Used Shelving Cantilever For Wood for sale (18,170)

Condition: good (used), Year of construction: 1996, Vecoplan shredder Type: VAZ 90/55N Motor power: 7.5 kW Dedpfx Afexlcxws Ijcn Hopper: 900 x 550 mm Video available on request

Condition: excellent (used), Year of construction: 1998, operating hours: 3,075 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 2,150 kg, Very well-maintained machine in top condition with low operating hours Electronic soft start, idle shutdown Mawera RZM 200 Motor power: 18.5 kW Rotor width: approx. 800 mm Rotor speed: 135 rpm Dsdpfx Ajwv Enfjf Iocn Hydraulic pusher with PLC control Chipping capacity approx.: 500-850 kg/h Screen: 20 mm Extraction outlet left or right: 210 mm Original paint Weight: 2,050 kg The machine is installed under a joinery line and has only processed clean wood Last maintenance: 12/2024 Loading possible Comparable to Weima, Untha, Reinbold, Zeno,

Condition: used, Year of construction: 1995, Technical details: Dcedpfju Szfujx Af Ijn punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open *

Condition: refurbished (used), Year of construction: 2021, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: K62197, power: 18.5 kW (25.15 HP), overall weight: 1,700 kg, Schuko - ZM100 K shredder, overhauled, for sale due to circumstances. Includes discharge auger, rotor and knives are new. The rotor was defective and was replaced by Schuko. We couldn’t wait for the repair and purchased a new machine. The unit runs perfectly. 18 kW. Screen size 12/15 mm. Hopper size 1000*1000 mm. Shredder dimensions: 1050*1500*1710 mm. Sale without warranty. Shipping available. Dcodpfx Asxlcdmef Ion

Condition: good (used), Technical Specifications for the Shelf Rack: Shelving system: Dexion Djdpoxghbyjfx Af Iscn Type: HI280 Technical Data for Assembly: Number of rack rows: 1 pc. Rack length: approx. 1,375 mm Number of bays per rack row: 1 pc. at 1,275 mm Number of shelves plus base level: 15 pcs. Included in delivery: 02x uprights, used Material color: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm incl. side panels The uprights are pre-assembled Height: 2,500 mm Depth: 610 mm 15x shelf panels, used Material color: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pc.: approx. 4.37 kg Max. load per shelf with evenly distributed load: 100 kg 15x shelf beams, used Total length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 2 pcs. Weight / pc.: approx. 0.84 kg Material color: Sendzimir galvanized 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: Sendzimir galvanized 01x load sign with specifications for bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Should transport or shipping be required, additional costs will apply, which can be requested from us depending on the place of delivery and scope of delivery.

Condition: ready for operation (used), Perimeter tenoning machine BALESTRINI model TO 2 working fields, round/longitudinal tenons – independent processing, adjustment of tenon thickness and width, Dsdpfx Aewxrmtof Iscn adjustable table angle setting.

Condition: good (used), Veneer press OTT 300 K-DSP 30 tons pressing force Year of manufacture: 1993 Dcodpfoxk Urasx Af Ien Max. format: 480 cm length, 150 cm width Press height: 88 cm. Includes mobile scissor lift table on rails, dimensions LxW approx. 141x103.5 cm, extendable up to 300 cm, height-adjustable outfeed roller conveyor dimensions LxW approx. 480x180 cm, 2-section, 2-way pneumatic roller conveyor, total dimensions LxWxH 500x103x92 cm. Required footprint for the entire unit is approx. 600x570 cm.

Condition: used, Year of construction: 2010, operating hours: 2,813 h, functionality: fully functional, Drive power: 18.5 kW Rotor speed: 98 rpm Rotor length: 700 mm Number of cutting tools: 19 pcs Perforated screen: 25 mm Feed opening: 700 x 1065 mm Dcjdsxk Um Rspfx Af Isn Weight approx.: 1800 kg Extraction port: 200 mm - Second control panel - Emergency stop on the machine - New hydraulic hoses - New hydraulic and transmission oil - New oil filter - New Siemens PLC - Cutting unit rotated – new blade

Condition: used, Year of construction: 1984, power: 55 kW (74.78 HP), Hacker Lindner The geared motors were renewed a few years ago Dcodpfoxga I Ssx Af Ijn with metal detector 55 kW

Condition: used, Double-sided cantilever rack for bar stock (custom-built) Height: 1.9 meters Rack length: 4.3 meters Frame spacing: 2000 mm Dcjdexf Ut Hepfx Af Ien Arm depths: 600 / 500 / 450 and 400 mm Load capacity per arm: approx. 200 kg Load capacity per level (per bay with 3 uprights): approx. 600 kg Total load capacity with 3 uprights: approx. 4800 kg Base width: 1000 mm - 3 uprights = 2 bays = Ideal for 6 meter bar stock - Uprights made of 100 x 50 x 9 mm U-profile - Support arms made of 100 x 50 x 7 mm U-profile - 8 arms per upright (total 24 welded arms) - 3 double-sided uprights with base - Bolted upright connectors made of rectangular tube - Diagonal bracing is missing Assembled dimensions (L x W x H): 4400 x 1450 x 1900 mm Transport dimensions (L x W x H): 2100 x 1500 x 500 mm Total weight: 350 kg

Condition: used, Technical specifications for the wide-span racking: Racking system: Stow Type: Midirack Specifications for the installation: Number of rack rows: 01 unit Rack length: 2,810 mm Number of bays per rack row: 01 unit Number of levels incl. ground level: 05 units Scope of delivery includes: 02x End frames, used Material finish: Sendzimir galvanized Upright profile dim.: 55 x 45 x 1.5 mm incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled 2,000 mm high 700 mm deep 10x Beams, used Material color: yellow Z-profile: 74 x 30 mm Connector: 2 hook Clear span: 2,700 mm 20x Safety pins, used Material finish: Sendzimir galvanized For securing the beams against accidental dislodging 05x Chipboard panels, used Dodpfev Hzfvjx Af Iecn Thickness: 22 mm Width: approx. 2,680 mm Depth: approx. 690 mm Surface: possibly coated (possibly two-part) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping is required beyond collection, additional costs will apply. These can be requested from us depending on the delivery location and scope.

Condition: excellent (used), Locatelli Oriental Matik 1350 lathe component grinder Working length: 1350 mm Two grinding units Dsdpfx Ajxf Thvjf Iocn Six stations for grinding components Minimum grinding length: 220 mm Maximum grinding length: 1350 mm Maximum grinding diameter: 120 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Filling system consisting of the following components: 1. Cross Trough: Trough width: 2.8 m Trough height (lower side): only 0.8 m Trough depth: 1.2 m Dcodpfjvrcfuox Af Ien incl. protective grid on top incl. 3 kW gear motor left and right versions available Optional: chassis, forklift adaptation, .... 2. Inclined Screw Conveyor: Length: 2 m (other lengths available upon request) Variable inclination incl. 3 kW gear motor 3. Feed Screw: Length: 2 m (other lengths available) Open on the end face All screw conveyors have a diameter of 200 mm and are continuously welded onto a steel tube! (Larger screw diameters also available upon request!) Without wiring and control system We are also happy to offer you custom-made designs! Prices excl. VAT.

Year of construction: 2005, condition: ready for operation (used), Additional Equipment Slotting Spindle: Ø 400 mm Cross-Cutting Saw Beveling Unit Circulating Conveyor Belt with Transfer Unit Longitudinal Processing with Profile Spindles Horizontal Spindle // Fitting Spindle // Grooving Spindle Mullion Supports Lateral Clamping Profile Spindles: Ø 50 mm, Max. Ø 200 mm // Profile Spindles: Ø 50 mm, Max. Ø 200 mm Pitched Window Dcsdpfxjxf N Irj Af Isn This WEINIG UNICONTROL 12 was manufactured in 2005. It is a comprehensive window manufacturing machine featuring a slotting spindle Ø 400 mm, cross-cutting saw, beveling unit, and a circulating conveyor belt with transfer unit. It supports longitudinal processing and includes a Siemens Panel PC for control. Ideal for producing pitched windows and double-part packages. For more information about this machine, please reach out to us. Application Types Other Woodworking Machinery

Condition: excellent (used), Year of construction: 2017, Waste Wood Shredder Manufacturer: Weima Model: WL 4 Year of manufacture: 2017 Operating hours: approx. 2,684 h Hopper opening: 800 x 600 mm Hopper volume: 0.6 m³ Power: 18.5 kW Dedpfjxix A Tex Af Iocn Screen diameter: 20 mm Number of knives: 14 Feed: Hydraulic Rotor diameter: 252 mm Speed: 90 rpm Weight: 1,300 kg

Condition: used, overall weight: 18,000 kg, empty load weight: 4,390 kg, maximum load weight: 13,610 kg, axle configuration: 2 axles, first registration: 11/2018, tire size: 275/70 22,5, color: black, Year of construction: 2018, operating hours: 171,224 h, mileage: 171,224 km, tire condition: 80 %, front tire size: 275/70 22,5, rear tire size: 275/70 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69815 Doll, Tandem * Year of manufacture: 2018 * ABS (Anti-lock Braking System) * Duomatic air coupling * 15-pin electrical connector * Gross vehicle weight: 18,000 kg * Unladen weight: 4,390 kg * Payload: 13,610 kg * Permitted gross vehicle weight: 18,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 80%|80% -- 80%|80% – Tire size: 275/70 R22.5 * Tire condition, 2nd axle: 70%|70% -- 70%|70% – Tire size: 275/70 R22.5 * Tire sizes: 275/70 R22.5 * Manufacturer: BEFA Belziger Fahrzeugbau GmbH * Wabco Smartboard * 50 mm towing eye * High coupling * Short timber trailer, 4 bolster with ExTe stanchions * 3x spray protection * Steel frame cover * Wabco Smartboard, 171,000 km Disclaimer: Subject to prior sale, changes, and errors. More photos and videos are available on our website. Our comprehensive services include: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling of all (export) documents * Ordering export/customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and cargo securing Dcsdpfx Aowwqngsf Ion * TÜV inspection, registration service * Transfer of commercial vehicles Please contact our trained staff—we are happy to advise you.

Condition: good (used), Technical specifications for the shelving rack: Rack system: SSI Schäfer Type: R 3000 Technical specifications for installation: Number of rack rows: 01 unit Rack length: 1,480 mm Number of bays per row: 01 unit Scope of delivery includes: 02x pallet rack uprights, used Finish: Sendzimir galvanized Frame type: P95 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted truss design) 2,100 mm high 800 mm deep 05x shelf panels, used Finish: Sendzimir galvanized Dimensions: 1,295 x 790 x 40 mm Weight | each: approx. 12.82 kg 01x pallet pull-out unit, used Finish: blue Total depth: approx. 810 mm Total width: approx. 1,295 mm Height: approx. 265 mm 3-sided roll-off edge: approx. 20 mm Ball bearing-mounted Extension: 100% = 740 mm Weight | each: approx. 100 kg 10x light-duty beams, used Designation: BL 3 Total length: 1,310 mm Profile dimensions: L 42 x 44 mm Finish: Sendzimir galvanized Dedsw A Raaopfx Af Iocn 20x safety pins, used Finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply, which can be quoted separately depending on the delivery location and scope.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), Untha LR 700 single-shaft chipper, new Drive power: 18.5 kW Hydraulic drive power: 1.1 kW Rotor diameter: 300 mm Rotor speed: 98 rpm Number of indexable inserts: 19 Filling opening: 700 x 1065 mm Extraction nozzle diameter: 200 mm Required extraction speed: 28 m/s Recommended pipe cross-section: 200 mm Weight: approx. 1800 kg Workplace-specific Sound pressure level LPA 1 m: 82 dB(A) Diameter of perforated screen: 15 - 40 mm Throughput*: up to 6 srm/h (depending on material properties and perforated screen diameter) Applications Dcjdpfx Afou Id Ugs Isn - Hard and soft wood - OSB - Particleboard - MDF - Veneers - Cross-cut wood - Reliable and economical cutting system - Unique indexable insert geometry - Low-wear perforated screen - Powerful and low-wear swivel slide - Energy-efficient and trouble-free drive concept

Condition: excellent (used), functionality: fully functional, Catalogue number 7673 TECHNICAL DATA - top feed hopper inlet: 800x1050mm - outlet for shredded wood: Ø 150mm - rotor working width: 800mm Djdpjwrrhdjfx Af Iecn - main motor: 18.5kW - number of knives: 19 pcs - knife dimension: 30x30mm - screen: 24mm - pressure drawer - electric autoreverse - dimensions (L/W/H): 2000x1600x1800mm - weight: approx. 1800kg ADVANTAGES – German manufacture – autoreverse – pressure drawer – very good condition – used shredder Net price: 57,900 PLN Net price: 13,620 EUR (depending on a rate of 4.25 EUR) (Prices may change with significant fluctuations)

Year of construction: 2003, condition: ready for operation (used), General Data Measurements width 2300 mm Measurements depth 6400 mm Measurements height 2300 mm Machine weight 3600 kg Main Drive Number of axis 3 Movement X-Axis Movement 4310 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 1675 mm Y-Axis Rapid Traverse 50 m/min Z-Axis Movement 185 mm Z-Axis Rapid Traverse 20 m/min Dcodpfoxfwx Eex Af Ion This 3-axis Weeke BHC 280.3 CNC Wood Machining Centre was manufactured in 2003. It features a robust 9 KW milling cutter with a C-axis, an 8-position tool holder, and a combination unit for versatile drilling, milling, and sawing. The machine supports a maximum workpiece thickness of 70 mm and operates with impressive X, Y, and Z travel speeds. Ideal for high-quality woodworking, consider the opportunity to buy this Weeke BHC 280.3 CNC Wood Machining Centre. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: used, functionality: fully functional, Edgebanding unit End trimming unit Trimming unit Dsdpfx Ajxfuh Dof Ijcn 2nd trimming unit Sanding unit

Condition: good (used), Technical specifications for wide-span shelving: Racking system: Stow Type: Midirack Installation details: Number of shelf rows: 01 pc. Shelf length: 1,910 mm Number of bays per row: 01 pc. Scope of delivery: 02x shelf uprights, used Material finish: Sendzimir galvanized Upright profile dimensions: 55 x 45 x 1.5 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled Height: 2,000 mm Depth: 700 mm 10x shelf beams, used Material finish: white Z-profile: 77 x 32 mm Weight | per piece: approx. 3.95 kg Connector: 2 HK (hooks) Clear span: 1,800 mm 20x locking pins, used Material finish: Sendzimir galvanized For securing the beams against accidental lifting 05x chipboard panels, used Thickness: 22 mm Width: approx. 1,780 mm Depth: approx. 690 mm Djdpfx Afsv Iakgj Ijcn Surface: possibly coated (possibly in two parts) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this will incur additional costs, which can be requested from us depending on the delivery location and scope.

Year of construction: 2022, condition: ready for operation (used), Main Drive Spindle motor power 12 kW Tool taper Partly with HSK Number of axis 5 Movement X-Axis Movement 4455 mm Y-Axis Movement 2595 mm Z-Axis Movement 495 mm Additional Equipment Automatic central lubrication: Yes Dodpfx Asxfw Dhjf Iecn Control cabinet with new main computer: Yes // Control terminal with keyboard and mouse: Yes Handheld terminal for remote control: Yes Vacuum system: 1060 square meters (oversized) Safety device with light barrier and bumper: Yes Drilling head: 12 vertical drilling spindles Controlled central extraction connection: Yes Machine control: "F4Operate", "F4Tollbox", "F4Create" 3D nesting software: F4Nest Powerful machine PC: Yes This 5-axis FELDER Format 4 Profit H150 22.32 T was manufactured in 2022. It features a 5-axis main spindle with 12 kW power, a 17-fold linear changer, and an 18-position plate changer. The machine includes a comprehensive control system with F4Operate, F4Toolbox, F4Create, and 3D nesting software F4Nest. It also boasts a complete compressed air system and automatic central lubrication. The FELDER FORMAT4 Profit H150 22.32 T machine we have for sale. Contact us for further details regarding this CNC Wood Machining Centre. Application Types CNC Wood Machining

Condition: good (used), Technical data for the shelving system: Racking system: Dexion Type: HI280 Technical data for installation: Number of shelving rows: 01 pc Shelf length: 2,710 mm Number of bays per row: 02 pcs Number of shelves: 06 pcs Scope of delivery includes: 02x Upright frames, used Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm Including mesh side panels Mesh size: 50 x 50 mm Uprights are pre-assembled 2,500 mm high 500 mm deep 06x Wire mesh shelves, used Material finish: hot-dip galvanized Dcjdpjw Duh Rofx Af Ion Total depth: approx. 482 mm (bearing bar orientation) Total width: approx. 1,270 mm (cross bar orientation) Bearing bar dimensions: 20 | 1.80 mm Bearing area: approx. 20 mm Frame height: approx. 20 mm Mesh size: 68 x 35 mm Weight / pc.: approx. 6.72 kg 04x Shims, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material finish: Sendzimir galvanized 12x Shelf beams, used Total length: 1,280 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs Weight / pc.: approx. 0.84 kg Material finish: Sendzimir galvanized 01x Cross brace, used Material finish: Sendzimir galvanized 01x Load sign With information on bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope.

Condition: good (used), Technical data for the shelving unit: Shelving system: Dexion Type: HI280 Installation data: Number of shelving rows: 01 pcs. Shelving length: 2,710 mm Number of bays per shelving row: 02 pcs. Number of shelves: 06 pcs. Scope of delivery includes: 03x Upright frames, used Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustable pitch: 25 mm Including mesh side panels Mesh size: 50 x 50 mm The frames are pre-assembled 2,500 mm high 500 mm deep 12x Wire mesh shelves, used Material finish: hot-dip galvanized Total depth: approx. 482 mm (load bar direction) Total width: approx. 1,270 mm (cross bar direction) Load bar dimensions: 20|1.80 mm Support: approx. 20 mm Frame height: approx. 20 mm Mesh size: 68 x 35 mm Weight per unit: approx. 6.72 kg 06x Levelling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material finish: Sendzimir galvanized 24x Shelf beams, used Total length: 1,280 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight per unit: approx. 0.84 kg Material finish: Sendzimir galvanized 01x Cross brace, used Material finish: Sendzimir galvanized 01x Load sign With indication of bay and shelf load, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Dodew Dp Sdepfx Af Iecn Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Transport or shipping of this item beyond collection is subject to additional costs, which can be individually requested from us depending on the place of delivery and scope of delivery.