Used Shop Cabinet for sale (5,294)

Condition: used, machine/vehicle number: WSM0000000201xxxx, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 21944 Specifications: - Eu-approved until 30.04.2026 - 3 axles - Lift on 1 axle - Tires (see pictures) - 33 pallet cabinet - Zepro Lift element, 2000 kg - Remote control - Ready for delivery Kledpfx Aox Am S Aeh Nel Technical approved: Yes EU-approved until: 30.04.2026 Own weight: 8280 Total Weight: 45000 Payload: 36720 Width: 260 Length: 1385 Model: Skapsemi m/ Løftelem

Condition: used, machine/vehicle number: YF2T36SFGKKN3xxxx, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 18721 Specifications: Kjdpsvg Agusfx Ah Nsll 2019 model EU-approved until 24.03.2026 3 axles Full side opening Axle distance: 132/132 cm Payload: 33,020 kg Internal dimensions: Height: 3.03 m Width: 2.50 m Length: 13.40 m External dimensions: Length: 13.80 m Height: 4.30 m Width: 2.60 m Description:2019 Ekeri box trailer with full side opening.Delivery by agreement. Technical approved: Yes EU-approved until: 24.03.2026 Own weight: 8980 Total Weight: 42000 Payload: 33020 Width: 260 Length: 1380 Inside lenght: 1340 Model: 3 akslet skapsemi m/ full sideåpning

Condition: used, machine/vehicle number: YS2R6X2000205xxxx, mileage: 669,167 km, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 21538 Specifications: 2011 model 669,167 km 480 hp 6x2 Automatic transmission Euro 5 Tires (see pictures) Containers Lift Heated mirrors Air conditioning/ac Light Radio Ready for delivery     Description: We have a 2011 Scania R480 Box truck w/ 2t lift for sale. The car has recently been EU approved and is in regular weekly use. A lift has recently been installed at the rear of the car, which increases its functionality. There is a minor coolant leak from the engine. Therefore, the coolant level should be checked daily before starting. According to the owner, the leak is minimal. Otherwise, the car works as it should. Ready for delivery Km: 669167 HK: 480 Technical approved: Yes Klodpfxjxm Sy Ho Ah Nel EU-approved until: 24.09.2026 Own weight: 10120 Euro: 5 Model: R480 Skapbil m/ 2t lift Gearbox: Automatic

Year of construction: 2024, condition: used, New: Yes Empty weight: 35 kg Kodpfxsyaf Sqs Ah Noll Serial number: 9305082 Transport dimensions (LxWxH): 0,51x0,2x0,85 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A. Completely wired 2 units available

Condition: used, mileage: 365,000 km, power: 132 kW (179.47 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, airbag, central locking, electric window regulation, power mirror, traction control, Year of manufacture: 2016 Front axle: Steering Kjdpfxeyaahto Ah Njll Rear axle: Double wheels 3.0 L Engine 2 x Refrigerator

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, complete control cabinet without teach panel and connection cables Klodpjx U Tcbefx Ah Nel fully functional, can be inspected under power on site

Condition: excellent (used), Year of construction: 2022, Type: 7920.5020 Serial number: 751004716 Year of construction: 2022 Content: 1300 litres Refrigerant: R290 Temperature range: -18 °C to -22 °C Power: 230VAC, 50Hz, 780W Kjdpfxox Sw Tfs Ah Nell Dimensions: 830 x 1480 x 2050 mm Weight: 201 kg Stainless steel freezer with double door and lock

Year of construction: 2012, condition: ready for operation (used), General Data Measurements width 1850 mm Measurements depth 1300 mm Measurements height 2500 mm Machine weight 1540 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 250 mm Kljdpfx Aox D Inbsh Nol Table Table load 400 kg Additional Equipment Max. Electrode Weight: 80 kg This 3-axis AgieCharmilles CABINET FORM20 die-sinking EDM machine was manufactured in 2012. Ideal for precision mold making and tooling applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles CABINET FORM20 machine we have for sale. Contact us for more information. Application Types EDM

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. Kledexa H Ewjpfx Ah Nel If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS Kedpswzmcbofx Ah Noll During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. Klodpfxowzl Hxo Ah Nel • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Equipment: freezer, lighting, ISA PROFESSIONAL ice cream display case ice counter ice cream parlor ice cream refrigerated display case 18 types of ice Different advertising in front - the model remains the same Ice cream display case with air-cooled indoor unit for the presentation of 18 ice cream bowls 5 liters. Weight: 450kg Width / length ~ 167,3 cm Depth ~ 106,9 cm Height ~ 130,8 cm Plastic / metal bracket accessories Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. Used machine - very good condition - checked and fully functional. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Kljdsv Iy Rtepfx Ah Nel Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: good (used), Kuka KR 15/2 robot with control cabinet Kedox Uq Egspfx Ah Njll

Year of construction: 2007, condition: like new (used), functionality: fully functional, Special Opportunity! Only ONE unit left! We are able to offer you this top-quality Thermo / Heraeus B 6200 incubator, in mint condition, from the inventory of the State of Thuringia. The B 6200 is one of the most reliable units on the market and has become indispensable in laboratories worldwide. Known for its high precision, it is also regarded among professionals as especially robust and durable. This device was purchased new by the State of Thuringia in 2007 and has since only been operated annually for calibration purposes. Its condition is immaculate both visually and technically – see photos. A particular highlight is the enhanced specification, far surpassing the standard model: this B 6200 features additional safety switches, a timer, and microprocessor-controlled temperature regulation. The price refers to one incubator with the described equipment and an internal shelf as shown. Technical Data: Thermo / Heraeus B 6200 incubator Kodpfx Ahewcznbe Njll Manufacturer: Thermo / Heraeus, Made in Germany Internal volume: 196 liters. Temperature range up to 70°C. Fresh air and exhaust ports. External dimensions (W x H x D): 895 x 816 x 715 mm Internal dimensions (W x H x D): 554 x 644 x 550 mm Weight: approx. 90 kg 230 V, 50 Hz, 2.6 A, 0.6 kW Features: Digital temperature controller with microprocessor monitoring, over- and under-temperature protection. Timer. Stainless steel inserts. Applications: Microbiological incubation in pharmaceutical, medical, and microbiological laboratories; hygiene testing in pharmaceutical, food, and cosmetics industries; long-term storage tests; and more. This offer is directed exclusively at commercial customers. An invoice with VAT shown will be provided. Private buyers may purchase the unit "on behalf of a customer." Direct commercial sale to private individuals is expressly ruled out. The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to damage claims due to gross negligence or intentional misconduct by the seller, or any injury to life, limb, or health. Shipping will be arranged within three working days of payment receipt via freight carrier. Alternatively, you may collect the device from our premises by appointment during business hours. Total shipping weight including accessories and pallet is approx. 110 kg. If you have any questions, please contact us directly using the details provided.

Condition: used, Control cabinet, floor-standing cable rack with glass door Manufacturer: Schneider Electric Condition: used, very good Size: Klsdpfoxcxw Dex Ah Nel 59.5 x 60.5 x 191 cm More pieces in stock.

Condition: used, Year of construction: 2011, Manufacturer : Packo Inov NV Type: Cryofreezer / Batch freezer Year of manufacture : 2011   Total volume : 950 L Dimensions : 150 x 120 x 230 cm Supply voltage 3x400V + N – 50Hz Minimum temperature set point: – 120°C Weight : 600 Kg Materials: 304 L stainless steel Full technical file: available in digital version Refrigerant : Liquid nitrogen   Previous use: 0.5 or 1L bottles containing Biological active ingredient. 0.5L bottle : Klodpfxjx R A Apj Ah Nel o Dimensions: 72 x 72 x 180 mm (WxDxH) o Maximum capacity: 32 bottles 1.0L bottle : o Dimensions: 90 x 90 x 220 mm (WxDxH) o Maximum capacity: 32 bottles  

Condition: excellent (used), 612 USED shop oven WP Brilant for 5 trays 60x40. EXTERNAL DIMENSIONS (in cm): - W: 93 - L: 130 - H: 212. EQUIPMENT: - hood - fogging - base with shelves TECHNICAL DATA: - power: 7.5 kW - steaming: 1.5 kW The device is available to verify in our warehouse (36-068 Bachórz, Poland). Kljdom Uyimopfx Ah Nsl Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN.

Year of construction: 2000, condition: used, Fire extinguisher, fire hose box, fire hose box, fire extinguisher cabinet, fire extinguisher cabinet Kledpfx Asttc S Uoh Nsl -Manufacturer: Gesa, fire extinguisher cabinet with fire alarm and wall hydrant with hose reel -Hose reel: pressure hose DN 25 length 30 m -Number: 3x fire extinguisher cabinet available -Price per piece -Dimensions: 1090/260/H920mm -Weight: 88 kg/piece

Condition: used, Fire extinguisher, fire hose box, fire hose box, fire extinguisher cabinet, fire extinguisher cabinet -Fire extinguisher cabinet: wall hydrant with hose reel -Fire hose: with pipe nozzle -Number: 2x fire extinguisher cabinet available -Price per piece Kodpjttc Tgofx Ah Nsll -Dimensions: 1175/250/H850 mm -Weight: 55 kg/piece

Condition: used, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet. Drawer cabinet, sturdy design -7 drawers: layout/height see photos, shelf can be opened at the top Kedpfx Ahorcnmas Njll -lockable: without key -Quantity: 2x cabinet available -Price per piece -Dimensions: WTH 600/610/H950 mm -Weight: 104 kg/pc.

Condition: used, Site power distributor, site power meter, connection cabinet, crane distributor, distributor cabinet, power distributor, crane connection cabinet -Distribution box: made of VA -Dimensions: 410 x 400 mm -Depth: 165 mm Kodpfxjfgyf Ne Ah Noll -Price: per piece -Number: 2 pieces -Weight: 10.5 kg/piece

Condition: good (used), Year of construction: 2012, Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger spindle cooler -Manufacturer: Harbor, heat exchanger spindle cooler from CNC machining center Santenberg GTC S 2 -Type: HPW-10AR Kodpoi Sdf Ujfx Ah Njll -Voltage: 110V 50/60Hz -Dimensions: 250/75/H580 mm -Weight: 5.7 kg

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet Kjdpfx Aewrrl Neh Nell -Tool cabinet. Drawer cabinet, sturdy design -6 drawers: layout/height see photos -lockable: without key -Dimensions: 630/750/H930 mm -Weight: 88 kg

Condition: good (used), Year of construction: 1996, Fuel gauge, oil pump, oil dispensing system, oil station, fuel pump, tank data recording, tank system display, oil cabinet, fresh oil pump -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 -Volume flow: 1 to 10 l/min -Engine: Hanning 0.55 kW -Pressure vessel: volume 2.8 liters Kljdpfx Ahjw A Nddj Nsl -Individual components: see photos -Number: 2x oil cabinet available -Price: per piece -Dimensions: 500/480/H250 mm -Weight: 19 kg/piece

Condition: good (used), Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger, wall-mounted cooling unit, control cabinet cooler Kedpfx Ahjprb Dge Noll -Manufacturer: bader, control cabinet - cooling unit -Type: W 25/8 A -Voltage: 230V -Power consumption: 0.120 kW -Number: 1x cooling device available -Price: per piece -Dimensions: 300/80/H750 mm -Weight: 11.0 kg/piece