Screw conveyor

Förderschnecke 8m

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers - container for liquid extracts, etc. Kodpfelxzl Eex Afgelt

Year of construction: 2021, condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Kjdpsh Eld Esfx Afgolt Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/8 Belt width: 500 mm Kljdpfx Aexk Tg Njfgjt Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Suitable for the following bulk materials, among others: Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: like new (used), Year of construction: 2008, operating hours: 8,348 h, functionality: fully functional, machine/vehicle number: 2887, pressure: 8.5 bar, power: 2.276 kW (3.09 HP), operating pressure: 8 bar, temperature: 176 °C, total height: 2,950 mm, total length: 5,100 mm, nominal heat output: 2.276 kW (3.09 HP), total width: 2,400 mm, empty load weight: 6,500 kg, Equipment: CE marking, ATTSU RL3000/8 steam generator on sale. The steam generator is in very good conditions and has a low mileage of 8348 operating hours. The generator was used in a factory of pickled vegetables which stopped activity. The boiler has been kept preserved ever since. The boiler includes a fuel oil burner (optional), but can be fired with gas. An inspection on the boiler was performed in June 2025 by a boiler specialist which include thickness measurements and pressure test. The test results were favourable. Boiler Datasheet Manufacturer: ATTSU Model: RL 3000/8 (tube fired) Burner: Fuel oil Serial Number: 2887 Steam Production: 3000 kg/h of saturated steam Rated Pressure: 8.3 bar Klsdswxd Atopfx Afgst Test Pressure: 12.5 bar Volume: 3125 liters Year of Manufacture: 2008

Condition: excellent (used), Year of construction: 2010, power: 600 kW (815.77 HP), 1 burnt Weishaupt oil burner ----- Type : WM-L20 / 2-A Version : R Nox class : 2 Output : 600 - 2.100 kW Oil throughput : 50 - 176 kg/h Year of construction : 2010 with WFM 100 Kedpouugwcsfx Afgjlt

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. Kedpfofu Ivzsx Afgelt • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 15 h, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 130 kW (176.75 HP), fork length: 1,200 mm, empty load weight: 21,810 kg, total length: 7,820 mm, drive type: Diesel, construction width: 2,490 mm, Rotating telehandler Load center: 600 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire size: 445 65 R22.5 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 445 65 R22.5 Rear tire condition: 80 - 100% Kodpfsxya H Ujx Afgjlt Third control valve, heating, full cabin, air conditioning, Remote control, work platform pre-installation, free return flow

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication Kjdswvqklopfx Afgjlt • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: refurbished (used), functionality: fully functional, Vibro screen type HVSM 1000x3500 generally reconditioned (workshop refurbished) with new bearing (spherical roller bearing) and new oscillating elements Make: HAAS Year of manufacture: 1996 Condition: good ( reconditioned) Channel width: approx. 1000 mm Channel length: approx. 3500 mm Gutter height: approx. 150 mm Wall thickness: approx. 5 mm Discharge height: approx. 150 mm Total height: approx. 300 mm Screening capacity: approx. 10 m³/h (for wood chips and sawdust) Fractions: 2 Screen area: approx. 2.2 m² per screen mesh size Screen decks: 1 piece (screen zone D = 10 mm, L = 2,200 mm) Drive power: approx. 4.0 kW Weight: approx. 800 kg Machine colour: RAL 6011 Reseda green without electrical installation Kljdpfswqx Hkox Afgst Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - waste wood - bark Screening machine | vibrating screen | vibro screen | vibro screening machine | vibrating screen | wood chip screen | screening machine for wood chips | screening machine for cogeneration plant

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Klsdpfx Aot S Sxgofgst Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Drive via geared motor