Used Scanner for sale (358)

Condition: excellent (used), functionality: fully functional, I sell a complete square of raw material imported from Germany and available for pickup in Osla near Boleslawiec. Manufacturer: Holtec + Falcone Germany, Range of processed diameters: from 14 to 65 cm Range of processed lengths: from 2.0 mb to 15 mb In the price of the sorting plant a very large stock of spare parts, i.e. chains, reducers, motors, cables. The raw material yard consists of: - Long timber feeder - 2 x Feeder for short timber, - Kesla brand crane at the feeding table for leveling the raw material on the table, - Complete operator station (cameras, monitors, computer), - Sorting plant system operating software, - Scanner of the amount of sorted raw material, Dodovcqi Ajpfx Albewb - Falcone 550 debarking machine from 2014, - Dripping saw, diameter 1600 mm, - Metal detector, diameter max 650 mm - Single boxes: 44 pcs. - Bark removal system from under the debarking machine - Removal system for waste generated during dripping. - Automation control , full optimization based on the set parameters . - Line capacity: up to . 300 000 m3 per year in two shifts

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 500 kg, total height: 2,750 mm, total width: 1,200 mm, total length: 1,400 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, overall weight: 1,800 kg, input voltage: 230 V, table width: 700 mm, table height: 600 mm, table length: 1,000 mm, year of last overhaul: 2026, maximum load weight: 500 kg, Equipment: documentation/manual, Nikon LKV 10.7.6 – complete 3D measuring system with scanner and probe For sale: Nikon LKV 10.7.6 in very good condition, complete with a Nikon LC15Dx 3D laser scanner and a Renishaw TP200 probe system. The combination of scanning and probing makes this measuring machine very versatile. The LC15Dx scanner is ideal for quickly and digitally capturing complex shapes and surfaces. This allows large amounts of measurement points to be collected in a short time, enabling efficient mapping of shape, contours, and deviations. Dwsdpfx Aozvyrcjlbsb The TP200 probe is suitable for highly accurate contact measurements, for example, of holes, surfaces, edges, and other geometric features. This allows both freeform shapes and critical dimensions to be accurately checked. With PolyWorks software, this machine is very easy and quick to program, so that measurements from both the probe and the scanner can be performed together in one program and included in the same report. The machine is offered complete, including: New PolyWorks|Inspector license High-end workstation computer Complete installation and configuration with calibration according to ISO-10360 Training and explanation Delivered ready for use A complete solution for 3D inspection, dimensional control, and quality control, allowing you to both scan quickly and probe with high precision. The machine is in very good condition and can be viewed and demonstrated by appointment. You are welcome to come and see the machine and discuss its capabilities. Please feel free to contact us for more information or to schedule an appointment.

Condition: used, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 1 kg, Equipment: documentation/manual, type plate available, For sale is a ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industry and research, especially when measuring components in challenging environments. Fast application, easy operation. Condition: Lightly used, primarily for trade shows, exhibitions, and training purposes. Scope of delivery: · T-Scan Hawk 2 Lite · Blue Class 2 laser, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS calibrated) · Sensor cable Dwjdpfx Alszyp Stjbeb · Transport case · Incoming inspection at our facility with sphere bars according to ISO 10360 · Acceptance certificate with proof of traceability · ZEISS INSPECT OPTICAL 3D Free · Sensor driver T-SCAN Hawk 2 ZEISS INSPECT OPTICAL 3D Free · Open and edit new and existing projects · Import of point clouds, polygon meshes · Creation, editing and processing of polygon meshes · Element construction: regular geometries, points, sections, curves, surfaces, dimensions · CAD import of standard formats IGES, VDA, STEP, JT Open, STL, PLY · Application of common alignment methods · Comparison against CAD with colored deviation display · Dimensioning and form/position evaluations according to ISO GPS and ASME Y14.5 · Report module Sensor driver T-SCAN Hawk 2 · Setup and calibration · User-guided calibration · Measurement data acquisition and project management · Configurable workflow assistant

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation Dsdpsy Ah Tkofx Albewb 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Serial No.: 21901006 CE compliant, Laser Notice No. 50 (2007) Complete with case as pictured Dodpfx Ajzvrmxslbowb

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: P260713248, 𝗢𝘃𝗲𝗿𝘃𝗶𝗲𝘄 The HOMAG VENTURE 115M is a high-performance, 5-axis CNC machining center designed for the precision machining of wood, wood-based panels, and similar materials. Its robust moving-gantry construction delivers outstanding rigidity, accuracy, and productivity for complex machining operations. 𝗠𝗮𝗶𝗻 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀 • 10 kW DRIVE5CS 5-axis spindle (8 kW continuous), 1,500–24,000 rpm. • A-axis: ±100°, C-axis: ±361°. • HSK F63 automatic tool interface with liquid-cooled spindle. • Suitable for milling, drilling, sawing, and true 3D machining. 𝗪𝗼𝗿𝗸𝗶𝗻𝗴 𝗔𝗿𝗲𝗮 • X: 3,100 mm • Y: 1,250 / 1,415 mm • Maximum workpiece thickness: 160 mm • Clearance height: 260 mm 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗘𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 • 12-spindle vertical drilling unit. • Horizontal drilling: 4 spindles (X) + 2 spindles (Y). • Automatic 90° grooving saw. • 21 automatic tool positions (14 rear + 7 side magazine). 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗛𝗮𝗻𝗱𝗹𝗶𝗻𝗴 • Vacuum console table with LED positioning. • Divided vacuum zones for pendulum processing. • Pneumatic stops and adjustable vacuum consoles. 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 & 𝗦𝗼𝗳𝘁𝘄𝗮𝗿𝗲 Dwsdpfezmgkmjx Albob • HOMAG powerControl with 21.5" Full HD multi-touch display. • woodWOP CNC software with integrated 3D visualization. • Professional CAD/CAM package supporting DXF, STEP, and IGES. 𝗦𝗮𝗳𝗲𝘁𝘆 & 𝗘𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆 • CE compliant with bumper protection and laser safety scanner. • EcoPlus energy-saving mode and remote diagnostics via TeleserviceNet. 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 Furniture manufacturing, doors, windows, architectural millwork, solid wood components, interior fit-out, and complex 3D machining.

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min Dodpoyzxfnefx Albewb - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press Dwedpfjzhub Asx Albsb A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: used, Year of construction: 2006, Kern 2500 Document Inserter & Multimailer, Kern Man Machine Interface, 10 & 6 x 9" Infeed Hopper, (6) x Document Infeed Hoppers, 12 Position Carousel Packing Unit, Outfeed Conveyors, Cognex Scanner System, SMX 3.2m Footprint. S/No. 6017410.001 (2006) Highest bid is subject to vendors approval. Dsdpfx Alozwnuuebowb Please Note: This lot is located in Birmingham, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Log yard with restacking unit Complete log handling system from the log receiving area to the transfer to the debarking line. The system performs automatic log handling, singulation, end trimming, metal detection, butt end reduction, debarking, 3D measurement, and sorting of the logs. Key technical data Capacity: approx. 30,000 m³ of logs in a single-shift operation Log diameter: approx. 160–660 mm Log lengths: 4,000–5,250 mm Special lengths up to 6,100 mm Dedezvyl Aopfx Albswb Long logs up to approx. 20 m Herzog processor head with 55 kW hydraulic unit End trimming diameter up to approx. 700 mm Integrated metal detection Hobest Primus butt end reducer for log diameters up to 900 mm EWD ER 90 debarker with rotor opening 100–900 mm Rotor drive: 45 kW, frequency-controlled Feed speed during debarking up to 30 m/min Calibrated Microtec 3D log scanner Sorting block conveyor with five hydraulic discharge stations The restacking unit automatically returns, singulates, and realigns the logs for feeding to the debarking line. It consists of, among other things, an approx. 18 m long log handling conveyor, a four-stage inclined conveyor, a 90° curved conveyor, a double-strand block conveyor, a transverse conveyor, and an integrated log turner. The restacking unit can be purchased separately if required.

Condition: used, Year of construction: 2011, - max. panel width 4500 mm - max. panel length 2200 mm - max. saw blade projection 127 mm - main saw 18.5 kW - scoring saw 2.0 kW - with lifting table used panel dividing saw Manufacturer: Selco Type: WNTR 730 Year of manufacture 2011 Dwjdpfszuyxmsx Albsb Technical data: Max. panel width 4500 mm Max. panel length 2200 mm Max. saw blade projection 127 mm with lifting table 9 grippers on the sliding fence Flexible grippers for positioning via NC Max. feed rate 130 m/min 1 saw unit with positioning via NC max. tool diameter 470 mm Motor power 18.5 kW Scoring unit max. blade diameter 200 mm Motor power 2 kW Quick-change device QUICK CHANGE SYSTEM Max. feed rate 185 m/min Machine programming software OSI Barcode label printer Barcode scanner Total installed power 44 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2018, condition: new, Demonstration machine Year of manufacture: 2018 With full warranty Features and technical data: Functionality · Room geometry capture via laser measurements Dsdpfx Alew I Uizebewb · Total station function: standard measurement points can be augmented by custom measurement points · Complex 360° panoramic capture from each room scan · Image and measurement functions for every detail · Complete photographic documentation · Preview panorama display via HottScan app · Data transfer via USB stick or WiFi with app Technical Data Overview Angle meter features Measurement range: Horizontal 347°, Vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05–80 m Laser class: 2 Laser type: 650 nm; < 1 mW Laser spot diameter (at distance): 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & light conditions Operation User interface: Control panel with soft-touch keys and LED lighting/Display of battery capacity/status and error indicators Data exchange Flash memory: 32 GB, USB and WiFi Range: 50 m (depending on environment) Power supply Power adapter: 14.8 V, 1.2 A, with a cut-off voltage of 16.8 V, primary voltage 100 V – 240 V, 19.5 VA, 50/60 Hz Battery: operating range between 11.2 V and 16.8 V Runtime: Up to 11.5 hours, depending on use of LED lighting; approx. 8 hours under typical use Environmental Conditions Operating temperature: operation and battery charging: +0° to +40° C Storage temperature: -20° to +50° C Dust and moisture: IP 40 Special Features · Hot Swap: the replaceable battery can be exchanged during operation in just seconds · Integrated lighting assists in poor lighting conditions · Mobility: Lightweight (approx. 4.7 kg) combined with a foldable tripod makes the HottScan HS-1 a compact tool for on-site inspection and maintenance jobs Your Advantages · Mobility (light weight) and long battery life · Avoidance of multiple on-site visits · Battery change within seconds · Free loan device in case of servicing from the 3rd business day Includes HottScan Room Modeler full version Software for generating a 3D room model from scanner data, export of quantity data in CSV format, geometry export in DWG/DXF format with layer structure, and Collada format Performance scope · Simple room modeling from first-person perspective · Export of quantity data in CSV format · Geometry export: DWG/DXF format with layer structure and Collada format with textures; continual post-processing possible in all 3D CAD programs Includes transport case for HottScan 3D room scanner · Weather-, corrosion- and temperature-resistant aluminum sheet · Lid and bottom profiles welded at the seam · 2 stainless steel hinges · 2 lever-lock clasps · Continuous rubber seal providing dust and splash water protection · Temperature resistance from -40°C to +80°C Interior · Egg-crate foam in the lid · Foam insert in the base with product-shaped cut-outs Availability: Short notice Location: Flörsheim

Year of construction: 2008, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Speed continuously adjustable up to 24,000 rpm Handheld control unit Minimal量 sprühung tensioner detection and tensioner displacement Profile length measurement at the head Dsdpfxozx Dz Ts Albowb Barcode scanner 5 pneumatic material clamps light barrier Additional material stop on the left for long profiles Spindle in like-new condition, spindle feeding force: 16 kN Weight: approx. 2,000 kg

Condition: excellent (used), The device performed only 140 measurements. NITON XL3t 980 GOLDD+ – a portable X-ray analyzer with a next-generation SDD detector featuring GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral databases for alloys enables the identification of stainless steels, tool steels, chromium-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, and zinc, zirconium, and aluminum alloys. The analyzer provides very fast measurement. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys such as: cast alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all iron-based alloys (0.00x% – 100%) and non-ferrous metal-based alloys (0.00x% – 100%) and rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x%-100%). The NITON XL3t 980 GOLDD+ analyzer operates based on BASIC PARAMETERS, meaning that it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that assigns a name, symbol, number, etc., to a known sample, and such samples will be identified by that name. Dwjdpfozlccisx Albeb a program for quantitative chemical analysis (SuperChem Teach Mode) – based on its own standards, we create our own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch-screen display. The screen is color and tiltable, which facilitates reading the results during field work. It includes an integrated scanner and backlit alphanumeric sample identification codes. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two interchangeable batteries. One battery enables continuous operation for 8-10 hours without the need to recharge. It has two libraries, 900 and 800.

Condition: used, Year of construction: 2023, SUNHUB – Compact Dispenser Djdpfx Aszf H Rdslbjwb Year of manufacture: 10/2023 Condition: good condition, as is, operational Equipment: HEAD SunHub -20-NH-UV-20-N.00 DOSING VALVES BP2 5-N-50 – INK PUMP 2.5 kg SCALE ICS06s-6M/f METTLER TOLEDO LABEL PRINTER + CODEBAR SCANNER External Pump 25 kg CONNECTION X-RITE

Condition: not inspected (used), Bluhm Systems Marking Laser Here we offer a Bluhm Systems marking laser. Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. Dwsdpfx Aljzgci Eobsb After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards. The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser specification in standard configuration Laser type: Fiber laser Laser output power: FL2 model: 19W; typical Wavelength: 1062 nm typical Internal modulation: 20 to 80 kHz Scanner head description: Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens types and their properties: Lens marking field: 70x70 mm to 300 x 300 mm Focal length: B 192 mm Operating environment conditions: Relative humidity: up to 80%, non-condensing Operating temperature: 5 - 40°C Recommended operating temperature: 15-25°C Dimensions W x H x D Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length, marking/control unit: 3 m Weight, marking unit: 5 kg Weight, control unit: 15 kg Mains voltage 115/230 VAC, 50/60 Hz, single-phase. Power consumption, FL2 model: 450W Type: e-SolarMark FL Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2023, operating hours: 4,600 h, functionality: fully functional, machine/vehicle number: 023-02-0021-WSXXL II CE12, overall weight: 3,500 kg, type of input current: AC, input voltage: 120 V, table length: 700 mm, table width: 400 mm, total height: 2,380 mm, total length: 2,450 mm, total width: 1,460 mm, laser wavelength: 1,064 nm, Equipment: type plate available, Photon Energy Workstation XXL II CEPHEUS Mark12 – UKP/Picosecond Laser System For sale is a well-maintained Photon Energy Workstation XXL II with CEPHEUS 1012 marker from ongoing operation. This system is particularly suitable for operators of existing Photon Energy/Hitachi systems, medical technology companies, laser marking service providers, or companies with a need for UDI-compliant, permanent marking. Key data: Year of construction/manufacture: February 2023 Operating hours: approx. 4600 hours Laser: Nd-Vanadate, 1064 nm Laser power: over 12 W at 500 kHz Pulse duration: under 15 ps Repetition rate: 20 to 500 kHz Cabinet dimensions: approx. 1.46 m x 2.45 m x 2.38 m Weight: approx. 3.5 t Scan field: 160 mm x 160 mm Telecentric lens: F 163 mm, scan field 90 mm x 90 mm ZD30 rotary axis available PHOTONmark, PUC/UDI Control, CamVisionPro and hand scanner available Last maintenance: June 2026 Condition: very good Inspection and test run possible by appointment Without exhaust system, as a central exhaust system is used at the current location. Dsdezxrv Eepfx Albewb The reference point limit switches in the X, Y, and Z axes have already been converted to proximity switches. The system is financed through a lease. Sale, buyout, direct settlement, or transfer of the contract will be arranged in coordination with the financing partners involved. Sale exclusively to commercial operators/companies. No warranty; liability for defects is excluded in the purchase contract to the extent permitted by law. The system will be delivered in working order with installed control and marking software as well as the activated options. Customer-specific jobs/production programs, article, serial number, UDI and process data will be deleted before handover for data protection and confidentiality reasons. According to the manufacturer, it is generally possible to partially upgrade or modify the machine according to needs. The type and scope of such a modification must be agreed upon by the buyer directly with the manufacturer or service partner and is not part of this sales offer.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Equipment: brochure finisher, Equipment: Counter Color: 3,469,135 B/W: 881,076 Fiery Color Controller E-43-A Vacuum Feed LCIT RT5100 Finisher SR5050 Buffer Pass Unit Type S3 Scanner Monitor, Keyboard, Mouse The Ricoh Pro C7100S is a powerful digital printing system for professional production printing, combining impressive offset-like quality with high speed (up to 80 pages/min), flexible media handling (up to 360 g/m²) and an integrated scanner, making it ideal for demanding print service providers. Reliable High-Performance Production The Ricoh Pro C7100S is the ideal solution for print shops, agencies, or in-house print departments that want to take their productivity and media versatility to the next level. With a constant printing speed of up to 80 pages per minute (in color and black and white) and a maximum monthly volume of up to 240,000 pages (duty cycle up to 700,000 pages), this system delivers maximum efficiency for both small and large print runs. Excellent Image Quality Thanks to the modern VCSEL laser technology and a resolution of up to 1,200 × 4,800 dpi, you get razor-sharp text, the finest color gradations, and accurate image reproduction. The advanced PXP-EQ toner process expands the color gamut and ensures that the first print is just as brilliant as the last. Includes Color Controller (Fiery) Equipped with an external/integrated Fiery Color Controller (e.g., E-43A / E-83A) for seamless integration into your workflow. Enables professional color management, RIP acceleration, and easy handling of variable data printing jobs (VDP). Dwodpozbyh Aefx Albsb Technical Data at a Glance: - Model: Ricoh Pro C7100S (MFP / incl. scanner) - Printing Technology: Laser / 4-color printing system - Speed: 80 pages/minute - Max. Paper Size: A3+ (oversize) - Paper Weight: 52 to 360 g/m² - Max. Paper Capacity: Up to 16,200 sheets - Dimensions (W x D x H): 1,320 × 910 × 1,218 mm - Weight: approx. 580 kg Subject to prior sale and errors.

Condition: used, Year of construction: 2023, functionality: fully functional, workpiece height (max.): 60 mm, HOLZ-HER CNC - Dowel Drilling & Insertion Machine POWER - PIN 7605 Workpiece thickness: 12 - 60 mm Workpiece width: minimum 150 mm (horizontal & vertical processing) Workpiece length: min. 60 mm, max. unlimited (limited when using positioning stops) Software: Campus V8 Power-Pin (1x license) Continuous LED strip for easy orientation and status indication Dowel insertion unit DA102 for pre-glued dowels as well as for untreated dowels when used with white glue Glue application system LS2 with electronic monitoring of the nozzle needle Dwedpfsyzg Dfox Albjb ECO MODE for energy-efficient operation Drilling unit BA102 (horizontal), 3-spindle MOT3 package – motorized adjustment of drilling depth 2D barcode scanner 21.5" touchscreen The POWER-PIN dowel machine is suitable both as a standard dowel machine and as an ideal addition to, for example, nesting or console machines. From cabinet furniture to premium solid wood drawers from 12 mm material thickness, the 7605 is the ideal solution for precise drilling and insertion of wooden dowels. The continuous LED strip provides constant machine status indication and assists the operator by showing the correct workpiece position for insertion. The integrated barcode scanner can be used to read DataMatrix codes, for example, which contain all machining information about the workpiece. Drill positions and drilling depths are automatically set and approached by the machine – ensuring maximum precision and efficient operation. The machine has been refurbished at the Voitsberg factory and the software has been updated to the latest version available at the time of refurbishment! Delivery, installation, and commissioning training for the machine can be arranged directly with us at an additional cost. The machine is currently located at our delivery warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be legally binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 2018, functionality: fully functional, arm reach: 2,500 mm, Equipment: documentation/manual, For sale: A high-quality HEXAGON Absolute Arm 8525 (7-axis) with RS5 laser scanner, purchased new at the end of 2018. The system has been carefully maintained, used exclusively in an industrial environment, and serviced regularly. The measuring arm is ideally suited for: # Quality control # Incoming goods inspection # In-process measurements # Reverse engineering # 3D scanning and surface capture A valid calibration / ISO-10360-12 certificate is available and can be supplied upon request. Technical data (measuring arm) # Model: HEXAGON Absolute Arm 8525 # Axes: 7 # Measuring volume: 2.5 m # Encoders: Absolute encoders & SMART sensors # Zero-G counterbalance with SmartLock & HomeDock # Wrist display with haptic feedback # SpinGrip & SpinKnob # Base plate with mounting ring RS5 Laser Scanner (installed) Dwjdpsy Iagaofx Albob # Premium RS5 laser scanner for point and surface scans # Operation in standard or compact mode # Removable pistol grip (sizes: small / medium / large) # ODU-USB & ODU twin cable (USB/LAN) # Certified scan report for arm + scanner Comprehensive accessories (see photos) ✔ Control Pack 3 (wireless, installed) ✔ TESA / TKJ CFRP probes (including 3 mm / 6 mm ruby, 15 mm steel) ✔ Calibration sphere & length gauge ✔ Magnetic mounting plate ✔ Block spring set ✔ Hook wrench ✔ Transport & accessory case (original HEXAGON) ✔ Power supply, dust cover ✔ PolyWorks USB dongle (for Inspector, license status on request) Software # PolyWorks Inspector™ Premium (original purchase) ➡ License details / transferability to be clarified upon request Your advantage # Significantly more affordable than new # Immediately available # Proven industrial quality by HEXAGON # Ideal for QC, contract measurement, prototype construction & manufacturing Inspection & Shipping # Inspection and testing by arrangement possible # Shipping carefully packaged in the original case # Collection preferred

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 25,000 mm, CMM machine manufactured in 2020. This KEYENCE WM c3000 includes a measuring range of up to 25 m and operates within a temperature range of 0 to 40°C. The delivery scope features a camera tripod, laser scanner, handheld tactile probe unit, and various measuring tips. If you are looking to get high-quality measurement capabilities, consider the KEYENCE WM c3000 machine we have for sale. Contact us for further details. • Input Voltage: 24 V DC • Input Current: 1.7 A • Measuring Range: Up to 25 m • Operating Temperature Range: 0 to 40°C • Interface Ports: USB, Power Input • X-axis Travel: 25,000 mm • Y-axis Travel: 12,500 mm • Z-axis Travel: 12,500 mm • Measurement Volume: 25 m × 12.5 m × 12.5 m • Calibration Date: March 03, 2022 Scope of Delivery / Included Components: • Camera tripod with black carrying bag Dodpfx Alszggw Tjbjwb • Stand / Base • Laser scanner (WM-P6200 compatible series) and handheld tactile probe unit in a heavy-duty rolling hard-shell transport case • Component accessory box with various measuring tips/styli • Position-tracking magnets for reference points and calibration • Power supply units (AC adapters) and connection cables • Calibration Certificate (2022) • Operating Manual – Short Version • Operating Manual – Full Version • Printed technical documentation / instruction manuals

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table that rotates 180 degrees with each cycle. In the middle part of the machine frame, there is the working area with the welding station, the tool (on the rotary table), and the clamping device for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area with a laser-safe enclosure. The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic data Machine equipment: 1 complete machine frame with enclosure, substructure, and safety devices, painted Adjustable machine feet, designed for transport with a forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is permanently mounted on the rear of the machine. Laser system manufactured by IPG. 1 fiber laser, 300W cw, at the fiber optic end, 1070nm, completely air-cooled. 1 power supply for the laser unit, target beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour. 1 scanner - 20 aperture. Optics, F-Theta lens, focal length determines the processing field and processing distance. 2x base tool, tool coding with transponder. Clamping/tensioning system for holding a mask with absolute encoder. with pneumatic clamping system for controlled pressing of each welding part. Pneumatic air shower for protection of the lens housing. Microbox PC427B incl. RTX (Siemens). Pre-installed software, Siemens S7 PLC. Profibus, Profinet, Ethernet, RS232 interface. Touch panel 15" for operation and input of data/parameters. Machine lighting. Connection flange for external extraction system. Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Permanently screwed to the machine frame. Dodpfx Alezgaazobewb Area required W x D: 5400 x 5400mm Technical data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse rating: 16A Exhaust: Nominal size ∅160 Airflow rate 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: used (Changes and errors in the technical data are reserved!) We are happy to answer any further questions you may have by telephone.

Year of construction: 2005, operating hours: 51,230 h, condition: like new (used), functionality: fully functional, machine/vehicle number: C130 86/357, The machine is currently being completely overhauled. All mechanical wear parts and repair parts are being replaced. The complete electronics will be brought up to date. Available from Q2 2025, the price is approx. 50% of a new machine Secure this unique opportunity. Contact us, we can also integrate your specific requirements. Technical data C130 Output: max 120 cartons Pitch: 5" Carton: max.100x85x150mm Dwodpotpazisfx Albeb No. of Blister max.10 Blister stack height: max. 80mm Type of closure: tuck-in Code Reader:LEATUS 6012 with Scanner 2 Flap Discharge Conveyor GuK: Leaflet Folder

Condition: used, Year of construction: 2017, functionality: fully functional, MHS (VanRiet) sorter – disassembled and prepared for transport (OFFER EXCLUDES SORTING STATIONS) Total: approx. 660 m of conveyor belts and 60 m of sorting line. Sorter ready for transport. The sorter consists of: a) one line of roller conveyors b) parallel to each outbound line (3 lines) and to the returns line (1 line), there is a line (conveyor belt) for removing unnecessary cartons (leading outside the building to a baling press – not included in this offer) c) one line with 46 package drop-off locations, each equipped with a scanner to determine the size and weight of individual packages The capacity of this sorter is 6,000 packages per hour. Additional photographic documentation illustrating the technical condition of the items and components being valued, as well as detailed components of the sorter, has been included in the valuation. Djdpfx Aezwxmholbjwb The operating principle of the sorter involves packing the item for shipment and assigning the package to a specific transport company. The item should be packed in a box or polybag. Then, an employee scans the item and creates a label for the box or polybag. Information about the box/container is sent by the sorter to the VanRiet controller. In the meantime, the box/container is loaded by an employee onto the loading line. Products are transported down the line and then combined onto a single conveyor line. At the end of the line, a scanner with a camera identifies the product, measures its dimensions, and then the product is sorted to a designated output (package pick-up location). The MHS (VanRiet) sorter is designed to handle products of various dimensions. It handles cartons with lengths from 150-800 mm, widths from 100-600 mm, heights from 10-400 mm, and weights from 0.25 kg to 32 kg. Polybags with lengths from 200-550 mm, widths from 150-550 mm, heights from 13-400 mm, and weights from 0.25 kg to 10 kg. The sorter can handle up to 6,000 packages per hour, and shipments are divided into one of 46 destinations. The general layout of the sorter is shown in the diagram below. Lines 1-3 are outbound lines, and line 4 (added in 2020) is used for receiving returns.

Year of construction: 2014, condition: ready for operation (used), Quality scanner manufactured in 2014. This MICROTEC GOLDENEYE GLD 600 DSC is designed for the inspection of large boards and panels up to 1.8 meters in width. It integrates geometric, visual, and X-ray multi-sensor cameras to assess both external and internal properties of lumber, providing a comprehensive evaluation of material quality. If you are looking to get high-quality inspection capabilities, consider the MICROTEC GOLDENEYE GLD 600 DSC machine we have for sale. Contact us for further details. • Max board/panel width: up to 1.8 m • Inspection capabilities: geometric, visual, and X-ray sensors to assess external and internal material properties for comprehensive quality evaluation Dwodozvvb Tjpfx Albjb • Application: Inspection of large wood boards and panels • Units available: 2