Used Scm Fs 520 Class for sale (608)

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Duodsvyuqfspfx Ac Non

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast iron table High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 With right-left rotation of the milling spindle Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm saw blade tilting 90° - 45° cutting width 900 mm speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Duedpscnwydofx Ac Njn Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), SCM S520 Thickness Planer Working width: 520 mm Working height: 250 mm Adjustable feed speed: 4 steps Duedpfox Hfg Njx Ac Njn Cutterhead with traditional knives 4-knife cutterhead Power: 4 kW Weight: 670 kg

Condition: used, Year of construction: 2000, functionality: fully functional, – very good condition – Italian manufacture Djdpfxjxl D Nqo Ac Neun – year of production: 2000 TECHNICAL PARAMETERS: SURFACE PLANER: – working width: 410 mm – number of knives: 3 pcs – infeed table dimensions: 1030 x 410 mm – outfeed table dimensions: 930 x 410 mm – adjustable fence – noise-reducing comb THICKNESSER: – planing height: 3–230 mm – shaft diameter: 72 mm – shaft speed: 5300 rpm – table size: 700 x 410 mm – feed speed: 7 m/min – main motor: 4 kW – machine dimensions (L/W/H): 200 / 90 / 120 cm – weight: 400 kg

Condition: excellent (used), Year of construction: 2010, Planer Thicknesser SCM FS410 NOVA Working width: 410 mm Thicknesser working height: 220 mm Thicknesser table mounted on 4 supports Dodpfewtytdex Ac Nsun Two planing speeds via thicknesser: 6–12 m/min Four-knife cutter block Cutter block with Tersa knives Cutter block diameter: 95 mm Cutter block speed: 5,000 rpm Additional fence for planing low elements using the jointer Motor power: 4 kW Jointer table length: 2,200 mm Mortising and boring unit CE Certificate Technical documentation

Condition: excellent (used), Width 520 mm Length 264 cm 4 Tersa knives hydraulic table lift Duedpfx Aeub Uifoc Non Neat, works You can call or write to us. We speak and write German and Russian. You can also send us messages in English. 17.2.5

Condition: excellent (used), Year of construction: 2001, working width 520mm 4-knives shaft with classic knives delta/star start Dujdpfsw Ad Nzjx Ac Nen electric regulation of infeed table digital display of table position fence with angle regulation fence length 1500mm tables length 3000mm

Condition: used, SCM SC3 classic Dusdpfow Nwdwox Ac Njn Model: SCM GROUP SPA Manufacturer: SC 3C Max. saw blade diameter with scoring blade installed: 315 mm 90%45° max. saw blade projection from table: 100/79 mm Cutting width on parallel fence: 900 - 1270 mm Squaring stroke: 2310 - 2260 mm Three-phase motors starting from: 5(6)/50(60)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AB00003274, overall weight: 865 kg, travel distance X-axis: 3,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 50 mm, TECHNICAL DETAILS Dusdpfx Aeyfg Ahjc Nen Working area X-axis: 3,050 mm Working area Y-axis: 800 mm Working area Z-axis: 50 mm F10L drilling head: 10 spindles Vertical drilling spindles: 7 (independent) Horizontal drilling spindles in X: 1 Horizontal drilling spindles in Y: 2 Integrated saw blade on X-axis: 1 MACHINE DETAILS Control: 7" touch screen display Weight: 865 kg

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,380 mm, travel distance Z-axis: 250 mm, controller model: Xilog Maestro, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Working Area X-Axis: 3,680 mm Working Area Y-Axis: 1,380 mm Working Area Z-Axis: 250 mm Dusdpfx Aeydmbnec Non Spindle Speed: 24,000 rpm Number of Working Zones: 2 Number of Adjustable Bars: 6, 1,300 mm Number of Pneumatic Bakelite Bars: 4 Number of Adjustable Suction Cups: 3 Front Tool Changer System: 10 positions Rear Tool Changer System: 16 positions F 12L Vertical Drilling Head Spindles: 8 F 12L Horizontal Drilling Head Spindles X-Axis: 2 F 12L Horizontal Drilling Head Spindles Y-Axis: 2 MACHINE DETAILS Electrospindle: 12 kW, HSK 63F Vacuum Pump: 250 m³ Control System: Xilog Maestro EQUIPMENT Tecpad Mobile Console Bar Worktable Laser Line for Virtual Zero Positioning on Y-Axis Prisma KS 5-Axis Vertical Electrospindle Tool Group Blades for Groove Cutting Pro-Speed Safety System Front Guard and Safety System Automatic Lubrication System

Condition: ready for operation (used), Year of construction: 2019, operating hours: 336 h, functionality: fully functional, total length: 4,764 mm, edge thickness (max.): 8 mm, overall weight: 1,840 kg, controller model: Maestro Pro Edge, Edge banding machine with only 336 operating hours & comprehensive accessories! TECHNICAL DETAILS Max. edge thickness: 8 mm MACHINE DETAILS Control: Maestro Pro Edge Electrical Data Voltage: 400 Volt Frequency: 50 Hz Dimensions & Weight Machine length: 4,764 mm Weight approx.: 1,840 kg Operating hours: 336 h Edge Banding Machine Configuration: Flush trimming and scraper unit, radius: 1 mm Flush trimming and scraper unit, radius: 2 mm Spraying unit for edge finishing Spraying unit for delicate edges Surface scraper "RC-V" Dsdpfx Aeydc Abec Noun Brushing unit "SP-V" "SAVENERGY" kit "EASY SIZE" device Internal lighting for the enclosure and gluing area Ceramic lamp with infrared rays Electronic positioning of the pressure rollers Spare adhesive tank "SGP" with NC dosing system Additional adhesive tank "SGP" with NC dosing system Manual feed "Nesting" tracing rollers Diamond tools H=64 for pre-milling unit, 2 teeth Base

Condition: excellent (used), Stock number: 7713 TECHNICAL DATA - Max. working width: 240 mm - Max. working height: 130 mm - 6 spindles: 1) Bottom horizontal 240 mm, 7.5 kW 2) Right vertical 130 mm, 5.5 kW 3) Left vertical 130 mm, 5.5 kW 4) Top horizontal 240 mm, 7.5 kW 5) Top horizontal 240 mm, 5.5 kW (spindles 4 and 5 are electrically adjustable up/down) 6) Bottom horizontal 240 mm, 5.5 kW - All spindles adjustable vertically and horizontally - Spindle diameter: 40 mm Feed system: • From above: - 8 driven, geared steel feed rollers (including 3 double rollers) - 4 driven, smooth rubber outfeed rollers (including 2 double rollers) • From below: - 3 smooth feed rollers - 3 lateral pressure rollers - Infinitely variable feed speed controlled by inverter - Pneumatically pressed rollers - Feed motor: 7.5 kW - Feed via Cardan shaft rollers - Electrically adjustable planing thickness Dujdpfxsyh N Aye Ac Njn - Body lifting motor: 0.75 kW - Infeed table length: 2,480 mm - Pneumatic opening/closing of safety cabin - Pneumatic blowing of table - Central table lubrication - Extraction connection diameters: 3 x 120 mm, 3 x 150 mm - Dimensions (LxWxH): 5,300 x 1,700 x 1,800 mm - Weight: 5,000 kg ADVANTAGES – Italian manufacturing – 6-head configuration – Suitable for wet and dry timber – Pneumatic cabin opening – Pneumatic table blowing – Spindles 4 and 5 adjustable electrically – Used planer, in very good condition Net price: 136,900 PLN Net price: 32,600 EUR (depending on exchange rate, 4.2 EUR) (Prices may change with currency fluctuations)

Condition: excellent (used), Wide Belt Sander SCM Sandya 30 RT Working width: 1100 mm Working height: 3–160 mm Number of units: 2 Calibration drum Unit with segmented shoe Motor power: 1. 15 kW 2. 11 kW Dsdoyh N Icopfx Ac Neun Optical oscillation Abrasive belt dimensions: 2620x1115 mm

Condition: excellent (used), Catalogue number 6368 TECHNICAL SPECIFICATIONS Dsdpfx Aeyh N Agec Njun - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 7 spindles: 1) bottom horizontal, 230 mm, 5.5 kW 2) right vertical, 130 mm, 5.5 kW 3) left vertical, 130 mm, 5.5 kW 4) top horizontal, 230 mm, 7.5 kW 5) top horizontal, 230 mm, 11 kW 6) bottom horizontal, 230 mm, 18.5 kW 7) universal, 230 mm, adjustable 360°, 5.5 kW - all spindles adjustable up/down, right/left - all spindles equipped with electric brake - spindle diameter: 40 mm - spindles 4 and 5 adjustable electrically up/down - top: 8 metal feed rollers, twisted, including 2 double rollers - top: 4 rubber outfeed rollers - top: 2 hold-downs - bottom: pawls - bottom side: 3 hold-downs - bottom: 2 smooth metal feed rollers - bottom: 2 double rubber feed rollers - rollers pneumatically loaded - feed via Kardana shafts - stepless feed speed adjustment 5–36 m/min - feed motor 4 kW - electric thickness adjustment 0.75 kW - infeed table length: 1980 mm - fully enclosed in soundproof cabin - central lubrication for the table - extraction port diameters: 5x120 mm, 2x150 mm - dimensions (L/W/H): 5500 x 1840 x 1900 mm - weight approx. 5000 kg ADVANTAGES – Italian manufacture – 7-head configuration – suitable for wet and dry wood – universal final spindle – unpainted – used four-side planer, in very good condition Net price: 146,900 PLN Net price: 34,970 EUR, depending on exchange rate 4.2 EUR (Prices may vary in case of higher fluctuations)

Condition: used, Number of spindles 6 St. Working width 240 mm Working height 120 mm Dimensions (L/W/H) 4900 x 1700 x 1700 mm weight of the machine ca. 3500 kg Control CNC SCM SUPERSET NTE 31 PLUS automatic profile milling machine with 6 shafts 14 axis control with touch screen - WINDOW VERSION Machine with 6 spindles Spindle speed 8,300 rpm Working width 240 mm, working height 120 mm Electronic horizontal and vertical positioning of the spindles Glazing bead cutting Touchscreen controls Detailed technical description, see adjacent PDF documents. Suction nozzle diameter: 1. Spindle down: 120mm 2nd spindle right: 120 mm 3. Left spindle: 120 mm 4. Spindle top: 150mm 5. Spindle top: 150mm 6. Spindle below: 120mm Option: workpiece return to the operator Djdpfx Acjyhxmuo Noun Images are from our archive of a machine of the same model. (Technical information according to the manufacturer - without guarantee!)

Condition: good (used), Code: 0293 Brand: SCM Model: T 160 Automatic spindle moulder with tilting spindle with feeder Technical data: Sturdy structure with cast iron table Duodpfjyhqiqex Ac Nen Automatic and manual spindle inclination 0 to 45° Automatic and manual vertical spindle adjustment Spindle reverse rotation Table dimensions 1000 x 1000 Worktable height 850 mm Spindle diameter mm 35 Rotation speed 2900-4400-6000-7800-10000 rpm Motor power Hp 5,5 Automatic 3-roller feeder Suction inlet diameter 120 mm Overall dimensions: mm 1100 x 1150 x 1550 h Weight kg 900

Condition: good (used), Code: 0292 Brand: SCM MINIMAX Model: FORMULA F1 - CE Standard Surface planer for planing wood materials, plastics, composite materials and various - CE Standard Technical data: Working width mm 410 Table length mm 2610 N° 4 knives Shaft diameter mm 120 Shaft rotation speed rpm 5000 Guide tilting from 90° to 45° Djdpfx Ajyhp S Roc Noun Max stock removal mm 8 Motor power Hp 5,5 Table height from ground mm 845 Suction hood diameter mm 120 Overall dimensions mm 2610 x 900 x 1070 h Weight kg 575

Condition: used, Year of construction: 2005, Dimensions (LxBxH): 373 x 125 x 190 cm Wide belt sander Timesavers 900 WWS year of manufacture 2006 Serial number 2217/043 units, pre-deburring, deburring, finishingbelt width 900 mmthroughput max. 150 mm50 Hz, 400 V, 58 kW Duedpfx Acjwnhdaj Nen Dimensions: 3500 x 1900 x H2100 mm, weight 4000kg - Year: 2005 - Documentation available: No - CE certificate present: No - Deals (actions): Super deal - Transport dimensions: 3730mm x 1250mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, Empty weight: 1.800 kg Dimensions (LxBxH): 325 x 155 x 150 cm Four-sided moulder Dujdpewnhk Tefx Ac Nsn SCM Compact 23K Built in 2002 Min/max working height 120mm Min/max working width 230mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Min/max tool diameter vertical spindle 100/180mm Input table length 2500mm CNC Program Engines 1st Spindle - Under 5.5kW 2nd/3rd Spindle - Left/Right 11kW 4th Spindle - Up 7,5kW Dimensions 3250x1550x1500mm (LxWxH), Weight 1800kg - Year: 2002 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 3250mm x 1550mm x 1500mm (l x w x h) - Transport weight [kg]: 1800kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, Storage location: Supplier Dsdsyhnvzjpfx Ac Njun

Condition: used, machine/vehicle number: 007855, Position 1: Single Edgebanders SCM-STEFANI KD Position 2: Panel Return Systems SCM-STEFANI KD Duedpfx Ajyhml Isc Nsn

Condition: used, Year of construction: 1999, Table dimensions 1200x730 mm Motor output 5,5 kW Spindle diameter 30 mm Djdpfxsxq Hiwo Ac Njun reus 3000-4500-6000-7000-10000 U/min Weight 810 kg

Condition: used, Year of construction: 2000, Cutting length: 3100 mm Cutting width at rip fence: 700 mm Cutting width at cross-cut fence: 2900 mm Cutting depth: 100 mm Dusdpfx Acoyhgi Hj Njn Scoring unit: yes Saw blade height adjustment: handwheel Saw blade tilt adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Cross-cut ruler display: scale Saw blade diameter: 315 mm Rotational speed: 4000 rpm Motor power: 4 kW Extraction connection: 120 mm Machine length: 3200 mm Machine width: 1700 mm Weight: 680 kg

Condition: excellent (used), Wide belt sander SCM Sandya CLK + Vacuum Working width: 1100 mm Working height: 3–160 mm Number of sanding units: 2 Calibrating roller: rubber-coated Combi unit with sanding shoe Main dual-speed motor: 12/15 kW Optical oscillation Satin-finish brush at machine outlet Dusdpfxoyhfnne Ac Nen

Condition: used, Working area: 2,600 x 1,250 mm Spindle motor: 7.5 kW Video: Available upon request Feed rate: Max. 38 m/min X-axis: 2,700 mm Y-axis: 1,600 mm Z-axis: 250 mm CNC machining center SCM Routech R 3000 for processing panel materials, featuring automatic loading (vacuum destacker) and outfeed. Duodpfx Ajn A Dwgec Nen Special price for self-dismantling and self-collection.