Used Mafell Zs 200 E for sale (10)

Condition: like new (used), Hand band saw Hema, 230V, original condition Gedju Im Ddspfx Afieuh

Condition: used, Technical specifications: Gedpfev U Dlhjx Afijuh Cutting depth: 260 mm Cutting depth at 45°: 184 mm Cutting depth at 60°: 130 mm Pivoting to both sides: -60° - +60° Nominal idle speed: 3000-3600 rpm Nominal power consumption: 3000 W Weight: 13.3 kg Universal motor: 230 V / 50 Hz Includes: Transport trolley for hand-held band saw

Condition: used, Exhibition machineDescription:The new ZSX-TWIN Ec carpentry chainsaw is the practical solution for large-dimensioned wood components. MAFELL has created a new dimension with the development of the twin-engine chain saw, with which previously almost impossible and time-consuming work can be implemented effortlessly and accurately. With a rated power of 3000 watts, even one CUprex motor brings the 230 V mains to its power limit. Two CUprex motors at the same time would bring any simply fused lighting power supply to its knees. If the power is distributed over two circuits, the two-motor ZSX gets the power it needs. This is precisely the power grid that offers us, since here the phases are fused separately from each other and the grid is therefore not antage Benefit:Thanks to the use of light current technology, the ZSX TWIN weighs only 20 kg with 6,000 watts of rated power. This enables it to make longitudinal cuts up to a cutting depth of 400 mm! In wood construction and solid wood wall cutting, corner cuts are often necessary. Thanks to the vertical cutting tool, cutouts and overlaps can be made quickly and accurately. Time-consuming turning of the wood components is no longer necessary. At the heart of the ZSX-TWIN Ec are the two 3,000-watt luminous flux motors. They are operated in parallel on two 230 V phases from the power grid. The ZSX can be swiveled from -15° to 60° exactly according to lication:Longitudinal and cross-sectional cutouts Material use e.g.: Solid wood, glue laminated beamsTechnical data:Cutting depth 400 mm Cutting depth at 15° 386 mm Cutting depth at 30° 346 mm Cutting depth at 45° 282 mm Cutting depth at 60° 199 mm Swiveling on both sides -15° - 60° Cutting width 6.8 mm Rated idle speed 21000 1/min. Nominal input 2 x 3000 W Weight 20,0 kgScope of delivery:1 Chain saw ZSX TWIN Ec 1 Longitudinal cutting chain TWIN HM 400 No.: 006977 1 Fine cutting chain HM 400 No.: 006972 1 Transport carriage ZSX-Twin Ec No..: 205940 1 Glider for guide bar insert No.: 205934 1 Rip fence No.: 204591 1 Combination screwdriver 6 mm No.: 093272 1 Open-end wrench 13 mm No.: 093008 1 Connection cable 10 m complete with CEE plug 400 V No.: 087906 Gusdpevwfy Sefx Afijh

Condition: like new (used), Year of construction: 2024, power: 6 kW (8.16 HP), Mafell ZAF 250 demonstration machine (max. 2-3 used for demonstration purposes) Item No.: 991201 Included in delivery: -1 milling head, complete with reversible blade; Order No. 202105 -1 support table, Order No. 205025 Maximum timber dimensions (W x H) at right angles: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Length of support with scale: 3000 mm Feed speed: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idle speed: 6670 rpm Nominal power consumption: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly, accurately, and efficiently. -Straight tenons, angled tenons, corner and ridge joints - with the compact ZAF 250 Vario, you're on the safe side. -An exact length scale can be adjusted using a stop. -The milling tool, specially developed for the ZAF 250, can be quickly adjusted for different tenon lengths and for tangential milling. -The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. A built-in laser assists you in the exact positioning of the wood. Result: Milling cuts accurate to the millimeter in any wood! -After setting the tenon geometry, the milling head automatically follows the tenon shape and delivers the desired tenon – including face-off, shouldering, and chamfering. -The ZAF 250 Vario has an adjustable feed rate for hardwood applications. Area of application: -Tenon and tangential milling up to 60° -Materials used, e.g., solid wood and laminated timber Advantages: Gsdpfx Aswazn Ajfijuh -Significant time savings – thanks to simple and quick adjustment of length, angle, and tenon dimensions. -Maximum wood dimensions: 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – the pivoting head ensures the workpiece always remains in the same position. -No wood waste – fully vacuumable.

Operating hours: 7 h, condition: as good as new (ex-display), functionality: fully functional, Micro-stationary system for the production of a zero joint - jointless optics as if from a single casting A machining table is also available as an option - Heating time:ᐸ30Sekunden - max. edge height 65mm (option 103mm), max. edge thickness 3mm - Processing of so-called "laser edges" (co-extruded and post-coated edges, as well as old-classically pre-coated EVA hot-melt adhesive edges) - higher heat resistance and water resistance - perfectly straight, inclined, curved and round panel materials as well as moulded parts can be processed. - sloping cut surfaces of up to 55° (installation in the available table) - high process reliability & lower follow-up costs; - no glue change necessary = almost no set-up costs; - no burning of the glue; - no glue residue on the workpiece - Infinitely variable feed speed from 1 to 5.5 m/min. - continuously adjustable hot air up to 520°C - 230VoltAC, 4m connection cable, compressed air hose - 3,05kW - low air requirement, assembly compressor is sufficient The zero joint unit can be used mobile as well as micro-stationary! Gedpfxod St R Ss Afisuh Optimal e.g. for larger moulded parts and for use on the construction site. For this purpose, a Systainer with an additional supply line for electricity and compressed air is included in the scope of delivery. The system is also available for retrofitting in an edge banding machine (Hot air, Airtec) - please ask us

Condition: excellent (used), Year of construction: 1986, MAFELL Erika table saw, with side adjustable stop Guodpfxeud At Ro Afish

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1308650, overall weight: 393 kg, saw drive: 6,000 W, rotational speed (max.): 6,670 rpm, input voltage: 400 V, Product Details - With the ZAF 250 Vario, all tenon shapes can be produced quickly, precisely, efficiently, and with perfect fit. - Straight tenons, angled tenons, corner joints and ridge joints – with the compact ZAF 250 Vario, you are always on the safe side. - An exact length scale can be set using a stop. - The milling tool, specially developed for the ZAF 250, can be adjusted in seconds for different tenon lengths and for joint milling. - The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. An integrated laser assists with the exact positioning of the timber. The result: millimeter-precise milling on any type of wood! - After setting the tenon geometry, the milling head automatically follows the tenon profile, producing the desired tenon – including trimming, shouldering, and chamfering. - The ZAF 250 Vario offers an adjustable feed rate for hard wood applications. Field of Application Gusdpfx Afjwwkxfeioh - Tenon and joint milling up to 60° - Suitable materials e.g.: solid wood and laminated timber Advantages - Significant time savings thanks to simple and fast adjustment of length, angle, and tenon dimensions. - Maximum timber dimensions: 500 x 250 mm at 0° and 220 x 250 mm at 60°. - Minimal space requirement – the pivoting head keeps the workpiece in the same position at all times. - No offcut waste – fully extractable.

Condition: ready for operation (used), Technical characteristics Power and Motors Overall dimensions Gsdpot Dgapsfx Afijuh Weight: 9 Kg

Condition: new, weight of the machine ca. 392 kg Gjdpfx Afovwgfveieuh

Condition: new, Technical data:Rated voltage 230 VRated input 3050 WEdge height 10 - 65 mmSwiveling range 0 - 50 °Edge thickness 0.4 - 3.0 mmHeating time 30 sTemperature max. 520 degrees CelsiusFeed stepless 1 - 5.5 m/minDimension (L x W x H) 220 x 160 x 360 mmConnection compressed air 6 - 10 barInner radius min. 10 mmWeight 10.8 kg Guodpfxswi Nt Eo Afioh