Used Saw Motor for sale (26,871)

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm throat 400 mm workpiece height 280 mm saw band length 3200 - 3400 mm table - swivable +/- 20 ° table surface area 600 x 600 mm table - tiltable +/- 45 ° Nsdpfexcp Sfsx Abwsld total power requirement 1,7 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Nledozpb Eqopfx Abwod

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Nljdszpbufspfx Abwsd Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: good (used), Year of construction: 2008, The Striebig Control 6216 (year of manufacture 2008) is a premium-class vertical panel dividing saw with a cutting area of approximately 5300 x 1600 mm, designed for the precise cutting of wood, plastics, and aluminum composite panels. Technical features: Cutting area: approximately 5300 mm in length Nodpfx Abezpbcveweld 1600 mm in height (model 6216) Control: fully electronic positioning and touchscreen operation for serial cuts. Cutting depth: up to 80 mm. Application: optimized for fully automatic workflows and high repeatability. Location: will arrive in week 33 at warehouse 54634 Bitburg.

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Nlsdpfszn N Iksx Abwod

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer: Stöber, DC geared motor type C002NF-0047-PF112 -Speed: 0-641 rpm -Engine: Type PF112 -Voltage: 160 V -Power: 0.6 kW -Shaft: Ø 20 x 40 mm -Dimensions: 395/160/H195 mm Nsdezn Nmajpfx Abweld -Weight: 19.5 kg

Condition: ready for operation (used), Siemens 6SL3120-1TE26-0AA1 SN:T-V72031392 Single Motor Module, serial number as per photo, used, heavy signs of wear, 100% functional Nodpfxjxag U Ej Abwjld

Condition: excellent (used), HOLTEC HFT 21 packet cutting saw with automatic feed – year of production 1986 – German production – electric roll feed Technical parameters: - engine power 11 kW - guide length 1700 mm - package width 1300 mm - package height 1300 mm - cutting length max 4500 mm - roll width 1300 mm Nljdpfx Ajiwfm Uebwed - spacing between rolls 900 mm - roller diameter 160 mm - height of the rollers from the base 730 mm - total length 9400 mm Transport dimensions 650 x 200 x 256 cm weight 2000 kg

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 450 mm, saw blade diameter: 450 mm, working width: 870 mm, track width: 450 mm, chain width: 450 mm, disc diameter: 450 mm, – very good condition – manufactured in the Czech Republic – year of manufacture: 1998 TECHNICAL SPECIFICATIONS: – track width: 450 mm – cutting height: 160 mm – max. blade diameter: 450 mm – main motor power: 45 kW – min. cutting length: 800 mm – max. input material width: 870 mm – shaft diameter: 65 mm Nedpfxoxtabxe Abwjld – sleeve diameter: 80 mm – feed adjustable via frequency inverter – feed speed range: 4-40 m/min – three rows of anti-kickback pawls – connection spigot diameter: 300 mm – dimensions (L/W/H): 240 x 210 x 200 cm – weight: 3300 kg

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, cutting length (max.): 3,000 mm, cutting height with scoring (max.): 40 mm, cutting width at rip fence: 1,250 mm, trimming length: 3,000 mm, Equipment: saw blade guard, - Austrian-made - With scorer Nlsdpfsxm Rm Sox Abwjd TECHNICAL SPECIFICATIONS: - Table carriage length: 3000 mm - Max. main blade diameter (without scorer): 315 mm - Max. main blade diameter (with scorer): 250 mm - Blade bore diameter: 30 mm - Max. cutting height with 250 mm blade: 40 mm - Spindle lock - Main blade adjustable up/down and at an angle - Blade guard - With carriage - Cutting width at the fence: 1250 mm - Main motor: 4 kW - Fence with latch: 1700 / 2600 mm - Scorer - Max. scorer blade diameter: 80 mm - Scorer spindle diameter: 20 mm - Scorer motor: 0.65 kW - Extraction port diameter: 100 mm - Shipping dimensions (L/W/H): 325 / 190 / 130 cm - Weight: 500 kg

Condition: like new (used), - machine in stock - after a technical review - very good condition - ideal for the production of chairs   TECHNICAL PARAMETERS: - 7.5 kW main engine - two dugouts - pneumatic derrick control - pneumatic digging - wheel diameter 850 mm - 40 mm tape width - maximum length of the element 1300 mm - maximum width of the element 800 mm - maximum height 120 mm - two pneumatic side clamps - two pneumatic working distances - continuous feed regulation - hydraulic feed - 1.85 kW pump motor - receiving conveyor 180 mm x 2000 mm - 0.25 kW belt conveyor - central lubrication   Njdpfod Dc E Aex Abwsld Machine dimensions: - length 400 cm - 230 cm wide - height 250 cm - weight ~ 2000 kg

Condition: good (used), Year of construction: 1993, COSMEC SM 400 multi-saw - after the technical review - very good condition - Italian production - year of production 1993 TECHNICAL PARAMETERS: Nlodpogyz Rvjfx Abwsd cutting width 400 mm cutting height 160 mm engine power 37 kW smoothly adjustable feed speed spindle diameter 55 mm sleeve diameter 70 mm four rows of anti-recoil pawls the three upper pressure rollers table width 710 mm minimum element length 700 mm shaft height adjustment guide ruler laser central lubrication spigot diameter 200 mm dimensions of the machine (length / width / height) 220/190/180 cm weight 1800 kg

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 Nsdpsg Db U Aefx Abweld TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Year of construction: 2005, condition: used, functionality: fully functional, – Polish production – DTR – Used machine, very good condition TECHNICAL PARAMETERS: – max. processed log diameter: 320 mm – minimum processed log length: 1600 mm – number of spindles: 2 pcs – spindle diameter: 70 mm – spindle working length: 230 mm – saw blade diameter: 450 mm – main motor power: 75 kW – feed motor power: 2 x 2.2 kW – upper feed rollers motor power: 1.1 kW – side discharge feed rollers motor power: 2 x 1.1 kW – 2 geared feed rollers – infeed table length: 2100 mm – outfeed table length: 2600 mm – machine dimensions (L/W/H): 600 x 200 x 185 cm – weight: ~3800 kg Nljdpfxowu U Ifs Abwjd

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller Nlsdpfx Abow H R R Howod – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: used, Discharge take-off table: - total length 7850 mm - total width 1200 mm Nedpfx Abexuiq Eswjld - four upper hold-downs - prism guide 70 mm - hydraulic feed

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table Nsdpfx Aboqup Anowjld - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. Nodpfoq Ii Dljx Abwold - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Year of construction: 2005, functionality: fully functional, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 600 mm, saw blade diameter: 500 mm, saw blade bore: 30 mm, table length: 3,000 mm, table width: 620 mm, – Year of manufacture: 2005 – Polish production – DTR and CE TECHNICAL PARAMETERS: – Cutting width: 600 mm – Cutting height: 140 mm – Blade diameter: 500 mm – Main motor: 5.5 kW – Pneumatic clamping Nsdpfow H R Tbsx Abwold – Nozzle diameter: 120 mm – Saw spindle diameter: 30 mm – Feed table: 200 x 62 cm – Discharge table: 300 x 62 cm – Transport dimensions (L/W/H): 300 x 190 x 150 cm – Weight: 650 kg

Condition: used, functionality: fully functional, product height (max.): 120 mm, product length (min.): 585 mm, product length (max.): 6,050 mm, product width (max.): 440 mm, - Made in Germany TECHNICAL SPECIFICATIONS: - Maximum cutting length: 6050 mm - Minimum cutting length: 585 mm - Cutting height: 120 mm - Maximum material width - Saw blade diameter: 400 mm - Number of cutting units: 4 - Cutting unit power: 4x 3 kW - Feed motor power: 1.1 kW Nodpfxoxdxv Ns Abwjld - Material feed via chains - Feed speed adjustable with gear motor

Condition: used, WD Edger: Nledpfsxuipbsx Abwod - Motor power 55 kW - Two movable sleeves - Sleeve length 60 mm - Max saw blade diameter 400 mm - Hydraulic saw blade spacing - Four lower feed rollers - Two upper feed rollers Centering roller table: - Total length 7000 mm - Total width 160 mm - Five lower feed rollers - Roller diameter 160 mm - Length 1000 mm - Four upper hydraulic hold-downs - Six centering material clamps - Hydraulic feed

Condition: ready for operation (used), KUPFERMUHLE four-sided planer with additional table, multi-saw 600x200mm - after technical overhaul - made in Germany - STRIPPING HEIGHT TWO SIDES 200 mm - ideal for wet wood - electrical height adjustment Nlodpfx Abor Iik Ijwsd - double feed chain - additional pre-table with head 340 mm - additional material feed system TECHNICAL PARAMETERS: planing width 600 mm planing height on two sides planing height on four sides 200 mm 100 mm power of vertical spindles motors 2 x 5.5 kW power of lower shaft motors 7,5 kW power of top spindle motor 11 kW power of first head motor 4 kW power of multi-saw engine 15 kW vertical heads adjustable four top drawing shafts three bottom drawing shafts two receiving drawing rollers 4 knives per shaft shaft diameter 145mm six types of feed speed 7 / 9 / 11,5 / 14 / 18 / 23 m/min 2 rows of anti-rejection pawls diameter of spindles 40 mm blade diameter max 250 mm spindle length 340 mm overall dimensions (L/W/H) 400 x 210 x 180 cm weight 3900 kg

Condition: good (used), Year of construction: 2010, RAIMANN Econorip 310 multi-saw - German production - CE marking - Quickfix disc sliding system Nlodpfx Abjh Tm Alswjd - year of production 2010 TECHNICAL PARAMETERS: - cutting height 110 mm - cutting width 340 mm - engine power 22 kW - adjustable feed on the inverter - electric shaft height adjustment - electric adjustment of the pressure height - spindle in the Quickfix system (the possibility of changing the dimensions without the need for tools) - track diameter max 350 mm - spindle diameter 65 mm - sleeve diameter 80 mm - four upper pressure rollers - four rows of anti-jet pawls - boot for short elements - max width of the element 700mm - minimum element length 300 mm - central lubrication - diameter of the stub pipe 250 mm - ruler Machine dimensions: 190x185x165 cm weight 1800 kg

Condition: ready for operation (used), functionality: fully functional, power: 0.004 kW (0.01 HP), cutting height (max.): 250 mm, cutting width (max.): 450 mm, saw blade diameter: 400 mm, overall weight: 7,500 kg, Two-shaft multi-saw 2x110 kW TOS SVITAVY PWR 422 - Czech production - twin-shaft - DTR documentation TECHNICAL DATA: - max cutting height: 250mm - track width: 450mm - shaft width: 450mm - disc bore diameter: 80mm - shaft diameter: 60mm - min disc diameter: 300mm - max disc diameter: 400mm - max width of input material: 860mm - min length of processed material: 1500mm * From above: - Rejectors: + - Drawing shaft, metal pneumatically pressed: + - rejects: + - drawing shaft, metal, pneumatically pressed: + - pressure: + - saw shaft: + - pressure: + - 2 pulling shafts, metal pneumatically pressed: + * Bottom: - metal roller, sliding: + - guide: + - rejects: + - track: + - saw shaft: + - track: + - infinitely adjustable feed speed on inverter: 4-40m/min - main motors: 2x110kW - feed motor: about 3kW - electric lifting of the body up/down: 0,55kW - electric adjustment of saw shafts: 2×0.18kW - central lubrication - diameter of the extraction stub: 2x300mm - dimensions L/W/H: 3400x2650x2200mm Nsdpfxjri Nvvo Abwold - weight approx: 7500kg

Condition: used, Year of construction: 2013, functionality: fully functional, – CE certificate – Year of manufacture: 2013 TECHNICAL SPECIFICATIONS: – Max. blade diameter: Ø 380 mm – Min. blade diameter: Ø 200 mm – Track width: 300 mm – Max. workpiece width: 750 mm Nlsdew H R N Nepfx Abwed – Cutting height: 10-120 mm – Set for short workpieces INCLUDED for FREE!!! – Spindle diameter: Ø 55 mm – Sleeve diameter: Ø 70 mm – Min. workpiece length: 600 mm – Working table height: 740 mm – Main spindle speed: 4000 rpm – Air requirement for extraction: 3800 m³/h – Extraction air velocity: 25-35 m/s – Extraction outlet: 2 x Ø 150 mm – Table dimensions: 1760×770 mm – Number of revolutions: 4000 rpm – Variable feed speed via inverter: 4-30 m/min – Electric cutting height adjustment – Feed motor power: 2.2 kW – Total power: 39 kW – Digital feed speed display – Automatic lubricating system with adjustable settings – Automatic star-delta starter – Overall dimensions (L/W/H): 1900 x 1600 x 1750 mm – Weight: 2600 kg