Keyseating Machine

STUHLMANN POL 50

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Technical data: - Groove width: 3 to 36 mm Fgedpfxewu Suvo Ad Ijd - Max. groove length: 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min - Max. pulling force: 1.5 t - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown

Condition: used, Year of construction: 1966, Max. pulling force: 5 t, max. stroke: 850 mm, max. cutting speed: 12 m/min, max. return speed: 25 m/min, clamping area: 410 x 575 mm, groove width: 3 - 90 mm, drilling diameter: 13 - 500 mm, workpiece weight: 6000 kg, depth of the machine base below floor level: 1,400 mm. Fjdpfx Aecm Elnod Ijgd

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: M-900iA/260L R-30iA, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. Reliability as Standard 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: M-900iA/260L Controller: R-30iA Payload: 260 kg Reach: 3.1 m General purpose: Heavy payload, long arm Robot mass: 1800 kg Delivery time: To be agreed Fgodpsp T Umqofx Ad Isd IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily business is the reliable delivery of refurbished A-brand robots: ABB, KUKA, FANUC, and YASKAWA. Established in 2002. We ship worldwide!

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided. Fgedpfx Aeiryyaod Iod

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Fgodpfx Adex Ii Hve Ied Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Fedsxyllvspfx Ad Isgd Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t Fodpfxev T Nqae Ad Ijgd The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, working width: 1,700 mm, welding power (max.): 600 kVA, wire diameter (max.): 6 mm, type of input current: three-phase, MG950 Mesh Width (Cross Wire Length) for lower feed, single-row: 200 – 900 mm for upper feed, single-row: 200 – 1700 mm for upper feed, double-row (usable width): max. 1530 mm Mesh Length: max. 3200 mm min. 350* mm Distance between the outermost longitudinal wires: max. 1600 mm Longitudinal wire pitch: min. 20 mm Cross wire pitch: min. 10 mm steplessly programmable Clear opening longitudinal wire: min. 15 mm Fgodpjym An Asfx Ad Iod Clear opening cross wire: min. 8 mm Longitudinal wire diameter: 2.0 – 6.0 mm Cross wire diameter: for lower feed: 1.5 – 4.0 mm for upper feed: 2.0 – 6.0 mm Longitudinal wire overhang: max. 300 mm, min. 10 mm Cross wire overhang: max. 300 mm, min. 5 mm Number of individual welding groups ESG: 12 Number of portal welding groups PSG18: 12 Max. number of longitudinal wires: 12

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Table load: 2000 Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Fedoxclfzspfx Ad Isgd Height: 1400mm Weight: 1800kg

Condition: used, Year of construction: 2008, Material feed in any length (maximum stroke 610 mm) Cutting diameter: round 510 mm, square 500 x 500 mm Cutting speed adjustable via control: 25 - 235 m/min chip conveyor Fedpjvxqtajfx Ad Isgd Operating manuals, wiring diagrams and spare parts lists available Only about 5,000 cutting hours Further technical data see photo or on request Machine weight: approx. 3 t Very good condition