Used Shaft Seal for sale (9,041)

Condition: refurbished (used), Year of construction: 2018, operating hours: 4,865 h, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F Year of manufacture: 2018 Operating hours: 4,865 Engine: Mercedes MTU, 490 HP 42 teeth AdBlue Crawler chassis Remote control Overband magnet Weight: 30,000 kg Itjdpfx Asw Uc Edjffsr Machine is overhauled and immediately available.

Condition: new, Year of construction: 2021, operating hours: 4 h, functionality: fully functional, machine/vehicle number: ZSS8501604002, overall weight: 4,290 kg, rotor diameter: 387 mm, number of blades: 40, rotor length: 850 mm, rotor width: 457 mm, power: 40.75 kW (55.40 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, rotational speed (min.): 74 rpm, year of last overhaul: 2025, sieve perforation: 60 mm, warranty duration: 6 months, input voltage: 400 V, Single-rotor shredder ZERMA ZSS 850-E 37 kW Hopper opening (mm): 1340 x 840 mm Usable cutting chamber: 690 x 730 mm Rotor diameter x width (mm): Ø 387 x 850 mm Rotor speed: 80 rpm Rotor model: E SEW oil-bath gearbox: Included Number and size of knives: 40 / 34x34x22 mm Knife holders with bolts: Included Number of counter-knives: 1 row of 3 IE3 motor power: 37 kW Screen perforations: > 40mm (to be specified) Hydraulic screen opening: Included Discharge height: 560 mm Connected electrical power: 400 V +/- 5% / 50 Hz Hydraulic pusher power: 3.6 kW Hydraulic pusher with 2 speeds: Included Adherent front plate (ram): Included Air/Oil heat exchanger mounted on hydraulic tank Overall length: 2085 mm - Overall width: 1940 mm - Height: 2435 mm Approximate weight (kg): 4400 kg Control cabinet with SIEMENS PLC and settings menus such as: Recipes, Maintenance, Alarms, etc. Isdpfx Aoxtp Dioffetr Cable length to control cabinet: 5 meters See technical datasheet and/or attached diagram for more details.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, film width: 600 mm, product height (max.): 100 mm, product width (max.): 200 mm, product length (max.): 250 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum film width: 600 mm Maximum product width: 200 mm Maximum product height: 100 mm Maximum product length: 250 mm Output: Max. 100 bags/min Itsdpfx Ajxtd Eneffjr Infeed section: Approx. 2.30 m MACHINE DETAILS Required floor space: 4.80 x 1.30 x 1.50 m

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Serial - 1013. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Isdpfxexd Ubno Affjtr Note 🗒️ No printer.

Condition: like new (used), functionality: fully functional, Tool shaft for multi-saw PAUL K34G total length 850mm Isdpsqwg Swjfx Affetr diameter 100mm

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced Itsdpfoxrtt Eex Affer The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: new, Year of construction: 2025, Arjes IMPAKTOR 250 e-EVO II (Electric) Isdpfx Aet Urq Ueffotr Stationary, fully electric, Twin Shaft Shredder Year: 2025 Hours: NEW 1x Set of shafts (choice available, various types depending on application*) 1x Set of breaking bars or breaker basket for concrete, wood, or cable 1x quick-change cassette, for fast shaft change 1x remote control Discharge belt and overband magnet available on request Includes frequency converter. Guarantees an extremely energy-efficient shredding process. Electric Motor – 160kW Gearbox: Bonfiglioli Shredding unit: Length (mm) 3,300 Width (mm) 2,300 Height (mm) 3,200 Control unit Length (mm) 2,600 Width (mm) 1,600 Height (mm) 2,700 Weight (kg) approx. 15,000 kg Shredding Unit Hopper volume (m³) 2.25 Shaft length (mm) 1,500 Rotation speed (rpm) 11–35 Throughput performance: average values without guarantee! The actual values depend on the equipment of the shredder, the shaft configuration, the position of the counter rakes and the optimal material feed. Construction waste ⌀ 80–100 t/h Concrete / Asphalt ⌀ 60–80 t/h Waste wood ⌀ 10 t/h Biomass ⌀ 20 t/h Waste & Plastics ⌀ 10–15 t/h * You can choose between these shafts: - Star shafts 9x4 or 9x6 (Household waste, waste wood, plastic, tires, e-scrap) - Concrete shafts (Concrete, stone, construction waste, asphalt, e-scrap) - Paddle shafts (Wood, waste wood, green waste) - Metal shafts (Home appliances, e-scrap, aluminum (up to 3mm))

Condition: good (used), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 390, total length: 11,000 mm, total width: 3,000 mm, total height: 4,200 mm, overall weight: 35,000 kg, hopper volume: 5 l, rotor diameter: 860 mm, rotational speed (max.): 45 rpm, power: 404.52 kW (549.99 HP), Equipment: rotational speed infinitely variable, Arjes Titan 900 Demo machine Year of manufacture: 2025 Hours: 380 Equipped with paddle rotors and/or star rotors Itjdpfx Afjxraigofer Also standard equipped with: - Magnet - Reversible fan - Remote control

Condition: used, Type ID 900 Ijdpfoxlpt Usx Affstr Especially suitable for pasta twin shaft with paddles all stainless steel 2 motor: 2 x 4kW safety lid dimensions (l x w x h) : ± 2.550 x 1.000 x 1.300 mm

Condition: ready for operation (used), Weiler Commodor lathe with leadscrew and feed shaft for sale. Manufacturer: Weiler Type: Commodor Condition: used, good, still in production Scope of delivery: - Multifix B tool holder - Three-jaw chuck Itodpfx Afjxladwjfsr

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,800 kg, rotor diameter: 368 mm, number of blades: 82, rotor length: 1,500 mm, power: 45 kW (61.18 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 22 mm, input voltage: 415 V, extraction nozzle diameter: 250 mm, Just had the main shaft rebalanced, main bearings and housings replaced, gearbox end needed some work doing, gearbox checked and oil changed, all drive belts good, all in had just over £7k spent. Previously had the shredding screen replaced using Hardox with smaller holes cut for finer shred, has front mounted conveyor feeding through a magnetic separator as pictured, dust extractor and of course main control panel. Iodpfx Aexp Nm Noffjtr All was working as it should be and then it was turned off, about 4 months ago, so needs to go back to work for someone. Looking for offers over £8K Shredder located in Carlisle.

Year of construction: 1984, condition: excellent (used), • Year 1984 • 2x55kW main engines • Max saw blade diameter 300 mm • Max cutting height 200 mm • Track width 350 mm • Shaft length 430 mm Iodpfx Aolrxfqjffstr • Shaft diameter 60 mm • Inverter feed

Condition: excellent (used), Year of construction: 2025, operating hours: 500 h, Eggersmann “Teuton Z 50” Mobile Single-Shaft Shredder Year of manufacture: 2025 Operating hours: 500–1000 Extended warranty available Engine: Diesel, 6-cylinder Output HP/kW: 500/373 Shredding shaft length x diameter Ø: 3,000 mm x 1,050 mm Rotor speed (rpm): 20–40 Bolted tools Tool-free cutting gap adjustment in six steps Extra-large feed area, 5 m wide Rear discharge conveyor Reversing rotor Operating position: Length (mm): 15,864 Width (mm): 2,540 Loading edge (mm): 3,000 Discharge height (mm): 5,000 Transport dimensions Length (mm): 8,976 Width (mm): 2,540 Height (mm): 3,652 Weight (kg): 25,000 VARIOUS OPTIONS AVAILABLE ON REQUEST Screen basket systems: Strip and honeycomb screen baskets in various versions Rotor tools: Multigrip – Unigrip – Twincut – Rootgrip Itjdpfxoxqxbxo Affjr Overbelt magnet: Extra-strong neodymium version, hydraulically height-adjustable, material discharge on both sides possible Ecospray moisture system and much more…

Condition: used, inlet cross section: 2500 x 1700 mm Drive: 160 kW rotor flight circle: 670 mm Discharge of contaminants: hydraulically pre-stressed and openable flaps for discharge of contaminants rotor execution: 14 pcs. positive cutting plates 120x120x55 mm on tool holders counter knife: with cutting gap adjustment Feeding device: hydraulic hopper: 1.700 mm high, with revolving pipe line tube machine weight: approx. 24.000 kg Itjdpfx Afobq Su Nofjr

Condition: used, Year of construction: 1995, Granulator / Knife Mill Manufacturer: CMB (France) Model: MS 610 NC Hjda Asxg Thrjza Spju Main motor: 90 kW Rotor length: 1000 mm Rotor diameter: 600 mm Rotor knives: 5 x 2 Stator knives: 2 x 4 + blower Itsdpfx Afjxg Th Ssfor + big-bag station with cyclone + water cooling The machine was dismantled from the customer's facility and is stored in our warehouse.

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cutting length: 3300 mm Iodpfx Afjxg Hansfetr Cutting width: 140 mm Two adjustable cutting angles Maximum saw blade diameter: 330 mm Pneumatic material clamps 3 operating modes

Year of construction: 1996, condition: good (used), Shredding system, twin-shaft shredder, 2-shaft shredder, shredder, chipper, cutting mill, twin-shaft crusher, rotor mill -Shredder system: equipped with 24 cutting blades -Engine power: 7.5 kW Ijdpfsvbylwox Affotr -Speed: 28 rpm -Dimensions cutting blade: 250 x 19 mm -Filling nozzle 500 x 470 mm -Dimensions 650/1760/H470 mm -Weight 864 kg

Condition: used, Operational mixer with the following dimensions: - mixing trough length: 260 cm Itsdpfsxpi Tpex Affor - trough height: 125 cm - feed opening: 50 x 50 - feed opening: 30 x 30

Condition: used, functionality: fully functional, rotor diameter: 194 mm, number of blades: 23, type of input current: three-phase, rotational speed (max.): 975 rpm, rotational speed (min.): 975 rpm, rotor flight circle: 610 mm, working width: 500 mm, funnel diameter: 740 mm, sieve perforation: 25 mm, Wood Chipper / Shredder NAZZARENO K700 Isdpfxexnxr Es Affetr Industrial machine designed for shredding wooden elements, carpentry waste, battens, and wood blocks. Manufactured by Costruzioni Nazzareno (Italy) – robust, industrial build offering high reliability.

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Type ZTLL 1400 x 1600 Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Main drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kW Rotor flight circle 380 mm Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Screen perforation 40 mm Weight approx. 5400 kg Scope of delivery: Itodpfeu Thabsx Affsr Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), - new main shaft for chipper canter type Linck V 25 - quantity one pair - perfect condition Isdpfx Aexnm T Deffjtr

Year of construction: 2014, condition: excellent (used), Gainsborough Vertical Form & Seal Bagging Machine Continuous VVF Bagging Machine Complete with Markem-Inage SmartDate X40 Coder In Excellent Condition Itedpfx Afouct Ivsfjr Has had very little use

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 95 mm / 16 teeth -Tooth width: mm -Shaft: Ø 60 mm -Dimensions: see photos -Number: 14x gear shaft available -Price: per piece -Dimensions total: Ø 95 x 243 mm Ijdpfx Afsxf Dqbofotr -Weight: 6.4 kg/piece

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 81 mm / 25 teeth / Module 3 -Tooth width: mm -Shaft: Ø 60 mm / inner Ø 38 mm Itsdexf A Nispfx Affjr -Dimensions: see photos -Number: 7x gear shaft available -Price: per piece -Dimensions total: Ø 81 x 175 mm -Weight: 3.1 kg/piece

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 136 mm / 37 teeth -Tooth width: mm Isdpfsxf A Eqsx Affotr -Shaft holder: inner Ø 72 mm -Bolt circle: Ø 100 mm M8 -Dimensions: see photos -Number: 6x gear shaft available -Price: per piece -Dimensions total: Ø 136 x 42 mm -Weight: 5.2 kg/piece