Used Sign Boards for sale (19,771)

Condition: good (used), Hazard lights, night markings, flashing lights, day/night markings Iodpofkph Usfx Affetr -Signal lights for: Wind turbines -GF light: RE-LED 864 (Red) -Housing: aqua signal -Price: per piece -Quantity: 2 pieces -Dimensions: 380/356/H290 mm -Total weight: 15 kg

Condition: used, Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens 810 D, total length: 6,500 mm, total width: 3,500 mm, overall weight: 9,000 kg, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis vertical machining center from Unisign, model Univers 4, year of manufacture 2004. The machine is used but in good condition, fully functional, and has been regularly maintained. Special feature: second milling spindle (replacement spindle included). Operating hours: 19,357 Technical Data -Traverse paths: X = 1600 mm / Y = 400 mm / Z = 400 mm -B axis: A axis (360° x 0.001°) 20 rpm -Spindle speed: 0 – 9000 rpm -Control: Siemens Sinumerik 810D -Table size: 1 bridge with 4 sides, L 1800 mm, 4 x 113 mm -Table load capacity: approx. 150 kg -Working feed rate: 5 – 28,000 mm/min -Rapid traverse (X/Y/Z): 28,000 mm/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 44 stations -Tool diameter: approx. 70 mm (up to 200 mm with free adjacent slots) -Max. tool length: approx. 240 mm -Max. tool weight: 5 kg -Max. total weight of tool magazine: approx. 200 kg -Tool change time: approx. 8 sec Machine Requirements & Dimensions -Total power requirement: 14 kW -Machine weight: approx. 9000 kg -Footprint (LxW): approx. 6.5 x 3.5 m Equipment & Accessories -Coolant system (approx. 480 L, internal & external emulsion) -Clefil RBF-E100 20 bar pump unit -Chip conveyor -Rinse gun in machining area -Hydraulic/pneumatic clamping options in machining area -Enclosed work area cover in accordance with safety regulations (UVV) -Röhmheld hydraulic aggregate (max. 500 bar) -Automatic probe RWP20.00 -Various SK40 holders -Technical documentation & floor plan available Maintenance -Regular maintenance performed -Hydraulic and pneumatic hoses partially renewed -LT module replaced in control cabinet The machine is immediately available and ready for operation. If interested or if you have any questions, please get in touch! All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale. Iodpfxjx Iputs Affetr

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand SIEMENS Model SIEMENS 840D Main Drive Number of axis 4 Movement Itsdox D D Drepfx Affer X-Axis Movement 3000 mm Y-Axis Movement 3000 mm Z-Axis Movement 1000 mm Additional Equipment CNC Portal Milling Machine with integrated turning capability, suitable for CNC boring, milling, turning, and angle head machining This 4-axis Unisign UNIPORT 6000 was manufactured in 2007. A universal machining centre, it offers robust construction and precision for diverse machining needs. Consider the opportunity to buy this Unisign UNIPORT 6000 universal machining centre. Contact us for more information. Application Types Milling

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), gearing type: hydrostat, fuel type: gasoline, Year of construction: 1998, Line marking machine: Iodex Ek Tfopfx Affetr + ProSign + Citadine + Self-propelled – hydraulic – forward and reverse + Airless pump + Line spray gun + Hand spray gun + Honda GX160 engine, 5.5 HP + Year of manufacture: 1998 Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine tussen de kolommen: 2550 mm!! 5-assige freeskop Iodpfx Aov Sfkaeffotr koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: as good as new (ex-display), total width: 19 mm, Currently approximately 15 tons available from stock! Steel Strapping SIGNODE PW Apex 0085400 19x0.70 mm Roll width: 60 mm 12 rolls on a disposable pallet Weight: approx. 560 kg 104 kg per 1000 m Price per pallet with 12 rolls. Discounts available for larger quantities. All information is provided without guarantee. Subject to prior sale. Itsdpfx Aopxnmusffsr The purchased item is sold without any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health.

Condition: used, Year of construction: 2001, two head Itjdpfjxtdu Aox Affsr two lance CE RULES width 2600mm H 4000

Condition: good (used), Year of construction: 2005, travel distance X-axis: 3,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, Unisign Uniport 6000 portal milling machine, year of manufacture 2005, Siemens 840 D control, travel range X/Y/Z 3000/3000/1000 mm, C axis for turning operations, table Ø 2500 x 2000 mm, max. turning diameter Ø 3000 x 2500 mm, max. turning height 1000 mm, angle head for lateral machining, Itodpfoxqmduex Affer 2.5° Hirth coupling, spindle speed up to 6,000 rpm, spindle power 36 kW, taper HSK 100, tool changer with 30 positions, 3D measuring probe, chip conveyor, faceplate Ø 2000 mm, max. faceplate load 10,000 kg, machine weight 45,000 kg,

Condition: ready for operation (used), Year of construction: 2008, operating hours: 32,157 h, Control Unit Brand SIEMENS Model 840D Main Drive Spindle motor power 26 kW Movement X-Axis Movement 6000 Y-Axis Movement 800 Z-Axis Movement 600 Itjdpjx D Rvbefx Affjr Additional Equipment Number of Tools: 52 This 5-axis Unisign UNIVERS 6 vertical machining center was manufactured in 2008. It offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this Unisign UNIVERS 6 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), gearing type: hydrostat, fuel type: gasoline, Year of construction: 2004, Line marking machine: + ProSign + Speeflo Powrliner 6900 + Year of manufacture: 2004 + Honda GX 160 engine, 5.5 HP + Airless pump + Hydraulic drive forward / reverse + 2x front paint nozzles + 1x handheld sprayer Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typographical mistakes possible; subject to prior sale! Isdpsx Ekwdofx Affetr

Condition: used, Year of construction: 2008, Signode octobus (wrapping): Strapping Machine – Gerd Mosca KPA-131-32 KS 150 (Year 2006) • Strapping heads: 2 installed + 1 spare head • Maximum pallet size: up to 2400 x 4500 mm (centering device max width 2500 mm) • Maximum pallet height: 2200 mm (machine specs: up to 2900 mm total) • Centering unit and turn cross included • Pallet requirement: The goods must be placed on a pallet before strapping (cannot strap without pallet) • Internal conveyor dimensions (pallet press): 2920 x 2100 mm (rollers only, frame excluded) • Programs: 27 strapping programs created (more can be added) • Controller: Siemens S7-300 PLC Gerd mosca (strapping): Wrapping Machine – Signode (Haloila) Octopus 2300 SFTS TWIN (Year 2008) • Maximum pallet size 1400 x 1400 mm Isdpfx Aoxpgw Esffotr – Machine specifications: 1900 x 1150 mm, 1700 x 1400 mm, 1400 x 1700 mm • Maximum pallet height: 2200 mm used / machine specs up to 4000 mm (from floor) • Pallet requirement: Wrapping possible with or without pallet • Internal conveyor dimensions: 2500 x 5170 mm (rollers only, frame excluded) • Programs: 9 wrapping programs created (more can be added) • Controller: Siemens S7-300 PLC

Condition: used, Year of construction: 2007, BAZ Unisign Type: Uniport 6000, Year of manufacture 2005 and 200. Machining centers with Ø2 and Ø2.5 meters. Uniport 6000/05 as well as 6000/08. The machines can be inspected on site. Isdpow D Sprofx Affetr

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, controller model: 21i MB, table width: 625 mm, table length: 825 mm, overall weight: 9,000 kg, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. Iedjxd Atfepfx Affjtr 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2640.558, type of input current: AC, conveyor belt width: 1,316 mm, total width: 141 mm, total height: 135 mm, total length: 370 mm, overall weight: 4 kg, input voltage: 18 V, control voltage: 18 V, conveyor belt speed: 220 mm/s, power: 0.4 kW (0.54 HP), space requirement height: 135 mm, space requirement length: 370 mm, space requirement width: 141 mm, ambient temperature (max.): 40 °C, Technical specifications: Strap width: 13 – 16 mm Type: battery-powered handheld tool Weight: 3.8 kg Dimensions: 370 x 141 x 135 mm Tensioning speed: up to 220 mm/s Strap tension (soft): 400 – 1,360 N Strap tension (standard): 900 – 2,500 N Cycles per charge: up to 800 Battery charge time to 75% (minimum): 25 – 30 min Iodjwtp Nnopfx Affstr Supplied battery: Bosch Li-Ion 18V, 2.0Ah NOTE: The tool is sold together with compatible strapping tape type TENAX 2040 15.6 x 0.89 GREEN, 24 rolls (shown in the last two images in the listing).

Condition: ready for operation (used), Year of construction: 2008, operating hours: 55,106 h, Control Unit Brand SIEMENS Model 840D Main Drive Spindle motor power 26 kW Tool taper SK 50 Iodpfx Aex D N S Ioffstr Movement X-Axis Movement 5000 Y-Axis Movement 800 Z-Axis Movement 600 Additional Equipment Number of tools: 52 This 5-axis Unisign UNIVERS 6 was manufactured in 2008. Ideal for complex geometries, this vertical machining centre enhances precision in diverse machining tasks. Consider the opportunity to buy this Unisign UNIVERS 6 vertical machining centre. Contact us for more information. Application Types Milling

Year of construction: 1978, condition: used, 1,2 t, Coil OD 1.650 mm Itedpfx Afjtn Diefer 20 - 300 x 0,4 - 3,5 mm

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, number of ink cartridges: 6, total length: 1,700 mm, total width: 3,100 mm, total height: 1,300 mm, type of input current: three-phase, overall weight: 760 kg, working width: 1,600 mm, energy consumption: 4 kWh, product height (max.): 100 mm, table length: 1,000 mm, table width: 1,640 mm, Equipment: cooling unit, documentation/manual, Large Format Flatbed LED UV Printer The SIGNRACER 1610 is a reliable and versatile flatbed printer designed for industrial-grade production. Equipped with either Ricoh Gen.6 printheads, the printer offers excellent adhesion on various substrates, making it an ideal choice for printing on both dark and transparent surfaces in a single pass. Its LED UV curing system offers variable power levels and is air-cooled, providing a long lifespan and excellent performance. With its high-quality construction and advanced features, the SIGNRACER 1610 is a top choice for a range of industrial printing applications. It is ideal for producing high-quality graphics on both dark and transparent surfaces with its White and Gloss inks, in addition to CMYK process colors. Its ability to print on rigid and flexible materials such as PVC boards, Aludibond, PS, PP, Acrylat, PET-G, and Glass makes it perfect for printing signs, displays, and exhibition graphics. Ricoh's smaller drop print heads are suitable for special applications that require higher precision, such as watch faces and industrial components. Signracer also develops its own waveforms and inks, allowing for even higher print output and top quality at maximum printing speeds without compromise. This ensures a perfect match between our ink formulations and waveforms, especially in grayscale printing. Specifications Printhead - Ricoh Gen.6 Printhead Count - 4 Printbed Size - 1600 mm x 1000 mm Carriage Speed - Ricoh Gen.6: 1.26 m/s Vacuum Table - 2 Honeycomb zones with registration pins Dimensions (H x W x D) - 1300 mm x 3100 mm x 1700 mm Weight - 760 kg Energy Consumption - 4 kW Max. Media Width - 1640 mm Max. Print Width - 1600 mm Media Type - Rigid and flexible (PVC Boards, Aludibond, PS, PP, Acrylat, PET-G, Glass) Media Thickness - Maximum 100 mm Curing System - LED UV with variable power levels LED UV Lamp - 90 mm / 14 Watt/cm2 Itodpfx Asunw Eqsffor Color Configuration - CMYK + White + Varnish Ink Consumption - Ricoh Gen.6: 8 ml/m2 Draft (4 passes, 600x900 dpi) 26 m2/h Production (6 passes, 600x900 dpi) 20 m2/h Quality (9 pass, 600x900 dpi) 15 m2/h

Condition: ready for operation (used), Year of construction: 1990, Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible. Itedpfjw U T Ucsx Affjr

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, A used CNC portal milling machine with a C-axis for turning (CNC turning, CNC milling and angle head machining). Boring machine machining! Hirth gearing! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max: turning height: 1,000 mm Machine: Uniport 6000 Boring machine work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max: turning height: 1,000 mm C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then there is the turning attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. Isdpfx Aevvh R Dsffjtr You can swivel this over the Hirth gearing by 2.5° each. All holders (milling, turning, angle head) are clamped using HSK-100. The machine comes with a radio probe from M&H (Hexagon) for measuring and zero point probing.   The machine is in operation and can be inspected on site. A video of the machine is available.

Condition: good (used), functionality: fully functional, Juki Corporation Electro Design GIMO transport module, MB 702 Model: MB702 Year of manufacture: 2016 Electrical data: Rated voltage: 100/240V AC Itsdpfoucd Utjx Affer Frequency: 50-60Hz

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,357 h, General Data Measurements width 3500 Measurements depth 6500 mm Machine weight 9000 kg Control Unit Brand SIEMENS Model Sinumerik 810D Main Drive Number of axis 4 Movement X-Axis Rapid Traverse 28000 mm/min Y-Axis Rapid Traverse 28000 mm/min Z-Axis Rapid Traverse 28000 mm/min X-Axis Movement 1600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Table Table load 150 kg Tools Slots in storage 44 Max weight 5 kg Max tool diameter 70 mm Max tool length 240 mm Type of tool holder DIN 69871-SK40 Media Chip conveyor Yes Iodpfx Asx D H Sxjffotr Additional Equipment Measuring Probe RWP20.00 Enclosed Work Area Enclosure according to UW Some SK40 Chucks Hydraulic/Pneumatic Clamping Option in the Machining Area Römheld 8400-185 Hydraulic Unit, Max. Pressure 500 bar Flushing Gun in the Machining Area Replacement Milling Spindle Available This 4-axis Unisign Univers 4 was manufactured in 2004, featuring X-travel of 1600mm, Y-travel and Z-travel of 400mm each, and a spindle speed up to 9000 rpm. It includes a chain tool magazine with 44 positions and a tool holder type DIN 69871-SK40. The machine weighs 9000 kg and requires a space of 6.5 x 3.5m. If you are looking to get high-quality milling capabilities consider the Unisign Univers 4 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1996, x-travel 3000 mm y-travel 1500 mm z-travel 400 mm Serial number 7872 Itedpfxsud Ixlj Affsr chip conveyor MAYFRAN 40.6GS-HR/SP20 control SIEMENS SINUMERIK 820 table surface area 3000 X 1500 mm table load 1000 kg / m2 Tool changer 52 stck. weight of the machine ca. 15000 kg UNISIGN - Uniport 4 - Machining centre - Vertical Technical details will be added shortly 40820 operating hours including chip conveyor from the manufacturer MAYFRAN with TYPE 40.6GS-HR/SP20 Total weight: 15,000 kg

Condition: used, SIGNODE AUTOMATIC STRAPPING STATION, model M400 Itodpfewxxz Rjx Affsr The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. SIGNODE automatic Strapping: Machine Model M400/PA/TSM for vertical strapping Pneumatic strapping floating head: for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness 450 kg. jumbo coil dispenser: with electrical unwinding Switchboard: Included

Year of construction: 2018, condition: ready for operation (used), Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation. Iedpfxoihp Ipj Affetr

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, A used CNC portal milling machine with carousel turning unit / C-axis for turning Hirth gearing TRAVEL PATHS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Itodsvvh T Sjpfx Affjr Then the rotary attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this by 2.5° each time over the Hirth gearing. All holders (milling, turning, angle head) are clamped via HSK-100. A radio measuring probe from M&H (Hexagon) for measuring and probing the zero point is included with the machine. The machine is in operation and can be viewed on site. A video of the machine is available.