condition: used, functionality: fully functional, Year of construction: 2018, total length: 2,400 mm, total height: 2,945 mm, total width: 1,300 mm, type of input current: AC, overall weight: 2,900 kg, input voltage: 400 V, laser power: 3,000 W, One of the best model of the 3D metal printer model on the market. High tech, very accurate and fast, can print stainless and titanium. Made for aerospace manufacturing, but capable for other industries as well. Machine type: 3D printer Manufacturer: GE Additive Model: Arcam EBM Q20plus Year of construction: 2018 Condition: used Functionality: Fully functional Price 99000.- eur, loaded on truck. Best price you ever can buy such level printer. Packed into manufacturer boxes, ready to ship. Data from manufacturer: Max. build size 350 x 380 mm (Ø x H) Max. beam power 3kW Cathode type Single crystalline Ijdpfx Adsvmpq Tonea Min. beam diameter 140 μm Max. EB translation speed 8,000 m/s Active cooling Water-cooled heat sink Minimum chamber pressure 5 x 10-4 mbar Typical build atmosphere 4 x 10-3 mbar (partial pressure of He) He consumption, build process 4 l/h He consumption, ventilation 100-150 l/build Power supply 3 x 400 V, 32 A, 7 kW Size approx. 2,400 x 1,300 x 2,945 mm (W x D x H) Weight 2,900 kg CAD interface Standard: STL Materials: Arcam EBM Ti6Al4V Grade 5, P-Mtrl Arcam EBM Ti6Al4V Grade 23, P-Mtrl

Condition: not inspected (used), Dear Sir or Madam Iedpfjwktwksx Adnja We hereby offer you the following device for sale: Keyence Agilista 3200W 3D printer. The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Please inform us of your binding bid by 07.12.2025 at 10 am. You will be informed of the outcome of the auction within 72 hours of the end of the auction.

Condition: like new (used), functionality: fully functional, machine/vehicle number: D32070, Year of construction: 2021, operating hours: 41 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: DC, overall weight: 227 kg, input voltage: 220 V, Equipment: CE marking, For sale: Stratasys F370 (F123 Series) FDM Printer + SCA 3600—perfect for reliable, office-friendly production of functional parts, jigs & fixtures, and engineering prototypes. Package includes a substantial assortment of new, unopened consumables and print heads, as well as a Stratasys SCA 3600 support removal tank—allowing immediate, long-term operation. Key Features - Technology: FDM with soluble QSR support - Build Volume: approx. 355 × 254 × 355 mm (14 × 10 × 14 in) - Supported Materials (depending on print head): PLA, ABS, ASA, elastomers, ABS-CF10 - Supports soluble support material removal (NaOH/QSR) Includes (ALL supplied with the printer): Support Removal / Chemistry - 7× Stratasys sodium hydroxide (NaOH) boxes, ref 300-00600 - 1× QSR soluble support spool - 1× Stratasys SCA 3600 support removal tank Material Spools (all new) Iedoxk Tbgopfx Adnsa - 7× PLA Translucent - 1× PLA Light Blue - 1× ASA Yellow - 1× ABS Black - 1× ABS Yellow - 1× ABS Ivory Build Trays - 6× Standard build tray cartons - 1× High-temperature build tray carton Print Heads (all new) - 7× PLA Cooling heads - 4× PLA Extrusion heads - 4× Support/Model heads - 1× Elastomer head - 1× ABS-CF10 head Also included - Original accessories and cables - [User manuals / maintenance kit / crate—if applicable] - Test print prior to collection possible Logistics - Inspection: By appointment - Shipping: Palletized shipping available at buyer’s expense, or local collection possible - Payment: Bank transfer (invoice provided) Why choose this unit? A meticulously maintained F370 supplied with a rare, extensive set of build trays, print heads, and materials—covering PLA, ABS-CF10, elastomers, and more—plus the SCA 3600 tank for efficient soluble support removal. Minimize downtime and consumables lead time from day one.

Condition: excellent (used), Year of construction: 2019, operating hours: 1,500 h, 3D Printer Manufacturer: Stratasys Model: F370 Year of manufacture: 2019 Build volume (XYZ): 355 x 254 x 355 mm Layer thickness options: 0.330 mm, 0.254 mm, 0.178 mm, 0.127 mm Supported materials: ABS-M30, ASA, FDM TPU 92A, ABS-ESD7, PC-ABS, Diran 410MF07, ABS-CF10, FDM Nylon-CF10 Connectivity: Wired (Ethernet) and wireless (Wi-Fi) options Materials: Isdpfxjxk Uvlj Adnja Spools of 1470 cc: ABS white: 1 x 100% / 1 x 80% ASA grey: 1 x 10% PC-ABS black: 1 x 100%, 1 x 30% Spools of 980 cc: ABS blue: 1 x 10% TPU 92A: 1 x 100% QSR Support: 2 x 100%, 1 x 30% Accessories: - Build plates: 14 x new, 3 x used - Clean Station UW40 with large and small basket - Carrier 40 (cart for Cleaning Station) - Print head (TPU) new - Z-table Stratasys

Condition: used, functionality: unexamined, machine/vehicle number: EVO-lizer A4, Year of construction: 2015, operating hours: 4,413 h, total length: 720 mm, total height: 720 mm, total width: 540 mm, type of input current: AC, overall weight: 64 kg, input voltage: 230 V, input current: 4 A, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.05 mm, table width: 270 mm, tank capacity: 11 l, table length: 195 mm, noise level: 46 dB, number of print heads: 2, Used FDM 3D Printer EVO-lizer A4 Device Data: Printer dimensions (W x D x H): 540 x 720 x 710 mm Weight: 64 kg Connection data: 230 VAC; 50/60 Hz; 4A Ambient temperature: 15 – 35 °C Ambient humidity: 30 - 70 % Acoustic Data: Idle mode: 40 dBA Operating mode (1 m distance): 46 dBA Operating mode (40 cm distance, door open): 62 dBA Technical Data Sheet: Print bed size (W x D x H): 270 x 195 x 205 mm Minimum layer thickness: 0.10 mm Positioning accuracy: 0.05 mm Nozzle temperature range: 160 – 260 °C Print bed temperature range: 30 – 100 °C Filament material: ABS, PLA Filament diameter: 1.75 mm Software/slicing program: EVO-lizer Isdsxu I R Depfx Adnea

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, construction height: 200 mm, construction width: 270 mm, working length: 330 mm, Equipment: CE marking, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Build volume: 330 mm x 270 mm x 200 mm Layer height: from 50 µm Iodpfxexu E Sre Adnea Precision X, Y: 150 µm MACHINE DETAILS Technology: FFF + CFR (Continuous Fiber Reinforcement) Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon fiber, Glass fiber, Kevlar, HSHT Operating hours: 2,262 h EQUIPMENT Eiger software (cloud and local) Connections: Ethernet, Wi-Fi, USB Material dry box for safe storage Continuous fiber reinforcement: carbon fiber, glass fiber, Kevlar Enclosed build area for optimal thermal stability High-resolution optical encoders Prepared for Blacksmith (automatic dimensional calibration) Certificates: CE, FCC, UL, UKCA

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F170, Year of construction: 2018, operating hours: 2,732 h, Rarely used fully functional 3D Printer Iedpfx Asxhbxzednja Washing unit for cleaning of soluable support material included

Condition: like new (used), Year of construction: 2016, For Sale: EOS P 396 – Guaranteed Working Condition This EOS P 396 was purchased from EOS in 2022 by the previous owner and is now available for resale in fully guaranteed working condition. Before the sale, the machine is thoroughly inspected and revised by our experienced technicians to ensure top performance. The package includes: • 2 build frames • Hydac water cooler Iedpfstp Up Ejx Adnsa Additional accessories are available upon request. We offer transport in the original EOS packaging and provide professional installation services to ensure a seamless experience. Warranty and maintenance plans are available to suit your needs. For more information or specific requests, please don’t hesitate to contact us. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS SLS machines and unparalleled support. With our team of ex-EOS technicians, we are the only provider in the market offering a complete solution for used EOS equipment—including installation, maintenance, repairs, upgrades, and consumables. What sets us apart: • Guaranteed reliability: Every machine is inspected and revised before delivery. • End-to-end support: From transport and installation to tailored maintenance plans, we’ve got you covered. • Expertise: With years of experience in the SLS industry, we ensure that your machine runs at its best. • Exclusive offerings: Unique materials, accessories, and service plans designed specifically for EOS users. Choose IM3D for unmatched expertise, value, and service. Feel free to reach out to learn more about how we can support your SLS production needs!

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,600 h, total length: 800 mm, total height: 1,100 mm, total width: 1,150 mm, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, positioning accuracy: 0.02 mm, Equipment: compressor, The industrial IDEX System 3D Printer EL-102 V2 + Upgrade Kit is capable of processing both plastic and metal filaments! Original price: €62,000 Technical specifications: Build volume / print size (W x D x H): 500 x 400 x 510 mm Extruder: 2 units, independent along one axis. With cleaning station. Print bed temperature: 200°C Build chamber temperature: 100°C – for high reproducibility, increased strength, and reduced internal stress in printed parts Nozzle temperature: 420°C Display: 10.1-inch touchscreen display Closed-loop drive system Precision: Linear axes with ball screw drives for maximum accuracy Connectivity: WLAN, LAN, and USB interface (controllable via web browser) Isdpfoxt N A Sox Adnsa Enclosure ventilation: Activated carbon filter Water cooling Compatible with third-party filaments Filament drying: up to 2 x 10 kg spools

Condition: excellent (used), 3D Metal Printer Manufacturer: CONCEPTLASER Model: M1-2010-01-01 Year of manufacture: 2010 Build volume: 250 x 250 x 275 mm Compressed air: 7 - 8 bar Inert gas: 5 bar Supply voltage: 3/N/PE AC400V +/-10% 50 Hz Materials: CL50WS: 50 kg and CL91REW: 40 kg Equipment: - 1 Rofin fiber laser StarFiber 200 with 200 W - 1 process chamber (can be inertized) Iedpfxjxk T Ndo Adnsa - 1 loading station - Nitrogen generator incl. 1000-liter pressure vessel - Conceptlaser automatic sieving station (2 material sets) - Explosion-proof vacuum cleaner Manufacturer: Ruwac, Year: 2023 - Various accessories (filters, seals) - Machine operating hours: 16,620 h - Laser source operating hours: approx. 11,000 h

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 140L-C, Year of construction: 2022, operating hours: 5,854 h, total length: 1,450 mm, total height: 1,040 mm, total width: 1,250 mm, type of input current: AC, overall weight: 380 kg, input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, electrical fuse: 16 A, table width: 500 mm, tank capacity: 140 l, table length: 700 mm, power: 8.3 kW (11.28 HP), travel speed (max.): 24,000 mm/min, number of print heads: 2, Refurbished Industrial Fused Filament Fabrication (FFF) Printer Includes: - 140L-C printer - Vibration-damped platform - License for slicing software (Simplify3D) Original price €73,800 General Technical Data: Model: HAGE 3D-140L-C Year of manufacture: 2022 Operating hours: 5,854 h Printing technology: FFF (Fused Filament Fabrication) Filament diameter: 1.75 mm; open material system (not limited to specific manufacturers) Build area (L x W): 700 mm x 500 mm Maximum print height: 400 mm Maximum build volume: 140,000 cm³ Dimensions and Weight: Length: 1,450 mm Width: 1,250 mm Ijdoxuh Nyspfx Adnoa Height: approx. 1,040 mm Weight: approx. 380 kg Temperature: Maximum printhead surface temperature: 300°C (optionally 450°C) Maximum build plate surface temperature: 180°C Maximum chamber temperature: 85°C Minimum operating temperature: +10°C Maximum operating temperature (ambient): +40°C Electrical Data: AC input: 400 V / 50 Hz Power supply: 24 V DC Connection: USB 3.0 / Ethernet Print Specifications: X-axis speed: up to 400 mm/s Y-axis speed: up to 400 mm/s Z-axis speed: up to 300 mm/min XY-plane print accuracy: < 0.1 mm Printer Control: Industrial controller (Sigmatek) Software: HAGE3D All documentation available Platform: 1,450 x 1,250 x 600 mm (LxWxH) Including storage compartments Including machine feet with vibration damping

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: C362922, Year of construction: 2023, overall weight: 550 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, laser source model: Solid State BlueEdge, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Working area Working area (X): 300 mm Working area (Y): 300 mm Working area (Z): 500 mm Layer thickness: 10–100 µm MACHINE DETAILS Technology: Laser Stereolithography (SLA) Laser source: Solid State BlueEdge Scanning method: Galvanometer Input file formats: .stl, .slc, .nauta, .fictor, .mkr, .3dm, .3ds, .ply, .obj, .lwo, .x Operating conditions Operating temperature: 20–25 °C Humidity: 60 % Electrical data Power supply: AC 230 V / 50 Hz Power consumption: 500 W Dimensions & Weight Machine dimensions: 704 × 1,446 × 2,420 mm Weight: 550 kg EQUIPMENT Software Ports: USB / Ethernet Compatible with: wide range of DWS resins (transparent, technical, elastic, functional) Iedpfx Adexu E H Nonoa Intuitive control and user interface

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 10100074, Year of construction: 2023, operating hours: 20 h, 💡 Unique Opportunity – Ex-Dealer Showroom Machine This machine comes from the demo showroom of a former official Markforged and DWS dealer, who was active on the Italian market until 2025. It was used exclusively for demonstration purposes, maintained in excellent condition, and has extremely low operating hours. Now available through 3D Machineries Srl, this is a rare chance to purchase an industrial 3D printer in practically new condition at a fraction of its original cost – ready for immediate delivery with complete transparency regarding its origin and usage history. -----LISTING DESCRIPTION----- DWS – XPRO SL – 3D Stereolithography (SL) Printer Isdpfxswzmhwj Adnja 📍 REF: 10100074 – SN: C362922 – Year: 2023 🆕 DEMO UNIT – USED ONLY FOR CLIENT TESTS DWS Digital Wax XPRO SL professional 3D printer, designed for high-precision applications with SLA (Laser Stereolithography) technology. This machine is as good as new, manufactured in 2023, and was used solely for brief demonstration testing at the official DWS showroom. It is perfect for companies seeking a professional plug-and-play system at a significantly lower cost than new equipment. ✅ Key technical data: Model: DIGITAL WAX XPRO SL REF: 10100074 SN (Serial Number): C362922 Year of manufacture: 2023 Origin: DWS showroom display Condition: Excellent – minimal use (only for testing) Technology: SLA (Laser Stereolithography) Manufacturer: DWS Srl – Thiene (VI), Italy Made in Italy ⚙️ Technical features (generic for XPRO SL model): Ideal for: aesthetic and functional prototypes, high-precision components Ultra-high resolution: for fine details and industrial-grade surface finishing Compatible with: wide range of DWS resins (transparent, technical, elastic, functional) Proprietary software included Intuitive controls and user interface Connections: USB / Ethernet ✅ Perfect for industrial design, jewellery, dental labs, biomedical/medical, precision mechanics 💡 Unique opportunity: 2023 machine, virtually new, at a significantly reduced price compared to the official list. 📩 Contact us for further details, additional photos, the official DWS price list, or to arrange a viewing of the machine.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Z50009537, Year of construction: 2018, operating hours: 167 h, total length: 50 mm, total height: 81 mm, total width: 57 mm, type of input current: DC, overall weight: 41 kg, input voltage: 220 V, table width: 305 mm, table length: 305 mm, For sale significantly below market value: a professional Replicator Z18 3D printer that has seen very little use (only 166 operating hours). Extra-large build area: 30.5 x 30.5 x 45.7 cm Features: - Supported by the new, user-friendly MakerBot Replicator 3D Printing Platform - Cloud-based system with application support - MakerBot Replicator Smart Extruder, motion controller, and new axis design - Integrated onboard camera and diagnostics, assisted calibration - Large build volume allows for rapid prototyping and model production - 11% larger print area than the MakerBot Replicator 2 Build volume: - 25.2 L x 19.9 W x 15.0 H cm - 7,522 cubic centimeters Easily and quickly produce realistic objects - On-demand printing capability Ijdpfx Adoxt Er Asnoa - 100-micron resolution: print ultra-thin layers - Create professional-quality, high-resolution prototypes and complex models - Fine surface finish with no need for post-processing - Produce realistic prototypes and models for presentations Includes: - 3.5" color LCD display: onboard user interface for a rich user experience - Access your personal library and preview 3D files - Onboard utility for setup and maintenance MakerBot Replicator Smart Extruder (print head): - Easily replaceable - Detects filament outage and pauses printing automatically - Sends notifications to MakerBot Desktop and MakerBot Mobile app Onboard camera: - For print monitoring and sharing on MakerBot Thingiverse or social platforms - Mobile control option

Year of construction: 2019, condition: used, Technical details: control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm SLS Laser System IR Laser Diode 5 (W) Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h heating system with max. chamber temperature: 200°C Accessories: Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) Iodpju N Auuofx Adnoa various bottles with polyamide powder div. small parts *

Condition: used, Year of construction: 2019, functionality: fully functional, resolution (max.): 360 dpi, paper width (min.): 290 mm, paper width (max.): 750 mm, paper height (min.): 360 mm, paper height (max.): 1,200 mm, Digital screen printing machine with hot foiling unit. Year of installation: 2019. Minimum print format: 29x42 cm, maximum: 75x120 cm. In excellent condition. Isdsxrz T Topfx Adnea

Condition: excellent (used), Year of construction: 2007, For sale is a Dimension BST 3D printing center with serial number P1588. The center was used as a test center Interior component Ijdpfx Aeh Uc Iqednsa Table 203x203x305 mm Nozzle head computer controlled Material cassette automatically reloadable Technical data Dimension dimensions 686x1041x914 (WxHxD) Weight 136 kg Max construction volume 203x203x305 Electrical connection 230V, 60hz, 15A Accessories: - power cord - 20 material cassettes - instruction manual - Basic training manual - Div Software - 29 Table tops Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible!

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Iedpexu Ewzsfx Adnea Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, 💡 Unique Opportunity – Ex-Official Dealer Showroom Machine This machine comes from the demonstration showroom of a former official Markforged and DWS dealer that was active in the Italian market until 2025. It was exclusively used for demonstration purposes, kept in excellent condition with very low usage hours. Now available through 3D Machineries Srl, it represents a rare chance to acquire an industrial 3D printer in near-new condition at a fraction of the original price – with immediate availability and complete transparency regarding its origin and usage history. -----AD DESCRIPTION----- Markforged X7 Gen 2 – Composite Materials (CFR) 3D Printer – Demo Unit For sale: Markforged X7, a top-tier industrial 3D printer featuring Continuous Fiber Reinforcement (CFR) technology, designed for manufacturing high-performance functional parts. The machine was installed on and has just 2,262 operating hours, exclusively for showroom demonstrations. Originating from an official Markforged dealer now in liquidation. ✅ Condition: Excellent – only used for demos ✅ Installation date: ✅ Printing hours: 2,262 ✅ Serial number: 21450012211002129 ✅ Origin: Official dealer showroom ✅ Continuous fiber reinforcement: carbon fiber, glass fiber, Kevlar® ✅ Included software: Eiger (cloud and local) ✅ Dry Box for safe material storage included Technical specifications: Technology: FFF + CFR (Continuous Fiber Reinforcement) Build volume: 330 x 270 x 200 mm Enclosed build chamber for improved thermal stability Layer height: from 50 µm Ijdpfx Adowzmd Ejnsa Accuracy: ±150 μm (X,Y) High-resolution optical encoders Connectivity: Ethernet, WiFi, USB Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon Fiber, Glass Fiber, Kevlar®, HSHT Certifications: CE, FCC, UL, UKCA Ready for Blacksmith (automated dimensional calibration) ✅ Perfect for aerospace, automotive, industrial manufacturing, advanced prototyping, defense 💡 A unique opportunity to acquire a professional CFR 3D printer at a competitive price! 📩 Contact us to receive the technical data sheet, videos, full documentation, or to schedule a viewing.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: FPR3016042306000126, Year of construction: 2023, operating hours: 1,530 h, 💡 Unique Opportunity – Showroom Machine from Official Dealer This machine comes from the demonstration showroom of a former official Markforged and DWS dealer, active in the Italian market until 2025. It has been used exclusively for demonstration purposes, maintained in excellent condition with very few operating hours. Now available from 3D Machineries Srl, it represents a rare chance to purchase a virtually new industrial 3D printer at a fraction of the original cost – with immediate availability and full transparency regarding its origin and usage. -----LISTING DESCRIPTION----- 🖨️ Markforged FX20 – Industrial 3D Printer for Composite Materials 🔧 Model: FX20 🔢 Serial Number: FPR3016042306000126 📅 Year of Manufacture: 2023 🏷️ Condition: Demonstration – from showroom 📦 Packaging: Original, machine packed and ready for shipment 📍 Location: Turin, Italy 🧩 Description The Markforged FX20 is the most advanced 3D printer for high-performance composite materials, designed for the most demanding industrial applications. It prints with materials such as Onyx™, ULTEM™ 9085, and continuous carbon fiber, glass fiber, and Kevlar. With a large build volume and a heated chamber up to 200°C, it enables the production of strong, lightweight functional components, ideal for aerospace, automotive, defense, and advanced manufacturing sectors. 📐 Key Features Build volume: 525 x 400 x 400 mm Technology: FFF + CFF (Continuous Fiber Fabrication) Heated chamber: Up to 200°C Compatible materials: Onyx™, Carbon Fiber, Fiberglass, Kevlar, ULTEM™ 9085 Software: Eiger™ (cloud or on-premise) Connectivity: Ethernet, Wi-Fi Isdpfx Aewy Uiasdnea Power supply: Multivoltage 200–415V, 50/60Hz, three-phase 🧾 Certifications and Compliance CE, FCC, UKCA, ETL, CSA Compliance: UL 2011, NFPA 79, CSA C22.2#301 Manufactured in the United States 📦 Included in the Sale Markforged FX20 3D printer Original packaging Standard accessories Technical documentation Residual demo materials upon request ✅ Condition Demonstration machine, never used in production As-new condition Immediately available for inspection or shipping