Used Saw Splitting Machine Spq300 for sale (65,624)

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold Dsdjfibfajpfx Ac Njun The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Dodjfibd Tepfx Ac Njun Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Dsdpfxjfh R Tue Ac Njun Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 Dodefibfgepfx Ac Nsun 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.

Condition: used, Year of construction: 1959, functionality: fully functional, Sharpening machine for sharpening frame saw blades. Inspection possible. Dujdpfx Asx Tak Njc Nsn

Condition: new, Year of construction: 2025, machine/vehicle number: MR006643, The best-selling Putsch-Meniconi! This machine is ideal for cutting commonly used sheet materials such as wood, plastic and sandwich panels. The machine is equipped with extraction on the main saw, a dust extraction hood for horizontal cutting, and the ECO rear wall extraction system for vertical cutting. Machine is fitted with the following options: - Rear support for small workpieces - Strip stop Dsdpfxex S U Sfo Ac Neun - ECO extraction system, channeled extraction during vertical cutting Technical specifications: - Maximum cutting length: 3200 mm - Maximum cutting height (horizontal): 1900 mm - Max. cutting height (vertical): 1700 mm - Maximum cutting depth: 60 mm - Maximum saw blade diameter: 250 mm - Saw blade speed: 5300 rpm - Motor power: 4 HP - Serial number: 25130034

Condition: new, Year of construction: 2020, machine/vehicle number: MR006644, This SVP950 is a powerful vertical panel saw. The machine is equipped with, among other features, variable speed control on the saw unit. This SVP950 is a robust vertical panel saw machine. It features variable speed control on the saw unit and is equipped with digital readouts for both horizontal and vertical cutting. The SVP950 offers a cutting depth of 80 mm and is powered by a strong 7.5 HP motor, making it suitable for processing thicker materials. It is also suitable for plastics, where a lower speed is desired. This is an ex-showroom machine directly from the manufacturer, allowing us to offer it at a competitive price with a full new-machine warranty. The machine is equipped with the following options: - Rear support wall for small workpieces - Variable speed: 2,000 – 6,000 rpm - Electronic display for horizontal measurement indication - Electronic display for vertical measurement indication Dujdjx S U I Hspfx Ac Nen - ECO extraction system: channeled extraction during vertical cutting Technical specifications: - Maximum cutting length: 5300 mm - Maximum cutting height (horizontal): 2100 mm - Maximum cutting height (vertical): 2200 mm - Maximum cutting depth: 80 mm - Maximum saw blade diameter: 300 mm - Motor power: 7.5 HP - Serial number: 20950017

Condition: good (used), Year of construction: 1997, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Dusdpfjtqfvyjx Ac Nen

Condition: good (used), Year of construction: 1987, functionality: fully functional, saw blade diameter: 375 mm, cutting range round steel at 90°: 135 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 680 kg, Semi automatic circular saw, blade Ø 375 mm, capacity Ø ca. 135 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, hydraulic vertical clamp, 1 horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device, measuring device 2 meters; dimension 85x110x180 cm, weight ca. 680 kgs Dsdox Dl Dmspfx Ac Noun

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Duodpfx Aowp Ipxec Non

Condition: new, Year of construction: 2023, The ALTENDORF F 25 offers everything that a sliding table saw a sliding table saw must be able to do. Whether in your first own workshop, for daily use, in industrial production or as a or as a powerful second machine. The F 25 is the space-saving all-rounder that simply makes you makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded profiles can be easily processed thanks to optimum precision outstanding cutting quality. The one-sided swivel saw blade also enables angle cuts. The smooth-running double roller carriage, based on the Altendorf system, as well as the digital display of height and height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, 3200 mm swiveling, man. Height and swivel adjustment, parallel stop with man. Fine adjustment, angle mitre fence, large extraction hood, PSV ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Rip fence: 1,000 mm with Digit X Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Crosscut fence extendable up to: 3,450 mm, Dusdeqvn Rujpfx Ac Nen speeds: 3,600 / 4,200 rpm, Motor power: 5.5 kW, 7.5 HP, work table height: 880 mm Type: F 25 Version 5 5.5 KW (7.5 HP) 2 speeds Rip fence Digit X, 1000 mm Large extraction hood PSV Without scoring unit, prepared for retrofitting a scoring unit installation of a scoring unit Special price ex stock 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 1986, Used, good condition Make: Altendorf Type F45 Year of manufacture: 1986 Machine No. 86-4-143 GS-tested Motor: 5.5 kW Carriage length: approx. 2500 mm Cutting width: approx. 800 mm Pivotable up to 45° Saw blade diameter: 450 mm Parallelogram guard Miter stop Extraction connection: D 80 and 120 mm Space required: approx. 2500 mm x 1600 mm x 1500 mm Weight: approx. 1000 kg Dsdpfxowhgd Ss Ac Noun Storage location: 54634 Bitburg, Germany, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: excellent (used), Year of construction: 2011, Altendorf Panel Saw F 45 Double roller carriage with carriage length 3000 mm Cutting width: 1300 mm with Digit X Dsdpfx Aexiv Dhec Nsun Drive power: 5.5 kW Saw blade diameter: 500 mm 2-axis scoring unit Table extension: 840 mm Angle-mitre fence Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: Djdew D T Dkspfx Ac Neun T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2022, machine/vehicle number: MR006645, This SVP420 is a very high-end vertical panel saw. It is a showroom machine with numerous options and an attractive price point. In addition to the standard Putsch features such as precision-ground guides, a rigid frame, and a cast aluminium saw unit, this machine offers additional extras. The machine is equipped with linear guides for the adjustment of the saw unit. It comes with an automatic adjustable stop for vertical cutting (POSI system). This unit is an ex-showroom machine from the manufacturer, allowing us to offer it at a very competitive price. High quality, with a full new-machine warranty. Duodpfex S N U Usx Ac Nen The machine is equipped with the following options: - Rear support wall for small workpieces - Additional measuring rail with stop below the length stop - Strip measuring stop - Depth adjustment - Dust collection bin for horizontal cutting - Automatic length stop POSI system Technical specifications: - Maximum cutting length: 4200 mm - Maximum cutting height (horizontal): 2080 mm - Maximum cutting height (vertical): 2200 mm - Maximum cutting depth: 60 mm - Maximum saw blade diameter: 250 mm - Saw blade speed: 5300 rpm - Motor power: 5 HP - Serial number: 22420021

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Dry splitting machine for leather, working width 1800 mm Duedpfx Acox S Ew Eo Non

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: GM010.0396, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, table length: 840 mm, power: 5.5 kW (7.48 HP), Factory-refurbished Altendorf F45 with ProDrive control system! TECHNICAL DETAILS Cutting Data Cutting length: max. 3,200 mm Cutting width at rip fence: 1,300 mm Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Carriage length, double roller carriage: 3,200 mm Table Data Duodsxc Uq Hspfx Ac Non Table length: 840 mm Performance Data Power output: 5.5 kW MACHINE DETAILS Machine height: 910 mm Motor power: 5.5 kW (7.5 HP) Dust Extraction Connection Extraction, top: Ø = 80 mm Extraction, bottom: Ø = 120 mm Negative pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Lighting Continuously variable speed control Scorer unit LED lighting 3-axis scorer including park position On/off switch on the double roller carriage Angle/miter fence Parallel stop DIGIT X 1,300 mm Front support roller Second support on the double roller carriage

Condition: good (used), Year of construction: 1990, machine/vehicle number: 103 2583310, Offer 25326 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: - Round: 130 mm - Square: 120 mm - Rectangular: 300 x 40 mm or 240 x 80 mm - Cutting capacity at 45°: - Round: 130 mm - Square: 110 mm - Rectangular: 245 x 40 mm - Mitre adjustment left & right each 0–90° - 2 cutting speeds - Drive: 400 V / 1.26 / 2.5 kW - Saw blade feed rate hydraulically infinitely adjustable - Coolant system Duedpfx Acox Sxx As Nen - Required space approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Infeed and outfeed roller conveyors with length stop, each 6000 mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Sharpening machine for gang saws with wet grinding unit. Frequency-controlled grinding wheel speed. Tooth pitch 25 mm. Tooth profile: PZ / arc tooth. Stepless feed speed up to 60 teeth/min. Blade width 60 – 160 mm. Automatic grinding wheel infeed. Preselection of grinding passes. Wet grinding unit with pump and tank. Dujdpox A D Easfx Ac Non

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, Power supply: 380–420 V / 50 Hz Total power: 5.5 kW Saw motors: 2 × 2.2 kW Saw blade: Ø550 mm Max. cutting length: 5000 mm Min. cutting length: 360 mm at 90° Cutting angles: 45° and 90° Repeatability: ±0.1 mm Air consumption: 60 L/min (0.5–0.8 MPa) Fully CNC controlled Two saw heads that can operate independently or synchronously Automatic positioning of the moving saw head via servo drive Djdpfx Ajx R U Epoc Nsun Automatic height measurement system for increased precision at 45° Touchscreen control with clear interface Integrated label printer (traceability & workflow) Infinitely adjustable saw feed Very stable and heavy machine base

Condition: as good as new (ex-display), functionality: fully functional, Displayed price is for model 405MAN. For the best price, please contact us directly by phone. Panel saw in stock with parallel guide (1250mm), fitted with a scorer. The A405A/NC single-axis panel saw is the ideal machine for high-precision cutting of sheet materials for kitchen cabinets, furniture, and more. The NC rip fence provides operators with the added convenience of setting the saw width automatically via a control panel. This saves time and delivers a high level of accuracy and repeatability. The 3200 mm sliding table is made of precision aluminum extrusion and runs on precision linear guide rails. PICK-UP: Almelo, Netherlands Duodjxxyd Ropfx Ac Njn Phone:

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: CHD 251R2, grinding wheel diameter: 200 mm, input current: 380 A, We offer this excellent condition Vollmer CHD 251R2 ND300 saw-blade sharpening machine. The CHD 251 R2 automatic grinding machine with ND 230 Robot system as a service for fully automatic machining with 5 bay loading. Year of construction 2002. Duedox R Eydopfx Ac Nsn Manufacturer: Vollmer Werke Maschinenfabrik GmbH Model: CHD 251R2 ND300 Year of manufacture: 2002 Serial number: 575 Available Now If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2009, Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) Dodpfxex Ruv Ie Ac Noun - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles

Condition: used, Year of construction: 2000, functionality: fully functional, table width: 975 mm, table length: 810 mm, SECOND-HAND BAND RE-SAWING MACHINE MEBER MOD. SR900 Dedpfxsx Rt Aao Ac Nsun - Table dimensions mm. 975x810 - Motor Kw 11 - Year 2000 (CE)

Condition: excellent (used), Year of construction: 1994, VOLLMER CHP 025 with Hollow face teeth and cheap breaker teeth device Dujdpfsx Rriljx Ac Non