Used Scm Ti for sale (614)

Condition: excellent (used), SCM M2 Multirip Saw Track width: 220 mm Dcodeydh A Hopfx Ac Nsc Maximum distance between outer saw blades: 200 mm Cutting height: 120 mm Saw blade bore diameter: 70 mm Maximum saw blade size: 350 mm Feed adjustable via variator Feed speed adjustable from 6-48 m/min Anti-kickback pawls Central track lubrication Machine weight: 1450 kg

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Djdpfx Acoxy Tmno Njcc

Condition: good (used), Code: 0277 Brand: SCM Model: S 520 - CE Standard Automatic thickness planer for wood, carpentry shops, custom-made furniture, furniture factories, sawmills, woodworking shops, wood window frames, shipyards, plastics, composite materials and various - CE Standard Dsdpjx Ivfrefx Ac Njcc Technical data: TERSA shaft with 4 knives Working width mm 520 Max working height mm 250 Min working height 3 mm Min working length 210 mm Automatic table lifting Feed speed 5-8-12-18 mt/min Motor Hp 5,5 Suction inlet diameter 150 mm Overall dimensions mm 1050 x 1000 x 1050 h Weight kg 650

Condition: used, Year of construction: 2012, Available upon agreement Machine Design: Gantry-type stationary machine Machining size in X-direction: 3548 mm Machining size in Y-direction: 1350 mm Machining thickness (Z-axis): 160 mm Number of main spindles: 1 unit Main spindle power: 11 kW Main spindle speed: 1,200–20,000 rpm Clamping system: HSK-63 F Spindle cooling: liquid cooling Number of axes: 5 Dcsdpfx Aoygm Dhjc Nsc Tool changer: disc type Tool changer positions: 12 units Rear wall slotting unit: Yes Vertical drilling spindles - X-direction: 10 units Vertical drilling spindles - Y-direction: 8 units Vertical drilling spindle speed: 6,000 rpm Horizontal drilling spindles in X-direction: 2+2 units Horizontal drilling spindles in Y-direction: 2+2 units Horizontal drilling spindle speed: 6,000 rpm Control type: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Xilog DXF interface: Yes CD-ROM drive: Yes Table design: console table, tubeless Positioning system: cylinder stops for veneer Support arms: 6 units Suction cups: 18 units Traversing rails: 4 units Number of vacuum pumps: 1 unit Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety fence left: Yes Safety fence right: Yes Safety fence rear: Yes Extraction hood: axis-controlled Setup assistance: laser point positioning aid Safety features: bumper Central lubrication: automatic Tools: available at extra cost Approx. weight: 6,500 kg Extraction diameter: 200 mm Further descriptions and images available upon request Location:

Condition: like new (used), Year of construction: 2023, Edgebanding Machine SCM Model: olympic 500 HP 'T-ER2' Type of Offer: Lease return, used machine Availability: Immediate Location: In stock Condition: As new Year of Manufacture: 2023 GENERAL DESCRIPTION: A complete and versatile edgebanding machine for small and medium-sized companies, capable of processing a wide range of materials to a high standard of quality in a compact footprint. Djdpfx Aeq A Tyzoc Nscc The SCM Olympic 500 features an electronic setting device and allows processing of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with 'Maestro active edge' HMI software • Maestro connect: prepared for later installation without gateway • 2-radius processing, chamfering on all units with multi-edge tooling - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm • Electronic positioning of the pressure beam OPTIONAL MACHINE EQUIPMENT: Workpiece spacer at infeed KIT "SAV€NERGY" Internal lighting for the enclosure and gluing area “Nesting” sensor roller kit Release agent spray unit “AAR” Edge finishing spray unit Spray unit for sensitive edges Jointing cutter unit "RT-V1" “EASY SIZE” device – electronic quick adjustment of the jointing cutter unit Glue unit "VC-VM" SGP glue pot for EVA & PU incl. quick-change system Ceramic infrared preheating lamp for workpieces Electronic positioning of all pressure rollers End trimming unit "K-2 Radius" Chamfer and radius milling unit "R-HP Multiedge 2R" Corner rounding unit "Round 2-A Multiedge 1R" KIT 'MULTIEDGE 3' – automatic position change straight/ R/R, for "Round 2-A Multiedge 1R" unit Radius scraper unit "RAS-HP Multiedge 2R" Flat scraper unit "RC-N" Buffing unit "SP-V" MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE – LEASE RETURN!!

Condition: new, Year of construction: 2024, functionality: fully functional, Powerful and versatile panel saw packed with extra features Sliding table with 10-year warranty! - Anodized aluminum sliding table, running on hardened steel guides. - Crosscut frame complete with mobile aluminum fence for fast, precise positioning for angle cuts. - Extended outfeed table - Emergency stop push button on the front of the machine and on the side of the parallel fence. - Overload relay - Overhead saw guard with integrated dust extraction Ø 80 mm - Automatic brake on the main blade - Lockable main switch for the control circuit (110 V) - Manual right-hand side guide with position reading via metric scale, running on Ø 40 mm steel tube, and with micrometric adjustment. - Cutting capacity against parallel fence 1270 mm. Direct start of main motor - Three speeds for main blade - Scoring unit with independent motor and external setup and stop for quick repositioning of the scoring blade. The machine is compliant with CE standards. Additional features: - CompeX for angle cuts, integrated into the extension table, for quick conversion to angled cutting - Start/Stop switch on the end of the sliding table Djdpfx Aoyglr Dec Necc - Eccentric clamp - Crosscut fence with 2 LCD stops - 3rd LCD stop for crosscut fence

Condition: new, Year of construction: 2024, functionality: fully functional, SCM Panel Saw, SI 400 EP NOVA with tilting blade and sliding table - “READY” electronic control with 2 controlled axes Specification: - Lifting and tilting of the saw unit - Automatic height adjustment according to tilt angle - Manual, semi-automatic, and automatic with memory - Up to 99 programs - Calculator and hour meter - Tool data setting Optional equipment: - CompeX for mitre cuts, integrated in the sliding table for quick changeover to mitre cuts Djdjygll Repfx Ac Nscc - Start/Stop switch at the end of the sliding table - Eccentric clamp - Crosscut fence with 2 LCD stops - 3rd LCD stop for crosscut fence

Condition: used, Saw blade diameter: max. 400 mm Dsdjyc Rtrepfx Ac Necc Cutting length: max. 3,200 mm Tilting: 45° Scoring unit: Yes SCM format panel saw type SI 3200 N for precise longitudinal, cross, and angled cuts in solid wood, board materials, and laminated materials. The machine features a robust format sliding table, high repeat accuracy, and sturdy industrial construction with electronic adjustment and scoring unit. Ideal for carpentry workshops, joineries, and furniture manufacturing.

Condition: used, Year of construction: 1993, Used window production line, primarily utilized for historical window manufacturing (mostly Alt Wien profile). Sold as seen. Further information and price on request, EXW. Dcjdpfxeygh H Dj Ac Noc

Condition: good (used), Year of construction: 2015, functionality: fully functional, edge thickness (max.): 12 mm, ENGLISH: Heavy duty edgebander OLIMPIC (SCM Group) in rich configuration suitable for custom made and series production. Machine is equipped with aggregates with servomotors (ABS R1+R2mm + thin edge + solidwood). Model: Olimpic K800 TERL Manufacturer: SCM Group Production year: 2015 State: good Edgebanded edges: 238.800 meters Main technical parameters: - feeding speed: 12/18 m/min. (including rounding) - panel thickness: 10-60 mm (including rounding) Equipment and configuration of the machine: - control panel with LCD touch screen STARTOUCH - internal lightning of working area - automatic lubrication of the feeding chain - electronic top pressure adjustment - glue pot with quick change of the glue color Working units: - antiadhesiv spray - pre-milling unit (2x DIA cutter) Dsdpfowxt Tbsx Ac Nocc - glue pot with roller "VC/1000" (glue pot with quick-release system) - pressure rollers (4 pcs) with timed intervention - 2 motor end cutting unit "K/SEL" with pneumatic tilting of the blades - radius trimming unit "RI/800" R1mm + thin edges + solid wood (12mm) (3 position pneumatic kit) - 2 motor rounding unit "ROUND K MULTI EDGE" R2mm + thin edge (each motor has: 2 electronic axis with servomotor) - radius edge scrapers "RAS/S 2P" MULTI-EDGE R1+R2mm (each unit has: 2 electronic axis with servomotor) - cleaning spray - glue scrapers "RCA/2C" - brushes"SP/F"

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Dedpjt R T Hcofx Ac Nocc Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, grinding belt length: 2,150 mm, input current: 39 A, Wide belt sander SCM suitable for calibration/sanding of solid wood, veneer and lacquer base. Model: Sandya 600 RCS Working width: 1.100 mm Working thickness: 4-170 mm Main motor: 15 kW (invertor) Abbrasive belts speed: 3-16 m/s (inverter) Feeding speed: 3-18 m/min (inverter) Abbrasive belts length: 2.150 mm Aggregates: 1. Steel calibrating roller R (diam. 140 mm) 2. Combinated unit CS: - rubber coated roller (diam. 160 mm, hardness 30Sh) - elektronic sectional pad (segments width 30 mm) 3. Sanding brush ScotchBrite (diam. 150 mm) Other equipment: - 5 idle supporting rollers at infeed - 5 supporting rollersat outfeed (1st roller motorized) - version C-Plus - pneumatic exclusion of the 1st roller - pneumatic exclusion of the 2nd roller and the pad - electronic programmator LOGIC TS with LCD touch screen 10,4" - motorized height adjustment Stat of the machine: very good Production year: 2016 Weight: 1.400 kg Dcsdpjygddljfx Ac Nsc El. power: In=39A Machine availability: cca April 2026

Condition: new, Year of construction: 2023, functionality: fully functional, DMC SD 30 RCS 110 - Automatic Wide Belt Sander New ex-demo machine, under warranty, has not been used, unpacked from foil Technical Specifications: - Working width: 1,100 mm Dodsw Rpf Nepfx Ac Nscc - Min./max. working thickness: 4/170 mm - Abrasive belt width: 1,115 mm - Abrasive belt length: 1,900 mm Configuration: - Equipped with 1 "R" unit (roller) and 2nd combined "CS" unit (roller/pad) - "C" version for RCS 110: • Pneumatic actuator activating the roller of the first "R" unit • Pneumatic actuator activating the roller of the second "CS" unit • MESAR electronic segmented pad with 20 sections • Electronic adjustment of the worktable height - Compliant with European safety regulations (CE standards) - R120/ steel calibration roller, 120 mm diameter, in first position - R140/65 – 65 Sh rubber grooved roller, 140 mm diameter, in second position - Electronic ammeter for the main motor to monitor power consumption - Electronic display of working thickness - Electronic oscillation of abrasive belts - Rubber pressure rollers - Vertical infeed roller on the first unit to prevent sudden ejection of workpieces - 60 Sh rubber feed belt - Infeed and outfeed support rollers (2 rollers each) - Automatic device for centering and tensioning of feed belt - Main motor power: 11 kW (2 speeds) - Oscillating nozzle system for blowing dust from the abrasive belts of the first and second unit with timer control - Variable feed belt speed via inverter: 0.75 kW (3.5–18 m/min) - “EYE-S” electronic programmer for machines with electronic segmented pads • 10'' touchscreen display

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Dcedpsw Dcccofx Ac Noc

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Djdpfsw Dcb Sox Ac Nocc

Condition: used, Year of construction: 2022, Sliding table: 3200 mm, cutting width: 1000 mm, CNC parallel fence, scoring unit, angle stop with digital display, electro-motorically tiltable and height adjustable, control panel at eye level. Storage location: Nattheim. Dcjdpexqtvqsfx Ac Njc

Condition: reconditioned (used), Year of construction: 2000, SCM Sintex XL Tersa planer heads Dcsdpfxoygci Ts Ac Noc Planing width: 180 mm Planing height: 105 mm Number of spindles: 4 Motor power right and left spindle: 7.5 kW Motor power top and bottom: 7.5 kW Feed speeds: 6/12 rpm Extraction port diameter: 150 mm, 2 x 120 mm Dimensions (LxWxH): 2,700 x 1,000 x 1,700 mm Weight: 885 kg

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Dcedsxw N N Hjpfx Ac Noc Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2018, SCM Wide Belt Sander dmc sd 60 DMC60 RCS 110 AB /00003689 European safety regulations (CE marking) Voltage 400 V EU Frequency 50 Hz Djdsx Nrwmepfx Ac Nocc Sanding width: 1100 mm Version "B" for RCS Infeed and outfeed roller table for long workpieces Electronic programming unit "LOGIC SC" "RA" obliquely ribbed steel contact roller – 1st unit 2nd unit sanding pad unit Main motor 15 kW (20 HP) Location: at customer site - immediately available -

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Djdpfxjxw N Sbs Ac Necc Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: 008288, Position 1: Panel Feeding and Loading SCM-MAHROS - STEFANI - CELASCHI Position 2: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 3: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 4: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Dcedpfx Aex Nv S Uoc Nec Position 5: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 6: Splitters SCM-MAHROS - STEFANI - CELASCHI Position 7: Panel Stacking and Offloading SCM-MAHROS - STEFANI - CELASCHI

Condition: used, machine/vehicle number: 007113, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 22 m/min Djdorl Ur Tspfx Ac Njcc Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, Year of construction: 2018, Price: On request CNC machining centre SCM ACCORD 25 FX Brand SCM Type ACCORD 25 FX  Year of construction 2018 Machine no. AA10000992 Machining table dimensions 5020x1380 mm (LxW) Worktable equipped with 2 vacuum fields Worktable equipped with 2 reference lugs Including 8 reference lugs and 8 supports  Speed XY, vector 35 m/min Movement axes Maximal speed X axis 25 m/min (pro space) Maximum speed X axis 90 m/min (pro speed) Maximum speed Y axis 90 m/min Maximum speed Z-axis 30 m/min Control unit Machine control KVARA control Windows Embedded Standard 7-64bit Hard disk storage capacity 500GB-7200rpm Microprocessor Intel Pentium-2.9GHz RAM memory 8GB-DDR4 XILOG-MAESTRO software package Dcodpsycwupofx Ac Nsc Including vacuum pump  Motor power 5.5 kW Pump capacity 250m3/hour Vacuum pressure maximum 0.9 bar Total dimensions 9000x4500x3000 (LxWxH) Total weight 7,500 KG.  - Year: 2018 - Documentation available: No - CE certificate present: No - Serial number: AA10000992 - Type milling table: Beam table - Vacuum pump present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2011, total length: 4,000 mm, total height: 1,600 mm, total width: 970 mm, Weight: 1.300 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/115214 - Number of units [pcs]: 6 - Max. edge band thickness [mm]: 6 Dcjdpfswnickox Ac Nsc - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Current consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), SCM F520 CE leveling machine Working width 520mm 4kw motor 4 knife shaft Traditional knives Hydraulic lifting and lowering of the work surface Main fence adjustable up to 45 Tops length 3000mm CE certificate Dcedsndhdtepfx Ac Noc