Used Setting Apparatus for sale (7,910)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower Pedexrgl Iopfx Agwsgu - Quick, easy and stable installation thanks to Easy-Click system

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,900 h, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Perfectly functioning machine with sub-spindle, chip conveyor, tool presetting, and set of tool holders and manuals Podpfx Aoxrgglegwsgu

Condition: refurbished (used), Year of construction: 2018, operating hours: 6,640 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 2,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 550 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, total height: 3,200 mm, total length: 6,350 mm, total width: 3,150 mm, table length: 1,250 mm, rotary table diameter: 600 mm, overall weight: 15,000 kg, spindle motor power: 17,000 W, spindle nose: ISO 40, tool length: 300 mm, tool weight: 7,000 g, Equipment: chip conveyor, Vertical machining center FAGIMA Jazz L5 AX TECHNICAL CHARACTERISTICS : CNC control : HEIDENHAIN iTNC 640 Number of simultaneous axes : 5 Stroke X axis : 2000 [mm] Stroke Y axis : 600 [mm] Stroke Z axis : 550 [mm] Feed rate on X, Y and Z axes : 20000 [mm/min] Traversing feeds X, Y and Z axes : 40000 [mm/min] Axes acceleration : 2.5 [mm/sec²] Min. distance spindle nose / table : 30 [mm] Table length : 1250 [mm] Table width : 800 [mm] Max. load on table : 500 [Kg] Rotary tilting table surface : 600 x 600 [mm] Stroke C axis : table revolution : 360 [°] Max. speed C axis : 25 [rpm] B axis swivelling stroke : -110 / +110 [°] Spindle type : ISO 40 Max. spindle speed : 15000 [rpm] Spindle power : 17 [kW] Tool changer magazin number of stations : 80 Max. tool length : 300 [mm] Max. weight of single tool : 7 [Kg] Total max. weight in tool changer magazin : 400 [Kg] Total power required : 57 [kVA] Supply voltage : 400 [V] Spindle running hours : 6640 [h] Weight : 15000 [Kg] EQUIPMENT INCLUDED : - HEIDENHAIN glass scales on all 3 axes - Coolant through spindle (20 bars) - Chip conveyor - Blowing inside + outside spindle - Collision monitoring Pgodpfx Agswu D A Sowou - Simultaneous 5-axis software - Electrical cabinet chiller - HEIDENHAIN part probe - HEIDENHAIN tool probe Machine visible under power in our premises by appointment. Price on request, loading on truck included. Worldwide shipping is possible. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The FAGIMA Jazz L 5 AX is a 5-axis continuous pendulum machining centre designed to provide optimum precision and flexibility for complex machining operations. Thanks to its 5 continuous axes, it can machine complex parts in a single configuration, reducing set-up times and increasing productivity. This machining centre is ideal for the aerospace, medical and automotive sectors, where tight tolerances and machining quality are essential. Comparable to well-known brands such as Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas and Alzmetall, the FAGIMA Jazz L 5 AX stands out for its ability to integrate milling, drilling and tapping operations with high precision. In addition to its multi-axis machining capabilities, it integrates perfectly into workshops equipped with CNC grinders, milling machines or machining centres, creating a complete solution for versatile machining operations.

Condition: used, Year of construction: 2011, Overview  This shrink packer was manufactured in 2011 by the Italian company Giemme Thermo. The Giemme SLH is a film-only shrink wrapping machine used for secondary packaging of multipack PET bottles (1.5 L format). The machine is equipped with two parallel lanes, allowing high throughput and flexibility in packaging configurations. The machine is no longer in production but still installed and will be available from December 2025. A set of spare parts is included, and dismantling and truck loading can be quoted separately. Technical data  Capacity: 20 cycles/min Formats: 2 × (3 × 2) × 1.5 L 6 × (2 × 1) × 1.5 L Application: Cider, lemonade, soda, carbonated beverages Power Supply: 40 kW Dimensions (L × W × H): 650 × 170 × 250 cm Configuration: Dual-lane infeed for higher flexibility Film Type: Shrink film only (no tray) Condition: Very good; still installed and connected Availability: 20 December 2025 Pgsdpoxrc Hhsfx Agweu

Year of construction: 2010, condition: like new (used), For sale from CW 47 It is a whole set, including a vacuum pump for transporting material and a conveyor. type E45.50 sequel Energy Podsu Avm Rjpfx Agwsgu LxWxH: 1700 mm x 1090 mm x 2600 mm, weight 1750 kg motor 18 kW - 30 kW knifes of rotor 2x3 or 2x5 hole: 470 x 510 mm

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Pgodpoxrb Rfefx Agwju Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: new, Year of construction: 2025, load capacity: 15,000 kg, Column-type turning device with 15-ton load capacity, available as a set or individually. 2 sides are driven. Machine is offered as a synchronized set or individually. Protec turning device / positioner Syncrolift. Pgedpfjw Nilajx Agwju Double-column design, wireless and manual hand remote control. Column adjustment: both columns electrically movable. Load capacity: 15,000 kg, 360° rotation. Torque: 21,000 Nm. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Rotation speed: 0.5 rpm. Clamping plate diameter: 1,000 mm. Rotational drive: 2 x 2.2 kW motors. The price refers to one unit with electric trolley included. The second unit as part of a set is 20% cheaper. Optional with articulated flange (cardan flange) upon request.

Condition: used, Year of construction: 2014, JÄCKEL MIG 405 output 400 AP +++++ Please note: Podpfx Agjhl Nndjwogu The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, neu ca. 6 Monate ab Auftragse 146260 € 2764.31 € 1200 mm 730 mm 1200 x 600 mm 1200 x 600 mm 1300 mm 5 - 30 m/min 0-2250 mm/min 0,001-32 mm 685 mm 560 mm 0-675 mm/min 500-2200 1/min 11 kW 5.5 kW 3.1 kW 3.1 kW 4790 mm 3207 mm 2305 mm 8100 kg 1150 kg 1600 kg 405 x 75 x 127 mm 0,0001 mm iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection & final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm I/O diagnosis & alarm display Max. table speed (X axis) 30 m/min Integrated machine-body temperature control Double V table ways are coated with Turcite-B. Table is driven by hydraulic system with cooling unit Pgedpfxowiqq Es Agwju Liner guideways coupled with precision ballscrew and AC servo moter for precise position on Y and Z axes Automatic lubrication system with a pressure switch to detect and shut down themachine when lubrication system is down Wheel flange with scale, clamping width 43~50 mm (1.7"~2") Grinding wheel Ø405x75xØ127mm (Ø16"x3"xØ5") double recessed Electromagnetic chuck 1200 x 600 mm Automatic dressing and compensation system (mounted over the wheel) LED machine lamp Integrated oil cooling system for lubrication, hydraulic and spindle Splash guard Double-sided water baffle Heat exchanger for electric cabinet Oil Film Guideway system Air purge spindle According to "CE" regulations Operating manual in English or German OPTIONS: Fully enclosed splash guard € 15.950,00

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann Robot with parts belt for feeding and disposal CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. For shaft parts loading and unloading there is a Lehmann Robot conveyor belts for loading and unloading . Pjdpfjxq E Ewex Agwegu *

Condition: reconditioned (used), functionality: fully functional, Worked overtaken subhead new Fortuna Automat A 3 rolls Press Pgjdpfxjcnz Tce Agwsu Revised subhead / knife Star Dough - recoated subhead with knife Cross in exchange Built with setting on request!

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg Pedpfx Asxfh Tmegwjgu - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: new, functionality: fully functional, load capacity: 10,000 kg, pivoting range: 360 °, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides driven Pedjxq S Rgjpfx Agwegu Machine offered as synchronized set or individually Protec turning device / positioner Syncrolift Double column, handheld remote control wireless and manual Column adjustment 2x electrically movable Load capacity 10,000 kg, 360° Minimum working height: 800 mm Maximum working height: 1,700 mm Speed 0.5 rpm Clamping plate diameter 900 mm Rotary drive 2 x 2.2 kW Torque 18,950 Nm The machine is also offered individually as mono model (more affordable) Available on request with articulated flange (cardan flange)

Condition: used, Year of construction: 1999, serial number 97665 welding power 280 kVA Baunorm EN: 60974-1 / EN Pgedpfxeuxfzpo Agwsu Brenner / Schlauchpaket

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. Podpfx Ajxdwndsgwogu > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: ready for operation (used), Year of construction: 2004, This COMAU C4G NH4 – 200 robot arm was manufactured in 2004. It is part of a set of 4 refurbished industrial robots, fully serviced and in excellent working condition. These units have been mechanically and electronically overhauled, ensuring reliable performance. Ideal for automation, assembly, or handling applications. Contact us for more information about this machine. Application Types Pgodoxq Humopfx Agwju Robotics

Condition: used, Year of construction: 2010, operating hours: 5,900 h, Serial number: FNH721E1NAHE5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19564 Specifications: - 2010 model - Hours: 5900 - 145 kW - Weight: 15000 kg - Central grease - Brand new weight - Snow bucket - Gravel bucket - Tires (see pictures) - Comes with a new set of tires - AC/climate - Videos - Ready for delivery in may Description: 2010 Case 721E wheel loader with snow and gravel bucket. It's a renovated cabin, new fabric on the ceiling, new glass It comes with a new set of tires. Ready for delivery in may Hours: 5900 Own weight: 15000 Pgodexq Duqepfx Agwou Total Weight: 15000 Kw: 145 Model: 721E hjullaster m/ snøskuffe og grusskuffe. Ny vekt og 2 sett dekk. SE VIDEO

Condition: new, Year of construction: 2025, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 911 kg traversing speed 180 m/min weight 4150 kg dimensions of the machine ca. 9392 x 2232 x 2307 mm Laser cutting machine with automatic shuttle table Configuration 1. Bodor Power 3kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Mortise-and-tenon type plate welded segmented bed 5. Stretched aluminum gantry 6. Bodor servo motor and driver 7. Bodor rack and pinion 8. One-click processing 9. Bodor Lightning perforation technology 10. Expert database for high-speed cutting 11. Automatic cutting gas pressure adjustment 12. Open door protection 13. Cutting malfunction alarm function 14. Ergonomic remote control (Bodor Mango®) 15. Active anti-collision function 16. Intelligent anti-shake 17. Gas-saving continuous flow nozzle 18. Intelligent maintenance reminder 19. WIFI internet connection Pgsdpfx Agewnt Eiowsu 20. Water cooler 21. Extraction system 22. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 14 mm STAINLESS STEEL 10 mm ALUMINUM 6 mm OPTIONAL: LANTEK EXPERT II CUT software incl. postprocessor Translated with (free version)

Condition: used, Technical data : Center width approx. 500 mm Center height above bed 125 mm 16 speeds from 125 - 2800 rpm Space requirement, length x width 1.2 x 0.6 m Estimated weight approx. 450 kg Podpsxq E Dmefx Agwsgu . Scope of delivery : Hand lever quick clamping device Electrical monitoring of whether the part clamping lever is in the open or clamped position 1 set of collets from 3.0 - 25.0 mm, increasing by 1 mm Cross support with two tool holders Turret with 6 tool holders .

Condition: used, Year of construction: 2009, 2009 current intensivity 300 A wire dia. 1 mm Pjdpfx Ageibd Uaswogu sofort einsatzbereit 239836 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), CATALOG NUMBER 7556 Technical data: - min / max width of the processed element 20 / 240mm - min / max height of the processed element 8 / 160mm - number of spindles 4 1) horizontal lower 240mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) horizontal upper 240mm 7.5kW - all heads adjustable up / down, right left - spindle diameter 40mm - from above: - 6 input rollers, pulling, toothed, including 2 double - 2 output rollers, pulling, smooth rubber - from below: - side pressure before and after the roller in the lower table - input roller, toothed, pulling, torsional in lower table before the first spindle - 2 pneumatic side clamps - pulling outfeed roller, metal, smooth - all rollers pressed pneumatically - length of the infeed table 2180mm - top adjustable top up/down - central lubrication - electric setting of planing thickness Pgjdpfxjvyzn Rs Agwsu - lifting motor 0.75kW - smooth regulation of feed speed on the inverter 6-30m/min - feed motor 3kW - feed on Cardan shafts - closed in the cabin + - diameters of the exhaust nozzle 4x150mm - dimensions length/width/height 3750x1750x1800mm - weight 3300kg ADVANTAGES - for 4 heads - ideal for wet and dry wood - used machine, perfect condition Net price: PLN 75,900 Price net: 17850 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: like new (used), functionality: fully functional, three-jaw chuck diameter: 400 mm, Hydraulic 3-jaw chuck from the Italian manufacturer SMW, model Autoblok 400BH. The set includes the parts shown in the photos: chuck, clamps, screws, and hard jaws. Pgedexq Amxjpfx Agwou

Condition: used, mileage: 771,000 km, Year of construction: 2019, Serial number: WMA21XZZ4KM81xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20612 Specifications: Km: Approx. 771,000 Transmission: Automatic Euro 6 Air suspension Turn on 3 Engine brake/Retarder 6x2 Tires (see pictures) Trailer hitch VBG 581 HP Length of plane: Approx. 7.85 m Frame set is included, but is marked by a lot of rust. Podpoxc Dp Ejfx Agwjgu Bed Radio/CD Air conditioning/AC Rear view camera Videos Service at local workshop and MAN Description: MAN Flatbed truck from 2019!Frame set can be included, but there is some rust here.Ready for delivery. Km: 771000 HK: 580 Technical approved: no EU-approved until: 15.05.2025 Own weight: 12320 Total Weight: 28000 Payload: 15605 Width: 254 Length: 1051 Euro: 6 Model: TGX 580 Gearbox: Automatic

Condition: used, Year of construction: 2003, saw blade diameter max. 300 mm speed setting 2 Stufen Podpoud Tq Tofx Agwogu inkl. 120 mm weight 450 kg

Condition: used, Year of construction: 1999, ampere 330 A Pedow Syggspfx Agwjgu mit Kabel