Used Shaft Seal for sale (9,349)

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 81 mm / 25 teeth / Module 3 -Tooth width: mm Bsdexf A Nispfx Acyedi -Shaft: Ø 60 mm / inner Ø 38 mm -Dimensions: see photos -Number: 7x gear shaft available -Price: per piece -Dimensions total: Ø 81 x 175 mm -Weight: 3.1 kg/piece

Condition: excellent (used), Year of construction: 2022, operating hours: 1,530 h, functionality: fully functional, power: 129 kW (175.39 HP), For sale: Arjes Impaktor 250 EVO Year of manufacture: 10/2022 Operating hours: 1530 Equipped with paddle shaft for wood, plastic, commercial waste, etc. Bdedpfsw Nyt Ijx Acyei A concrete shaft is also included. The machine is fully operational and can be inspected during operation.

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 24,000 kg, rotor diameter: 620 mm, number of blades: 30, total length: 6,300 mm, total height: 2,430 mm, total width: 4,700 mm, rotor width: 2,491 mm, power: 200 kW (271.92 HP), type of input current: three-phase, rotational speed (min.): 150 rpm, filling opening width: 2,495 mm, filling opening length: 3,190 mm, input voltage: 380 V, Vecoplan VAZ 300/250 UNF This machine is still in operation and will be available on October 20th. Bjdpfx Acsxlm Trjysdi For more information, please contact us.

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Type ZTLL 1400 x 1600 Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Main drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kW Bdodpeu Thabsfx Acysi Rotor flight circle 380 mm Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Screen perforation 40 mm Weight approx. 5400 kg Scope of delivery: Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, functionality: fully functional, overall weight: 2,000 kg, filling opening length: 600 mm, filling opening width: 700 mm, type of input current: three-phase, Weima ZM 30 S Shredder Motor power: 2 x 18.5 kW! Bsdpfx Asxlk T Aecyodi Chamber dimensions approx. 600/700 mm. Screen. Weight approx. 2000 kg. Additional second set of knives included. Price on request. More photos and a working video available upon request. Testing can be arranged. For more information, please call.

Year of construction: 1999, condition: used, functionality: fully functional, machine/vehicle number: xxx, Shank slotting machine for attaching a cutting tip to screws. The machine is in first-class condition and can be used immediately. Bdedpju Rblhsfx Acyji

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft Bjdpfx Acsxf A Eqoyedi -Gear: Diameter Ø 136 mm / 37 teeth -Tooth width: mm -Shaft holder: inner Ø 72 mm -Bolt circle: Ø 100 mm M8 -Dimensions: see photos -Number: 6x gear shaft available -Price: per piece -Dimensions total: Ø 136 x 42 mm -Weight: 5.2 kg/piece

Condition: new, Cardan shaft balancing machine BVI-03-74 Bdedpspbv Tfjfx Acyei Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: ready for operation (used), Year of construction: 2010, Technical Specifications Specification Detail Motor Power 2 × 15 kW (Total 30 kW) Cutting Chamber (L × W) 1,074 mm × 524 mm Distance Between Shafts 192 mm Rotor / Shaft Type Twin-shaft, hexagonal (85 mm A/F), counter-rotating Bdsdjxlcvcspfx Acyoi Knife Diameter 260 mm Knife Thickness 15.5 mm Overall Dimensions (L × W × H) 2,770 mm × 1,460 mm × 2,700 mm Approx. Weight 2,100 kg Drive Type Electric, geared reducers Construction Heavy-duty steel frame, self-cleaning shafts Throughput (typical) 0.5–3 t/h depending on material type and knife configuration ♻️ Suitable For Plastic lumps, profiles, film, and containers Wood waste, pallets, and offcuts Electrical and electronic scrap (WEEE) Light metals, cans, general waste Paper, cardboard, and confidential document shredding

Condition: excellent (used), Original spacer rings 145 Ø x 86 Ø with 1 groove 16.5 mm in various widths, 1 used saw shaft 60 mm Ø with 2 wedges 16 mm wide including 1 sliding bush 120 mm effective clamping length with left-hand threaded clamping nut suitable for right-hand machine and bearing bush for front flap Bjdpfxewaiaaj Acyedi

Condition: used, Year of construction: 2019, functionality: fully functional, type of input current: three-phase, filling opening width: 700 mm, filling opening length: 750 mm, Untha RS 50 Shredder Power: 2 x 22 kW / 380 V 50 Hz Electrical cabinet – Siemens S7 Chamber dimensions: 700/750 mm Quick-change screen system. Weight approx. 3,500 kg. New knives. Machine in perfect condition. Price on request. More photos and a video of the machine in operation available upon request. Bsdpfsxlgqwox Acysdi Possibility to conduct tests. For more information, please call.

Condition: like new (used), Year of construction: 2024, operating hours: 370 h, functionality: fully functional, machine/vehicle number: 122, total length: 9,900 mm, total width: 2,450 mm, total height: 4,000 mm, overall weight: 21,000 kg, rotor diameter: 680 mm, rotational speed (max.): 42 rpm, power: 235.36 kW (320.00 HP), Equipment: rotational speed infinitely variable, Demo machine Arjes ekomaxx 800 Perfect shredder for green waste, waste, waste wood, plastic etc. Bedpfxsvzribj Acyjdi

Condition: good (used), Year of construction: 1981, Chain width: 340 mm Cutting height: 200 mm 2 x 45 kW motors Shaft diameter: 65 mm Electric height adjustment Feed speed variably adjustable via frequency inverter Bdsdpexiu Dmofx Acyoi Includes an additional 3 saw bushings and many spacer rings Still ready for demonstration in a small business; technically flawless condition, but has not been in use for quite some time

Condition: used, Year of construction: 2014, Empty weight: 100 kg Part suitable for: trucks Type number: 81393666126 TGS Occ cardanas MAN 1260 mm OEM : 81393666126 Bsdpfx Aexitxcecyedi Article nr.: C041010046-veiling Used cardan shaft MAN

Condition: excellent (used), 2 complete sets of white metal main bearings, each set consisting of 4 bearing shells, bearing inner Ø = main shaft Ø 140 mm, bearing outer Ø 200 mm or 220 mm, width of each shell 100 mm Bdedpowv Rphsfx Acyji

Condition: used, Empty weight: 100 kg Part suitable for: trucks Type number: A6574101002 Actros Occ cardanas Mercedes 1933 mm Bedpfx Aoxitw Sjcyodi OEM : A6574101002 Article nr.: C041004053-veiling Used Mercedes cardan shaft

Condition: used, Year of construction: 2014, Empty weight: 50 kg Part suitable for: trucks Type number: 81393246064 TGS Occ cardanas MAN OEM : 81393246064 Article nr.: C041010048-veiling Used cardan shaft MAN Bdsdpfexitvuox Acysi

Condition: used, Year of construction: 2014, Empty weight: 100 kg Part suitable for: trucks Type number: 81393266192 TGS Occ cardanas MAN 1980 mm OEM : 81393266192 Bdjdpfx Asxitvnecyei Article nr.: C041010047-veiling Used cardan shaft MAN

Year of construction: 2022, condition: used, New: Yes Field of application: Internal logistics Bedpfx Ajxip D Uecyodi Empty weight: 100 kg Part suitable for: machines Type number: 524-2693 CAT313 Cylinder seal Caterpillar OEM : 524-2693 Article nr.: S083013003N-veiling Cylinder seal Caterpillar

Condition: used, Drive: hydraulic Empty weight: 10 kg Part suitable for: trucks Type number: NH4C, 6090042021 Bdedpfoxip Dnsx Acyoi OEM : NH4C, 6090042021 Article nr.: S471999111-veiling Used Pto

Condition: used, Year of construction: 2023, Drive: hydraulic Empty weight: 25 kg Part suitable for: trucks Type number: 22770447, 21724563, PTR-OM FM Occ PTO Volvo OEM : 22770447, 21724563, PTR-OM Bdedpfx Acoxip Aweyji Article nr.: S471011021-veiling Used PTO Volvo

Condition: used, Drive: hydraulic Empty weight: 1 kg Part suitable for: trucks zf Bdedpfsxipz Tox Acysi Article nr.: S471999082-veiling Used Pto

Condition: used, Year of construction: 2011, Drive: hydraulic Empty weight: 20 kg Part suitable for: trucks Type number: EG650P EG650P Occ PTO EG650P GRS0905 Scania OEM : EG650P Article nr.: S471006015-veiling Used PTO EG650P GRS0905 Scania Bedpfexipzmex Acyjdi

Condition: used, Drive: hydraulic Empty weight: 2 kg Part suitable for: trucks HYDRO Bodpfoxipwhjx Acysdi Article nr.: S471999066-veiling Used Pto

Condition: used, Drive: hydraulic Empty weight: 1 kg Part suitable for: trucks Type number: 4200130000 OEM : 4200130000 Article nr.: S471999108-veiling Used Pto PZB Bjdpfx Acsxiptpsyedi