Used Schepping Shaping for sale (1,561)

Year of construction: 2009, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler Iedpfsw Rf R Uex Ah Noal - Technical documentation

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 3649, Country of manufacture: Switzerland Voltage: 380 V / 50 Hz / 3 Phases Net weight: approx. 445 kg Dimensions: 730 x 780 x 1380 mm Customs tariff number: 8459.6130 TECHNICAL SPECIFICATIONS Maximum distance between stops: 80 mm Maximum cutting length: 50 mm Maximum cutting diameter (with 24 mm dia. cutter): 36 mm Maximum module: 1 Number of teeth cut – with 1:4 ratio: 6-100 with 1:10 ratio: 6-200 Total rapid approach and plunge travel: 8 mm Maximum axial movement travel of the cutter: 10 mm Maximum plunge cutting travel: 2.5 mm Maximum movement of counter-spindle quill: 25 mm Maximum distance between workpiece axis and cutter axis: 30 mm Maximum cutter diameter: 32 mm Quill body diameter: 35 mm Continuously adjustable slide feed rate: 0-60 mm/min Constant rapid return feed rate of the slide: 3 m/min 8 spindle speeds: 660–5300 rpm Horizontal tilt of the cutter head: approx. 4° Iedpfx Ahew Uc Tbs Njal Cutter motor power (2 speeds): 0.37/0.59 kW Hydraulic pump motor power: 0.24 kW Coolant pump motor power: 0.07 kW Hydraulic oil tank capacity: 13 l Cutting oil tank capacity: 10 l Quill oil tank capacity: 10 l All technical data provided without guarantee and subject to errors or omissions.

Condition: excellent (used), 4-SIDED SIZING-SHAPING LINE (currently for Internal Doors). Composed by of the following machines: X10023A) Motorized infeed rollers table "CELASCHI"" X10023B) Double End Tenoner "CELASCHI" Mod. TSA 3 B 480 A Installed power KW 65 X10023C) 90° Motorized Transfer ("L-shape") conveyor "CELASCHI" Mod. Iaedpfowzmbqsx Ah Nol X10023D) Double End Tenoner "CELASCHI"" Mod. TSA 2 B 360 Installed power KW 60

Condition: ready for operation (used), Year of construction: 2015, General Data Iedpfx Ahox D Iyqs Noal Machine weight 7000 kg Control Unit Brand SIEMENS Model n/a Additional Equipment Rolling, single tooth parts, spiral feed This 3-axis LORENZ LS 150 gear shaping machine was manufactured in 2015. It features a connected load of 60KVA, a rated current of 50A, and operates on a 400V system. Weighing 7000kg, this machine has been modernized to enhance performance. If you are looking to get high-quality milling capabilities, consider the LORENZ LS 150 machine we have for sale. Contact us for more information. Application Types Shaping & Planing

Condition: ready for operation (used), Year of construction: 2007, A Hahndorf keyway slotting and broaching machine is available. Stroke range slotting: 60mm-300mm, max. slot width slotting: 34mm, max. slotting length: 300mm, max. slot width broaching: 14mm, max. broaching tool length: 640mm, max. cutting speed forward/return: 3m/3m/min, weight: approx. 300kg. Documentation available. On-site inspection is possible. Ijdpfjx Ih Daox Ah Neal

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and Iodpfx Aov Ehbbsh Nsal other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm max. module 22 mm Ring thickness for internal gearing max. 500 Control Siemens 840D table diameter 1500 mm table hole 500 mm Table rpm 3,5 1/min table load 200 kN Stroke length 30-330 mm no. of strokes doubel-strokes per min. 10 - 200 1/min. axis distance 70 ... 1220 mm max. radial velocity 3000 mm/min weight of the machine ca. 38000 kg Equipment/ accessories: - Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm - column increased for axial stroke 1200 mm max. - Shaping head drive power 30 kW - spindle diameter 160mm - max. tool diameter 300mm - max. cutter wheel speed 10 1/min - Cutting speed 5 ... 45m/min - max. lateral offset 50mm - coolant device coolant tank capacity 2500 l - documentation Iaedpfx Ahexylm Hj Nol

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Empty weight: 2.500 kg Price: On request Iaedowniikspfx Ah Nel - Year: 1959 - Documentation available: Yes - CE certificate present: No - Serial number: 80 - Control: Conventional - Motor power: 5.0kW - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year 2003 Processing machine for machining splines and sprockets on crankshafts or shaft-like components Liebherr PC-NC control system for disk cutting wheels in the range 180-300mm for hobbing Vertical machining with straight shaping head and synchronization Clamping in chuck in the machine bed and tailstock as counterholder Integrated ring loader between machining and loading position Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Iasdot Utdpepfx Ah Nol Front screen of the monitor defective, display undamaged after visual inspection Fuse for controls and drives included - free location Availability after consultation, warranty excluded Year of Production:2003 Shaping machine for producing splines and sprockets onto crankshafts and Control Liebherr PC-NC For shaping tooling in range of 180-300mm for Hobbing Vertical machining with straight cutting head and Synchronization Clamping in Jaw on the machine bed and tailstock as counterpart integrated Ring-load between Machining and loading position automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: ready for operation (used), Year of construction: 2008, number of axes: 4, Main Drive Number of axis 4 Iajdpfox D Iykox Ah Njl Additional Equipment rolling, single tooth, spiral feed This 4-axis Lorenz LS 420 gear shaping machine was manufactured in 2008. It features a NUM control system, capable of handling external and internal splines, single points, and segment splines. It can manage spline jointing up to B = 25 mm and spline hub profiles. The stroke length is 140 mm. Consider the opportunity to buy this Lorenz LS 420. Contact us for more information. Application Types Shaping & Planing

Condition: good (used), Punching machine Sahinler HPM-65 Model HPM 65 Capacity: 65 Tons Punching capacity: Ø 26 in 20 mm Cylinder stroke: 55 mm Throat depth: 625 mm Working height: 950 mm Power: 5.5 kW Weight: 2,440 kg Including various punches automatic feed / coordinate table very easy to operate for both single hole and multiple holes (program) Iodpfx Asx A Ttgeh Njal stroke x 1900 mm stroke y 400 mm Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we advise you to verify all relevant details. Financial information VAT/margin: VAT: The indicated price is exclusive of VAT (VAT is deductible for business customers).

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Isdpfx Ajxyadtsh Noal Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: used, Year of construction: 2003, max. wheel diameter 600 mm Iajdpfxevzhfls Ah Nsl gear width 92 mm max. module 8 mm max. ram stroke 100 mm table diameter 400 mm workpiece dia. 600 mm Shockable standard module max. 8 mm angle adjustable from - to -0,5 / +0,5 Grad stroke range 80 - 1200 Hübe/min feed radial axis machine column 1 - 3750 mm/min Accessories: - Various stop blade holders - Various clamping devices

Year of construction: 2020, condition: new, T-Shape 3-in-1 Multi-System // Built in 2020 T-Shape combines three powerful technologies that work simultaneously to promote collagen production and significantly reduce localized fat volume and skin elasticity. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness. Iaodpfjrxri Sjx Ah Njl - Skin tightening - Cellulite reduction - Fat deposit reduction - Circumference reduction - Post-liposuction treatment - Facelift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar, and hexapolar radiofrequency signal. Heat is generated by the contact of RF (radiofrequency) energy with tissue impedance. When properly heated, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, and the skin appears firmer, more compact, and younger. Vacuum Suction T-Shape features vacuum treatment technology with variable pulse modes. The vacuum lifts, folds, and compresses the skin to increase local blood circulation and stimulate lymphatic drainage. It promotes fibroblast activity and favors vasodilation. LLLT Laser Because the LLLT laser irradiates adipose tissue, it contributes to the formation of temporary micropores in fat cells and accelerates the fragmentation of triglycerides into glycerol and fatty acids, allowing them to escape from the cell, which in turn has a smaller volume. The released lipids are excreted through normal metabolic processes. LLLT effectively reduces body circumference through targeted application to the treated areas and has also been shown to reduce edema. Technical Specifications Supply voltage: 220/230 Vac 50/60 Hz Power consumption: 1300 W Weight: 45 kg Dimensions: 348 x 513 x 1008 mm Low-power laser wavelength: 760 nm Laser class: 3 R Laser density: 8 MW/cm² Bipolar radio frequency signal frequency: 1500 kHz (1.5 MHz) Maximum RF power: Less than 25 W Stimulated suction pressure: Less than 80 kPa (0.8 bar) Item condition: Used, good condition Find more items - new and used - in our shop! International shipping costs upon request!

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, spindle speed (max.): 3,000 rpm, travel distance X-axis: 90 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 400 mm, spindle bore: 40 mm, TECHNICAL DETAILS Travel Distance X-Axis: 90 mm Travel Distance Y-Axis: 80 mm Travel Distance Z-Axis: 400 mm Maximum Permissible Head Circle Diameter: 140 mm Milling Arbor Diameter: 22 mm Maximum Gear Cutting Length: 160 mm Angles Maximum Swivel Angle of Milling Head +A Direction: 45° Maximum Swivel Angle of Milling Head -A Direction: 118° Workpiece Spindle Outer Diameter: 105 mm Bore: 40 mm Rapid Traverse X-Axis: 7,500 mm/min Y-Axis: 5,000 mm/min Z-Axis: 15,000 mm/min Rotational Speeds Tool: 50 to 4,000 rpm Workpiece Spindle max.: 3,000 rpm MACHINE DETAILS Operating Hours: 29,790 h Cycle Time: 6,654 h Electrical Connection Mains Connection: 400 V (AC) Supply Voltage: 400 V (AC) Control Voltage: 24 V (DC) Frequency: 50 Hz Connected Load: 13 kVA Cable Cross-Section: 16 mm² Fuse Rating: 63 A Dimensions & Weight Space Requirement: 5.25 x 4.06 x 2.94 m Machine Weight: 8 t EQUIPMENT Industrial Filter IFS EC1500 Sediment Separator Knoll KF200/640 Iaedpsxvrarjfx Ah Nel Integrated Chip Conveyor with Magnetic Separator Machine Automation for Loading and Unloading Workpieces Robot Automation Güdel KTB-31/62, Year Built: 2018 with Station for Part Remover

Condition: used, Year of construction: 1954, total height: 2,000 mm, total width: 1,600 mm, total length: 2,400 mm, Empty weight: 1.000 kg Price: On request Chuck: 700mm  Workpiece maximum height: 550mm  Iajdpexbq U Ssfx Ah Nel X axis displacement: 450mm - Year: 1954 - Documentation available: No - CE certificate present: No - Transport dimensions: 2400mm x 1600mm x 2000mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1963, condition: used, Technical details: max. ram stroke: 150 mm workpiece diameter - max.: 250 mm slot width: 50 mm feed speed: 10 m/min. adjustment of stroke: ja mm voltage: 380 V work table:: Ø 250 mm total power requirement: 6,0 kW weight of the machine ca.: 1,05 t dimension machine xH: 1,2 x 0,8 x 1,6 m Application: For the internal grooving of flanges Drawing needle specifications: -total length = 650mm -Width = 10; 20; 30; 50mm -Drawing length = approx. 150mm Iedpou Ng T Uofx Ah Noal Lubrication takes place via the drawing needles. Equipment: 4 different drawing needle guides (5; 22; 32 and 50mm) 50 different flange holders 23x drawing steel holders shank 18mm; 12x shank 22mm; 7x shank 26, 30, 40 and 45mm incl. accessories see photo i.D. *

Condition: good (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 29406, Lot consists of: (1)CNC Gear Shaping Machine Position consists of: (1) CNC gear shaping machine Technical Details/Technical Details: English: max dia 130mm, max face width 25mm, min/max module 0.5-4, strokes 500 - 2,500 1/min, spindle dia 85mm, CNC Siemens Sinumerik 840D, 400V 50Hz 49kW, LxWxH 6.4x4.5x4.4m, weight 12to Parts Gantry System and/or Cranes are not included in the scope. German: Iajdpfxev R Tmte Ah Nel max. diameter 130mm, max. face width 25mm, min./max. Module 0.5-4, strokes 500-2,500 rpm, spindle diameter 85 mm, CNC Siemens Sinumerik 840D, 400 V 50 Hz 49 kW, LxWxH 6.4 x 4.5 x 4.4 m, weight 12 tons Parts gantry system and/or cranes are not included in the scope of delivery.

Condition: used, Year of construction: 1988, machine/vehicle number: 14411, stroke length: 220 mm, table diameter: 730 mm, For sale is a Lorenz LS 630. A robust and precise machine, renowned for its high build quality. The machine requires technical refurbishment due to the control system, but is in very good mechanical condition. It can process components up to module 12. A stable and high-quality Lorenz LS 630 that can be made fully operational again with some effort. Iodpfsxrcmbjx Ah Neal

Condition: ready for operation (used), Year of construction: 1965, A vertical gear shaping machine Lorenz is available. Module: 6.5, stroke: 120mm, max. gear diameter: 900mm, max. workpiece weight: 180kg, min. concentricity: 0.1mm, min. squareness: 0.05mm, roundness: 0.1mm. An on-site inspection is possible. Iasdpjxq Eyhefx Ah Njl

Condition: good (used), Year of construction: 2003, max. ram stroke 100 mm max. module 8 table diameter 400 mm workpiece diameter 600 mm strokes per minute 80-1200 Hübe/min Iaedpovfwuqofx Ah Nel Feed radial axis from - to 1 - 3750 mm/min angle adjustable from - to - 0,5 / + 0,5 Grad Accessories: - Various tool holders - Various clamping devices - Documentation

Condition: excellent (used), Shaping Iasdpfx Ahet R Tcqs Nsl Horizontal shaping machine Make Klopp Type 850 Hy Stroke length 850 mm table length 850 mm table width 420 x 690 mm Transport dimension : L.3500 mm W.1600 mm D.1600 mm

Condition: good (used), ø max. Gear 250 with 3" cutter module 5,5 hobbing length 70 cutter module 5,5 outside ø max. Acknowledged 300 mm ø spindle 85 mm ø hole table 39 mm ø table External centering Ø139,75 power tool motor (b) 4 Cv high 1.800 mm long 1.450 mm weight 2.450 Kg width 1.000 mm Iaedpfx Ahsgq Dgdj Nol

Year of construction: 2016, condition: ready for operation (used), Various machines for processing, walking, steaming, and preforming uppers and lasts for the shoe manufacturing industry are available. 1) Moccasin upper steamer Elettrotecnica 232/S, year of manufacture: 2008, tank capacity: approx. 15l, heating time: approx. 8min, power consumption: 6kW, machine dimensions X/Y/Z: approx. 600mm/450mm/950mm, weight: approx. 70kg. 2) 2x aluminum last preforming machines Nova M-BO, year of manufacture: 2002, max. temperature: 200°C, machine dimensions X/Y/Z: approx. 950mm/700mm/1350mm, weight: approx. 250kg. 3) Upper walking machine Ring-Leibrock Wasch 3-2K, year of manufacture: 2016, stations: 2, max. temperature: 120°C, stroke rate: 25/min, machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 420kg. 4) Upper preforming machine Irleh IR-13/P, year of manufacture: 2005, max. temperature: 160°C, machine dimensions X/Y/Z: approx. 1400mm/900mm/1600mm, weight: approx. 400kg. 5) 2x upper preforming machines RKK Kölsch H-BÜ, year of manufacture: 2007, max. temperature: 180°C, machine dimensions X/Y/Z: approx. 900mm/700mm/1300mm, weight: approx. 210kg. An on-site inspection is possible. Iaodpfsxnp Rrsx Ah Nel

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition. Iaedpfx Ahewzmpzs Njl