Used Sign Boards for sale (7,567)

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: limited functionality, working width: 1,800 mm, type of input current: three-phase, total width: 2,400 mm, total length: 2,000 mm, total height: 2,200 mm, overall weight: 2,300 kg, additional equipment features: Complete with 6 de-reeling stations, Following consultation over 5 years with major UK manufacturers, production units, including working within factory which builds these machines, this machine was commissioned and built for experimental works to enable proof of concept for UK Government / Ofgem. This machine is built with steel welded frames to robust industry standards and fitted with 202mm diameter mandrel. Other mandrel sizes can quickly and easily be fitted. Six robust steel framed de-reeling stands – on wheels - are included, A steel framed deluge system is included. An alternative individual application system by manifold of a new, unused Grunfeld GRS 5 - One component dispense system, can be included if required, enabling glue supply to individual reels. The electronic controller is by Hartec Control systems, with infinite capstan speed control. Current equivalent machines by Spiraltech start at over £100,000 ! Capstan angle manual control is industry tradition, as once set, no adjustment is needed. Todpezma E Djfx Amyea Approx 10 paper reels are supplied FOC for pretest alignment. Specially incorporated accessible gearbox readily disconnected from motor. Brand new electric 3 – phase motor with less than 10 hours useage. Selection of forming belts to suit differing materials.

Condition: good (used), Hazard lights, night markings, flashing lights, day/night markings -Signal lights for: Wind turbines -GF light: RE-LED 864 (Red) -Housing: aqua signal Tsdjfkph Ujpfx Amyoa -Price: per piece -Quantity: 2 pieces -Dimensions: 380/356/H290 mm -Total weight: 15 kg

Condition: used, SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; Tsdpfx Ajwxxz Remyoa - Switchboard. SIGNODE automatic Strapping: Machine Model M400/PA/TSM for vertical strapping Pneumatic strapping floating head: for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness 450 kg. jumbo coil dispenser: with electrical unwinding Switchboard: Included

Condition: used, Year of construction: 1998, Format: 1100 x 900 mm Equipment: W 1100mm x L 900mm Max format W 90mm x L 50mm Min format 200-800gsm plus capable to run E/F Flute Longitudinal seam bonding Todpozg Icdofx Amyja double longitudinal seam bonding

Condition: excellent (used), machine/vehicle number: 71080, Available: immediately Todjh Ek U Dopfx Amyja

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Todpfxszavluj Amyoa Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens 810 D, total length: 6,500 mm, total width: 3,500 mm, overall weight: 9,000 kg, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis vertical machining center from Unisign, model Univers 4, year of manufacture 2004. The machine is used but in good condition, fully functional, and has been regularly maintained. Special feature: second milling spindle (replacement spindle included). Operating hours: 19,357 Technical Data -Traverse paths: X = 1600 mm / Y = 400 mm / Z = 400 mm -B axis: A axis (360° x 0.001°) 20 rpm -Spindle speed: 0 – 9000 rpm -Control: Siemens Sinumerik 810D -Table size: 1 bridge with 4 sides, L 1800 mm, 4 x 113 mm -Table load capacity: approx. 150 kg -Working feed rate: 5 – 28,000 mm/min -Rapid traverse (X/Y/Z): 28,000 mm/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 44 stations -Tool diameter: approx. 70 mm (up to 200 mm with free adjacent slots) -Max. tool length: approx. 240 mm -Max. tool weight: 5 kg -Max. total weight of tool magazine: approx. 200 kg -Tool change time: approx. 8 sec Machine Requirements & Dimensions Todjx Iputjpfx Amysa -Total power requirement: 14 kW -Machine weight: approx. 9000 kg -Footprint (LxW): approx. 6.5 x 3.5 m Equipment & Accessories -Coolant system (approx. 480 L, internal & external emulsion) -Clefil RBF-E100 20 bar pump unit -Chip conveyor -Rinse gun in machining area -Hydraulic/pneumatic clamping options in machining area -Enclosed work area cover in accordance with safety regulations (UVV) -Röhmheld hydraulic aggregate (max. 500 bar) -Automatic probe RWP20.00 -Various SK40 holders -Technical documentation & floor plan available Maintenance -Regular maintenance performed -Hydraulic and pneumatic hoses partially renewed -LT module replaced in control cabinet The machine is immediately available and ready for operation. If interested or if you have any questions, please get in touch! All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: excellent (used), Year of construction: 1980, - saw Tsdpjp Sugfofx Amyja - moulder - thicknesser planing width 210mm planing height 120mm tool change is done by changing the position of the belt.

Year of construction: 1978, condition: used, 1,2 t, Coil OD 1.650 mm Tjdpetn Diefx Amysa 20 - 300 x 0,4 - 3,5 mm

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 36,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, number of axes: 3, This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details. • Space requirement: approx. 12 x 11 m • Passage: height 1,000 mm / width 1,500 mm • Max torque: 720 Nm • Gearbox: 2-stage, ratio 1:4 • Machining capacities (C45): drilling 120 mm dia / tapping M55 / milling 100 cm³/min • Construction: Gantry design with movable portal bridge and stationary clamping table • Table configuration: Clamping bars in transverse direction with 750 mm spacing (standard plate fields omitted) Todpsy A Ifmjfx Amysa • Tool changer: Automatic tool change; 30-pocket chain magazine on the portal column (capable of tool change into the angular head) • Operation mode: Pendulum machining capability • Cooling: Machine cooling unit; water-air heat exchanger integrated into the control cabinet • Coolant system: Operated dry; pre-fitted/ready for coolant use • Maintenance status: Tool magazine and X1/X2 ball screws completely overhauled in 2023; last manufacturer maintenance in 2023 • Installation: Machine recessed and anchored in a foundation pit Additional equipment • Angle boring and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit • Probing: RWP20.50-M probe; plus 1 spare Hexagon RWP 20.50-M probe • Hydraulic clamping device with clamping bridges for axis machining, including hydraulic unit • 1x T-slot clamping field (2500 x 1200 mm) as an alternative to the hydraulic fixture • Chip conveyor: Hinged belt type • Safety fence with Sick light grids • Makrolon curtains on both sides of the bridge (motorized height adjustment) • Separation wall with viewing window • Setup and leveling elements • Diverse spare parts • Documentation included Technical Specification Taper Size SK 50

Condition: used, Year of construction: 2021, UV curing oven in operational condition. Possibility for 2 units. Ask for a quotation! Todpoy Nzb Ujfx Amyea

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HY-43, screw diameter: 110 mm, total width: 2,500 mm, total length: 8,500 mm, total height: 9,500 mm, power: 350 kW (475.87 HP), Equipment: documentation/manual, The two-layer blow molding machine is a new generation of plastic extrusion blow molding equipment. It is mainly used for molding kayaks, canoes, surfboards, and other large hollow plastic products. The machine uses a motor designed to deliver high torque and sufficient power for material cutting. The molten plastic is extruded into a storage die head. When the material reaches the preset volume, the wall-thickness control system continuously adjusts the opening ratio. Tedpfox R R Igex Amyea The extruded material is formed into a parison, which is then molded into the final product.

Condition: used, Year of construction: 1996, x-travel 3000 mm y-travel 1500 mm z-travel 400 mm Serial number 7872 chip conveyor MAYFRAN 40.6GS-HR/SP20 control SIEMENS SINUMERIK 820 table surface area 3000 X 1500 mm table load 1000 kg / m2 Tool changer 52 stck. weight of the machine ca. 15000 kg UNISIGN - Uniport 4 - Machining centre - Vertical Technical details will be added shortly 40820 operating hours including chip conveyor from the manufacturer MAYFRAN with TYPE 40.6GS-HR/SP20 Total weight: 15,000 kg Tsdpfx Amoud Ixloyja

Condition: excellent (used), Year of construction: 2014, operating hours: 5,100 h, functionality: fully functional, type of input current: three-phase, Signode (Haloila) Octopus Compact – Automatic Pallet Stretch Wrapper (2014) Manufacturer: Oy M. Haloila Ab, Finland (brand now part of Signode) Model: Octopus Compact Year of manufacture: 2014 Type: Automatic pallet wrapping machine (rotary ring – load remains stationary) Compliance: CE marked Description Tedpfxsyhw Hpj Amyja For sale: Signode / Haloila Octopus Compact automatic pallet stretch wrapper. This is a rotary ring system where the pallet stays stationary while the wrapping ring rotates around the load. This design is particularly suited for light and unstable loads, as the pallet does not rotate during the wrapping process. Electrical specifications (from rating plate): 3~ 400 V, 50 Hz Power: 7 kW Current protection: 3 × 14 A Delivery / Incoterms EXW / FCA / DAP terms available. Loading and transport can be arranged upon request. Further information on request Photos and videos of the machine in operation, transport dimensions/weight, and the precise equipment configuration (conveyors, safety fencing, automation interface, options) are available. Contact: Please send a message for full details and a quotation.

Year of construction: 2018, condition: ready for operation (used), Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation. Tjdpfx Aoihp Ipjmyja

Condition: used, MAIR Automatic packaging machine MPS RH150/D/4/SL & SIGNODE Automatic strapping unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL Model MPS RH150/D/4/SL Pat. automatically packs round tubes in hexagonal bundles. The Machine allows the strapping operation to be carried out automatically in a fix position, with the bundle moving sideways and stopping automatically at the programmed strapping positions. It is composed of: - Four tube lift chain conveyors with carrier teeth and intermittently driven for the lifting of one tube at a time, coming from the threading machine, to the aligning area; - One driven rollway to align the tube against an adjustable end-stop, before the row formation; - Two storage areas for the tube row; necessary during the bundle evacuation cycle; - One sturdy structure in welded structural steel, forming a bridge; - Tube row handling system which picks up a row of tubes at a time from the second row storage and places it down onto the bundle forming brackets. Tjdpfx Amoymahyeyja - Handling is performed by a series of electromagnets which perform a rotary movement during the row transfer cycle; - Four driven vertical brackets for bundle formation and holding. They are provided of adjustable blades according to the required bundle size and shape and they will be lowered in order to allow the bundle laying down on the evacuation trolley. - Driven evacuation trolley, sliding on rails fixed to the floor and equipped with lower driven rollers and pairs of retaining vertical loose rolls. - Driven flat conveyor to transport the bundle after the strapping area. - Driven storage chains suitable to approach bundles at the selected quantity. - Drainage station for bundle lifting, to allow the coolant outlet from tubes; it is equipped with two hydraulic devices driven by a hydraulic power pack. - Control switch cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. 3. WEIGHING STATION Model KG8/DY The weighing station weighs tube bundles by means of load cells. Bundles are transferred by the driven storage chains to the weighing position. The Weighing Station is located under the pneumatic lifting devices which will lift the bundle in order to allow the weighing operation. It is composed of: - Bottom frame to be fixed to the floor, complete with four supports, linkages and loading cells. - Top holding frame, able to receive the bundle lifting devices. - Compact weight transmitter. 4. MANAGEMENT INFORMATION SYSTEM Model DATAPACK 3/T The Datapack Management System software allows the operator : - To control and monitor tube production in real time. - To set the a new bundle configuration with its strap application positions. - To store the various bundle configurations and strap application positions into an archive where they can be easily retrieved. - To create batches of different bundle configurations and then load them into one production sequence. - Monitor all alarm and fault messages (trouble...

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), gearing type: hydrostat, fuel type: gasoline, Year of construction: 1998, Line marking machine: Tjdpjx Ek Tfefx Amyja + ProSign + Citadine + Self-propelled – hydraulic – forward and reverse + Airless pump + Line spray gun + Hand spray gun + Honda GX160 engine, 5.5 HP + Year of manufacture: 1998 Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: ready for operation (used), Year of construction: 1990, Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible. Todpfew U T Ucsx Amyja

Condition: refurbished (used), Year of construction: 2019, operating hours: 4,982 h, functionality: fully functional, machine/vehicle number: SR2512-100-228, number of ink cartridges: 5, color channels: 5, number of print heads: 3, resolution (max.): 1,200 dpi, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 100 mm, paper width (max.): 2,500 mm, paper height (min.): 1 mm, paper height (max.): 100 mm, total length: 2,100 mm, total width: 4,700 mm, total height: 2,100 mm, space requirement length: 3,000 mm, space requirement width: 6,000 mm, space requirement height: 2,000 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 32 A, input voltage: 380 V, SignRacer UV Digital Printing System - SR2512 Flatbed Digital Printer, UV-Curable Inks. High-performance production machine for printing on a variety of materials with UV-curable inks. Ideal for printing on sheet and board materials such as aluminum composite panels, PVC sheets (rigid or foam), acrylic glass, glass, metal, wood, cardboard, and cut-to-size films. Even challenging materials, such as those sensitive to heat, can be printed without issue due to the stepless adjustability of the UV lamps, preventing excessive heating. The integrated, retractable positioning marks allow for precise and easy placement of print media, enabling accurate series production. The printer features precise print control, ensuring very high accuracy for multiple print passes (e.g. 2.5D, relief, or Braille printing). Tedpfx Asyc Nt Djmysa Technical Data: - 3 Ricoh GEN-5 print heads - Print resolution up to 1200x1200 dpi - Ink configuration: CMWK-WW - 2 LED lamps with up to 8 watts drying power - Steplessly adjustable lamp intensity - Print area approx. 2500 x 1200 mm - Maximum material thickness: 100 mm - Automatic material thickness measurement - Manual material thickness adjustment possible - Vacuum system with 4 controllable vacuum zones - Ink system with 1-liter bottles - No chip required for recognition (open system) - Connection: 32A – 380 Volt - Dimensions approx.: 4930 x 2190 x 1320 mm (without monitor arm) - Weight approx. 1490 kg The unit is operational and can be viewed at any time in 45884 Gelsenkirchen. The listed price is ex works Gelsenkirchen plus transport costs. Installation and on-site training can be provided upon request for an additional charge (not included in the price). Year of manufacture 2019 – Completely overhauled in 2025* *All ink-carrying parts such as ink hoses, filters, pumps, etc. replaced. Print heads are used but in perfect working condition (see nozzle check printout). All relevant drive components checked and adjusted. Price: €21,900 without RIP software €23,900 with current Onyx RIP software Onyx Postershop Version 25 SignRacer Edition.

Condition: refurbished (used), Year of construction: 2018, operating hours: 6,590 h, functionality: fully functional, machine/vehicle number: SR2512-100-228, number of ink cartridges: 5, color channels: 5, number of print heads: 3, resolution (max.): 1,200 dpi, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 100 mm, paper width (max.): 2,500 mm, paper height (min.): 1 mm, paper height (max.): 100 mm, total length: 2,100 mm, total width: 4,700 mm, total height: 2,100 mm, space requirement length: 3,000 mm, space requirement width: 6,000 mm, space requirement height: 2,000 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 32 A, input voltage: 380 V, SignRacer UV Digital Printing System - SR2512 Flatbed Digital Printer, UV-curable inks. High-performance production machine for printing on a wide range of materials using UV-curable inks. Ideal for printing on boards and sheet materials such as aluminium composite panels, PVC sheets (rigid or foam), acrylic glass, glass, metal, wood, cardboard, as well as cut-to-size films. Even challenging substrates, such as heat-sensitive materials, can be printed with ease thanks to the stepless adjustment of the UV lamps, preventing excessive heat build-up. Todpfxoyc Nt Rs Amyoa Integrated, retractable registration pins enable precise and effortless positioning of print media, making accurate series production possible. The printer features highly accurate print control, ensuring excellent repeatability when printing multiple passes (e.g., for 2.5D, relief effects or Braille lettering). Technical data: - 3 Ricoh GEN-5 printheads - Print resolution up to 1200 x 1200 dpi - Ink configuration: CMWK-WW - 2 LED lamps with up to 8 watts drying power - Lamp intensity continuously adjustable - Print area approx. 2500 x 1200 mm - Maximum material thickness 100 mm - Automatic material thickness measurement - Manual material thickness adjustment possible - Vacuum table with 4 independently adjustable vacuum zones - Ink system with 1-litre bottles - No chip recognition required (open system) - Power connection: 32A – 380 volts - Dimensions approx.: 4930 x 2190 x 1320 mm (without monitor arm) - Weight approx. 1490 kg The machine is operational and can be inspected at any time in 45884 Gelsenkirchen. The listed price is ex works Gelsenkirchen plus transport costs. Installation and on-site training can be offered for an additional charge (not included in the price). Year of manufacture: 2018 – Refurbished 2025* *All ink-carrying components such as ink tubes, filters, pumps, etc. have been replaced. Printheads are used but in flawless condition (see nozzle test printout). All relevant drive components checked and calibrated. €18,900 excluding RIP software €20,900 including current Onyx RIP software Onyx Postershop Version 25 SignRacer Edition.

Condition: used, Year of construction: 2001, two head two lance Todpfx Amsxtdu Asyja CE RULES width 2600mm H 4000

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000 Year of manufacture: 2010 / Commissioned: 2011 Control: Siemens 840 D Travel ranges: X = 10,000 mm, Y = 1,500 mm Enlarged spindle ram stroke: Z = 1,000 mm Enlarged clearance height: 1,000 mm Clearance width: 1,500 mm Main drive: 36 kW, n = 6,000 rpm, 720 Nm 2-speed gearbox, 1:4 Tedpfjymb Easx Amyoa Taper: SK 50 Machining capacity in C45: - Solid drilling D=120mm - Tapping M55 - Milling 100 cm³/min Gantry design with traversing portal bridge and stationary clamping table. Clamping table equipped with transverse clamping beams at 750 mm intervals; standard plate sections eliminated. Hydraulic clamping device with clamping bridges for axle machining, including hydraulic unit Angle drilling and milling head, n = 4,000 rpm, SK 50 High accuracy and stability thanks to Hirth coupling Automatic tool change into the angle head Measuring probe RWP20.50-M Pendulum operation Safety fence with light curtains, Sick brand Clamping table with transverse clamping beams at 750 mm spacing Tool chain magazine on portal column with 30 stations Machine cooling unit Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, motorized height adjustment Partition wall with viewing window Chip conveyor with hinged belt design Mounting and alignment elements included

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, number of ink cartridges: 6, total length: 1,700 mm, total width: 3,100 mm, total height: 1,300 mm, type of input current: three-phase, overall weight: 760 kg, working width: 1,600 mm, energy consumption: 4 kWh, product height (max.): 100 mm, table length: 1,000 mm, table width: 1,640 mm, Equipment: cooling unit, documentation/manual, Large Format Flatbed LED UV Printer The SIGNRACER 1610 is a reliable and versatile flatbed printer designed for industrial-grade production. Equipped with either Ricoh Gen.6 printheads, the printer offers excellent adhesion on various substrates, making it an ideal choice for printing on both dark and transparent surfaces in a single pass. Its LED UV curing system offers variable power levels and is air-cooled, providing a long lifespan and excellent performance. With its high-quality construction and advanced features, the SIGNRACER 1610 is a top choice for a range of industrial printing applications. It is ideal for producing high-quality graphics on both dark and transparent surfaces with its White and Gloss inks, in addition to CMYK process colors. Its ability to print on rigid and flexible materials such as PVC boards, Aludibond, PS, PP, Acrylat, PET-G, and Glass makes it perfect for printing signs, displays, and exhibition graphics. Tedpfsunw Eqox Amyoa Ricoh's smaller drop print heads are suitable for special applications that require higher precision, such as watch faces and industrial components. Signracer also develops its own waveforms and inks, allowing for even higher print output and top quality at maximum printing speeds without compromise. This ensures a perfect match between our ink formulations and waveforms, especially in grayscale printing. Specifications Printhead - Ricoh Gen.6 Printhead Count - 4 Printbed Size - 1600 mm x 1000 mm Carriage Speed - Ricoh Gen.6: 1.26 m/s Vacuum Table - 2 Honeycomb zones with registration pins Dimensions (H x W x D) - 1300 mm x 3100 mm x 1700 mm Weight - 760 kg Energy Consumption - 4 kW Max. Media Width - 1640 mm Max. Print Width - 1600 mm Media Type - Rigid and flexible (PVC Boards, Aludibond, PS, PP, Acrylat, PET-G, Glass) Media Thickness - Maximum 100 mm Curing System - LED UV with variable power levels LED UV Lamp - 90 mm / 14 Watt/cm2 Color Configuration - CMYK + White + Varnish Ink Consumption - Ricoh Gen.6: 8 ml/m2 Draft (4 passes, 600x900 dpi) 26 m2/h Production (6 passes, 600x900 dpi) 20 m2/h Quality (9 pass, 600x900 dpi) 15 m2/h

Condition: excellent (used), functionality: fully functional, overall weight: 154 kg, input voltage: 220 V, total width: 660 mm, total length: 1,500 mm, total height: 1,310 mm, HP DesignJet XL 3600 MFP - Total meter reading: 23,105 m2 - Includes Calibration Sheet - All-in-One model - Includes PostScript option Very high productivity thanks to fast first print and high print speed. 📐 Ideal for CAD, GIS, and architectural drawings, with sharp lines and accurate colors. 📄 Automatic roll feed with integrated catch tray for prints. 📱 Direct printing from USB, network, email, and mobile devices. 🖥️ 15-inch touchscreen for easy operation. Tjdpfjzpyfisx Amysa 🔒 Comprehensive security, including encrypted storage and network security. 📦 Suitable for large print volumes, making it popular with repro departments and technical drawing offices. This machine has been inspected and thoroughly tested by our own specialized technical service. If you would like any further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: ready for operation (used), Agie Zch. Signal Terminal Blok STB-06 A 621802.8, used, minor signs of wear, 100% functional. Tjdsi D Ty Sepfx Amyoa