Used Scm Si 16 for sale (587)

Condition: used, Year of construction: 1999, Table dimensions 1200x730 mm Motor output 5,5 kW Spindle diameter 30 mm Rcjdpfx Aexq Hiwjgweh reus 3000-4500-6000-7000-10000 U/min Weight 810 kg

Condition: excellent (used), Catalogue number 7211 TECHNICAL DATA JOINTER: - shaft width: 400 mm - 3-knife cutter block - table length: 2000 mm - fence THICKNESSER: - max workpiece thickness: 140 mm - thicknesser shaft guard from above: – anti-kickback fingers – grooved feed roller – cutter block – smooth outfeed roller DRILLING MACHINE: - max tool diameter: 16 mm - max drilling depth: 170 mm - max drilling width: 200 mm - adjustable table (up/down, forward/backward, sideways) - table dimensions: 560 x 270 mm - material hold-down CIRCULAR SAW: - max blade diameter: 300 mm - max cutting height: 80 mm - blade arbor diameter: 30 mm Redpoqwy Dtjfx Agwsch - blade adjustable up/down - cutting width with fence: 120 mm - table dimensions: 1010 x 550 mm - with table-mounted sliding carriage - motor: 2.2 kW - dimensions (L/W/H): 2000 x 2340 x 1200 mm - weight: 895 kg ADVANTAGES – Made in Italy – Very good condition – Used multifunctional machine Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (price is subject to change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Rcsdsxq Apgepfx Agwsh

Condition: excellent (used), SCM T130 spindle moulder (bottom spindle) 4-roller power feed Haffner Interchangeable spindle Ø30 mm Motor 5.5 kW 5 spindle speeds Rcedpoxr Upzefx Agwoh Brake Reverse/forward rotation Machine in very good condition.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AE00000087, Brand and Model: SCM ACTION P Year of Manufacture: 2018 Condition: Lightly used, excellent condition Location: Croatia Key Technical Specifications: - Type: Automatic cabinet clamp with “comb” pressing system - Vertical and horizontal automatic clamping - Brushless motors: 2 kW (vertical), 1.5 kW (horizontal) - Positioning speed: up to 160 mm/s - Max pressing force: 1400 kg (vertical), 1600 kg (horizontal) - Working area: up to 2500 mm length, 1300 mm height, 800 mm depth - Installed power: 4 kW / 15 A - Weight: approx. 1800 kg - Machine dimensions: 4200 × 1200 × 2250 mm - Safety: Safety photocells on both sides Functionality: - Manual loading and unloading - Ideal for quick cabinet assembly in kitchens, bathrooms, and offices Price: €16,500 + VAT Notes: - The machine is in excellent working order and was lightly used Redpfexr T N Tsx Agwjch - Perfect for manufacturers looking to optimize cabinet assembly - Available immediately For more information, pictures or viewing appointment – feel free to contact us.

Condition: excellent (used), Four-side planer SCM Compact 23 Working width: 230 mm Working height: 120 mm Number of spindles: 4 Spindle arrangement: Bottom Right Left Top Spindle speed: 6000 rpm Rcedpfxjxqma As Agwjh Two feed speeds: 6–12 m/min Adjustable spindles

Condition: used, Year of construction: 2007, max. workpiece length 3200 mm Max. mould width 200 mm cut-off saw 4 KW Rcedpfx Ajxq Hidogwjh 130 mm

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb Rsdpfx Agjuwp Ecswoch - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm - cast iron tables - both tables adjustable - original cast iron tiltable fence - brake - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations)

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Rcjdpow Dcccjfx Agweh

Condition: used, Year of construction: 1994, functionality: fully functional, Planing width 630 mm Redpfxjxr Ikrj Agwjch Electric thickness table adjustment with fine adjustment

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Rcsdpfsxqggcjx Agweh Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: good (used), Multiblade saw SCM M3 Maximum cutting height: 100 mm Conveyor belt width: 300 mm Minimum cutting length: 390 mm Drive motor: 18.5 kW with laser unit Rcedpfx Ajxrtq Dsgwjh Weight: approx. 1,800 kg Location: Austria, Ried im Innkreis

Condition: good (used), Year of construction: 2011, For sale is a first-hand used SMC edge banding machine in good condition. Manufacturer: SMC Year of manufacture: 2011 Type: Olimpic S 2000 "Model A" Rjdpfx Aehf Aclegwech Weight 2000 kg Feed rate: 12-18m/min Working height (panel thickness): 8-60mm Edge thickness: 0.4mm - 6mm - Flush trimming unit - Snipping unit - Surface scraper - Rounding unit all data without guarantee, sale only to commercial customers. Inspection by appointment in Karlovarská 1415, 363 01 Ostrov, Czech Republic Collection in Ostrov (Czech Republic) or in 94424 Arnstorf (Germany)

Condition: excellent (used), Catalogue Number 7780 TECHNICAL DATA SURFACE PLANER: - shaft width: 410 mm - 3-knife shaft - adjustable, tilting fence - table length: 2,060 mm - both tables adjustable THICKNESSER: - max thickness of workpiece in thicknesser: 200 mm - thicknesser shaft guard - from above: Rodpfx Agexqyqhowech - anti-kickback fingers - toothed, driven, swivelling infeed roller - planing shaft - smooth, driven outfeed roller - 2 adjustable rollers in lower table - main motor: 3 kW - 2 feed speeds - dimensions (L/W/H): 2,190 x 800 x 970 mm - weight: 900 kg ADVANTAGES – Italian manufacture – very good condition – used surface planer-thicknesser Net price: 14,900 PLN Net price: 3,550 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Rodpfx Agsw Dcb Sswjch

Condition: excellent (used), functionality: fully functional, SCM T120C Spindle Moulder with Sliding Table Specification: • Condition: Used, fully serviced • Manufacturer: SCM • Model: T120C • Spindle diameter: 35 mm (option to change to 30 mm – extra cost PLN 1,500) • Motor power: 4 kW • Star-delta motor starting • Left/right spindle rotation • 4 belt-driven speeds: 2,900/4,400/6,000/7,200 rpm • Manual up/down adjustment Redpfx Agowthmxjwjch • Foot brake and foot spindle lock • Longitudinal sliding table, suitable for tenoning, length: 105 cm • Original paintwork • Overall dimensions: 100 x 110 x 110 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Photos illustrate the actual condition of the machine • Possibility to test the machine on-site.

Condition: excellent (used), functionality: fully functional, SURFACE PLANER machines . different models second hand machines Rcedpfswt T Hdjx Agweh n.4 knives volt. 380/50

Condition: used, Year of construction: 2009, Used SCM edgebander model OLIMPIC K1000 Control panel with membrane keyboard Rcodpfx Aoxrndxsgwoh Technical data: Min. panel height: 8 mm Max. panel height: 55 mm Min. edge thickness (roll): 0.4 mm Max. edge thickness (roll): 3 mm Max. edge thickness (solid wood): 12 mm Configuration: Strip edge magazine Glue pot capacity 1.5 kg, with independent motor No. 4 pressure rollers with pneumatic feed, first roller with independent motor Edge roll guillotine End trimming unit with 2 independent motors, tiltable 0-15° - each 0.35 KW - 12,000 rpm Overlapping trimming unit with 2 motors, each 0.65 KW - 12,000 rpm - tools with reversible knives Tiltable corner rounding unit for flat/radius finishing; 2 motors each 0.5 KW - 12,000 rpm, electro-pneumatic positioning - tools with reversible knives Electro-pneumatic exclusion of the unit Glue scraper unit Machine length: 4,310 mm Year of manufacture: 2009 CE marked

Condition: excellent (used), SCM F520 Jointer Redpfjxp Ic Nsx Agwech Working width: 520 mm Four-knife cutterhead Traditional knives Electronic raising and lowering of the worktable Main fence adjustable up to 45° Table length: 3000 mm CE certificate DTR documentation

Condition: excellent (used), Catalogue number 7738 TECHNICAL SPECIFICATIONS SURFACER/JOINTER: - shaft width: 500mm - 4-knife cutterblock - sound-dampening riving knife/comb - shaft guard - adjustable tilting fence - table length: 2200mm - infeed table length: 1180mm - both tables adjustable THICKNESSER/PLANER: - max thicknessing height: 240mm - thicknesser shaft guard *top side: - anti-kickback fingers - feed roller: toothed, spring-loaded - pressure bars - planer cutterblock - pressure bar - outfeed roller: smooth - adjustable roller in lower table - 2 feed speeds: 7/14 m/min - main motor: 5.5kW - electric brake - extraction port diameter: 150mm - dimensions L/W/H: 2300x950x1100mm Rcedpoxcx Ucsfx Agwjh - weight: 910kg ADVANTAGES – Italian manufacture – 4-knife shaft – Long tables – Excellent, original condition, never repainted – Used surface planer and thicknesser Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: used, Year of construction: 2011, · Working area: 2,550 x 1,067 mm · X-Y travel: 2,980 x 1,450 mm · Z-axis travel: 150 mm · Passage height: 120 mm Drilling unit F14: · Drilling head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm optionally available) · Power: 2.2 kW · Grid spacing: 32 mm · Drill holder: M 10 with 11 mm centering · Pneumatic feed stroke: 60 mm Grooving saw unit in X: · Integrated in drilling head · Grooving saw blade with diameter up to max. 120 mm Main milling unit: · Tool holder HSK 63F · Speed 1,500 - 24,000 rpm, infinitely variable by inverter · Motor power 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power 7.5 kW (10 HP) from 12,000 rpm (S6) · Right/left rotation · Ceramic bearings · Prepared for use with angle heads Tool changer TR10: Automatic side tool changer for 10 tools. · Number of tool stations: 10 · Max. tool diameter: 120 mm · Max. tool weight: 4.5 kg · Max. total weight of all tools: 28 kg Rsdpfx Aexqd Scjgwoch A central extraction nozzle combines all processing units into one connection with D = 200 mm. This reduces the required extraction capacity to approx. 3,200 m³/h. Worktable TVF: The worktable is designed to guarantee maximum operator freedom of movement. The quick-release vacuum system provides maximum flexibility for precise positioning and optimal holding of workpieces. · 4 TVF supports L = 1,100 mm, infinitely adjustable in X · 12 TVF vacuum pods 120 x 120 mm, infinitely adjustable in Y · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (a total of 4 pcs.) · The retractable reference stops are CNC-controlled Automatic central lubrication: The correct amount of lubricant is distributed via an electronic CNC control unit (X, Y, Z axes). Vacuum system (base machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. vacuum (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files - Import of ASCII files - User interface in operator's native language Safety devices with bumpers Machine technical data: · Total connected load max.: 18 kW · Recommended fuse: 64 A · Power supply: 400 V, 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction nozzle diameter: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Vacuum: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L = 1,100 mm and 18 vacuum pods 120 x 120 mm Cross laser for positioning vacuum pods Two cross lasers mounted on the aggregate carrier serve for easy positioning of the vacuum pods. Location: Supplier

Condition: used, SCM S 630 Heavy-duty thickness planer – for joinery, carpentry Planing width 630 mm Rcedpfjxp H D Sox Agweh Planing height 300 mm 4-knife safety cutterblock, auto brake / indicator light 7.5 kW main motor Electronic thickness table adjustment Digital/LED Infinitely variable feed 6–20 m/min. Machine from training workshop in TOP CONDITION Available ex stock Lieboch

Condition: excellent (used), CATALOG NUMBER 7618 TECHNICAL DATA - shaft width: 500 mm - number of knives: 4 pcs - max thickness of workpiece: 230 mm Rsdpfxowbdlys Agwoch top section: - anti-kickback fingers - toothed, feed, swivel, sequential infeed shaft - pressure rollers - planing shaft - pressure roller - smooth feed outfeed shaft bottom section: - 2 slip rollers in the table - motor: 5.5 kW - manual table height adjustment - 2 feed speeds: 7.5; 13 m/min - extraction port diameter: 160 mm - dimensions (L/W/H): 1100x1000x1200 mm - weight: 600 kg ADVANTAGES – made in Italy – original paint (not repainted) – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Rcodpfovvi I Rsx Agwsh

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Rcsdpfx Aevwbp Aogweh