Used Schell Mäharbeit Factory for sale (1,816)

Condition: good (used), Year of construction: 2011, fully automatic gas forced-air burner, Weishaupt / monarch, WM - G20/2-A – used – : Crodpfx Aioz Sd E Esiji Price ex works: €4,950 (net) incl. loading Manufacturer: Weishaupt / monarch Burner type: WM - G20/2-A Design: ZM Factory number: 40047114 Year of manufacture: 2011 Cat. 112R3R Gas type: N Output: min. 150 kW, max. 2,100 kW Connection pressure: min. 15, max. 500 mbar NOx class: 2 Control voltage: 220 V Supply voltage: 400 V 4.32 kW Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: used, mileage: 117,000 km, power: 175 kW (237.93 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 7,850 kg, maximum load weight: 4,140 kg, overall weight: 11,990 kg, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 3,560 mm, brakes: engine braking, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 500 mm, Equipment: ABS, cabin, central locking, crane, cruise control, differential lock, traction control, trailer coupling, Vehicle location: en route / in transit, ClassicSpace, Mercedes PowerShift 3, steel body, short cab, 1 comfort seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, cruise control, telephone preparation, ABS (anti-lock braking system), traction control (ASR), differential lock, rotating beacon, tool box, leaf spring suspension, trailer hitch air-light-hydraulic, trailer hitch ball head, crane behind cab, emergency stop, grab control, foldable, 2-point hydraulic support, remote control, 3x hydraulic extensions, green environmental badge. Cedps Afp Atjfx Aiijri Wheelbase: 3560 mm, body: 3-way tipper Meiller with Palfinger PK 9.501 crane, 4.1m = 2.060kg, 9.8m = 780kg, radio S-CAB CLASSICSPACE, 2.30 M, TUNNEL, CENTER SEAT, WITH SEAT BELT, SEAT COVER VELVET DRIVER'S SEAT, PASSENGER SEAT, CENTER SEAT, GEARBOX G 90-6/6.70-0.73, MERCEDES POWERSHIFT 3, CD RADIO, BLUETOOTH, PLASTIC TANK 180 L LEFT, ENGINE OM936, R6, 7.7 L, 175 KW (238 PS), 1000 NM, ENGINE VERSION EURO VI, WITH OBD-C, HIGH PERFORMANCE ENGINE BRAKE, ACCORDING TO MB 60-2C, MPA DEEP, N-RPM, FACTORY TIPPER, MEILLER, STANDARD THREE-WAY TIPPER, 4000 X 2350 X 500 MM, FRONT WALL HEIGHT 700 MM, STABILITY CONTROL ASSISTANT, LANE KEEPING ASSISTANT, 2x TRAILER HITCH. Crane: 4.1m = 2.060kg, 5.6m = 1.420kg, 7.6m = 1.010kg, 9.8m = 780kg. Optionally available with grabber at an additional cost of 2,500 EUR! All information without guarantee, as the vehicle is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, mileage: 400 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Factory-new MAN semi-trailer tractor unit with detachable drop-side body and Fassi loading crane Type: TGS 35.520 8x2H-6 BL CH MAN HydroDrive, hydrostatic axle drive Cab: the Flexible (narrow, long, normal height) Cab suspension, Comfort Lift roof, mechanical Bumper, steel, 3-piece Front access step, integrated, with handhold Windshield, laminated safety glass (LSG), tinted Sun visor, in front of windshield Seat covers, textile, Comfort Premium driver's seat package, air-sprung, seat heating Driver comfort seat, air-sprung, with lumbar support and shoulder adjustment Seat heating for driver's seat Multi-function steering wheel, height and tilt adjustable Professional instrument cluster, 12.3 inches 1 bunk Refrigerator MAN sound system MAN TipMatic 12.28 OD Transmission for increased thrust share during driving Operation of MAN TipMatic, with steering column lever, manual (DNR selection, shift strategy selection) Transmission function MAN Idle Speed Driving Transmission function Rocking mode Driving program MAN TipMatic Performance and Efficiency, up to 70,000 kg Driving program MAN TipMatic Offroad, up to 70,000 kg Driving program MAN TipMatic Manoeuvre, maneuvering mode Differential locks on driven rear axles Trailer coupling Air horns Rotating beacons Auxiliary and work lights Mirror package Rear view camera system Diesel tank, aluminum, 390 l Crane type: F805R.27 hxp-techno + JIB L436 XF system (Extra Fast), XP system (Extra Power) and FL system (Full Lift) for optimized working speed and performance Danfoss D900 control block with four control valves on the crane column, including emergency operation FASSI V7S radio remote control with linear levers, display of pressure values (bar and %) as well as 90% / 100% warning in the display Hydraulic outriggers, extendable on both sides, outrigger width 8.29 m Outriggers operable by radio (black/white), emergency operation on the base Separate, hydraulically extendable auxiliary outrigger Outrigger width 6.90 m, with FSC-SL2, for mounting below the vehicle frame Winch V20 AWC, Permanent rope sheave Auxiliary jib (Jib) L436, hydraulically extendable in 6 stages Jib Double Power (JDP) Mounting: Crane front mounting Bolted fifth wheel coupling, adjustable Platform body as a steel/welded construction, detachable design Dimensions: Length approx. 4250 mm x width x 2480 mm, wheelbase 9,200 mm. Body in frame Folding aluminum side panels 800 mm high, "tipper side panel" design without spring assistance Platform floor with 4mm diamond plate steel Cjdpj Afa D Uefx Aiieri 8x recessed lashing points per side, 2500 daN Sturdy front panel consisting of a welded frame, welded steel sheet 4mm and 5x accessory hooks, front panel height 1000 mm, steel galvanized design. Inside with storage trays for the lashing eyes (70x70mm) Fenders, aluminum diamond plate design Multisafe lashing eye pockets - 2 rows across the entire width of the platform Tool boxes, aluminum diamond plate design 2 storage trays with lids from above (1x L and 1x R) on the auxiliary outrigger made of diamond plate steel Mountings (for support plates, crane plates) galvanized Mounting of an underrun protection at the rear and on the auxiliary outrigger, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics Mountings (for support plates, crane plates) made of steel, galvanized. Hydraulic front outrigger for 360° operating range Further information on request.

Condition: used, input voltage: 230 V, operating pressure: 6 bar, Remeha / Heizbösch Gas 210 ECO 200 used condensing gas boiler for commercial and central heating systems. Nominal heat output range: 20–200 kW. Output at 40/30 °C: 22.7–214 kW. Maximum operating pressure: 6 bar. Crodpfxj Afbraj Aiiji Electrical connection: 230 V / 50 Hz, 110 W, IP20. Aluminium sectional heat exchanger and modulating gas/air control. Nameplate gas category: AT-I2H; factory setting: 20 mbar. Adaptation to the local gas supply, installation and commissioning must be carried out by a qualified professional. Net price: EUR 5,000. Exact scope of delivery by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Tumbling machine, Rühle MKR-220, year of manufacture 2019. For sale is a Rühle MKR-220 tumbling machine, factory refurbished in 2019, in very good and fully functional condition. The machine operates on 400 volts, 4.5 kW, 16A, and is made entirely of stainless steel. Crsdpfx Ae Ad Hc Ijiisi Workshop inspected. Further information available upon request. Payment in cash or by prepayment. Sale only to commercial businesses. No guarantee, no warranty.

Condition: excellent (used), pressure: 3 bar, temperature: 134 °C, type of input current: three-phase, input voltage: 400 V, usable tank capacity: 2,500 l, Used Becomix production plant consisting of main mixer RW2500 and pre-mix vessel AB1200 for mixing, dispersing, homogenizing and emulsifying on an industrial scale. Originally used for sterile skin care products. Very good condition, complete factory overhaul planned (new seals, piping, pneumatics and control, homogenizer and drives overhauled), new stainless steel platform included. MAIN MIXER RW2500 • Working volume approx. 600–2,500 L, total volume approx. 3,458 L, 316L mirror polished • 0–3 bar, vacuum to -1 bar, up to 134 °C, jacket, TÜV approved • Anchor agitator with PTFE scrapers approx. 30 kW, rotor-stator homogenizer approx. 45 kW (5–25 m/s) • Recirculation line DN100, hydraulic lid PRE-MIX VESSEL AB1200 • Working volume approx. 400–1,200 L, turbo agitator, two-zone heating, transfer line FURTHER EQUIPMENT • CIP for both vessels incl. CIP rack, CIP/SIP capable, aseptic valves Cedo Ad H Iqjpfx Aiijri • Water ring vacuum pump approx. 200 m³/h, powder suction and liquid dosing • New Siemens PLC with touch panel, recipe control, GMP documentation SERVICE • Turn-key installation and commissioning available • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: TNC640, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MULTIMILL 1000 by EDEL Werkzeugmaschinen GmbH New-machine quality at a price that takes the pressure off your costing. The MULTIMILL 1000 is a 5-axis all-rounder with turning capability, mastering milling and turning in a single setup. Proven EDEL technology, combined with our complete factory refit procedure: every assembly overhauled, all wear parts renewed, fully measured and backed by factory warranty. Technical specifications: 1 5-axis milling machine EDEL MM1000 X/Y/Z: 1,000/800/700 mm 1 NC universal milling head M21 B-axis, (-)10° to (+)187°, 900/1,680/4,000 Nm, 330°/s, (55 rpm) 1 Milling spindle CS-21-180-A 21/32 kW, 100/130 Nm, 18,000 rpm, HSK-A63 1 NC rotary table CRT/1000/H/HT 960/2,048/4,000 Nm, 570°/s, (95 rpm), 20,000 N (centric) Face plate diameter: 900 mm 1 Heidenhain TNC 640 5-axis contouring control electronic handwheel HR 510 DXF converter CAD viewer KinematicsOPT enhanced energy efficiency Credpfx Aspiqzkeiioi 1 Remote service 1 Extraction unit for oil and emulsion mist filter systems, capacity approx. 2,000 m³/h cascaded filtration 1 Coolant/lubricant system 950 litre tank capacity External coolant supply: 30 l/min / 20 bar Through-spindle coolant: 20 l/min / 50 bar Wash-down gun: 40 l/min / 2 bar 1 Workpiece measuring system Touch probe BLUM TC 60 BRC radio technology 1 Tool changer HSK-A63 / 52 pockets Tool diameter 75/130 mm Tool length 300 mm Tool weight 8 kg 1 Chip conveyor Hinge belt / scraper belt conveyor 1 Switchable external air cooling (coolant / air) Coolant: 20 bar / Air: 6 bar 1 Turning technology package Machine control Heidenhain TNC 640 Rotary table CRT/1000/H/HS Tool interface HSK-A 63 Spindle clamping device Tool measuring system for turning tools 1 Switchable internal through-spindle cooling (coolant / air) Coolant: 50 bar / Air: 6 bar 1 Tool changer HSK-A63 / 80 pockets INSPECTION AND DEMONSTRATION AVAILABLE AT ANY TIME Arrange an appointment at our plant, and we will show you the machine in live cutting operation.

Condition: new, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro3, loading space volume: 8 m³, Mercedes-Benz Atego 1418 4x2 8,000L Fuel Tanker | 177 HP | Euro 3 The Mercedes-Benz Atego 1418 4x2 Fuel Tanker is a fuel delivery truck for fuel transport, distribution and mobile refuelling. Its 177 HP Mercedes-Benz Euro 3 engine, 4x2 chassis and approximately 8,000-litre steel tanker body create a practical solution for daily fuel operations. Key Highlights - Mercedes-Benz Atego 1418 4x2 - 177 HP (130 kW) Euro 3 diesel engine - Mercedes-Benz G 85-6 manual transmission - Approx. 8,000-litre fuel tanker body - Heavy-duty steel tank construction - Internal anti-surge baffles - Hydraulic fuel delivery pump - Integrated fuel metering system - Fuel delivery hose reel - Pump-assisted fuel discharge - Gravity fuel discharge - Dedicated equipment compartments - Rear tank access ladder - 3,560 mm wheelbase - 14.3-tonne weight variant - ABS braking system Built for Professional Fuel Distribution The Atego 1418 combines a compact chassis with a tanker system for transporting and dispensing fuel directly at the operating location. Internal anti-surge baffles help control liquid movement, while the steel tanker construction supports intensive use. The hydraulically driven fuel pump operates through the PTO system and works with integrated metering and hose equipment for controlled dispensing. Pump-assisted and gravity discharge provide flexibility for refuelling requirements. Applications - Commercial fuel distribution - Diesel fuel delivery - Mobile and fleet refuelling - Construction site refuelling - Agricultural operations - Heavy equipment refuelling Crjdezx Rqnspfx Aiiji - Generator fuel supply - Industrial and project operations Technical Specifications - Vehicle: Mercedes-Benz Atego 1418 - Type: Fuel Tanker / Fuel Delivery Truck - Drive: 4x2 - Engine: Mercedes-Benz 4-cylinder Euro 3 diesel - Power: 177 HP / 130 kW - Transmission: Mercedes-Benz G 85-6 manual - Wheelbase: 3,560 mm - Weight variant: 14.3 tonnes - Chassis fuel tank: 210 litres - Tank capacity: Approx. 8,000 litres - Fuel pump: Hydraulic - Fuel metering: Integrated - Tyres: 275/80 R22.5 - Cab: Mercedes-Benz Atego S-Cab Why Schaften Automotive? Schaften Automotive supplies factory-new Mercedes-Benz, MAN, IVECO and Scania commercial vehicles for international markets, including export documentation, custom body solutions, international transport and worldwide delivery. Contact our team for availability, export options and worldwide delivery. = More information = Year of manufacture: 2025 Year of construction: 2025 Applicable material: Fuel Number of cylinders: 4 Availability: in stock Body model: Fuel Tank

Year of construction: 2026, condition: new, functionality: fully functional, Liquid fertilizer / AHL / ASL - Tank, container, storage tank 100,000 liters capacity - factory new - above ground, made of steel sheet. The container complies with DIN-EN 12285-2 (formerly DIN 6616-D), has 2 saddle supports, an access ladder, and is primed on the outside - on untreated sheets. D = 2.90 m - L = approx. 16.00 m. The container will receive a factory-new plastic inner liner, including a leak detection device mounted in a protective box - see sample photo. The plastic inner liner has a "general building authority approval" and is therefore suitable and approved for the storage of liquid fertilizer AHL as well as NOx reduction agent AUS 32 (AdBlue). The price is ex works - free loading. (Delivery can be offered at a low cost for an additional charge.) We recommend: Sandblasting the above container on the outside, priming it, and completely repainting it - traffic gray / RAL color. (Other RAL colors are also possible upon request!) ASL (ammonium sulfate solution) is a popular liquid fertilizer that is produced in drying plants during the drying of liquid fermentation residues and in exhaust gas purification. ASL containers require a plastic inner liner due to the corrosive properties of the stored medium. Important: Cedsi A Hxvopfx Aiijri The tank shown (sample photo) is a revised 100,000-liter tank that has already been delivered to a customer. The plastic pipelines (PVC connection) are not included in the scope of delivery and can be purchased for an extra charge. In general: You will receive an invoice with VAT shown. The purchase is made according to our general terms and conditions. Other tank systems (new and used) as well as rental systems are also available! In addition, we purchase existing tank systems and can, with certified specialist company qualifications according to WHG (Water Resources Act), professionally empty, clean, dismantle, and transport them. ===== If you have any questions, please contact: ===== Alfred Schneider GmbH & Co. Tankbau KG Mr. Heß / Mr. Jakob Tiefenrod 2 34320 Söhrewald near Kassel / Hesse =====

Condition: used, Aluminum flat belt conveyor Geppert Belt AM-F 7.30m x 0.30m with drive The AM-F plastic modular belt is characterized by its slim design. The width of the frame is only 14mm wider than the chain. At the bend, it is only 40mm wider. The frame, including the chain, is 95mm high. The modular plastic chains of the AM-F are easy to clean, particularly durable, and maintenance is easily carried out by replacing individual links. Technical data: Year of manufacture: 2012 Length: 7.30m Width: 0.30m Height: 1.00m Drive: 220/240V 1PH Csdpjg Ib U Hsfx Aiieri Complete factory closure, large selection of storage mezzanines, pallet racking, shelving systems, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. More items - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), Large tray sealer direct from UK meat factory where it was packing ground meat in MAP trays. Credsilfkrjpfx Aiisi We have two identical machines available.

Condition: used, Interroll roller conveyor, 2.17m, with drive The Interroll roller conveyor element is in very good condition. In addition, the roller conveyor has its own drive motor. Credpfx Aioicayksioi Series: 5600 Width: 410mm Length: 2175mm Pitch: 75mm Load capacity: 200kg per meter Drive voltage: 400 volts Complete factory closure sale, large selection of storage platforms, pallet racking, shelving systems, and paternosters. High-quality industrial machinery, lathes, grinding machines, and hand tools. More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Sat B2599A Drawer Oven 1000T 130 °C Industrial Oven, Drying Oven If very different products or product parts with equally different processing times are to be treated independently of each other in the smallest possible space, drawer ovens are the most sensible and ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven External dimensions of the oven Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable volume in each drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, in a stabilized state: +/- 3 °C at 80 °C Frame: The basic structure consists of an unalloyed steel frame, on which the outer cladding made of unalloyed steel is mounted, painted in RAL 1013 (pearl white). The oven inner casing is made of aluminized sheet steel. The insulation between the two oven casings (inner/outer casing) is ensured by 120 mm of mineral wool. Floor: As with the oven walls, with 120 mm thick thermal insulation. Height (from factory floor to the first drawer): 800 mm +/- 100 mm, adjustable via the oven feet. Crsdpfx Aisim Ik Sjisi Openings: 3 drawers, height 250 mm, for a usable loading height of 120 mm. Maintenance doors: 2-wing maintenance door on the rear of the oven. Secured with screws. This door enables complete access to the inside of the oven. Handling of the parts: The handling of the parts is ensured via 3 drawers (stacked on top of each other). Height between each drawer: 250 mm Usable height per drawer: 170 mm, with almost 10 mm of clearance. The drawers are smooth and equipped with a closing piece on the drawer bottom to reduce heat loss when opening. Each drawer has a usable load capacity of 120 kg with load distribution over the entire area. Load peaks of up to 240 kg can be supported. The drawer seals are made of silicone. The locking mechanisms for each drawer are secured via electromagnets and controlled by the Siemens system. Time control of the minimum preheating time with a timer per drawer (located in the control cabinet). Time control of the maximum preheating time with a timer per drawer (located in the control cabinet). A temperature display is provided for each drawer. These displays will be arranged on the front of the oven, to the left of the drawers. Ventilation: Number of circulation fans: 1 Circulation rate: 4,400 m³/h at 1450 rpm Motor power: 1.5 kW Rated voltage: 400 V Rated current: 42 A Power: 24 kW You can find more industrial ovens in other sizes - new and used - in our shop! International shipping costs on request!

Condition: used, Lockable storage unit for valuable materials This item is a storage unit for valuable materials. The unit is equipped with a lowering gate as a locking mechanism, providing secure protection for valuable goods. Dimensions: 4.25 meters wide, 1.35 meters deep, and 2.85 meters high. Manufacturer of locking device: Warema Condition: used Credpfoh I D Aujx Aiioi Complete factory clearance sale, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinding machines, and hand tools. You can find more items – both new and used – in our shop! International shipping costs available upon request!

Year of construction: 2007, condition: excellent (used), Complex of portal center with two work areas and nesting with 1 work table: Cedpfx Aeizi Ttsiieri - two working spindles with a magazine for 18 sockets; L and R - industrial edging aggregates shop for 12 edges - EVA, PUR - station; - additional polyurethane station. The complex is designed for complete processing of details from chipboard and veneered MDF, etc. - cutting of details with nesting technology and complete processing of a portal center. The price does not include: - transport - dismantling - installation. Fully serviced by German IMA Schelling team in 2022. The edging unit is hardly used.

Condition: used, Elmo Rietschle (Gardner Denver) G200 Industrial Side Channel Blower / Vacuum Pump (12.5 kW, 2BH1900-7AH17), Used Equipment Technical Data: Manufacturer: Gardner Denver Schopfheim GmbH / Elmo Rietschle (Made in Germany) Type: G 200 / 2BH1900-7AH17 Factory Identification No.: BN 10024286 007 / 1007 Protection Rating: IP55 (totally enclosed, protected against dust and water splashes) Electrical and Performance Data (50 Hz / 60 Hz): Motor Power (50 Hz): 12.5 kW (2920 RPM) Motor Power (60 Hz): 14.5 kW (3500 RPM) Supply Voltage (50 Hz): 345–415 V (Δ) / 600–720 V (Y) Current Consumption (50 Hz): 28 A (Δ) / 16.2 A (Y) Maximum Vacuum / Differential Pressure (50 Hz): -290 mbar / +280 mbar Maximum Vacuum / Differential Pressure (60 Hz): -270 mbar / +260 mbar Features: Robust industrial cast-aluminium housing with cooling fins Oil-free generation of clean compressed air / vacuum Supplied with connected extraction pipework and support frame Overall Dimensions: Crjdpsz Rzt Aofx Aiioi Width: 730 mm Depth: 640 mm Height: 1090 mm

Condition: good (used), PA Eclipse SL6 high throughput tray sealer from ready meals factory. Crjdjpg Er Nopfx Aiiei

Condition: like new (used), Year of construction: 2021, Almost brand new condition. Bought in 2021 and only used for a few months before factory Bankruptcy. Great saving on new price. Credpfex Hazuox Aiisi

Condition: new, Ruchser standard offering with layout for a wooden window manufacturing process, including profiled glazing bead and screw-connected corner joints. ----- Daily capacity: approximately 30 windows Manufacturing process consisting of: Item 1.0 - Article 107850000 ----- 1 piece RU-PWD-H1600/130/4 profile rack, double-sided, length 1600 mm, width 850 mm, height 2140 mm for horizontal storage and transport of profile cut-to-size pieces. 12 support arm pairs per column, permanently welded to the column, 2 center columns adjustable, clear distance between support arms 130 mm, depth of support arms per side 400 mm, support arms with felt padding, with 4 swivel castors, diameter 150 mm, 2 of which with locking mechanism. Item 2.0 - Article 10776000 ----- 1 piece RU-MSTR assembly station for frame hardware 3000 mm long, 600 mm wide 1 piece shelf for hardware 1 piece support table with felt padding Work height adjustable between 900 - 1100 mm (Without screw units) Item 2.1 - Article 6747 ----- 1 piece guide rail with carriage, 3000 mm long Item 2.2 - Article 6308 ----- 1 piece balancer for tools, 3 to 5.5 kg Item 2.3 - Article 10778000 ----- 1 piece RU-STS-A screw feeder with automatic screw feeding system POWASERT, consisting of screw feeder and feeder unit ADS-MF4, complete with hose connections, screw feeder ADS 2445 RD with torque cut-off. Set to the screw guide used by the customer. Suitable for the following screw dimensions: Shank diameter: 2.4 - 4.0 mm Shank length 10 - 35 mm Head diameter 5 - 8 mm When ordering, information about the screw must be sent to the manufacturer's factory. Item 3.0 - Article 10782000 ----- 1 piece RU-EW-2S storage rack, double-sided Storage capacity max. 36 pieces of frame profiles in L-shape, screwed together, length 1200 mm, depth 800 mm, height 2200 mm, support beams with felt padding, 4 swivel castors, 2 of which with stoppers Item 4.0 - Article 10766000 ----- 1 piece RU-DR-1 rotary table with travel mechanism for frame assembly. Table with parking brake. Support platform with crossbars and one pull-out section each to the left and right with felt padding. Basic dimensions 1400 x 1400 mm, extendable up to 2500 x 1400 mm, work height 900 - 1100 mm adjustable Item 4.1 - Article 5360, permanently mounted tool storage 1000 x 400 mm for RU-DR-1 Item 4.2 - Article 6354 ----- 1 piece 3-meter travel rail for travel mechanism, rail 10 mm high Item 4.3 - Article 6454 ----- 1 piece travel mechanism with flanged wheels and parking brake Item 4.4 - Article 6788 ----- 1 piece corner screwing device, 1 pair of pneumatically height-adjustable clamping units for fixing the profiles at a right angle. Item 5.0 - Article 10383000 ----- Codpfx Ajytx Uloiieri 1 piece RU-DK-T14/34 rotary tilting table with pneumatic tilting mechanism. Work platform with 4...

Condition: used, mileage: 20 km, power: 125 kW (169.95 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,230 kg, color: white, gearing type: automatic, number of seats: 4, total length: 5,570 mm, total width: 1,995 mm, total height: 1,860 mm, loading space length: 2,030 mm, loading space width: 1,840 mm, loading space height: 350 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal Number: 4030.TZ26.SK21231 ---- Errors and prior sale excepted! Conversion to 3-way tipper * Subframe and tipping frame made of steel lightweight profiles, completely hot-dip galvanized * Aluminum sideboards, silver anodized * Sideboards can be folded down and locked with long-stroke latches * Rear sideboard can be folded down * 4 ball bearing tipping supports with Durenthan shell, 2 galvanized locking pins * 20mm thick rubber pads between subframe and tipping frame * Hydraulic cylinder drive via an electro-hydraulic unit, operable from the cab * Multi-stage telescopic cylinder with nitrided pistons * Underrun protection with lighting SPECIAL EQUIPMENT * Trailer hitch - 13-pole - for 3.5 t trailer load - 90° rear tailgate opening angle - height of the ball head approx. 50 cm (center) * Load compartment protection liner "sprayed", 12-volt connection on the platform * Package: Outdoor Package 2 - Engine and tank protection, steel - 100% rear locking differential * Package: Winter 1 - Leather steering wheel, heated - Front seats, heated * Auxiliary heater, programmable, with remote control ADDITIONAL EQUIPMENT * ABS * Towing hook, front * All-wheel drive, switchable * Trailer hitch preparation set * Audio system 44: Ford SYNC 4A * Exterior mirrors, electrically adjustable, heated, with indicator * Exterior mirror housing in vehicle color * Battery management system * Headliner made of woven fabric, light * Roof console, illuminated * Diesel particulate filter with SCR * Tachometer * Third brake light * ESP (Electronic Stability Program) * Power windows, front * High beam assistant * Ford Easy Fuel * FordPass Connect including eCall and WLAN hotspot * Heated windshield * Floor mats: carpet floor mats, front * Transmission: 6-speed automatic * Grille insert on the fender * Glove compartment with lid * Easy Lift tailgate * Tailgate handle, black * Rear window, heated * Interior mirror, automatically dimming * Dashboard, digital 8 * Air conditioning, front * Headrests (2) * Radiator grille * Paint: solid paint * Load securing system with protective frame * Steering wheel: Multifunction steering wheel * Steering wheel: Vinyl steering wheel * Center console, front, with integrated armrest * Engine cover * Fog lights * Package: Rear seat 18 * Package: Safety Package 2 * Package: Seat 36 * Package: Technology Package 19 * Upholstery: Fabric * Pre-Collision Assist * Wheel Package 9: Alloy wheels 7.5J x 17, 255/70 R17 * Wheel arch trim * Tire pressure monitoring system * Windshield wipers with rain sensor * Mud flaps, rear * Side sill protection * Selective driving mode switch * Power steering * Start-Stop system * Socket: 12-volt connection in the rear * Rear bumper, painted in vehicle color * Front bumper, painted in vehicle color * Tachograph, digital - Preparation * Daytime running lights * Door handles, painted in vehicle color * Traffic sign recognition system * Lashing eyes, external * Lashing eyes, internal * Immobilizer * Central locking with remote control ...and more ---- Crjdpfx Asymicaoiioi 1st owner. German version. Errors and prior sale excepted. 2-year factory warranty from registration (can be extended on request). We will gladly take your vehicle in part exchange. Financing/leasing is also possible without a down payment! Do you have any further questions? We will be happy to advise

Condition: new, mileage: 28 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 3,415 kg, maximum load weight: 2,600 kg, overall weight: 6,000 kg, axle configuration: 4x2, wheelbase: 2,800 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,700 mm, loading space width: 2,000 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, airbag, central locking, crane, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 6S15 with aluminum flatbed, rear-mounted loading crane with radio remote control. The vehicle is available for rent with a purchase option. Chassis: Fuso 6S15 Canter, gross vehicle weight 6,000 kg, payload finished vehicle 2,345 kg - Manual transmission - Limited slip differential - Batteries: 2 x 100 Ah - Trailer coupling with ball head, 3,000 kg with wiring kit (factory installed), possible upgrade to 3,500 kg - Heated exterior mirrors - Automatic climate control - Radio pre-installation, radio - Reversing alarm - Power take-off with increased RPM - Battery and AdBlue tank covers - Battery cut-off relay pre-installation - Continental traction tires 205/75/R16C Cedpfx Aioyhxdysieri - Seat covers - Optional reversing camera on request - Aluminum flatbed, external dimensions: approx. 2,800 mm x 2,070 mm x 400 mm - 18 mm floor plate - Floor subframe with airline rails all around - Airline rails also in the bulkhead - Side panels made of anodized aluminum with folding step, easily removable - Work light Loading crane: with 4 hydraulic extensions + mechanical extension, with radio remote control and hydraulic front outriggers (manufactured in Italy) - Remote control (high-quality, proportional control, 2 simultaneous functions, etc.) - Lifting capacity according to manufacturer: 3.55 m = 995 kg, 5.0 m = 670 kg, 6.40 m = 495 kg, 7.85 m = 365 kg, 9.30 m = 290 kg + manual extension 10.60 m = 200 kg - Zinc primer, Dinitrol cavity protection, stainless steel screws and stainless steel pipe clamps - Additional front stabilizers - Hydraulic tank - Pressure relief valve - Emergency stop - Lifting hook - User manual and parts list Errors and prior sale excepted. ... Automatic climate control, VAT deductible, ASR (traction control), ABS, radio, on-board computer, heated mirrors, immobilizer, central locking with remote, driver airbag, trailer coupling, power steering, locking differential, spare wheel, cab: short-haul, electric windows, crane, new condition, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/city/out-of-town), particulate filter, available for rent, emission sticker: green (class 4)

Condition: reconditioned (used), pressure: 2 bar, temperature: 133 °C, power: 45 kW (61.18 HP), type of input current: three-phase, input voltage: 400 V, usable tank capacity: 125 l, rotational speed (max.): 82 rpm, rotational speed (min.): 19 rpm, Used Symex CML125 vacuum homogenizer mixer in pharma design, factory overhauled with new seals. Complete process unit for mixing, dispersing, homogenizing, emulsifying, heating, cooling and vacuum – ideal for creams, ointments, gels and pastes in pharma, cosmetics and food. EQUIPMENT • Scraper agitator with PTFE scrapers and 2 baffles, for products up to approx. 100,000 mPas • Bottom homogenizer Symex HFDA 250, forward/reverse, double mechanical seal SiC/SiC • Large and small recirculation DN50, direct powder and liquid suction • CIP with rotating spray heads (Toftejorg), hydraulic lid lift • Liquid ring vacuum pump, temperature control unit (steam / cooling water) • Siemens S7-300 with touch panel, batch control, trend recording Cjdpjyf N H Aefx Aiisri • Documentation incl. manuals, wiring diagrams, test certificates; PED / AD2000 SERVICE • Turn-key installation and commissioning available, optional IQ/OQ • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Adaptive cruise control - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver seat - DAB radio - Differential lock - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air horn - Particle filter - PTO - Radio/Multimedia system - Rotating beacon - Rear view camera - Disc brakes - Sunroof - Sleeper cabin - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield Internal number for customer inquiries: Reference vehicle -> 3-150 MAN TGX 33.520 6x4 BLS with FASSI F485RA.2.28 xe-dynamic loading crane. Loading crane and superstructure: F 485RA.2.28 xe-dynamic Endless slewing range All hydraulic cylinders are double-acting Double-knee linkage system with PROLINK FASSI stability control FSC including LMB II Radio remote control, Fassi V7S Radio maxi-6 linear outriggers and color display FL system (Full Lift) switchable quick-gear valve for the outriggers Max. outreach 20.95 m with 1,325 kg lifting capacity (optional extendable to 24.95 m) Electronic overload protection with FX900 Danfoss D850 control valve Work lights Control system for additional function »Winch / xe-dynamic PAVIC semi-trailer crane superstructure in compact design Ball joint bearing on the superstructure to allow separate use of a ballast box (ballast box 3600 x 2480 x 800 mm, approx. €14,500 net) Vehicle: MAN TGX 33.520 6x4 BL SZM Technically permissible total weight 73,000 kg Engine D2676LF78 - 520 hp EURO 6e - 2650 Nm C -R OBD-D MAN TipMatic 12.28 OD, with Retarder 35 Driving program MAN TipMatic Performance, up to 70,000 kg Extension of driving program MAN TipMatic, 70,000 kg to 90,000 kg, heavy transport Driving program MAN TipMatic Offroad, up to 70,000 kg Rear axle Hypoid HYD-1370/HY-1350 Differential lock in rear axles Fuel tank 370l right and 60l AdBlue Drive 6x4 Wheelbase 3300+1350 mm Suspension Leaf/Air ECAS air suspension system Rear frame overhang 750 mm Trailer coupling ROCKINGER 400G150A Trailer coupling for pulling a semi-trailer (factory conversion) Fifth wheel coupling JOST JSK 37 C, mounting height 185 mm with integrated lubrication Fifth wheel distance 1125 mm Fifth wheel plate 40 mm, manufacturer JOST (fifth wheel load up to 36t) Cab GM: the spacious one (wide, long, medium height) Glass sunroof, electric Control panel MAN EasyControl, 2 functions, can be operated from the outside when the door is open Driver comfort seat, air-suspended with lumbar support, shoulder adjustment and heating Codpfx Aijylxrzsiori 2 sleeping berths Cool box under sleeping berth, fully retractable Storage compartment on the rear wall of the cab with swan-neck light and control module MAN Media System Navigation Professional 12.3 inches Infotainment control MAN SmartSelect with touchpad and direct selection buttons Smartphone integration Lane departure warning system LDW Digital axle load display (ALM) in the cab for air-suspended axles and more. Financing / leasing, as well as...

Condition: good (used), Year of construction: 2014, functionality: fully functional, Roll slitter type RGS50 - used Condition: good For slitting and shredding wound paper, cardboard, or plastic rolls onto a cardboard core - Motor power: 15 kW / double pump, 32 amps / 5-pole – 50 Hz, 3-phase - Control: PLC-supported, with two-hand safety circuit - Cutting force: 2 x 25 tons - Blade length: 2500 mm Credsyn Aghspfx Aiiji - Max. opening: 1600 mm With roll loading stand for increased work height and single-sided roll discharge - roll discharge height approx. 1200 mm Machine has been factory-tested and partially overhauled, ready for immediate use.

Condition: used, From a closed paper factory Olympus HBM Microscope Crsdpjyfg Auofx Aiiei 5 lenses: 5x, 10x, 20x, 50x, 100x eyepiece: 2 times WHK 10x