Used Shaving Mills for sale (9,633)

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw Gedpszixq Refx Aa Eeud

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw Guedpjzixd Dsfx Aa Esd

Condition: used, power: 7.5 kW (10.20 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Gedpezixdwofx Aa Esud Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Gjdpfxezixdke Aa Eoud Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Godpfxezixdde Aa Eoud Drive: 75 kW

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables Godezixc Topfx Aa Eoud With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Gujdpfxjzixcts Aa Esd Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Guodpfszixcmjx Aa Ejd Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Guodpfx Asw Enw Isa Ejd

Year of construction: 2020, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 12000 mm TRANSVERSAL TRAVEL: 1600 mm VERTICAL TRAVEL: 3600 mm RAPID FEEDS L-T-V: 30 m/min TABLE SIZE: 13000 x 2500 x 300 mm SPINDLE: 450 - 5000 rpm; 34 kW; 830 Nm; ISO 50 HEAD: UNIVERSAL AUTOMATIC A/B AXIS ; MILLESIMAL POSITIONING TOOL MAGAZINE: CHAIN-TYPE ; 100 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 40 Bar Godpfxozbnr As Aa Eeud WEIGHT: 87480 Kg ACCESSORIES: SWARF CONVEYOR ; LASER TOOL SETTER ; PAPER FILTER ; TOUCH PROBE ; PORTABLE HANDWHEEL NOTE: ROTARY TABLE 1500X1500, 1,5 rpm, MAX ADMITTED LOAD 15.000 Kg; HEAD LOADING/UNLOADING DOUBLE CRADLE; MOBILE WORKING PLATFORM; PERIMETER FENCES; STATIC RTCP OF ROTATING TABLES; STATIC RTCP IN THE SPACE ; AUTOCAL; VIBRATION DETECTION PROBE; COOLING TANK 1500L; GREEN MODE FUNCTION

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted Gusdpfjh S Uhfjx Aa Ejd The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: ready for operation (used), Year of construction: 1984, Horizontal Boring Machine Wotan C 105 D Spindle diameter: 105 mm Gjdpfjytf Ifox Aa Eoud X-axis travel: 2000 mm Y-axis travel: 1500 mm Z-axis travel: 1400 mm W-axis travel: 1300 mm Rotary table: 1300x1150 mm

Year of construction: 1989, condition: ready for operation (used), CNC Milling Machine Bed Type Mecof MG 88 G Table 6000x1060 mm X-6000 mm Y- 2000 mm Godpfeh H Nd Aox Aa Eeud Z-1000 mm Control Siemens 828 DSL

Condition: used, Year of construction: 2017, machine/vehicle number: O3pl, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 230 V, input frequency: 60 Hz, type of input current: AC, rip fence adjustment: manual, actuation type: pneumatic, rotational speed (max.): 12,000 rpm, rotational speed (min.): 12,000 rpm, table width: 330 mm, table length: 2,400 mm, total length: 2,600 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 540 kg, We are offering this used PEMAC 03PL 3-head copying milling machine, manufactured in 2017, for sale. Year of manufacture: 2017 Model: 03PL Serial number: 03PL1704 Power: 0.75 x 3 kW Voltage: 230 V Guodpfszlar Usx Aa Ejd Phase: 1 Frequency: 50/60 Hz Current: 7 A Weight: 540 kg Operating pressure: 6-7 bar Speed: 12,000 RPM If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. * 1.5-meter Lns Quick Load bar loader. * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gear stages. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitor. Guedpfxjzladws Aa Eed * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar loader. * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: reconditioned (used), Year of construction: 1980, functionality: fully functional, For sale: a drilling and milling machine from Alzmetall. Type: Plus 3 DG. Gusdozk U Dpjpfx Aa Esd Inspection and test run possible at any time. Forklift available for loading.

Condition: good (used), Table milling machine Martin T 25. Gedpsy Srtmefx Aa Ejud

Condition: excellent (used), Year of construction: 2006, operating hours: 11,773 h, functionality: fully functional, turning length: 650 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, spindle bore: 51 mm, mount diameter: 30 mm, overall weight: 3,000 kg, CNC lathe DMG NEF400 Year of manufacture: 2006 Gjdpjzk T Nkefx Aa Eoud Control system: Siemens 840D Turning diameter: 350 mm Turning length: 650 mm Spindle bore: 51 mm 8-position tool turret Coolant system Chip conveyor Machine documentation Includes chuck and a set of hardened jaws VDI 30 Maximum spindle speed: 4000 rpm Sale is only to commercial businesses, without guarantee or warranty. You will receive an invoice with the currently applicable VAT. The machine can be loaded.

Condition: excellent (used), Year of construction: 2003, Tool holder, vertical + horizontal SK 40 Table size, L x W 710 x 315 mm Speed range, vertical spindle 63 – 2500 rpm Speed range, horizontal spindle 45 – 1800 rpm Travel ranges: X-axis, longitudinal adjustment, automatic / manual 400 / 420 mm Guedoziutzopfx Aa Eod Y-axis, transverse adjustment, automatic / manual 220 / 228 mm + cross slide 375 mm Z-axis, vertical adjustment, automatic / manual 350 / 380 mm Adjustment of the quill, vertical, manual 80 mm Machine dimensions, approx. 1550 x 1620 x 1850 mm Machine weight, approx. 1300 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1991, Universal CNC milling machine Specifications: CNC: HEIDENHAIN TNC415 Table longitudinal travel X-axis: 3,200 mm Transversal travel Y-axis: 1,200 mm Vertical travel Z-axis: 1,250 mm Table dimensions: 5,000 x 1,000 mm Table load capacity: 15,000 kg Rapid traverse X/Y/Z: 12,000 mm/min Spindle taper: ISO 50 Gusdewvhk Nopfx Aa Eod Spindle power: 22 kW Spindle speed: 2 to 2,000 rpm Total connected load: 46 kVA Machine weight: 25T Machine dimensions: 7,600 x 3,900 x 3,200 mm Equipped with: Manual universal head

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning length: 920 mm, turning diameter: 400 mm, spindle speed (max.): 12,000 rpm, spindle bore: 65 mm, travel distance X-axis: 920 mm, rapid traverse Z-axis: 80 m/min, controller manufacturer: FANUC, controller model: 18iB, fuel: electricity, number of slots in tool magazine: 40, Equipment: chip conveyor, Mori Seiki Mod. MT 1500 SX 9-axis milling and turning machining center, manufactured in 2006, with Fanuc Series 18iB (MSX-501) control, maximum length between chucks of 920mm, maximum diameter of 400mm, bore of 65mm, spindle speeds of 4000 and 6000 rpm for chucks and 12,000 rpm for milling. 12-position turret with motorized tools, Y-axis, B-axis +/- 120, C-axis 0.001, ATC 40 tools and chip extractor. In excellent working order and can be seen working in Portugal. Gusdpfeh Elp Eox Aa Eed

Condition: used, Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 480 mm, controller manufacturer: siemens, controller model: 840 DSL, rotational speed (max.): 18,000 rpm, Equipment: chip conveyor, 6 axis milling & turning center yom 2015 with control Siemens 840 DSL in perfect conditions Gjdpfeh Elngjx Aa Eoud

Condition: used, Year of construction: 1972, Milling machine used Make:Kunzmann Model: UF6N year of construction: 1972 Technical data: Table longitudinal travel automatic: 440 mm Table longitudinal travel by hand: 450 mm Transverse table travel 200 mm Table vertical travel horizontal/ vertical 465/500 mm Table size 860x240 mm Table swivels 45° on both sides Distance table/spindle 430 mm Spindle holder ISA 30 Gusdpfxeudb N De Aa Ejd Quill stroke 60 mm Tiltability of the spindle head +/- 90 18 spindle speeds horizontal 32-1342 rpm 18 spindle speeds vertical 72-2888 rpm 6 automatic feeds lengthwise 13.12-164 mm/min 6 automatic cross feeds 26.24-328 mm/min. Spindle drive 1.8/2.6 kW with inclinable vertical milling head/clamping vice/ Counter holder/collet chuck with collets Weight approx. 850 kg Dimensions approx. 1400x1900x1800 mm

Condition: used, Year of construction: 2018, Bed milling machine, second-hand Make: Austen Model AX 607 Year of construction: 2018 Control unit Basis HH 5-axis HSC bed-type milling machine for machining of long parts, such as beams. Was used for aluminum profiles in window construction and can also be used for light steel machining. steel. Spindle rotates and swivels. Machine moves on linear guides and has direct HH measuring systems. Technical data: X-travel 7000 mm Y-travel 600 mm Z-travel 600 mm Spindle speeds infinitely variable 20-20,000 rpm Spindle motor 11 kW Feed range X-direction 0-90 m/min. Feed range Y-direction 0-50 m/min. Feed range Z-direction 0-40 m/min. Tool changing device 15 Pos. Guodju Rfh Topfx Aa Ejd Spindle holder 63 HSK- Total power requirement 50 kVA Machine weight 12 to. Space requirement 9x2x2.7 m

Condition: used, Stehle milling machine from company liquidation, as shown in the pictures, fully functional. Gedpfx Aajy Nzmqo Ejud