Used Showroom Machine for sale (65,038)

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm Gksdpfxsygx Hns Agrsd A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: used, Year of construction: 2016, operating hours: 6,700 h, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 420 mm, controller manufacturer: Siemens, total length: 3,900 mm, total width: 2,550 mm, overall weight: 10,000 kg, coolant supply: 70 bar, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, Selling a used, universal machining center, Spinner U-1520, manufactured in 2016, from a training center with very few operating hours! Travel distances: X: 1520 Y: 520 Z: 420 C: 360 degrees B: -5 degrees (-90 degrees) +115 degrees Equipment: Siemens 840D control with ShopMill Chip conveyor Blum tool measurement system Blum measuring probe Calibration mandrel IKZ 70 bar with paper band filter 12000 rpm spindle, SK40 Tool changer Swinging operation, 3-axis - 5-axis machining Compressed air for the spindle Enclosed work area Clamping surface 3-axis table: 920 x 540 mm Tilting round table: 650 mm diameter Accessories: Various tool holders, SK40 Machine feet 3D measuring probe Gedoz Hcahepfx Agrjkd Tool measurement system Machine is available immediately! We will handle the loading of the machine! Transport can be organized upon request.

Condition: good (used), Year of construction: 2015, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, Godo Ai Sg Sopfx Agrjkd 18kW Spindle Motor, 30 station side arm ATC, DIN40 spindle taper, 10,000rpm spindle, Hurco Winmax 5 control, through spindle coolant.

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Gkjdpfxsx A Tcuo Agrod Total number of drilling spindles: 12 Total number of tool changer positions: 14

Condition: new, Year of construction: 2026, functionality: fully functional, • Table size: 1370 x 300 mm • Table T-slot size: T14 x 3 x 80 mm • Max. table load: 300 kg • X-axis travel: 1000 mm • Y-axis travel: 360 mm • Z-axis travel: 400 mm • Spindle taper: ISO40 • Spindle speed: 45 – 1660 rpm (11 steps) • Rapid traverse: 1000 mm/min • Motor power: 3.0 kW / 400 V • Weight: 1900 kg • Dimensions: 1830 x 1760 x 1700 mm Technical Features: • Precise, wide, ground and hardened rectangular guideways • Universal milling head (HURON type), 360° swiveling • Automatic feed and rapid traverse on X and Y axes • Adjustable overarm Gkedps Ai I Dvofx Agrsd • Gearbox • Automatic central lubrication system • Hardened and ground gears Accessories and Equipment: • Swiveling universal milling head • Rapid traverse on all axes • SINO 3-axis digital readout (DRO) system • Machine vice 200 mm • Coolant system • LED work light • CE conformity • Machine documentation The machine is new and immediately available.

Condition: excellent (used), Thickness planer and jointer, 350 mm width Router Blade diameter: 300 mm Miter saw with 3000 mm carriage Spindle molder, spindle diameter 35 mm Gkodpfx Aoziuvisgred Drilling machine 400 V

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Gkjdpjwlbxlofx Agrod Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 min. module: 0,5 x-travel: 100 mm y-travel: 160 mm z-travel: 100 mm A-Axis travel: -40 ... +40 ° speeds of tool: 300 - 4000 U/min Geds Ai Tr Hspfx Agrskd workpiece turning speeds: U/min connected load: 48 kVA dimensions of the machine ca.: 5,3 x 4,2 x 3,4 m weight of the machine ca.: 6,5 t

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1270 x 508 x 508mm, 20 station tool changer, Godpfe Ai Sdzjx Agrskd Table 1321 x 457mm, maximum table load 1800 kgs, 15kW Spindle Motor, Spindle Taper DIN40, spindle speed 40 - 8000rpm, Hurco WINMAX 5 Control, Low Volt Light, Coolant, Swarf Auger

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, The VR 88 automatic vertical strapping machine is ideally suited for strapping pallets. It is suitable for installation in both powered and non-powered conveyor systems. The lower lance allows the strap to be threaded through the pallet. During the strap tightening process, the strapping head moves horizontally to compensate for tolerances and ensure uniform strap tension and high stability. Gkjdpfx Agj Ai Uirerjd The system control program allows for the execution of one or more strapping cycles, depending on the customer's specific packaging requirements. The machine has been completely refurbished by us and is fully functional. Technical data: Supply voltage: 230 V / 400 V / 3-phase / 50 Hz Power consumption: 3 kW Strap types: PP or PET Strap width: 12 mm Strap thickness: 0.6 – 1.0 mm Strap tension: up to 200 kg (optionally up to 500 kg) Closure type: Hot wedge welding Closure time: approx. 1 – 3 s, depending on strap type Strap feed speed: 2.5 – 5.5 m/s Strap retraction speed: 2.5 – 5.5 m/s Strap tensioning speed: approx. 0.25 m/s Strap reel core: 405 mm Strap frame: 1,200 × 1,600 mm

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, Automatic pallet strapping system KZD-311 with strapping head model KSR The system is designed for strapping the following package dimensions: Product to be strapped: empty cans stacked on pallets Pallet dimensions Length min. 1,250 mm max. 1,450 mm Width min. 1,120 mm max. 1,150 mm Height 145 mm clear height 80 mm for passing the strap guide tongue Top deck height 22 mm Overall dimensions including pallet Length min. 1,250 mm max. 1,450 mm Width min. 1,120 mm max. 1,150 mm Height min. 1,000 mm max. 3,000 mm Weight min. approx. 150 kg / pallet max. approx. 350 kg / pallet Top deck support: wooden frame, length x width = pallet dimensions Interlayers made of solid cardboard or hardboard: Length 1,250 mm – 1,450 mm Width 1,120 mm – 1,150 mm Thickness each 1 mm System dimensions Height of the strapping system from floor level to column top 4,600 mm Clearance height to top mounting plate 3,360 mm Overall width 5,330 mm Clearance width 1,860 mm Length of the pressure plate 663 mm Pressing force adjustable 0 – 1,000 – 2,000 – 3,000 N via selector switch Drive of the pressure plate via geared brake motor Pressure plate speed 135 mm/s Technical data Strapping head model KSR Strap tension continuously adjustable 200 – 2,000 N Strap feed speed 4.6 m/s Closure principle: long friction welding closure Head arrangement: lateral Travel distance to the package max. 500 mm Godpfs Ai Ui Dsx Agrskd End switch actuation: head on the package Electrical data Operating voltage 3/N/PE, 400 V, 50 Hz Control voltage 24 V, DC Total connected load 4.5 kVA Performance Number of pallets per hour approx. 15 (3.5 minutes per pallet) Number of straps 2 x transverse / 2 x longitudinal 3 x transverse / 2 x longitudinal Paint finish Paint finish of the system: RAL 5010 – Gentian Blue Paint finish of the control cabinet: RAL 7035 – Light Grey Paint finish of the protective grid: RAL 1023 – Traffic Yellow Strapping material Quality of the strapping band: PET / PP, set to PET, type KE 1200 A – GR – MF Width of the strapping band: 12.0 mm x 0.5-1.0 mm (band thickness can be adjusted) Main components • System base frame with welded support column and guide rails for the lifting carriage • Lifting carriage with eccentric rollers • Rack • Pinion • pole-switchable geared brake motor • complete plastic strap guide • 1 holding-down pressure plate • Pressing force 0 N – 1,000 N – 2,000 N – 3,000 N • 2 flap openers • proximity light barrier for height pallet detection • electrically driven traversing carriage for the strapping head, stroke = 500 mm • electrically driven strap guide tongue • automatic strapping head model KSR with strap tension compensation • strap unwinder, model KA-400-E • freely programmable Siemens S7 controller with CPU 314 / OP 7 • cable length from system to control panel = 5.0 m • lifting carriage always returns to the home position after strapping • operation via switches, buttons and illuminated push buttons (OP 7 only for text display) • error messages via plain text display Siemens OP 7 • strap tension – digital display via plain text display Siemens OP 7 • potentiometer for strap tension control in the control panel cover • strap retraction via frequency inverter • protective grid, complete • panel labeling: German • wiring diagram: German • documentation 2 copies, German

Condition: used, total height: 2,050 mm, total width: 2,700 mm, total length: 2,500 mm, Year of manufacture: 2004 Gkodpfx Age Aiq Ecersd Colour: Beige Empty weight: 2.000 kg - Year: 2004 - CE marking present: Yes - Serial number: 200403001 - Drive system: Conventional - Horizontal/vertical: Horizontal - Power [kW]: 7.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1300 - Y-axis travel [mm]: 320 - Z-axis travel [mm]: 450 - B-axis rotation [°]: 350 - Table length [mm]: 1750 - Table width [mm]: 460 - Tool holder: ISO40 - Main spindle power [kW]: 7.5 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 2050 - Options: Digital readout - └ Type of digital readout: Fagor - Transport dimensions: 2500mm x 2700mm x 2050mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Falzeinbrenn- und Abpressmaschine - Book press and joint-setting machine Zechini CIMATIC Year 2000 - Serial-No. 124/00 Buch Format max. Buchhöhe 48cm x Buchbreite 35cm x Buchblockstärke 9cm Book Size max. height 48cm x width 35cm x thickness 9cm Leistung max 150 in St./h / Output 150 pcs/h Gkedpfx Ae Aikf Ijgrod Pressluftanschluss 6 bar / Air pressure supply 6 bar Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Wire Stitching Machine AGRAFIX BX Gkodpj Aikghefx Agrsd 1-head wire stitcher for block- and saddle stapling. Year 1992 - Serial-No. 190121 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Zusammentragmaschine / Collating Machine TMF N14 14 Stationen Zusammentragmaschine A3 - 7 Stationen Zusammentragmaschine A2 14 Stations Collating Machine Size A3 - 7 Stations Collating Machine Size A2 Mit einem angebundenen Rüttler zig/zag / Delivery Jogger with an online zig/zag unit Panel Operation and Controls, Stau / Jamming Doppelbogen- und Fehlbogenkontrolle / double-sheet and no-sheet control Pre-set counter - Full receiving Tray Handnbücher / Manuals Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Gode Aikhqjpfx Agrokd On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Jacob White TL-X3 Vertical cartoning machine Godps Aih Ttjfx Agrskd Stainless, semi automatic vertical cartoning machine, HMI touch screen controls, variable speed, with nordson Problue glue system, 3Ph

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Round stock milling machine, manufacturer Stellmacher, type RST310/3-3 SE, for producing cylindrical milled wood with diameters from 150 to 310 mm, with an electric drive of 45 kW for the milling head. The feed rate is adjustable from 1 to 12. Two roller conveyors on wheels are used for feeding and removing the wood. Gkodpfx Agey Ta Ibered This machine, with its large diameter range, is a particularly rare find as a used machine.

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm z-travel 450 mm Gkodpfx Agj Aiiqtorsd quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Condition: used, Year of construction: 2000, x-travel 1200 mm y-travel 620 mm Gksdpe Aiiq Eefx Agrjd z-travel 520 mm control TNC410 HH table-size 1550 x 600 mm feeds 1-30000 mm/min rapid traverse 45 m/min spindle turning speed - stepless 40- 8000 U/min spindle taper ISO 40 tool change unit 30 Pos. total power requirement 20 KVA weight of the machine ca. 9 t dimensions of the machine ca. 4,2 x 2,3 x 2,7 m This machine does have a long table for long parts or with a partition to work by shuttle machining. Control: Heidenhain TNC 410. We supply 3 pieces additional tables along with the machine.

Condition: used, Year of construction: 2013, controller manufacturer: Sonstige, controller model: Andronic 3060, _____ Description: Year of manuf. : 2013 Control : Sonstige Andronic 3060 Speed : 42000 rpm Movement X/Y/Z : 550/400/400 mm Tool holder : HSK-E40 Spindle: Technology:Motorspindle Speed:42.000 rpm Power:17kW Taper:HSK-E40 NC-Swivelroundtable: Technology:Integrated 4./5.-Axis B-Axis:-/+ 110° C-Axis:360° Workpiecedimensions (max.):ø400 x 380 mm Workpieceweigth (max.):250 kg Palletclampingsystem:Parotec Partool clamping chuck Gkjdj Ail Nlopfx Agred In general: Toolmagazine:32 stations Rapid travers in X/Y/Z:30 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Y/Z Workpiecemeasurement:Touch probe, Renishaw OMP400 Toolmeasurement:Laser, BLUM Extraction:Graphiteextraction, Keller L-Cut Coolingmanagement I:Minimum lubrication Coolingmanagement II:Blow air through spindle Setup operations:Electronic handwheel Further Equipment:Spindlechiller Further Accessory:Misc. Pallets and electrode holders

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm Gkedpfx Agew T Tlrered All technical details are given without obligation and subject to errors or omissions.

Condition: used, Year of construction: 1980, drill diameter 2,4-13 mm Godpfsztfzwex Agrskd drilling length ca 165 mm lip angle 90-140 °

Condition: used, Year of construction: 1969, weight 2 t Gedpfewk Ravsx Agrjkd stroke 500 mm ja ja

Condition: excellent (used), Year of construction: 1988, taper MK 5 spindle diameter 60 mm feed ja m/min Gsdpfx Agjzmixmorskd weight of the machine ca. 1,1 t

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 Godpfs Ain Iwjx Agrjkd - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.