Used Scribing Cutter for sale (2,917)

Condition: excellent (used), Chain chisel KF20 Dsdeuhn Afspfx Ac Noun With chain set Chain chisel can also be used as a hand chisel

Year of construction: 2016, condition: as good as new (ex-display), Face milling cutter Duedpfefmxh Tox Ac Nsn Make Mitsubishi Type AHX 640 W-315 CA28 R Diameter 315 mm Weight 31 kg

Condition: excellent (used), Face milling cutter (28148) Make ISCAR 139,8 mm milling diameter Djdpfx Ajg Er H Rsc Nsun 7,15 mm maximum depth of cut 8 cutting inserts possible weight with carton 3,8 kg

Condition: used, Module milling cutter Dsdodklt Njpfx Ac Njun Module 8 20 degrees Length 1800 mm Diameter 120 mm inside 40 mm

Condition: used, Circle cutter MK 5 from 50 - 200 mm in diameter Dusdpfxecxqbgo Ac Nsn

Condition: used, Diameter centering pin 60 mm Diameter bolt circle 4 inch 102 mm Dodsb Tyrvspfx Ac Nsun 4 thread MK 16 contact surface 128 mm Diameter vario hole 80 mm

Year of construction: 2016, condition: excellent (used), Indexable insert milling cutter - Face milling cutter Dusdpfx Aofc Tq Ejc Njn Make Mitsubishi Type AHX 640 W 160 C 22 R Multicorner Face milling cutter for high feed rates for 22 heptagonal inserts Cutter diameter 160 mm

Year of construction: 2016, condition: as good as new (ex-display), Face milling cutter Cutter head Make Mitsubishi Dusdpfxefmch Is Ac Njn Type AHX 640 W-315 CA28 R Diameter 315 mm Weight 31kg

Condition: excellent (used), Prism milling cutters Make Swiss franc & Orion 90 degrees 8 x 63 mm diameter Duedsdwmnpspfx Ac Njn 4 x ca. 100 mm diameter

Condition: not inspected (used), Year of construction: 2010, ZUANI cutters for wood-aluminum windows The stated price is for all 4 cutters. Dusdexlk Nkopfx Ac Nsn If you need the manufacturer numbers of the cutters, please send an email!

Condition: new, PRICE: 3000 EUR Type: SC 20 Completely made of special stainless steel 20-liter bowl made of stainless steel Dujdpfx Asunakiec Nen Knives speed frequent speed regulation (6 speed) Main cover made of special steel, stainless steel 3 knives in set Machine dimensions in cm: Width: 83 Depth: 63 Height: 91 Electric power: 1,5 kW Voltage: 380 V, 50 Hz

Condition: like new (used), Cutter Manufacturer: Krämer Grebe Wetter Stainless steel Dusdpfexrvtzjx Ac Njn Capacity: 65 liters 2 knife speeds 6 knives Power: 25kW

Condition: used, Cutter Manufacturer: Kramer Grebe Wetter Bowl made out of stainless steel Dimensions: 290x244x210cm Control voltage: 230V Operating voltage: 400V / 50Hz Power: 74kW Dusdex Dcfnspfx Ac Nen

Condition: reconditioned (used), functionality: fully functional, IMA Adapter Unit with Interchangeable Flush Trimming Head and Flat Scraper Blade The IMA adapter unit is a refurbished interchangeable unit designed for flush trimming operations and equipped with a flat scraper blade. Featuring the article number 10 237 069 and an HSK 63 F clamping system, this unit is ideal for precise and secure machining tasks. The unit’s rotation is synchronized with the drive rotation, and it includes a 57 mm opening. Specifically designed for use with IMA machines, it supports tools with chamfer milling cutters. Included in the package is a flat scraper blade. The bolt dimensions are 16/18.1 mm. The unit can reach a maximum speed of 9000 revolutions per minute and has a maximum probing depth of 1.5 mm. Following a comprehensive refurbishment, which includes inspection, replacement of bearings, and new pneumatic hoses, the unit offers maximum safety, precision, and a nearly new condition. Used adapter units are taken from operational systems and are fully functional. Any age-related wear or significant precision limitations are clearly noted. Technical Description • Product: IMA Adapter Unit with Interchangeable Flush Trimming Head and Flat Scraper Blade • Article Number: 10 237 069 • Clamping System: HSK 63 F • Condition: Refurbished • Rotation: Synchronized with drive rotation • Opening: 57 mm Dsdpfx Asudl Idjc Njun • Support Bolt: For IMA machines • Tools: Compatible with chamfer milling cutters • Flat Scraper Blade: Included • Bolt Dimensions: 16/18.1 mm • Maximum Speed: 9000 RPM • Maximum Probing Depth: 1.5 mm • Special Features: • Inspected and fully re-bearings for maximum safety and precision • Pneumatic hoses replaced • Nearly new condition Note: Used adapter units are fully functional, extracted from operational systems. Explicit notice is provided for excessive wear or significant precision reductions due to aging.

Condition: like new (used), Bowl cutter Manufacturer: Seydelmann adjustable knife speeds 2 mixing speed 2 separate bowl speeds Dusdpexuliksfx Ac Nen Completely made of special stainless steel 200 liters bowl volume made of stainless steel Dimensios: 300x250x200cm Power: 110 kW Net weight: 2880 kg

Condition: new, functionality: fully functional, Fabr. Vergnano - 4 pcs pre-grinding solid steel hob cutters EGW 20 New - unused Cutting material - grade MC90 HRC 67+68 Alcrona coating Solid steel hob cutter 40x60x16 Hob cutter (Ø 40x60, bore Ø 16, roughing cutter, overlap) Solid steel hob cutter Duedpfx Aewb Dfasc Nsn Fabr. Saazor - 6 pcs, cutting material carbide K-grade + TiAlN Carbide cutters made of HM K-grade material EGW 20, mod 0.8 Ø40x60, bore Ø16 All cutters are new and unused in original packaging Price on request All technical data subject to typographical errors/mistakes Sale exclusively to EU countries.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm Djdpjwxxdfofx Ac Neun >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device Dedsvbifgjpfx Ac Noun To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: excellent (used), Year of construction: 2007, 5 controlled axes: X, Y, Z, A, and B Fully automatic grinding wheel changer NUM Axium Power 1050 control system with PC TOOL DATA Max. diameter: Ø 250 mm Max. diameter for complete machining: Ø 250 mm Max. length for complete machining (from front edge of workpiece support): 430 mm Max. tool length between centers: 480 mm Center height: 195 mm X-axis grinding travel: 625 mm Z-axis cross slide travel: 305 mm Y-axis vertical slide travel: 305 mm All linear axes are driven by high-precision ball screw spindles with 2 preloaded nuts. The axes are guided on extremely robust recirculating roller shoes on hardened rails. GRINDING HEAD, B AXIS Swiveling range in the horizontal plane: 240° Rotational speed: 120°/s Liquid-cooled motor spindle: 150 x 150 mm Grinding wheel mount with automatic quick-clamping system HSK - C/E 50 Spindle speed infinitely variable: 2,000 - 10,000 rpm Max. grinding wheel diameter: 150 mm Grinding wheel changer with 4 magazine slots Second probe arranged on the workpiece holder for automatic grinding wheel measurement, including software CHAIN LOADING MAGAZINE with PICK-UP arm Capacity: 160 tools Maximum workpiece diameter: 32 mm Maximum workpiece length: 200 mm Maximum tool weight: 2.5 kg Dsdpsxt N Izefx Ac Noun CNC-controlled steady rest TURBO separator (filter system)

Year of construction: 2021, operating hours: 100 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN:40231, This Formech RP700 is a robust and easy-to-use machine from a leader in vacuum forming technology. It has seen very light use (less than 100 hours) and is perfect for high-volume processing of plastic trays and parts. The machine uses a cutting die to deliver clean, consistent results. It is currently ready to run and can be picked up or palletized for shipping. Dujdpfxjyb Th Ns Ac Nsn Key Features & Capabilities: Applications: Ideal for die-cutting blister packs, clam packs, and thin materials. Capacity: Handles materials up to approximately 2 mm in thickness. Sizing: Features a 700 mm (28") cutting width and a maximum roller opening of 180 mm. Power: Requires a 3-phase power supply (380V/32A). Working Width: 700 mm (28"). Adjustable Height: 25 mm to 180 mm. Machine Footprint: 1050 mm x 2815 mm. Weight: 350 kg (770 lbs). Please get in touch with any questions regarding machine capabilities or material limitations!

Condition: excellent (used), WNT tool holder SK40 Ø8x80, HSC version with G2.5 balancing up to 25,000 rpm. Professional solution for HPC/HSC machining on CNC centers. Complete with a solid carbide end mill VHM (fine-pitch, multi-flute) – ready-to-use set. Very good condition, premium class equipment. Dedjw Rrv Ropfx Ac Noun

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Duedpexdh Hqofx Ac Nsn Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: excellent (used), For sale: Professional tool holder SK40-12×50-K, compliant with DIN 69871 AD/B. Each holder is fitted with a mounted end mill (visible in the photos). Mounting type: SK40 Sleeve: Ø12 mm Grip length: 50 mm Standard: DIN 69871 AD/B Condition: used, fully functional, ready for operation Please note that several units are available, all in the same Ø12×50 size. Dedpfxoxcg H Hs Ac Nsun

Condition: excellent (used), For sale: complete GARANT SK40-10-50 tool holders equipped with VHM solid carbide end mills. Products from the renowned Hoffmann Group Germany, ready for immediate use on CNC machining centers. • Clamping type: SK40 (DIN 69871) • Bore size: Ø10 mm • Length: 50 mm • Catalogue no: 300100.10 • Balancing: G2.5 up to 25,000 rpm • Set includes: VHM solid carbide end mills Ø10 (various types – visible in the photos) • Ideal for machining steel, stainless steel, cast iron, and metal alloys • Very good condition – tested and ready for use GARANT tool holders ensure top-quality clamping and machining precision at high spindle speeds. -- PRICE IS PER PIECE -- Dodpfxow Sy Ahe Ac Nsun

Condition: excellent (used), Collet chuck from the renowned brand GARANT (Hoffmann Group) – guaranteed top quality and reliability in CNC machining. Model SK40-12-50, catalogue number 300100 12. • SK40 taper – industry standard for machining centres • Clamping diameter Ø12 mm • Chuck length 50 mm • Max. RPM 25,000 • High precision and dynamic balancing • Supplied with a mounted end mill. Very good condition, ready for immediate use. Professional tool for CNC milling machines, ideal for workshops that value quality and reliability. Dsdpfx Acjw Sy Ano Neun -- PRICE LISTED IS FOR 1 PIECE --