Used Screw Compactor for sale (5,763)

Condition: good (used), functionality: fully functional, Description: Rotary screw compressor ZR 4-52 Characteristics: Iedpsvyrbnefx Apcjbb Capacity 8.00 bar Power 250 kW Voltage 500 V Air flow rate l/min 634 Running hours at last maintenance: 57287

Condition: ready for operation (used), A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible. Iedpfxewk Nk Ts Apcsbb

Condition: used, volume flow: 820 m³/h, pressure (max.): 10 bar, High-quality oil-lubricated screw compressor. It features a direct drive, which is the most efficient type of drive. Manufacturer: AIRPOL Model: NB 90 Capacity: 820 m3/h Maximum pressure: 1.0 MPa Motor power: 90 kW / 160 A (SCHORCH) Ijdpezt Ahbsfx Apcjbb Screw element: GHH RAND, TYPE: CF128G (INGERSOLL) Operating hours under load: 27,062 h Weight: 1850 kg Year of manufacture: 2007 Complete DTR documentation and UDT inspection logbook with tank passport. Includes new air and oil filters. Technical condition: used machine.

Condition: good (used), functionality: fully functional, power: 250 kW (339.91 HP), Description: Screw compressor ZR 4-52 with drum dryer Characteristics: Capacity 8.00 bar Power 250 kW Isdevyrlaspfx Apcobb Voltage 500 V Air flow rate l/min 634 Running hours at last maintenance: 50307

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,160 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Table length: 1,320 mm Table width: 610 mm Accuracy: ±0.01 mm Iedpfx Aszzx Hispcsbb Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Spindle speed: max. 12,000 RPM MACHINE DETAILS Control system model: Siemens Sinumerik 840D Input voltage: 400 V Weight: 7,000 kg EQUIPMENT Chip conveyor Documentation Oil mist separator Note: The machine has undergone regular electronic and mechanical maintenance. New ball screws were installed approximately 1 year ago.

Condition: good (used), Year of construction: 1995, Gebr. Kaeser screw compressor SK 19 Ibedpfx Apszrhrvocsb Motor power: 11 kW Year of manufacture: 1995 Permissible operating overpressure: 10 bar Air delivery rate: 1900 liters/min with Kaeser control relay Dimensions approx. L 785 x W 820 x H 1017 mm (dimensions without connections). Weight: 270 kg Location: available from warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2008, operating hours: 21,000 h, Screw compressor, Kaeser, Aircenter SX 6, compact all-in-one solution – used: Price ex works: €5,950.00 (net)! Iedpfx Apszbyc Hocobb Manufacturer: Kaeser Type: Aircenter SX 6 Year of manufacture: 2008 Serial number: 1008 Rated power: 4.0 kW Motor speed: 2,910 rpm Max. operating pressure: 8.0 bar Ambient temperature: 3°C / 45°C Compressed air tank: 200 L Sound pressure level: Total weight: approx. 290 kg Dimensions (W x D x H): Width (mm): 590 Depth (mm): 1090 Height (mm): 1560 Options: K1 (refrigerant dryer) / T2 (voltage supply/transformer) Operating hours: approx. 20,210 h (as of April 21, 2026) Condition: good Available: from approx. August 2026 Location: Leipzig

Condition: excellent (used), Year of construction: 2013, PROD. KAESER Ijdezu Inpspfx Apcsbb TYPE DSD202SFC S/N 1937 YEAR 2013 POWER (kW) 110 CAPACITY (m3/min) 4-17.3 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER yes COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTIONS 2 NEW/USED USED

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey Ibedpfx Apjxc T Evecjb - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: used, Year of construction: 2005, operating hours: 11,100 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 530, table load: 300 kg, rotary table diameter: 630 mm, overall weight: 4,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, The machine is still in operation and can be tested while powered. Available from approximately December 2026. At approximately 10,000 spindle operating hours, the spindle was re-bearinged, and the ball screws in the X, Y, and Z axes were replaced. Includes Heidenhain probe. Tool holder: SK 40. Iedpfxsz Damts Apcsbb The zero-point clamping plate shown on the table will be removed and is not included in the sale.

Condition: excellent (used), Year of construction: 2017, operating hours: 28,625 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 990 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Premium screw compressor Atlas Copco GA90+. 90 kW, 8.5 bar with 16.50 m3/min. Only 28,625 operating hours. Ijdpjuqanasfx Apcjbb With heat recovery, new compressor oil and new oil filters.

Condition: excellent (used), Year of construction: 2017, operating hours: 36,000 h, functionality: fully functional, overall weight: 1,890 kg, total length: 2,200 mm, total width: 1,420 mm, total height: 2,050 mm, motor manufacturer: Garden Denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, type of cooling: water, Equipment: type plate available, Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Pressure 10 bar Ibodpfxew Rcgtj Apcob Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 phase current consumption: 128 A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2011, operating hours: 53,132 h, functionality: fully functional, Screw compressor GA132VSD Atlas Copco Iodpox Rwz Tjfx Apcebb Integrated frequency converter 132 kW 8.5 bar 26.06 m³/min

Condition: excellent (used), Year of construction: 2015, operating hours: 22,905 h, functionality: fully functional, machine/vehicle number: API173336, overall weight: 1,500 kg, power: 90 kW (122.37 HP), volume flow: 15.78 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: refrigerant dryer, We are selling a CECCATO DRE 120 compressor station (90 kW, 10 bar), including accessories: raw compressed air filter (M022FWF), fine compressed air filter (MO22SWF), MO22AWM carbon filter, RA 1080 compressed air condensation dryer. At the moment 22905 WORKING HOURS . Regularly serviced compresor from 2015. Dryer and filters new in 2022. We are seling for 20 000 EUR Loadet, EXELLENT CONDITION LOCATION CZECH REPUBLIC , 78701 SUMPERK Isdeynubdopfx Apcobb

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press Ibsdeyzr Nmspfx Apceb • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2026, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory value-added tax, ex works, and excludes packaging. Ibjdpfxozv S E Ue Apceb The baler has been cleaned, function-tested, repaired, and equipped with a new control system in accordance with EN16500. All replacement parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale size (L x W x H): 1180 x 700 x 800 mm External dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales / hour Number of bale tie channels: 4 Binding material: Wire Weight of the baler: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors under cover Includes starter kit with bale tie wire, 19mm Serial number: 610.00.117 Year of manufacture: 2003

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,265 h, clamping force: 1,600 kN, screw diameter: 35 mm, overall weight: 8,700 kg, controller manufacturer: ENGEL, controller model: CC200, Hydraulic injection moulding machine manufactured in 2013. This Engel Victory 500/160 tech features a clamping force of 1600 kN and an injection unit of 500. It includes a patented tiebarless clamping system and a highly abrasion-resistant cylinder. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 500/160 tech machine we have for sale. Contact us for further details. • Injection unit: 500 • L/D ratio: 20 Iodpez Dgvzjfx Apcsbb • Hydraulics: ECODRIVE SHV1 (high-dynamic servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 102 kW • Clamping system: Patented tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm • Ejector: Central ejector • Hydraulic core pulls: 2 on moving platen • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 8 control zones • Cylinder/screw execution: M3 abrasion/corrosion-resistant cylinder (up to 350 °C), hardened screw S8 (Ø 35 mm, L/D 20), non-return valve R9b • Open nozzle: Flange thread M28 x 1.5, radius 15 mm, bore 4 mm • Mold temperature control: Flow regulator 0–10 l/min with 12 circuits (2 x 6 circuits) • Hydraulic tank capacity: Main approx. 330 l; suction approx. 130 l • Interfaces: Coloring device interface; RS-485 for temperature control units; Euromap 67 / AN-146 robot interface; interface for Priamus PDDI 8903D1 and 8903E2 • Languages: Czech and German

Condition: excellent (used), Year of construction: 2014, S016896 PROD. ATLAS COPCO TYPE GA75VSDFF S/N API668061 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 15.09 DISCHARGE PRESSURE (bar) 12.75 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER yes, R410a 1.1kg Ibedpfx Aezi Dbhepcjb HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: excellent (used), Year of construction: 2001, PROD. ATLASCOPCO TYPE GA160 S/N AIF072890 YEAR 2001 POWER (kW) 167 CAPACITY (m3/min) 21 PRESSURE (bar) 8.5 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Ijdozq Afujpfx Apcsbb CONNECTIONS 3 NEW/USED USED

Condition: used, Year of construction: 1991, machine/vehicle number: 336.533, set for 31,5 x 24 caps. 3 capping heads Isdpfx Apsz Aixlecobb

Condition: excellent (used), functionality: fully functional, ALEXANDERWERK SFS 250 | Inclined screw conveyor / screw feeder Manufacturer: Alexanderwerk GmbH Model / Type: SFS 250 Iedpfxezxudxs Apcjbb Serial number: 05118426 Power supply: 400 V (3-phase) Screw diameter: 250 mm Feeding / discharge height: 1270 mm Overall dimensions: 2320 x 710 x 1800 mm Weight: approx. 180 kg The ALEXANDERWERK SFS 250 is a professional, inclined screw conveyor (screw feeder) designed for continuous and hygienic transport of bulk, granular materials, meat mixtures, fillings, and shredded products in food processing, meat processing, bakery, fruit and vegetable processing, as well as chemical and pharmaceutical industries. The device enables efficient, inclined transport of material from a loading hopper to a discharge height of up to 1270 mm. The 250 mm diameter of the trough and screw guarantees high throughput and smooth material flow without the risk of blockages. The feeder is ideal for use in combination with grinders, mixers, cutters, stuffers, cooking kettles, or conveying and packaging lines, automating the filling process and minimizing the need for manual material handling.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 5001328, power: 45 kW (61.18 HP), operating pressure: 10 bar, The comnpressor is refurbished & serviced. the airend after overhaull has 10 hours of working. Iedpfey R Sywox Apcjbb

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, Equipment: documentation/manual, ARBURG Allrounder 2000 T 2000-800 Stock No.: 503617 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of Manufacture: 2019 Operating Hours: 8250 h Technical Data, Clamping Unit Clamping Force: 2000 kN Platen Size H x V: 1772 x 800 mm Minimum Mold Height: 400 mm Maximum Platen Distance: 900 mm Opening Stroke: 500 mm Rotary Table Diameter: 2000 mm Ejector Stroke: 175 mm Ejector Force: 45 kN Mold Weight: 6000 kg Technical Data, Injection Unit Ijdpfxjz A Tdpo Apcobb Screw Diameter: 50 mm Injection Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Screw Torque: 880 N Number of Heating Zones: 8 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 4.11m x 2.65m x 4.81m Total Weight: 22000KG Equipment Screen text in German Screen text in English CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary table Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: new, Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Horizontal baling press Presto CC 40 M, year of manufacture 2017, semi-automatic Technical data: Manufacturer: Presto Type: CC 40 M Year of manufacture: 2017 Operating hours: 1640 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Tying: 4-strand, polyester strapping, manual Throughput at a bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (L x W x H) Machine weight: approx. 3800 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. Note: Channel outlet with fully automatic control. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is reserved, and can be withdrawn at any time. Inspections are possible by appointment. The sale is made against prepayment, ex works, without any warranty. Ijdpfx Apjz A T Uzscjbb

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, overall weight: 410 kg, total length: 2,000 mm, total width: 1,000 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 0.6 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: refrigerant dryer, New screw compressor for sale, available from stock. First-time commissioning has been completed. Simply plug it in and get started... Technical data: Drive power: 5.5 kW (also available with 4.0 kW) Iodozt Nrtopfx Apcobb Controlled by a frequency converter (no high inrush current) Tank volume: 300 l Maximum pressure: 10 bar With refrigerant dryer 3-stage filter unit Automatic condensate drain Quiet operation thanks to sound insulation 1 year warranty 4250 CHF including VAT Feel free to come by for a viewing. Also, check out my other listings.