Used Second Operation for sale (28,926)

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Cgodpfx Asv Nhg Sjcyeu Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: new, - Large jointer tables made of cast iron - The jointer table adjustment is controlled via a precise parallelogram system, ensuring that the distance from the table tips to the cutterhead remains constant in every position - The large, stable fence made of anodized aluminum is easily movable and tiltable from 0° to 45° - The fence angle is readable from the working position - Supplied as standard with auxiliary fence - Large, four-knife cutterhead with precision bearings - Smooth operation thanks to precision engineering and heavy cast construction - Powerful industrial motor - Maximum user safety combined with the simplest operation - Chip removal display via scale - Manual table adjustment Codpfx Acju T Hrcsyogu - Motor protection switch Equipment Details -Includes foldable auxiliary fence for narrow workpieces -Manual quick adjustment for chip removal with scale and rotating knob Safety Guard -The safety guard is foldable and designed to provide operator protection without hindering work TERSA Models with Tersa Cutterhead System -No setting or screwing required -Cutter knives can be changed in seconds -Self-locking -Especially quiet operation -Perfect planing results This product comes with the 3-year Stürmer warranty upon online registration. Warranty only applicable to end customers in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3 - PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weight: - Product length approx.: 2750 mm - Product width/depth approx.: 1500 mm - Net weight approx.: 680 kg Jointer: - Total table length: 2720 mm - Infeed table length: 1498 mm - Max. depth of cut on jointer: 8 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90 – 45° Connection for extraction: - Extraction port diameter: 120 mm Setup Information: - Footprint length: 2750 mm - Footprint width/depth: 1604 mm - Footprint explanation: Dimensions reflect maximum travel or usable lengths. Electrical Data: - Main motor power: 7 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Cutterhead: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,500 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Leaf suspension - Differential lock - Air conditioning - Air-suspended seats - PTO (Power Take-Off) - Sun visor = Notes = VOLVO FMX13 500 8x4 EURO 6e L13 EuromixMTP Halfpipe Tipper 16m³ – 18m³ – 20m³ (HARDOX) Vehicle Equipment: Engine – New D13K500, 12.8 liters, 500 hp at 1,400–1,800 rpm, peak torque 2,500 Nm at 1,000–1,400 rpm, Euro 6e Transmission – AT2612, 12-speed “I-Shift” automated gearbox, suitable for gross combination weights up to 60 tons Emissions standard – Euro VI Step E Engine brake – Volvo Engine Brake+ and exhaust pressure regulator, max. deceleration D13: 375 kW / D17: 525 kW Wheelbase – 4,350 mm Design gross combination weight – 44 tons Drive axle ratio – 3.33:1 Front axle suspension – 3-leaf parabolic springs Front axle capacity – 16 tons (2 × 8-ton front axles) Fuel tank, left front – 290 liters, between first and second axle AdBlue tank – chassis-mounted right, 57 liters, between first and second axle Rear underrun protection – aluminum, fixed, slim, EU-approved Front axle tires – 315/80R22.5 – Drive axle tires – 315/80R22.5 Tire pressure monitoring I-See predictive cruise control (map-based topographical data, lower operating settings) Cruise control – with I-Roll and I-Cruise, steering wheel controls Instrumentation – High-performance 12" full digital instrument cluster DPF regeneration switch – for manual control and deactivation Start acceleration limiter – DEACTIVATED Electronic Stability Control (ESC) for low center of gravity loads Forward collision warning with AEBS emergency braking system Cab climate – Electronically controlled air conditioning with sun sensor GSR-compliant, rear-mounted camera at the end of the chassis Toll preparation kit for “Toll Collect” in Germany Additional cab insulation – extra thick insulation layer Cab color – Pure White – 1108White Daytime running lights – V-shaped Tipper Equipment: Euromix MTP TMK 16m³ – 18m³ – 20m³ halfpipe tipper (HARDOX) Half-round design CE standard Floor Hardox 450 – 8mm Sides Hardox 450 – 6mm Pendulum tailgate Spare wheel holder with lifting winch Aluminum mudguards Versatile lighting options Access steps to tipping body (steps inside the tipping bucket) EuromixMTP scissor-type tipping stabilizer Accessories: Hydraulically opening tailgate Tarpaulin manual or electric Chute for asphalt Toolbox Holder for shovel and broom Fire extinguisher Work lights Manual or electric sliding tarpaulin, with or without tarpaulin protection roof Folding underrun protection systems Partial discharge for small surfaces EUROMIX REAR TIPPER – DURABLE AND ROBUST FOR YOUR OPERATIONS! = Further Information = Csdpey An N Esfx Acysgu Year of manufacture: 2026 Front axle 1: Steered Front axle 2: Steered Number of cylinders: 6 Gross vehicle weight: 43,999 kg Body manufacturer: EuromixMTP TMK 18m³ – 20m³ APK (roadworthiness inspection): New TÜV upon delivery

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees • Knee gear • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Cjdpfxswkgq Re Acyogu Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. * The price in the offer refers to the basic version powered by a petrol engine * ​​Product on order * Net price

Condition: new, fuel type: gasoline, overall weight: 1,500 kg, operation weight: 1,600 kg, maximum load weight: 1,600 kg, lifting height: 1,110 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1600 WITH HYDRAULIC JIB - NEW TECHNICAL SPECIFICATIONS: • Lifting capacity: 1250 kg - PICK & CARRY • Hydraulic jib lifting capacity: 650 kg • Lifting capacity: 1600 kg with blade • Standard support blade Additional blade options: • Forks • Tow hook • 3 hydraulic extensions • Boom opening angle: 65 degrees • Vertical reach: 10 m - with optional equipment • Non-marking tracks • Extendable undercarriage: 780-1250 mm • Radio control • Column rotation: 50 degrees • Toggle gear • Optional 500 kg or 990 kg winch • Fixed and magnetic LED lighting AVAILABLE POWER SUPPLY VERSIONS: 3-in-1 - petrol engine, electric motor (230 V, 400 V, 110 V available) and lithium-ion batteries Diesel - powered only by the petrol engine Diesel-electric - powered by a petrol engine and a 230 V, 400 V, or 110 V electric engine OPTIONAL EQUIPMENT AVAILABLE: • 500 kg or 990 kg winch (optional) • Manual jib arm - extends reach by 1 m - Can be used with two manual jib cranes • Searcher hook - works in 6 positions, extending reach by 0.5 m • Radio control with display • Platform for standing on the machine - Platform for standing on the machine to increase counterweight (not necessary in standard use) • Load platform extension - Removable load platform extension 500 m • XP Mount - Mount for the XP Glass Grabber - Mount for the XP Glass Grabber • RAL Color - Choose your machine color from the RAL palette • Tow Hook - Option to attach a tow hook to the crane's transport platform • Ramps - 2.5 m long aluminum ramps The Befard XM1600 is a modern pick-and-carry mini crane designed for maximum functionality and mobility in challenging working conditions. Its compact dimensions easily fit through standard doorways, and the extendable crawlers, up to 1250 mm wide, ensure stability and safety during lifting operations. Codpfeyrf D Dsx Acyjgu This versatile model offers an impressive reach of up to 11.2 meters – enabling work at second-story height. The XM1600 mini crane can move loads up to 1250 kg, and with the dozer blade, its maximum lifting capacity increases to 1600 kg. The optional winch further enhances application flexibility, making the XM1600 mini crawler crane ideal for assembly, service, industrial, and construction work. Test equipment before purchase. * The listed price is for the basic gasoline-powered version. * Product available upon request. * Net price.

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. Cgsdpfxsu Nzwuo Acyju At the same time, the Powerbridge is supplied with energy again. *

Year of construction: 2004, condition: used, Technical details: candle diameter: 21 mm candle length: 300 mm capacity: 1872 Stück/h heating-up temprerature: 70-120 °C cycle time: 13 sec candle material: Paraffin/Stearin control: Siemens S 5 space requirement of the machine approx.: ca.L:24 xB: 2 xH: 5,2 m Candle Production Plant / Candle Molding Machine - This plant is applied for the production of parafin/stearin candles according to the casting process with a high degree of automation. - Multicoloured candles can be produced and equipped with various mould boxes (e.g. cylindrical board candles or pointed candles). - production capacity: for max. theoretical maximum performance of 1872 pieces / h with a minimum cycle time of 23 seconds per mould box with 12 candles with 300 mm pointed candles and board candles with diameter of 21 mm, continuous operation approx. 1200 pieces / h Cedpfx Aou Nw S Ijcyjgu Documentation available Price on a negotiable basis! *

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, warranty duration: 12 months, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment Codpfxeyycqxe Acyogu • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: used, Year of construction: 2020, front tire size: 0%, rear tire size: 0%, _____Base machine Aebi MT750, EU6C, 156 HP, 6 cylinder Used approx. 17,055 km approx. 1,141 operating hours Speed/Drive Speed limit 85 km/h, 7.5 t Permanent 4x4 drive with lockable center differential Rear axle differential lock Front axle differential lock Wheelbase/Suspension Wheelbase 2.75 m Seats Comfort seat with pneumatic self-adjustment for driver Bench seat for two passengers with toolbox Tyres 245/70 R 17.5 (143/141J) 17.5 x 6.75 SINGLE Cabin Cab color orange RAL 2011 Cgsdpfxoyq Atte Acysu Air conditioning including spiral fan Heated exterior mirrors 3-pin exterior socket for winter service lighting Winter service lighting with two headlights 13-pin exterior socket for rear attachment for trailer operation Hydraulics 3rd circuit: 14.4 ccm movement hydraulic pump & 21.1 ccm pump 1st front auxiliary valve for movement hydraulics right 1x DW 2nd front auxiliary valve for movement hydraulics left 1x DW PTO on reduction gearbox max. 82 KW SAE4, mandatory for semi-hydrostatic drive Miscellaneous Radio DAB+/Bluetooth/USB Corrosion protection package Work light on stand at rear cab wall Warning markings red/white Front implement plate DIN B (size 3) Ball hitch 3.5 t (type DEDALO GS501) Automatic trailer coupling 3.5 t Rear axle single, standard springs Clutch booster Customer special equipment 1243193-2 Reversing camera 1279441-6 Tyres 245 with snowflake symbol 1224041-6 Second work light 1270690-3 Preparation for light bar Hydrostat MT740/MT750 Aebi MT torsion frame MT750 three-way tipper Profi Auxiliary heater Aebi MT740/750 ----- incl. snow plough VPL24 Year of manufacture 2020 P68-35025015 Plough VPL-24 161353 Cutting edges Kombi 36 (VPL-24) P68-35000230 Parallelogram with mounting plate size 3 P68-35080098 Hydraulic super swiveling with DBV - 12 volt (VPL-15/18/21/24/27/30) 440902 Hydraulic couplings for MULTICAR (Flat Face) P68-35060360 Set of hydraulic hoses VPL Super Swiveling with DBV 313113 Glide shoe, complete VPL (set) 357461 Warning flags with plastic handle (set) P68-12VOLT 12 volt, Location: 93095 Hagelstadt

Condition: used, mileage: 1,004,000 km, power: 310 kW (421.48 HP), first registration: 01/2018, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, next inspection (TÜV): 01/2027, color: red, gearing type: automatic, emission class: euro6, total width: 2,600 mm, Year of construction: 2018, Equipment: ABS, air conditioning, tail-lift, MB ACTROS 6x2 CARRIER TRS ICELAND TAIL LIFT TOP CONDITION Box: Cool / Freeze / Flowers Frigo Heiwo 28 Lift capacity: 2,000 kg Dhollandia tail-lift Refrigeration: Carrier TRS Iceland, temperature range from -30°C to +30°C Tail lift: Dhollandia 2,000 kg First registration: ? 28 TÜV inspection valid until: ? 2027 Mileage: 1,004,000 km Engine power: 310 kW (422 hp) Transmission: Automatic Box dimensions (L x W x H, internal): 840 x 250 x 277 cm Truck dimensions (L x W x H, external): 1,090 x 260 x 400 cm Unladen weight: 13,470 kg Payload capacity: 13,530 kg Gross vehicle weight (GVW): 27,000 kg Gross combination weight (GCW): 50,000 kg Color: Red, original paint Suspension: leaf springs on front axle, air suspension on 2nd and 3rd axle Emission class: Euro 6 C Axle configuration: 6x2 Tire size axle 1: 385/55 R22.5 L50% / R50% Cgedpfx Ajzayduscyju Tire size axle 2: 315/70 R22.5 L70% / R70% Tire size axle 3: 385/65 R22.5 L50% / R50% Cab type: Large cab Equipment: Automatic transmission, engine brake, stationary air conditioning, auxiliary heater, refrigeration unit, adaptive cruise control, 2 beds, radio/CD player, TRS Carrier Iceland cooling unit, temperature control from -30 to +30°C, 1,200-liter diesel tank, fully insulated box body (built in 28), extremely robust and in excellent condition, 5 stainless steel load securing rails in the floor and ceiling (incl. 5 poles), 1 horizontal load securing rail, multiple additional lights, pneumatic Rockinger trailer coupling, lift axle, ABS, EBS, complete service history available, direct from first owner, immediately available and operational, box size fits for 26 Danish trolleys or 14 auction carts, 16 standard pallets or 20 Euro pallets, etc. Can be delivered with: 2-axle Heiwo Frigo trailer TRS Iceland 24 m³ with tail lift and double rear doors Box: Cool / Freeze / Flowers Frigo Heiwo Chassis make and type: Heiwo ZA 18 Refrigeration: Carrier TRS Iceland First registration: TÜV inspection valid until: ? 2027 FRC ATP: No Internal dimensions (L x W x H): 712 x 250 x 285 cm Adjustable drawbar length: 60 cm Unladen weight: 6,680 kg Payload: 12,320 kg Gross vehicle weight: 19,000 kg Lift: Dhollandia 2,000 kg Suspension: Air suspension Axles: SAF axles with disc brakes Tire size: 385/55 R22.5 Tread depth axle 1: L50% / R50% Tread depth axle 2: L50% / R50% Extras: Adjustable drawbar (60 cm), Carrier TRS Iceland cooling unit, Dhollandia 2,000 kg tail-lift, ABS, EBS, SAF axles with disc brakes, 2 tool boxes, fully insulated Heiwo body, 5 stainless steel rails in floor and ceiling, 1 horizontal cargo rail, additional lighting, rear doors, rear bumper, ferry connections, complete service history available, immediately available and ready for operation. The body accommodates 22 Danish trolleys and 14 standard pallets. STUNNING COMBI UNIT, ENTIRELY FROM YEAR 28 ROCK SOLID BODIES, READY FOR IMMEDIATE USE Further information: * Payload: 13,530 kg * Type | First axle: Michelin R * Tire size | First axle: 385/55 R22.5 * Tread depth inside left | First axle: 30% * Tread depth inside right | First axle: 30% * Max. axle load | First axle: 8,000 kg * Type | Second axle: Michelin R * Type | Third axle: Michelin R * Tire size | Second axle: 315/70 R22.5 * Tire size | Third axle: 385/55 R22.5 * Tread depth outside left | Second axle: 30% * Tread depth inside left | Second axle: 30% * Tread profile... (text cuts off)

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full specification available on request. Loading area: * Extendable loading platform with pneumatically operated locking mechanism * Loading area with approx. 30 mm thick wooden planks * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tension straps (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres: 385/65 R 22.5, manufacturer at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the truck is via the standardized EBS interface as per ISO 11992. For proper display, the truck must be capable of receiving and showing this data. Axle: * BPW axles and suspension * All axles hydromechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (offset 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system in accordance with EU regulations, EBS-E (2S2M) without connection lines to the tractor unit Steel construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash together with indicators * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal coating adhesion * Final painting with two coats of 2-component topcoat, single color, RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, with axle tracking monitoring (without installation in the tractor unit) * Electro-hydraulic unit * 4 wheel chocks with holders on the front wall Cedpfx Aew Tpr Iscysgu * 2" kingpin * Yellow-red air couplings at the galvanized front connection bar * At gooseneck and rear, left and right, brackets for warning panels, including sockets * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the external frame of the loading platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking position is provided in the extension for a 45' container * 4 pairs of transverse stake pocket strips in the loading area for approx. 100 x 50 mm plug-in stakes * Storage for max. 9 pairs of plug-in stakes bolted inside to the front wall * Boarding ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted front left under the loading platform * An additional INOX toolbox, approx. 1,200 x 46...

Year of construction: 2019, condition: excellent (used), functionality: fully functional, CNC machining center with 4 controlled axes and automatic spindle rotation (0-180°). This enables the machine to reach all 3 profile sides of the workpiece without manual repositioning. The machine is equipped with a water-cooled spindle capable of 20,000 rpm. It is suitable for machining profile bars or parts made of aluminum, PVC, light metal alloys, and steel up to 2 mm. Features a manual tool magazine with 9 slots and an automatic tool magazine with 4 slots on the left side of the enclosure. Additionally, it has a second automatic tool magazine with 4 slots on the right side of the enclosure. The profile is positioned by a pneumatically operated stop on the left, and secured by 4 robust clamps that are positioned and monitored automatically. With a second pneumatic stop on the right-hand side, processing of long bars—twice the machining length (overlength machining)—is possible. A movable clamping area also simplifies loading and unloading of workpieces and considerably increases the maximum workable cross-section. The machine comes with the following special equipment: Cedsyzb Ekspfx Acyegu - CamPlus software - Shape software for creating custom machining operations and for importing machining drawings/contours - An additional tool magazine - A second stop - A safety enclosure (fully enclosed) Setup, commissioning, and operator training can also be provided by us!

Condition: used, Year of construction: 2003, machine/vehicle number: LC632, Used KRONES spirits filling line, roud glass 500 BPM - year 2003Technical Specifications & Performance DataThis complete round glass bottling line delivers high-speed performance for industrial packaging and beverage production. Built around Krones engineering, the line is configured for glass bottles in 0.7L, 0.75L, and 1.0L formats. With an output of 500–600 BPM (up to 36,000 bottles per hour), it is a robust second hand solution for producers seeking reliable throughput and consistent product quality.Production speed: 500–600 BPM (up to 36,000 bph)Filling type: vacuum filing Bottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainers: Designed for Glass bottle handlingCore components (models): Krones Variojet (72-head rinser), Krones Isofill (108-head isobaric filler), Krones Topmatic/Zalkin (18-head capper), Cold glue front & back labeling, Logics & Control Logilook label inspection (2015), Krones Kettner Wrapapac W60 (wraparound case packer), Krones/Kettner Robogrip robot, Krones Multidivider laner, Amberflex spiral case elevator, Linx 7900 bottle coder (2017), Orwak 9020 waste compactor (2006)Case formats: Wraparound boxes, 6 & 12 pack configurationsMain build year: 2003 (with upgrades in 2006, 2015, and 2017)Electrical supply: 415 V, 50 Hz (most main equipment); auxiliary devices at 240 V, 50 HzAdvanced Automation & Control SystemsThe line integrates automated material handling and inspection to ensure stable operation and quality assurance. The Krones Multidivider laner and Robogrip robotic handling enhance flow balance and downstream palletizing, while the Logilook system provides label presence and position verification. Changeovers between compatible glass formats are supported by standardized Krones change parts and adjustable guide-rails for efficient setup.Automated depalletizing, lane division, and robotic case handlingInline label inspection for consistent presentationOperator HMI terminals at key stations (typical Krones layout)Rapid format adjustments for 0.7L, 0.75L, and 1.0LStable 50 Hz operation; widely supported industrial componentsProduction Line Integration CapabilitiesThis used bottling line is designed for seamless in-line operation from bottle depalletizing to case packing. It accommodates round glass bottles and integrates labeling, coding, and inspection for end-to-end quality control. The wraparound case packer enables efficient secondary packaging for 6- and 12-pack configurations, ensuring compatibility with standard palletizing patterns.End-to-end flow: depalletizer → rinser → isobaric filler → capper → cold glue labeller → label check → coder → laner → case packer → spiral case elevator → palletizing robotSuitable for beverage production requiring glass bottle processingModular stations allow standalone testing or full inline operationMachine Condition & Maintenance HistoryManufactured in 2003 with subsequent upgrades in 2006 (waste handling), 2015 (label inspection... Cjdpfoy Ud Alsx Acysgu

Condition: used, Year of construction: 1996, machine/vehicle number: LC633, Used STORK minature line fro glass & PET 200 BPMTechnical Specifications & Performance DataThis used bottling line is engineered for miniature formats and optimized for high-efficiency beverage production. Configured specifically for 50 ml bottles, it handles both PET and Glass containers and supports multiple shapes including flask, oval, and round. The core of the line is a Stork rinser–filler–capper monoblock with a 36-head rinsing/filling carousel and a 9-head capping turret. Downstream operations include a Krones Autocol 3-station self-adhesive labeling machine for front and back labels, integrated inspection and rejection systems, and complete case packing, sealing, coding, and conveying.Production speed: 200 BPM (miniature 0.05L bottles)Filling type: vacuum filling Bottle formats: Compatible with 0.05L bottle formatContainers: Designed for PET and Glass bottle handlingSupported shapes: Flask, oval, roundMonoblock configuration: 36-head rinser/filler, 9-head capperClosures: ROPP, cap sizes 18×12 and 20×12Labeling: Krones Autocol, 3 stations, self-adhesive front and backInspection: Level control with case reject, checkweigher, scale checkEnd-of-line: Case packer, case sealer, case coder with reject, case erectorElectrical: 415 V / 50 Hz (main equipment), 240 V / 50 Hz (auxiliaries)Key model references: Logilevel HF1400, Logiweight LS, Autocol, U375, C890, 800AF-E, Spiralveyor SVManufactured by: Stork (core monoblock); major components by Krones, Garvens, Linx, 3M, Kettner, AmbaflexAdvanced Automation & Control SystemsThe line features modernized automation with a new PLC/HMI installed in 2021 on the Stork monoblock for improved diagnostics, recipe management, and process stability. Integrated inspection modules provide level control and automatic reject functionality, while the checkweigher and scale check ensure consistent fill accuracy for 50 ml packaging. Electrical distribution supports mixed voltages with 415 V / 50 Hz for primary machines and 240 V / 50 Hz for auxiliary systems. Change parts and synchronized conveyors support quick transitions among miniature flask, oval, and round formats.Production Line Integration CapabilitiesThe system is designed as a complete packaging solution from bottle infeed through case handling. Stainless-steel header tank and bottle conveyors stabilize upstream product and container flow. The Krones Autocol labeler integrates seamlessly with miniature bottle handling for precise self-adhesive label placement. Downstream, a coordinated end-of-line section provides case packing, sealing, coding with reject, case erection, and a spiral conveyor for efficient elevation and accumulation management. The line’s configuration is ideal for second hand industrial packaging upgrades or integration into existing beverage production environments focused on miniature formats.Machine Condition & Maintenance HistoryThe core monoblock and labeler date to 1996, with significant au... Cgedpey Uduusfx Acyou

Year of construction: 2012, operating hours: 500 h, condition: used, machine/vehicle number: AT107, Technical Specifications & Performance DataThis UHT system with integrated homogenizer is engineered for continuous ultra-high temperature processing in beverage production and industrial packaging environments. The unit belongs to the 6.3T capacity class and is suitable for aseptic downstream filling as part of a used bottling line or as a second hand standalone processing module. Designed to reach high sterilization temperatures, it ensures product safety and extended ambient shelf life when combined with aseptic handling.Process type: Continuous indirect UHT treatment with integrated homogenizationThroughput class: 6.3TMaximum process temperature: Up to 144°CConfiguration: UHT module plus homogenizerOperation: Continuous processing for high uptimeBuild: Industrial, hygienic design suitable for beverage and dairy applicationsAdvanced Automation & Control SystemsThe system is prepared for modern automation architectures, supporting PLC/HMI-based operation with recipe-driven control and monitored process parameters. Operator guidance and safety interlocks help maintain stable thermal profiles and consistent homogenization outcomes.Automated temperature control for heating, holding, and cooling sectionsRecipe-based setpoints for repeatable product changesOperator HMI for real-time status, alarms, and trend visibilityInterlocks for safe operation and process integrityProduction Line Integration CapabilitiesThis processing unit integrates upstream with raw product reception and downstream with aseptic tanks, fillers, and packaging machinery. It can operate as a standalone skid or be embedded within a broader beverage production line.Inline or standalone operation for flexible plant layoutsCompatible with aseptic tanks and filling machinesSupports multi-product workflows (e.g., milk and juice) with recipe controlDesigned for efficient changeover between products within the same categoryMachine Condition & Maintenance HistoryThe equipment is offered as a second hand unit in as-is condition with no missing parts. Having accumulated only 150 operational hours, the machine is in excellent working order. The new model generation ensures contemporary design principles, while the as-is sale allows rapid deployment for plants seeking proven technology at competitive lead times.Condition: As-is (Only 150 operating hours)Completeness: No missing partsModel generation: New modelOperational Performance & VersatilityCombining UHT treatment with an integrated homogenizer delivers both microbial stability and controlled product texture. This makes the system ideal for beverage production workflows requiring long shelf life with preserved sensory attributes.Suitable for milk and juice process applicationsHomogenization for stable emulsions and improved mouthfeelHigh thermal capability up to 144°C for robust sterilization marginsConsistent process quality for industrial packaging operations Codpfoy Uc T Nox Acyjgu

Condition: used, Year of construction: 2020, operating hours: 14,500 h, machine/vehicle number: M335, Used SIG filler combibloc 26500 BPH - Year 2020Technical Specifications & Performance DataThis aseptic carton filling monoblock is engineered for high-efficiency beverage production and industrial packaging applications. Manufactured by SIG Combibloc, it combines robust aseptic technology with modern upgrades for increased throughput. This second hand, high-performance unit integrates seamlessly into a used bottling line or packaging line, supporting fast changeovers and consistent output quality. Line Volume Speed Equipment Description Year of Manufacture Csdpsy Uc Tvefx Acyjgu SIG-A HMR ~ 14500 65ML, 125ML, 200ML 26500 H2O2 SYSTEM-LK-57VC-02-2022 2022 COMBIBLOC FILLER-871251055-2020 2020 FILLER SPEED UP CONVERSION KIT-SIG 2024 STEPER MOTOR FILLER SPEED UP CONVERSION KIT 2024 Manufacturer: SIG CombiblocMachine type: Aseptic carton filling monoblockMain manufacturing year: 2020Production speed: up to 26,500 units/hourFormats supported: Compatible with 0.065L, 0.125L, 0.2L carton formatsContainer types: Designed for Carton handlingAseptic technology: H2O2 sterilization system (commissioned 2022)Upgrades: Filler speed-up conversion kit and stepper motor conversion kit (installed 2024)Operating hours: approximately 14,500Operation: Linear monoblock configurationAdvanced Automation & Control SystemsThe monoblock incorporates advanced automation features to stabilize performance at higher speeds and minimize operator intervention. The 2024 speed-up conversion kit and stepper motor upgrade enhance dosing accuracy and acceleration profiles, supporting smoother startups and reduced cycle times. Integrated controls enable recipe-based format changes, fault diagnostics, and production data visibility. Safety interlocks and clear HMI prompts contribute to predictable uptime and simplified operation.Production Line Integration CapabilitiesDesigned for flexible integration within a complete packaging line, this aseptic filler can operate inline with carton forming, top application, conveyors, and end-of-line equipment. It is well-suited for modernization projects or expansions of a used bottling line or second hand packaging line. Format changeovers cover common single-serve to small multi-serve cartons, enabling efficient SKU rotation without extensive mechanical reconfiguration. The linear design supports straightforward connection to upstream and downstream packaging machinery.Machine Condition & Maintenance HistoryThe equipment presents as a maintained, ready-for-operation unit with approximately 14,500 operating hours. Notable lifecycle enhancements include a 2022 H2O2 sterilization system...

Condition: ready for operation (used), functionality: fully functional, total width: 13,800 mm, cutting length (max.): 6,900 mm, Roof Truss Pressing System (C-Type) – Complete Production Line with Crane Complete, fully equipped roof truss pressing system for sale. The system is in good technical condition, regularly maintained, and ready for immediate operation – no additional investment required. Csdpfoymmrlox Acysgu Designed for professional timber structure manufacturing, suitable for small to medium-scale production. 🔧 Included Equipment • Hydraulic roof truss press • C-type configuration • Assembly & pressing tables • Floor-mounted rail system: 12 m • Second-hand tables: 12 pcs • Like new Randek pressing tables: 4 pcs – 550 mm • Like new Randek ridge table: 1 pc – 900 mm • Overhead crane system • Crane radius: 6.9 m 📌 Key Advantages • Fully operational – plug-and-produce setup • No immediate repair or upgrade costs • Efficient workflow layout with integrated rail system and magnetic tables • Ideal for prefabricated roof truss production 📍 Additional Information • On-site inspection available • Suitable for companies entering or expanding in timber construction • High-quality industrial-grade equipment • Transportation costs are not included.

Condition: new, mileage: 10 km, power: 130 kW (176.75 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 7, loading space length: 2,700 mm, loading space width: 2,040 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Volkswagen Crafter 35 “New Model 2025” Double Cab Flatbed Medium Wheelbase 3640mm, 3500kg Permissible Gross Weight, 2.0 TDI 130KW/177HP 4-Motion All-Wheel Drive, 8-Speed Automatic Transmission in Candy White, 7-Seater, Immediately Available German list price new: €72,144 incl. VAT * 5-year factory warranty up to 250,000 km * Flatbed internal dimensions: 2,700mm x 2,040mm * 7-seater * Comfort seat left with armrest integrated in the door panel, adjustable seat cushion angle, various seat adjustments, manually adjustable 2-way lumbar support * Passenger double bench with stowage compartment; backrest foldable into a table * Four-seat bench in second row * Flatbed floor, fold-down aluminum side panels, lashing rings, access steps (rear on side wall flap) * Fixed tow bar with 2,800kg towing capacity (upgrade possible to 3,500kg) Csdpeynp A Nefx Acysgu * Climatic manual air conditioning in cab * PDC front and rear parking sensors * Cruise control * Hill start assist * Spare wheel (steel rim) with road tires plus on-board tools and jack * Visual and audible seat belt warning front (visual and audible) and rear (visual) * Lockable and illuminated glove compartment * Bulkhead with window * Infotainment system with 26 cm (10.4”) color touchscreen, 4 speakers, 2 USB-C data/charging ports (center console) with high charging performance and 2 USB-C charging ports (middle, windshield), wired & wireless App-Connect (Apple Carplay, MirrorLink, Android Auto) * Traffic sign recognition * Comfort Bluetooth hands-free system * Digital cockpit * On-board computer with driver attention and fatigue detection * Rubber flooring in cab * Side marker lights * Electrically adjustable and heated exterior mirrors * Front bumper in grey with color-coded insert * Central locking system with remote and interior operation * Leather multifunction steering wheel with shift paddles / Tiptronic * Central locking “Keyless-Go” without safe-locking feature * Front Assist with vehicle, pedestrian, and cyclist detection and emergency braking * Light and visibility package incl. automatic headlight and rain sensors / daytime running light with assist function as well as automatic coming-home / leaving-home feature * Lane keep assist * 1 wheel chock * Tire pressure monitoring * Storage package 2 Further equipment: Driver and front passenger airbag with passenger airbag deactivation, automatic headlight control, convex exterior mirrors (left & right), LED turn indicators integrated into exterior mirrors, twin headlights, dual-tone horn, power windows front, laminated windshield, 2 folding remote keys, A-pillar grab handles, lockable glovebox, LED cab interior lighting, Double Cab Chassis body, 75-litre fuel tank, radiator grille with upper chrome trim, adjustable steering column, headlight range adjustment, truck registration, engine 2.0 litre - 130 kW TDI, rear fog light, emergency call system, 3640mm wheelbase, Euro 6d emissions standard, SCR system (AdBlue technology), electro-mechanical power steering, fabric seat trim, start/stop system, heat-insulating glazing, gross vehicle weight 3.5t Financing, leasing, and trade-in possible Affordable installation of accessories and optional extra equipment possible (all price samples incl. installation and VAT):

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: Cgedsxdh Hqjpfx Acyou • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: used, Year of construction: 2019, gebraucht 2019 5505 prompt, Zwischenverkauf v Cedpfxowiqwls Acyogu Niederlande 2670 € 1 100 x 2.000 mm 20 - 76,1 mm 1 3 kW 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, maximum load weight: 42,900 kg, overall weight: 55,000 kg, axle configuration: 3 axles, loading space length: 29,000 mm, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. LOADING PLATFORM: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform with double-extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective loading platform length (except for the supply to the first and second lock) * Technical fifth wheel load: 25,000 kg for tractor units: 4x2, 6x2 and 6x4 * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, all axles forced steered hydro-mechanically, mounted on turntables * Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve * 275/70 R 22.5 3PMSF twin tyres. Brand of our choice * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * At the king pin 1 pair of lashing rings (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets integrated in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket bar mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets integrated in the outer frame of the loading platform, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings lying in the outer frame of the loading platform, foldable outward * Rear and front steering operable via cable remote control, with single-track axle control, no installation in the tractor unit required * Last axle with air suspension venting activated when the parking brake is applied * Steel front wall, approx. 1,600 mm high, certified according to EN 12642: 2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing gear, wired to the tractor unit connection * Wooden floor approx. 32 mm thick on the gooseneck and loading platform * At the extension tube with large cross-section, one locking position every approx. 500 mm * At the extension tube with small cross-section, one locking position every approx. 1,000 mm, allowing for locking every approx. 500 mm * Cut-outs in the outer frame of the loading platform for hooking lashing straps (LC 2,500 daN) * 4 crosswise stake pocket bars mounted in the loading platform floor, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle with automatic lift axle function as well as starting... Cgjdpfxeyvnd No Acyeu

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours 12 minutes 03 seconds (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours 38 minutes 37 seconds- Automatic Machining Time: 5,877 hours 48 minutes 01 seconds- Operating Time / Power On Time: 26,902 hours 54 minutes 33 seconds- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)- The machine is equipped with an IKZ and a 30-round magazine Cgodpfx Aoy T Hbzscyou

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) Cgodpow Nafkjfx Acyeu - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Cgjdozabnzopfx Acysu Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: used, Year of construction: 2023, gebraucht 2023 5543 prompt, Zwischenverkauf v Niederlande 3100 € 1 100 x 2.000 mm 20 - 76,1 mm 1 3 kW 190 kg Demo machine / mint condition Net price (price for new machine € 3.911,00) The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. Cedpfjynmwqox Acysgu • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details: