Used Schneider for sale (176)

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Vertical piston compressor with sound insulation hood DK 600Eco UNM STS 660-10-270 - Year of manufacture: 2013 Kljdpfx Aeypkr Ujp Aow - With integrated refrigeration dryer, 660 l suction capacity, 520 l output volume - 10 bar - Weight: 245 kg - Sound-damping hood - Condensate drain 4 kW, 400 Volt - Width: 960 mm, Depth: 740 mm, Height: 1905 mm - Noise level: 69 dB (A) - Barely any operating hours - IN ABSOLUTELY AS-NEW CONDITION Transport possible at extra cost!

Condition: used, with spindle adjustment depth in the tablesecond handMake SchneiderType SK2 / 8SMachine no. 80002Motor 4.5 / 5.5 kWmotorized brake electronically6 speed levels 3000/4000/5000/6000/8000/10000 ht-left runMilling arbor diameter 30 mmTable top extension approx. 2 x 450 mmMilling fence with fine adjustmentControl panel aboveSocket for feederExtraction connection D 100/120 mmRequired space approx. 2100 mm x 1300 mm x 1800 mmTotal connected load 5.5 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without guarantee and warranty Kljdpfovwf Icex Ap Aow

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Ksdsw Uc T Iepfx Ap Ajlw Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Payload: 60 kg Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700

Condition: reconditioned (used), Year of construction: 2005, MACHINING CAPABILITIES: - Mortise 30x30 mm, Max depth 150 mm - Vertical travel (Z axis) max 300 mm Adjustable via stops - Transversal adjustment (Y axis) max 300 mm (290 mm with fence) Front and handwheel adjustment - Longitudinal adjustment (X axis) max 300 mm Manual with pneumatic clamping Kledpfx Apjx Rz Dxo Aew MACHINE CONFIGURATION: - Welded steel frame - 2m support table, 40cm support rollers Fence stop guide 2000 x h.110 mm 2 pneumatic workpiece clamps Working height 1m (adjustable) - Automatic lubrication unit per cycle OTHER CHARACTERISTICS: - Power supply 400V, 50Hz, Three-phase N+T, IN 16A - Installed power 3 kW - Dust extraction: 1 top port Ø95mm ext. for Ø100mm hose - Required pneumatic supply 7 bar - CE marking, lockable main switch - Overall dimensions (LxWxH): 2.10x1.10xh.2.20m - Weight 350kg

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 7.50.1081, Schneider & Koch AOI TS-LV6 / LaserVision Twin LV6 Automated Optical Inspection System (used 2D/3D AOI for SMT circuit boards, fully functional, manufactured approx. 2014–2016, for precise inspection of components, solder joints, and paste) Kjdpfxoyid Dus Ap Ajlw Test technology: Schneider & Koch Model: TS-LV6 AOI unit Fully operational

Condition: used, Format: 360 x 360 mm Klsdpfey Dufpjx Ap Asw Equipment: mobile envelope feeder format from 100 x 100 mm to 360 x 360 mm speed 15000 per/hours senor controlled for automatic speed adjustmend

Condition: used, Cup Surface Grinding Machine / Cylinder Head Grinding Machine Max. grinding area: 835 x 200 mm Electromagnetic clamping plate: 500 x 200 mm Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Machine weight: 1000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Kljdpfx Apewlbz Ts Asw

Condition: refurbished (used), machine/vehicle number: SC03, PJ.105.100F/0x Schneider Servo Controller Klsdpfxey En Utj Ap Aow for M10 Drive Motor of Suprasetter A52/A75 >2009 (GEN III) second-hand (refurbished) All offers are subject to prior sale

Condition: used, Schneider SF 60 Envelope Feeder: Single-sheet envelope feeder, year of manufacture: unknown, in good condition, immediately available. Please request a quotation. Ksdpfsx Af T Ejx Ap Aslw If you are interested, we are also happy to inform you about other machines in our inventory. You are welcome to arrange an appointment to inspect the machine at our premises.

Condition: good (used), Year of construction: 2000, machine/vehicle number: M-0510-008-04/10-00, Unloader Schneider Senator RS SR0059, year of manufacture 2000, machine number M-0510-008-04/10-00, in good condition, available immediately If you are interested, we will be happy to inform you about other machines in our company. Klsdpfx Apstukkvs Aow You are welcome to view the machines at our premises by prior appointment.

Condition: good (used), Year of construction: 2005, machine/vehicle number: M-078E-018-11/20-05E, Schneider Senator 078E-Line paper cutting machine, serial number: M-078E-018-11/20-05E, built in 2005, with air table, side table, light barriers, and program control, in good condition, available immediately. Kodpfx Aowivimep Aslw If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machines in our facility by appointment.

Condition: excellent (used), Year of construction: 2017, Schneider Ozga strapping machine for strapping parcels Kjdpjtyytpjfx Ap Ajlw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 820x410x810 mm Ksdpfx Apov A Hvxs Aslw Weight 64 kg Total power requirement 2,2 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1070x495x895 mm Weight 80 kg Total power requirement 3 kw Kledsv A Hv Ejpfx Ap Ajw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 750x705x1800 mm Weight 170 kg Kjdpfxsv A Hv Se Ap Aslw Total power requirement 4 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 945x705x1800 mm Weight 206 kg Total power requirement 4 kw Kljdpfov A Hwcex Ap Aew

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1950x690x1700 mm Weight 431 kg Total power requirement 7,5 kw Klodpfjvz Ez Dsx Ap Aew

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1950x690x1700 mm Kodpfovz Eklox Ap Ajlw Weight 426 kg Total power requirement 5,5 kw

Condition: used, machine/vehicle number: 478, pression: 36 t max. mounting height: 135 mm Klodpsbb Tgujfx Ap Aow electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm weight: 1800 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1950x690x1700 mm Weight 451 kg Total power requirement 11 kw Kledpfx Apjyt R N Us Aow

Condition: used, Linear unit, linear axis, portal axis with servo drive, synchronous servomotor, electric slide, loading unit, linear guide with servomotor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO, type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical travel via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Kjdpjgf Ix Ajfx Ap Aolw Maximum speed: 1 m/s Drive element: ball screw drive Guide type: ball bearing guide, size 20 Payload: 60 kg Maximum speed of ball screw spindle: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Current consumption: max. 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide slide - Gripper jaws open pneumatically - Unit is mounted on a welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition A virtually identical linear unit is available under storage number 59702.

Year of construction: 1992, condition: ready for operation (used), A hydraulic industrial system Schneider for paper and cardboard processing is available. Power: 28kW, oil filling: 400l, operating pressure: 100bar-240bar, max. table load: 300kg, max. product dimensions X/Y: 2000mm/3200mm, weight: approx. 7900kg. An on-site inspection is possible. Kodpfxoyyy I Uj Ap Aolw

Year of construction: 2004, condition: used, Built in 2004 Capacity single straps up to 40 straps/min Size packaged good width max 580 mm min 180 mm Ksdpfx Ajdiyfrop Aelw Size packaged good height max 400 mm min 10 mm Equipment cross strapping machine 2003 HS inline strapping machine 2003 I

Year of construction: 2001, condition: used, Built in 2001 Capacity single straps up to 40 straps/min Capacity parallel straps up to 20 straps/min Capacity cross straps up to 18 straps/min Size packaged good width max 450 mm min 200 mm Size packaged good length max 320 mm min 200 mm Size packaged good diagonal max 560 mm Size packaged good width single/parallel max 580 mm min 180 mm Kjdpfx Aec Ift Top Aslw Size packaged good height max 400 mm min 10 mm Strap Polypropylenband width 5 mm Thickness min 0,35-0,55 mm Reel bead wire diameter 200 mm Reel external diameter app.450 mm Width 160/180/200 mm Electric supply 400/50 V/Hz Weight 510 kg (approx.) Equipment cross strapping with integrated turn table

Year of construction: 2000, condition: used, Built in 2000 Capacity single straps up to 40 straps/min Capacity parallel straps up to 20 straps/min Size packaged good width max 600 mm min 180 mm Size packaged good height max 350 mm min 10 mm Strap Polypropylenband width 5 mm Kljdpfjc Id Hxox Ap Aow Thickness min 0,35-0,55 mm Reel bead wire diameter 200 mm Reel external diameter ca.450 mm Width 160/180/200 mm Electric supply 400/50 V/Hz Weight 490 kg (approx.)